Operating Instructions Plasma Television Model No.
Safety Precautions Warning Handling the mains plug and lead ●Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) ●Ensure that the mains plug is easily accessible. ●Ensure the earth pin on the mains plug is securely connected to prevent electrical shock. ●An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. ●Do not touch the mains plug with a wet hand.
Caution ■When cleaning the TV, remove the mains plug ■Do not block the rear air vents ●Cleaning an energized TV may cause electrical shock. ●Blocked ventilation by newspapers, cloths, curtains, etc. may cause ■When the TV is not going to be used for a long table overheating, fire or electrical shock. period of time, remove the mains plug ●This TV will still consume some power even in the Off mode, as ■Do not expose your ears to long as the mains plug is still connected to a live socket outlet.
Accessories / Options Standard accessories □ Remote Control ●N2QAYB000353 Check that you have the accessories and items shown □ Batteries for the Remote Control (2) ●R6 (UM3) abc jkl mno tuv wxyz □ Operating Instructions □ Pan European □ Mains Lead p. 6 p. 8 p. 6 def ghi pqrs □ Clamper □ Ferrite core (2) □ Cleaning cloth □ Pedestal p. 4 and p.
TX-P58V10E Assembly screw (4) (silver) ●XYN5+F25FN Assembly screw (4) (black) Pole (2) ●THEL073N L M5 × 25 ●TBLX0128 R M5 × 30 ■Assembling the pedestal Use the four assembly screws to fasten the left and right poles to the base securely. ●Make sure that the screws are securely tightened. ●Forcing the assembly screws the wrong way will strip the threads. ●“L” or “R” mark is stamped on the bottom of the pole. ■Securing the TV Use the assembly screws to fasten securely.
Accessories / Options Installing / removing remote’s batteries 1 2 Pull open Close Note the correct polarity (+ or -) Hook Caution ●Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. ●Do not mix old and new batteries. ●Do not mix different battery types (such as alkaline and manganese batteries). ●Do not use rechargeable (Ni-Cd) batteries. ●Do not burn or breakup batteries.
Identifying Controls Remote Control VIERA IMAGE VIEWER ●Switches to SD Card viewing mode Input mode selection Standby On / Off switch ●AV - switches to AV input mode from Input ●TV - switches DVB-S / DVB-C / DVB-T / Analogue mode ●Switches TV On or Off standby Selection list Aspect ●Changes aspect ratio from Aspect Selection list ●Also possible by pressing this button repeatedly until you reach the desired aspect Direct TV Recording INPUT TV AV ASPECT MENU DIRECT TV REC Main Menu EXIT ●Press
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Example 2 Connecting DVD Recorder / VCR TV, DVD Recorder or VCR Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Rear of the TV Rear of the TV Terrestrial aerial AC 220-240 V 50 / 60 Hz Terrestrial aerial AC 220-240 V 50 / 60 Hz Cable Mains lead (supplied) AV 1 RGB VIDEO HDMI 3 Y RGB VIDEO S VIDEO COMPONENT HDMI 3 COMPONENT AUDIO AUDIO OUT IN AV 2 HDMI 2 HDMI 2 AV 2 RGB VIDEO S VIDEO AUDIO AUDIO OUT IN L L PB R R PR Y DIGITAL AUDIO OUT
Auto Setup Search and store TV channels automatically. ●These steps are not necessary if the setup has been completed by your local dealer. ●Please complete connections (p. 8 and p. 9) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions.
■Overview ●How to operate p. 12 Main Menu Picture Sound Setup Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management Digital Cinema Colour 1/2 Dynamic 60 0 30 5 0 Warm Off Auto Picture Menu Eco Mode P-NR 3D-COMB Multi Window Advanced Settings Reset to Defaults 2/2 Off Off Off Access Access Reset Advanced Settings W/B High R W/B High B W/B Low R W/B Low B Gamma Reset to Defaults 2.2 Reset (p. 14) (p.
How to Use Menu Functions ■Menu list Menu Item Picture Viewing Mode Basic picture mode (Dynamic / Normal / Cinema / THX / Game) ●Set for each input signal Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room Normal : Recommended for viewing under normal ambient room lighting conditions Cinema : For watching movies in a darkened room producing a cinema-like picture THX : Recommended for playback of THX disc (disc with “THX” logo) THX mode is used to mirror the picture
Menu Item Adjustments / Configurations (alternatives) Basic sound mode (Music / Speech) Bass Increases or decreases level to enhance or minimise lower, deeper sound output Treble Increases or decreases level to enhance or minimise sharper, higher sound output Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings (Off / V-Audio / V-Audio Surround / V-Audio ProSurround) V-Audio: Provides a dynamic enhancer of
How to Use Menu Functions ■Menu list Menu Item Off Timer Adjustments / Configurations (alternatives) Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Link Settings Setup VIERA Link Sets to use VIERA Link functions (Off / On) Q-Link Selects which AV terminal is to be used for data communication between this TV and a compatible recorder (AV1 / AV2) ●Select the connected terminal to the recorder even it is not compatible with Q-Link.
Menu Item Adjustments / Configurations (alternatives) DVB-C Tuning Menu Creates list of favourite DVB-C channels Channel List Skips the unwanted DVB-C channels or edits DVB-C channels Auto Setup Automatically sets the DVB-C channels supplied Manual Tuning Sets the DVB-C channels manually Update Channel List Updates DVB-C Channel List with keeping your settings New Channel Message Selects whether to give a notification message when a new DVB-C channel is found Signal Condition Checks the DVB-
How to Use Menu Functions ■Menu list Menu Item OSD Language Adjustments / Configurations (alternatives) Changes language for on-screen displays Selects the first and second preferred language for DVB multi audio (depending on Language Preferred Audio 1 / 2 the broadcaster) Setup Display Settings Preferred Subtitles 1/2 Selects the first and second preferred language for DVB subtitles (depending on the broadcaster) Preferred Teletext Selects the preferred language for DVB teletext service (dependin
Menu Item Adjustments / Configurations (alternatives) System Menu Shipping Condition Resets all settings, for example, when moving house System Update Downloads new software to TV Software Licence Displays the software licence information System Information Displays the system information of this TV AV Colour System Selects optional colour system based on video signals in AV mode (Auto / PAL / SECAM / M.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
