Operating instructions

Computer Interfacing
18
■ Installing the drivers
Before you use the computer interfacing function
for the first time, install the USB, printer and TWAIN
driver to your computer by following procedures.
Note
• Do not yet connect a USB cable to the
electronic board.
1 Power on your computer and start Windows*
1
.
• Log on as an administrator for
Windows 2000
or Windows XP.
*
1
Microsoft Windows operating system
(hereafter Windows)
2 Insert the CD-ROM into the CD-ROM drive.
The Setup window will appear automatically.
• Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute “Menu.exe” in the
CD-ROM from the Explorer.
3 When “Welcome” window appears, click
[Next].
4 Click [Panaboard Setup].
• To install the Panasonic-DMS software, click
[Panasonic-DMS] (see page 19).
• To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
5 Click [Install Drivers].
6 Read “Software License Agreement” carefully
and click [Yes].
7 When the following window appears, check
that the electronic board is not connected to
your computer and click [OK].
• If the USB cable is connected to the
electronic board, remove it and click [OK].
• For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required
.
• If the screen prompts to restart Windows,
restart Windows.