Electronic Board Operating Instructions [Stand (option)] [Wall-mounting (option)] Stand and wall-mounting kit are optional. With Installation Manual (for qualified service personnel) UB-7325 Operating Instructions Model No. Installation Manual • Before operating this unit, please read these instructions completely. After reading them, preserve them carefully for future reference. • Because of the nature of the print film, all the printed text will remain on the film.
Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Accessories • • • • • Thermal transfer film . . . . . Markers (red, black, and blue) Operating Instructions . . . . Eraser . . . . . . . . . . . . . Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q’ty . . .1 1 each . . .1 . . .1 . . .1 Q’ty • Letter size copy paper . . . . . . . . . . . . . 20 • Software CD-ROM . . . . .
Table of Contents Page For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before You Start Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 • CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • Control panel . . . . . . . . . . . . . . . . . . . . . .
For Your Safety For Your Safety CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE. THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE. The product should be used only with the power cord that is supplied by the manufacturer.
Precautions Precautions Do not position the electronic board in a location where it is unstable. Do not put drinks, other liquids or heavy items on the tray or screen. After installing or moving the electronic board, lock the casters and set the fall-prevention extension legs. Operating Instructions Never remove the cover, take apart or modify the product. This will void the warranty.
Precautions Do not lean against the screen or on the cover (lower), even if the electronic board is mounted on the wall. CHOKING HAZARD Keep the marker’s cap out of reach of children to prevent swallowing. Have the unit installed, removed and disposed of only by qualified service personnel. When the unit will no longer be used, in order to prevent it from falling, do not leave the unit installed, but remove it. If the unit falls, it can cause injury.
Precautions • Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents as this may cause stretching and/or discoloration of the screen. • Do not install the unit in strong sunlight or strong lighting. Proper copying may become impossible. • Do not install the unit in locations where the temperature may change suddenly as this may disable the unit’s ability to make copies. Screen Film • Make thick and dark lines inside the copying area.
Part Names and Functions Part Names and Functions Scanner Screen One screen (with no ruled lines) of four screens can also be used for a projector (see page 14). Tray Printer Stand The stand is optional. Output Port Control Panel This port holds up to 10 sheets of output paper. (See page 9 for details.) Power Switch ON Printer Open Lever OFF Push down this lever to open the printer door. AC Inlet Cord Holder Power Cord Printer Door Paper Cover USB Connector (See page 17.
Part Names and Functions ■ Control panel Contrast/Remaining Film Indicator Reverse Key Advance Key Contrast Key Copy Key Name Description Contrast/ Remaining Film Indicator This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the printing contrast used during copying.
Installing the Thermal Transfer Film Installing the Thermal Transfer Film 2) Insert the blue shaft into the front left hole. Install the thermal transfer film in the printer. 1 Set the power switch to on ( I ). Blue shaft • “ ” will flash on the Multi-Copy/Error Indicator when the thermal transfer film has run out. • The screen will move to home position and stop. ON 3) Place the blue gear on the front right groove. OFF Blue gear 2 Push down the printer open lever and open the printer door.
Loading Copy Paper the film, then close the printer door. 41) Tighten Rotate the blue gear in the direction of the arrow to take up the slack on the film. Loading Copy Paper It is possible to load up to 40 sheets of Letter size copy paper [assuming a paper weight of 80 g/m2 (20 lb.)]. Note that only Letter size paper may be used. When the unit is first used or when “ ” flashes on the Multi-Copy/Error Indicator to indicate that the unit is out of paper, load copy paper as described below.
Loading Copy Paper 2 Pull the paper cover forward as shown in the figure. 3 To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go. Guide Maximum paper limit Note • Only use Letter size copying paper having a weight of 60 g/m2 (16 lb.) to 90 g/m2 (24 lb.) as the copy paper for this unit.
Making Copies Note Making Copies This section describes how to copy text and illustrations drawn on the screen. 1 Set the power switch to on ( I ). • “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy. • The screen will move to home position and stop.
Using the Projector Screen / Replacing the Thermal Transfer Film Using the Projector Screen One of four screens of this electronic board can also be used as the projector screen. The screen has no ruled lines so the projected image is easy to see. 1 Press or more than 2 seconds to move the screen to the projector screen. • “0” is displayed on the Multi-Copy/Error Indicator while the screen advances to the projector screen. or Press or to move the screen to the screen with no ruled lines.
Paper Jams Paper Jams 4 Remove paper jams by the following procedure when copy paper does not come out of the output port or when “ ” flashes on the Multi-Copy/Error Indicator. 1 Push down the printer open lever to open the printer door. Install the thermal transfer film. • Refer to steps 3 and 4 in the section of “Installing the Thermal Transfer Film” on page 10. • “ ” flashing on the Multi-Copy/Error Indicator will go out.
Paper Jams 3 To prevent paper jams such as those caused by multiple sheets feeding at once, fan the paper thoroughly, square it, align it with the guide inside, and insert as far as it will go. 5 Turn the power on. • “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy. • The screen will move to home position and stop.
Computer Interfacing Computer Interfacing Drivers and software must be installed in your computer to use Board Image Capture, Quick Image Navigator, Panasonic-DMS, printer and TWAIN driver. ■ System requirements IBM® PC/AT® or compatible machine with a CD-ROM drive CPU Pentium® II or higher processor Interface USB 2.0 or USB 1.1*1 OS Windows® 98*2 / Windows Me*3 / Windows 2000*4 / Windows XP*5 / Windows Vista®*6 (64-bit editions are not supported.
Computer Interfacing ■ Installing Drivers / Board Image Capture 6 When the following window appears, check that the electronic board is not connected to your computer and click [OK]. The USB, printer, TWAIN driver and Board Image Capture are installed in your computer by following procedures. Note • Do not yet connect a USB cable to the electronic board. 1 Power on your computer and start Windows*1. • Log on as an administrator for Windows 2000, Windows XP or Windows Vista.
Computer Interfacing 8 • If the Autoplay dialog box appears in Windows Vista, click “Run Menu.exe”. 3 4 When the installation is completed, click [OK]. 5 6 7 ■ Installing Quick Image Navigator / Panasonic-DMS After confirming your operating system, install the software. For Windows 2000 / Windows XP / Windows Vista: Quick Image Navigator For Windows 98 / Windows Me: Panasonic-DMS If Panasonic-DMS is already installed, you do not need to uninstall it. 1 Power on your computer and start Windows.
Computer Interfacing 2 3 In the Control Panel, double-click Add/ Remove Programs (Windows XP: Add or Remove Programs, Windows Vista: Uninstall a program). Select the software you want to remove, then remove it. • To remove the USB and TWAIN driver, select Panaboard UB5-7 Driver. To remove Board Image Capture, select Panasonic Board Image Capture. To remove Quick Image Navigator, select Panasonic Quick Image Navigator.
Computer Interfacing Note ■ Scanning with the Quick Image Navigator / Panasonic-DMS For Quick Image Navigator: From the File menu, click Acquire Image... - To Import Folder... (or To Current Folder...), or click the (scanner) icon on the Toolbar. For Panasonic-DMS: Click the File menu, then click Acquire Image..., or click the (scanner) icon on the Toolbar. • The Panaboard Operation Panel appears.
Computer Interfacing ■ Panaboard Operation Panel It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is used for scanning images into the computer.
Computer Interfacing Panel Name Copy Button Description This button causes the screen to be copied. The status box displays the status of the TWAIN driver and the electronic board. Stand by: Status Box About Button Click to display information about the TWAIN driver. Help Button Click to display help information. Close Button Click to close the Panaboard Operation Panel. Operating Instructions The electronic board is stand by.
Daily Care and Maintenance Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit. ■ Caring for the eraser When the erasing surface of the eraser becomes dirty, hold down the sheet under the top sheet with your finger and peel off the dirty sheet (white or gray sheet) by pulling in the direction of the arrow.
Daily Care and Maintenance 2 Clean the Printer Head 4 Install the thermal transfer film in its original position and close the printer door. Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head. Latches Printer head (Gold) Note • For details on installing the thermal transfer film, see pages 10. • Close the printer door firmly until a click is heard. Note • Never touch the printer head or the surrounding area with your hands as this may disable copying.
Troubleshooting Troubleshooting Treat problems according to the information given in the table below. If problems still persist, call your dealer for service. Symptom Power switch is on but the indicator is off. Copied copy paper will not come out. Nothing is printed on the paper or copies are faint or blurred. Black streaks or blank (unprinted) spots appear on the copy (copy paper is dirty). A black or white horizontal line appears, or the page prints in black or blank.
Troubleshooting Panasonic Document Management System menu is remained in the Programs menu even if Panasonic-DMS is uninstalled. The USB driver or printer driver does not work properly immediately after the installation of the software. 19 18 Operating Instructions The computer does not recognize the electronic board. The old Panasonic-DMS is not uninstalled if the old version of the Panasonic-DMS has been installed before installing the new one.
Specifications Specifications Model No. General Input Block Output Block UB-7325 Power supply AC 100 - 120 V, 50/60 Hz Power consumption (Operational) 1.4 A External dimensions (Height × Width × Depth, without stand) 1396 mm × 1648 mm × 264 mm (4' 7" × 5' 4 7/8" × 10 3/8" ) Mass (without stand) 42.5 kg (94 lbs.
Installation Manual (for qualified service personnel) Table of Contents page Assembling the Electronic Board . . . . . . . . . . . . . . . . . . . . . . . 30 ●Accessories for assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ●Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Electronic Board Operations Check. . . . . . . . . . . . . . . . . . . . . 34 Repacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembling the Electronic Board ■ Accessories for assembling The package includes the parts for setting up the electronic board shown below. Make sure that all of these parts are included in the package before proceeding. No.
Assembling the Electronic Board ■ Assembly 1 Assemble the optional stand or wall-mounting kit. 2 Remove the electronic board from the shipping box. ■ If you are using a stand, refer to page 36. ■ If you are using a wall-mounting kit, refer to page 40. Remove the joints, then remove the electronic board from the shipping box.
Assembling the Electronic Board 3 Install the electronic board. Install the electronic board using the stand (option) or wall-mounting kit (option). ■ Using the wall-mounting kit (option) 1) Hang the electronic board on the optional wallmounting fixtures. ■ Using the stand (option) 1) Hang the electronic board on the optional stand. A B 2) Secure the wall-mounting fixture to the electronic board using the two wing-bolts [M5 x 12 mm (15/32”)] provided with the wallmounting kit (option).
Assembling the Electronic Board 4 6 Connect the power cord. 1) Securely fit the supplied power cord into the AC inlet on the printer unit. Check operations. Refer to “Electronic Board Operations Check” on page 34. 2) Fit the power cord into the cable holder. Cable holder 5 Wipe the screen film surface. Installation Manual Soak a soft cloth with water, wring well, and wipe the screen film surface.
Electronic Board Operations Check After assembling the electronic board, perform the procedures presented in the following table to make sure it functions properly. Points to Check Step Symptom 1 Turn on the power switch. “ ” flashes after “ ” lights up. (If not) 2 Open the printer door and attach the accessory thermal transfer film, then close the printer door.
Repacking Perform Assembly Steps 2 through 4 on pages 31 - 33 in reverse to repack the electronic board and accessories. Use the joints to fasten the shipping box. Shipping box Thermal transfer film Power cord Markers Eraser Manuals, CD-ROM Electronic board Joints Joints Joints Installation Manual Joints Joints Joints Shipping box Caution • Do not touch the screen film surface, as this may damage it.
Assembling the Optional Stand (KX-B061) ■ Accessories The package box for the optional stand includes the parts noted below; please confirm that all parts are present before beginning installation . No. Part name Illustration Stand base Q’ty No.
Assembling the Optional Stand (KX-B061) ■ Assembly 1 Assembling the stand ■ Assembling the fall-prevention extension legs The fall-prevention extension legs increase the safety of the electronic board. Fall-prevention extension legs • Caster locks are attached to the back side. Caution • Install and always set the fall-prevention legs when using the stand. • When tightening the screw , hold the nut with pliers.
Assembling the Optional Stand (KX-B061) ■ Assembling the stand Assemble with the holes toward the front. 1 1 1 2 Locking casters side (rear) Pull the fall-prevention extension legs down (fall-prevention extension legs will be fixed by the lock pin.) Locking casters side (rear) Note *1 Do not tighten the screw 38 too much. This may deform the pipes.
Assembling the Optional Stand (KX-B061) 2 Attach the fixtures 3 Assemble and install the electronic board. with the four wing-bolts. Installation Manual Refer to step 3 on page 32.
Optional Wall-mounting Kit (KX-B063) Before attempting installation of this wall-mounting kit, we strongly recommend consulting with the building manager, engineer, or architect. The installer needs to know the type of construction used for the wall intended for this installation and the location of wall studs. Selection of hardware is critical for safe wall-mounting, and depends on the nature of wall construction. Installation should not occur until this consultation takes place.
Optional Wall-mounting Kit (KX-B063) ■ Wall-mounting procedure 1 Confirm that the wall is strong enough to support the weight of the electronic board. Caution The wall must be capable of supporting at least 2,108 N [215 kgf (474 lbs.)] for UB-7325. 2 Tape the Wall-mounting template on the wall. • Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with the electronic board (UB-7325). • When taping the template on the wall, make sure it is level.
Optional Wall-mounting Kit (KX-B063) ■ Attaching the wall-mounting fixtures The electronic board must be mounted with the method most suited to the material of the wall. Three methods are presented here. (Other options may be available in your area.) ● Attaching to metal or concrete walls Stud plugs (sold in stores) are needed. Drill bit Drill eight holes in the wall. For the correct hole size, refer to the instructions for the particular stud plugs used.
Optional Wall-mounting Kit (KX-B063) ● Attaching to plasterboard walls Split-wing toggles (sold in stores) are needed. Split-wing toggle Wall-mounting fixture Plasterboard Bolt Arms Arms Insert each bolt through a hole in the wall-mounting fixture and into the hole in the wall beneath so that the arms of the splitwing toggle are horizontal. For the correct hole size, refer to the instructions for the particular split-wing toggles used.
Panasonic Communications Company of North America Unit of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 © 2004 Panasonic Communications Co., Ltd. All Rights Reserved.
