Operating Instructions Plasma Television Model No.
Turn your own living room into a movie theatre! Experience an amazing level of multi- Notice for DVB functions ●Any functions related to DVB (Digital Video Broadcasting) will work in areas where DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital terrestrial broadcasting are received, where DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services are supplied or where DVB-S (MPEG2 and MPEG4-AVC(H.264)) digital satellite broadcasting are received.
media excitement Enjoy rich multi-media SD Card Camcorder Personal computer Amplifier with Speaker system DVD Recorder VCR Set top box DVD player Up to 100,000 hours Plasma Panel Lifetime The Plasma display panel used in the 2009 VIERA TV range is rated for up to 100,000 hours.∗ ∗This measurement is based on the time taken for the brightness of the panel to reduce to half of it’s maximum level.
Safety Precautions Warning Handling the mains plug and lead ●Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) ●Ensure that the mains plug is easily accessible. ●Ensure the earth pin on the mains plug is securely connected to prevent electrical shock. ●An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. ●Do not touch the mains plug with a wet hand.
Notes ■Do not display a still picture for a long time Radio waves ●Do not place the unit in any medical institutions or locations with medical equipment. Radio waves from the unit may interfere with the medical equipment and cause accidents due to the malfunction. ●Do not use the unit near any automatic control equipment such as automatic doors or fire alarms. Radio waves from the unit may interfere with the automatic control equipment and cause accidents due to the malfunction.
Maintenance First, remove the mains plug from the socket outlet. Display panel Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry. Caution ●The surface of the display panel has been specially treated and may be easily damaged.
Accessories ■Standard accessories Check that you have the accessories and items shown □ Display Unit □ Remote Control □ Batteries for the ●N2QBYB000002 Remote Control (2) ●R6 (UM3) abc def ghi jkl mno pqrs tuv wxyz □ Cleaning cloth □ Clamper (2) □ Tuner Box □ Ferrite core (2) p. 12 and p. 13 □ Speaker (2) p. 15 □ HDMI cable p. 10 □ Pedestal ●Accessories ●Maintenance ●Options p. 12 □ Wireless Unit p. 8 p. 13 (2) □ Pedestal installation kit p.
Accessories Installing / removing remote’s batteries Pull open 1 2 Close Note the correct polarity (+ or -) Hook Caution ●Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. ●Do not mix old and new batteries. ●Do not mix different battery types (such as alkaline and manganese batteries). ●Do not use rechargeable (Ni-Cd) batteries. ●Do not burn or breakup batteries.
■Assembling the pedestal Remove the Cable cover from the Frame ●Cable cover will be used again after the pedestal is attached to the Display Unit. . B Cable cover Use the assembly screws to fasten securely. ●Make sure that the screws are securely tightened. ●Be careful not to scratch the surface (part with gloss finish) of the base during assembly.
Accessories Attaching the Speakers Speaker ●SP-46Z1E (TX-P46Z1E) ●SP-54Z1E (TX-P54Z1E) Speaker (2) Speaker installation kit ●TXFKR01JXUE Mounting bracket-[Top] (2) ●TXFKR04DLUJ Assembly screw Mounting bracket-[Lower left] ●TXFKR06DLUJ Speaker cable (2) ●TXFXY01DLUJB (8) Mounting bracket-[Lower right] ●TXFKR05DLUJ ●TXJ/SPDKUU-1 (8) Use the assembly screws - to fasten the Mounting brackets to the rear of the Display Unit securely. ●Make sure that the screws are securely tightened.
Use another two assembly screws Speaker to the Mounting brackets to fasten the . B E-b A C Adjust the speaker position and make sure that the assembly screws - are securely tightened. E b ●Accessories Connect the Speaker and the Display Unit with the Speaker Cable . ●Insert the terminal firmly. ●Connect the terminal near the Ferrite core to the Display Unit. ●Fix the cable with the clamper on the Mounting bracket .
Basic Connection Connecting the Display Unit and the Tuner Box Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. ■Conditions ●If you are going to place the Tuner Box close to or under the Display Unit, it is recommended to connect them using the supplied HDMI cable. If your installation layout is not suitable for using the Wireless Unit (Example 2), connect them using the supplied HDMI cable.
Tuner Box Wireless Unit ●TU-Z100ER ●TU-WH1E Tuner Box Wireless Unit (Receiver and Transmitter) ●TZTWH01JSUE Wireless Receiver Assembly screw (2) ●TXFXY01JSUJB Wireless Transmitter M4 × 10 Exclusive cable for Wireless Unit For Wireless Receiver For Wireless Transmitter ●TXFMM02JSUE Cable clamper (2) ●TMME364 ●TXFMM03JSUE 0.5 m 1.0 m Attach the Wireless Receiver - to the Display Unit with assembly screws .
Basic Connection Connecting the Tuner Box and dish / aerial / external equipment External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. ●Read the manual of the equipment too.
■Example 3 Connecting DVD Recorder / VCR and Set top box Rear of the Tuner Box Terrestrial aerial AC 220-240 V 50 / 60 Hz AV 1 AUDIO OUT RGB VIDEO AV 2 AUDIO IN Y L L PB R R PR RGB VIDEO S VIDEO Mains lead COMPONENT DIGITAL AUDIO OUT HDMI 1 HDMI 2 HDMI 3 Fully wired HDMI compliant cable Fully wired SCART cable Cable DVD Recorder or VCR Set top box RF cable RF IN RF cable ●Connect to the TV’s AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link.
Identifying Controls Display Unit Selects channel in sequence Volume Up / Down Power LED ●Standby: red On: green ●When using the remote control, indicates Mains power On / Off switch ●Turn the Display Unit On or Off. the TV has received a command. When turning Off the Display Unit, Tuner Box will also be turned to Standby mode after 1 min. C.A.T.S. (Contrast Automatic Tracking System) sensor ●Senses brightness to adjust picture quality when “Eco Mode” in the Picture Menu is set to “On” (p.
Remote Control This remote control is RF (Radio Frequency) remote control. Signals are sent in virtually every direction, so that you can operate the TV even if the remote control is not facing the Display Unit or the Tuner Box. In addition, as the radio waves reflect on walls or other obstacles, the remote control is operable even there are obstacles between the remote control and the Tuner Box. ●This remote control uses 2.4 GHz frequency band.
Auto Setup Search and store TV channels automatically. ●These steps are not necessary if the setup has been completed by your local dealer. ●Please complete preparations and setup of all units before starting Auto Setup. (p. 8 - 13) ●Please complete connections (p. 14 and p. 15) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions.
■Overview ●How to operate p. 20 Main Menu Picture Sound Setup Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management x.v.Colour 1/2 Dynamic 60 0 30 5 0 Warm Off Auto Picture Menu Eco Mode P-NR 3D-COMB Multi Window Advanced Settings Reset to Defaults 2/2 Off Off Off Access Access Reset Advanced Settings W/B High R W/B High B W/B Low R W/B Low B Gamma Reset to Defaults 2.2 Reset (p. 22) (p.
How to Use Menu Functions ■Menu list Menu Item Picture Viewing Mode Basic picture mode (Dynamic / Normal / Cinema / THX / Game) ●Set for each input signal Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room Normal : Recommended for viewing under normal ambient room lighting conditions Cinema : For watching movies in a darkened room producing a cinema-like picture THX : Recommended for playback of THX disc (disc with “THX” logo) THX mode is used to mirror the picture
Menu Item Adjustments / Configurations (alternatives) Basic sound mode (Music / Speech) Bass Increases or decreases level to enhance or minimise lower, deeper sound output Treble Increases or decreases level to enhance or minimise sharper, higher sound output Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings (Off / V-Audio / V-Audio Surround / V-Audio ProSurround) V-Audio: Provides a dynamic enhancer of
How to Use Menu Functions ■Menu list Menu Item Off Timer Adjustments / Configurations (alternatives) Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Link Settings Setup VIERA Link Sets to use VIERA Link functions (Off / On) Q-Link Selects which AV terminal is to be used for data communication between this TV and a compatible recorder (AV1 / AV2) ●Select the connected terminal to the recorder even it is not compatible with Q-Link.
Menu Item Adjustments / Configurations (alternatives) DVB-C Tuning Menu Creates list of favourite DVB-C channels Channel List Skips the unwanted DVB-C channels or edits DVB-C channels Auto Setup Automatically sets the DVB-C channels supplied Manual Tuning Sets the DVB-C channels manually Update Channel List Updates DVB-C Channel List with keeping your settings New Channel Message Selects whether to give a notification message when a new DVB-C channel is found Signal Condition Checks the DVB-
How to Use Menu Functions ■Menu list Menu Item OSD Language Adjustments / Configurations (alternatives) Changes language for on-screen displays Language Selects the first and second preferred language for DVB multi audio (depending on Preferred Audio 1 / 2 the broadcaster) Setup Display Settings Preferred Subtitles 1/2 Selects the first and second preferred language for DVB subtitles (depending on the broadcaster) Preferred Teletext Selects the preferred language for DVB teletext service (dependin
Menu Item Adjustments / Configurations (alternatives) Resets all settings, for example, when moving house System Update Downloads new software to TV Licence Menu System Menu Shipping Condition Software Licence Displays the software licence information Java Logo Displays the Java logo System Information Displays the system information of this TV AV Colour System Selects optional colour system based on video signals in AV mode (Auto / PAL / SECAM / M.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
