Model No.
Important Notice Do not display any still part of the image for a long period In such cases the still part of the image remains dimly on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.
● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wallhanging brackets. ● Do not apply strong force or impact to the display panel. ● Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base. ● Do not expose the TV to direct sunlight and other sources of heat.
■ Ventilation Caution Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components. Minimum distance: 10 10 10 ● Do not mix different battery types (such as alkaline and manganese batteries). ● Do not use rechargeable batteries (Ni-Cd, etc.). ● Do not burn or break up batteries. ● Do not expose batteries to excessive heat such as sunshine, fire or the like. ● Make sure you dispose of batteries correctly.
■ Viewing 3D Images Caution ● Pay special attention when children are viewing 3D images. 3D images should not be viewed by children younger than about 6 years old, as a guideline. All children must be fully supervised by parents or guardians who must ensure their safety and health while they are viewing 3D images. ● Stop viewing 3D images immediately if you feel tired, feel unwell, experience any other uncomfortable sensation or clearly see double images. Take an appropriate break before continuing to view.
Assembling / Removing the pedestal Assembly screw (4) 50-inch model (8) 55-inch model 65-inch model Bracket 65-inch model 55-inch model 65-inch model 50-inch model 55-inch model 65-inch model M5 × 16 Assembly screw (5) 50-inch model (1) 55-inch model Cover 50-inch model Base 50-inch model Cable clamp (4) (p.
■ Adjusting the panel to your desired angle 50-inch model ● Do not place any objects within the full rotation range. 15° 15° (View from the top) Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws 50-inch model / 2 Pull out the pedestal from the TV. 3 Remove the assembly screw from the cover. 4 Pull out the cover. 5 Remove the assembly screws from the bracket.
Basic connections Mains lead, satellite dish and aerial ● To ensure your satellite dish or aerial is correctly installed, please consult your local dealer. Also please consult the received broadcasting companies for details. ■ freesat, Other Sat. / Satellite Satellite dish Satellite cable Mains lead (supplied) ■ DVB, Analogue AC 220-240 V 50 / 60 Hz ■ Mains lead Terrestrial aerial RF cable To remove from the TV: tabs Push until both side tabs click Make sure that the mains lead is securely fixed.
■ DVD Recorder / VCR and Cable TV Cable Cable TV box HDMI cable Terrestrial aerial SCART cable SCART cable RF Cable AV1 (SCART) adaptor (supplied) RF Cable DVD Recorder / VCR RF cable Network ● To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection.
Other connections ■ DVD player (COMPONENT equipment) TV (Listening) DVD Player (Viewing) AV2 (COMPONENT / VIDEO) adaptor (supplied) ■ Camcorder / Game equipment (VIDEO equipment) TV (Listening) Camcorder (Viewing) Game equipment AV2 (COMPONENT / VIDEO) adaptor (supplied) ■ Amplifier (to listen with speakers) TV HDMI cable Amplifier with speaker system External equipment (DVD Player, etc.) ● Use HDMI2 for connecting an amplifier.
■ Headphones TV Less than 10 cm ● To adjust volume [Headphone Volume] in the Sound Menu (M3 stereo mini plug) Ferrite core - Small size (supplied) Installing the Ferrite core Pull back the tabs (in two places) Wind the cable twice Close ■ Common Interface TV CI module ● If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. ● Insert the module in the correct direction.
Using the cable tie and cable clamp (supplied) ● Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image). ● Fix cables with the cable tie and cable clamp as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables.
Identifying Controls Remote Control 6 OK 1 2 3 14 15 4 5 16 17 18 6 19 7 20 8 9 10 21 22 11 23 7 8 9 10 11 12 13 14 15 12 13 24 16 17 25 18 19 20 21 22 1 Standby On / Off switch 2 3D button ● Switches the view between 2D and 3D. 3 [Main Menu] ● Press to access Picture, Sound, Network, Timer, Setup and Help Menus. 4 Information ● Displays channel and programme information. 5 APPS ● Displays [APPS List] (applications list). 23 24 25 ● Confirms selections and choices.
VIERA Touch Pad Controller This touch pad controller is designed for the convenient operations, especially, on Home Screen or internet contents. You can operate the TV intuitively with this controller. ● The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to register will appear in “First time Auto Setup” for first using the TV. (p.
Electronic Touch Pen You can paint or play games on the TV screen with the Electronic Touch Pen. ● The Electronic Touch Pen can be used by pairing to the TV in “First time Auto Setup” (p. 18) or [Touch Pen Setup]. For more information, refer to [eHELP] (Functions > Electronic Touch Pen > Touch Pen Setup). 2 1 3 4 1 Power button To turn on: Press once To turn off: Press and hold 2 seconds or longer ● Automatically turned off if unused for 5 minutes. 2 Indicator lamp ● Lights for approx.
Indicator / Control panel ● When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button. 1 23 mm 2 3 8 4 5 6 9 7 Rear side of the TV 1 Input mode selection 2 3 4 5 6 7 Power LED ● Press repeatedly until you reach the desired mode. [Main Menu] ● Press and hold for about 3 seconds to display main menu.
First time Auto Setup Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 8 - 13) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Operations Turn power on ● Mains power On / Off switch should be on. (p. 17) (Remote Control) or (TV) The last viewed [Home Screen] is displayed. Example: [TV Home Screen] Example: Selected content screen ● To return to [Home Screen] at any time ● You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (Watching > my Home Screen).
How to Use eHELP [eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the operations for each feature. 1 Display [eHELP] or [Help] [eHELP] ● [Read first] will be displayed on the top page. Please read these instructions fully to get more understanding of the operation in [eHELP]. ● If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed to select whether [First Page] or [Last Page].
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D “Accessories” (p. 6) Eyewear. ● The 3D Eyewear must be worn to view 3D images. ● This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats. *: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back.
1 Turn the 3D Eyewear on and put it on 2 View the 3D images Connection status and battery status are displayed on the bottom right of the screen. Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view 3D images. Note ● Turn off the 3D Eyewear after using it. ● Use the 3D Eyewear within approximately 3.2 m from the TV.
Unusual image is displayed ● Turn the TV off with Mains power On / Off switch, then turn it on again. ● If the problem persists, initialise all settings. [Shipping Condition] in [System Menu] (Setup Menu) Unusual sound from the TV ● When the power is on, whirring sound of cooling fan or drive noise may be heard from inside the TV (not a sign of faulty operation).
Specifications ■ TV Model No. 50-inch model 55-inch model TX-P50VT65B TX-P55VT65B Dimensions (W × H*1 × D) 1,203 mm × 790 mm × 301 mm (With Pedestal) 1,203 mm × 702 mm × 50 mm (TV only) 1,318 mm × 855 mm × 296 mm (With Pedestal) 1,318 mm × 767 mm × 51 mm (TV only) Mass 31.5 26.0 38.5 31.5 Net (With Pedestal) Net (TV only) Net (With Pedestal) Net (TV only) 65-inch model Model No. Dimensions (W × H*1 × D) 1,531 mm × 975 mm × 323 mm (With Pedestal) 1,531 mm × 887 mm × 51 mm (TV only) Mass 50.
Operating conditions AV1 input / output AV2 input (COMPONENT / VIDEO) Temperature: 0 °C - 35 °C Humidity: 20 % - 80 % RH (non-condensing) SCART (Audio/Video in, Audio/Video out, RGB in) Connection terminals VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] Y PB, PR 1.0 V[p-p] (including synchronisation) ±0.35 V[p-p] HDMI 1 / 2 / 3 input TYPE A Connectors HDMI1 / 3: 3D, Content Type, Deep Colour, x.v.
■ Electronic Touch Pen Dimensions Length: 186.7 mm Diameter: 18.2 mm Mass Approx. 30 (excluding battery) Usage temperature range 0 °C - 40 °C Battery Panasonic R03 battery Operation time : approx. 8 hours Panasonic LR03 battery Operation time: approx. 30 hours Materials Main body: Resin Note ● 3D Eyewear, Electronic Touch Pen and VIERA Touch Pad Controller use Bluetooth wireless technology. ● Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
Plasma Television Declaration of Conformity (DoC) “Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.” If you want to get a copy of the original DoC of this TV, please visit the following website: http://www.doc.panasonic.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
