Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsTXP50UT30B

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that

used electrical and electronic products and batteries should not be mixed with general

household waste. For proper treatment, recovery and recycling of old products and

used batteries, please take them to applicable collection points, in accordance with your

national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where you

purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples) :

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

Sales and Support Information

Customer Care Centre

• For customers within the UK: 0844 844 3852

• For customers within Ireland: 01 289 8333

• Visit our website for product information: www.panasonic.co.uk

• E-mail: customer.care@panasonic.co.uk

Direct Sales at Panasonic UK

• For customers: 0844 844 3856

• Order accessory and consumable items for your product with ease and confidence by phoning our Customer

Care Centre Monday − Thursday 9:00am − 5:30pm, Friday 9:30am − 5:30pm (Excluding public holidays).

• Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for a wide range of finished products, take

a browse on our website for further details.

Declaration of Conformity (DoC)

Authorized Representative :

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this

serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent

record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Web Site : http://panasonic.net

Willoughby Road, Bracknell, Berkshire, RG12 8FP

M0511-0

Printed in Czech Republic

Summary of content (104 pages)

PAGE 1
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
PAGE 2
Model No. TX-P42UT30B TX-P50UT30B Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
PAGE 3
Features 3D technology Viewing 3D images on the Full HD panel You can enjoy viewing 3D images on this TV by wearing the 3D Eyewear. RealD 3D This TV and 3D Eyewear use the 3D technology of RealD. RealD is one of the inventors in 3D technology. DVB-T tuner built-in Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts. DVB-T2 tuner built-in DVB-T2 is an advanced digital terrestrial system for more efficient transmission.
PAGE 4
Do not display a still picture for a long time This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. Typical still images • Channel number and other logos • Image displayed in 4:3 mode • Video game • Computer image To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p.
PAGE 5
Safety Precautions Warning Safety Precautions ■ Mains plug and lead To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: • This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. • Insert the mains plug fully into the socket outlet. • Ensure that the mains plug is easily accessible. • Remove the mains plug when cleaning the TV. If you detect anything unusual, • Do not touch the mains plug with a wet immediately switch off the mains supply hand.
PAGE 6
Warning ■ Take care To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: • Do not remove covers and never modify the TV yourself as live parts are Safety Precautions accessible when they are removed. There are no user serviceable parts inside. • Do not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.
PAGE 7
Accessories / Options Standard accessories Remote Control • N2QAYB000572 Batteries for the Remote Control (2) (p. 7) • R6 Quick Start Guide Operating Instructions Mains Lead Pedestal (p. 11) (p. 7) • K2CT3YY00021 TX-P42UT30B : TX-P50UT30B : • TBL5ZX0203 • TBL5ZX0204 • TXFBL5Z0007 • TXFBL5Z0009 • TXFBL5Z0040 • TXFBL5Z0041 Product Registration Leaflet Accessories / Options Ferrite core (2) (p. 12, 86) • J0KG00000146 Use the Ferrite cores to comply with the EMC standard.
PAGE 8
Wall-hanging bracket • TY-WK4P1RW • Tilting angle for this TV : 0 (vertical) to 20 degrees Rear of the TV Depth of screw : minimum 15 mm, maximum 30 mm Diameter : M8 Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV) 400 mm 300 mm Warning • Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk Installing / removing remote’s batteries 1 Accessories / Options of personal injury and product damage.
PAGE 9
A Assembly screw (4) C (silver) • XYN5+F20FN Assembly screw (black) • XSB4+8FNK Base • TBL5ZX0203 (TX-P42UT30B) • TBL5ZX0204 (TX-P50UT30B) F Cover • TBL5ZB3094-1 (TX-P42UT30B) • TBL5ZB3095-1 (TX-P50UT30B) M4 × 8 M5 × 20 B Assembly screw (4) Quick Start Guide E D Pole • TBL5ZA3055 (TX-P42UT30B) • TBL5ZA3065 (black) • THEL087N (TX-P42UT30B) • THEL088N (TX-P50UT30B) (TX-P50UT30B) M5 × 25 Accessories / Options 1 Assembling the pedestal Use the assembly screws A to fasten the pole D to the base
PAGE 10
Identifying Controls Remote Control 9 DIRECT TV REC EXIT VIERA Lin k TO VIERA OLS BACK/ RETURN OPTION 15 16 17 18 19 20 21 12 TEXT STTL INDEX HOLD abc def ghi jkl mno pqrs tuv wxyz 23 24 25 13 LAST VIEW 26 14 REC PROGRAMME 27 DVD/VCR TV TV 1 Standby On / Off switch • Switches TV On or Off standby 2 3D button (p. 32) • Switches to the viewing mode between 2D and 3D 3 [Main Menu] (p. 35) • Press to access Picture, Sound, Timer and Setup Menus 4 Aspect (p.
PAGE 11
TV 2 3 1 4 5 6 Quick Start Guide 7 8 11 9 12 13 14 10 Identifying Controls 1 CI slot (p. 57) 2 Function select / • [Volume] / [Contrast] / [Brightness] / [Colour] [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Auto Setup] (p. 46) ∗[Music] or [Speech] mode in the Sound Menu 3 Channel Up / Down, Value change (when using the F button), Switching the TV On (press either button for about 1 second when in Standby mode) 4 Changes the input mode 5 USB 1 / 2 port (p.
PAGE 12
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. There are some restrictions on placement for viewing 3D images. For details (p.
PAGE 13
Example 3 Connecting DVD Recorder / VCR and Satellite receiver TV, DVD Recorder / VCR and Satellite RF cable Rear of the TV Terrestrial aerial Quick Start Guide Fully wired HDMI compliant cable AC 220-240 V 50 / 60 Hz Fully wired SCART cable Aerial input terminal Fully wired SCART cable Fully wired HDMI compliant cable Basic Connection Mains lead (supplied) HDMI Recorder/ AV AV 2 AV 1 HDMI DVD Recorder or VCR RF OUT Satellite receiver RF OUT RF cable RF IN RF IN RF cable ■ Connecting to t
PAGE 14
Auto Setup Search and store TV channels automatically. • These steps are not necessary if the setup has been completed by your local dealer. • Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual. 1 Plug the TV into mains socket and switch On on the remote control for at least 1 second to turn the TV On.
PAGE 15
3 Setup the network connection Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 70). • To setup the wireless connection, the Wireless LAN Adaptor (optional accessory) is required. Please note that this TV does not support wireless public access points. • Ensure the network connections (p. 12) and network environment are completed before starting setup. Select the network type Network Setup [Wired] “Wired connection” (p.
PAGE 16
3 4. Select [Yes] Access Point Settings Encryption key is set to:XXXXXXXX Select 'Yes' to confirm. Select 'No' to change. Yes No select set • To re-enter the encryption key, select [No]. • If the connection has failed, check the encryption key, settings and positions of your access point. And then, follow the on screen instructions. Connection Test Check access point connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection.
PAGE 17
4 ■ How to input Owner ID 1 Enter the PIN number (4 digits) Owner ID Please enter new PIN PIN * * * * abc def ghi jkl mno pqrs tuv wxyz • Enter the PIN number twice at first setting.
PAGE 18
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. • This TV does not support full web browser function and some features of the websites may not be available.
PAGE 19
Watching TV 1 Turn power on • Press for about 1 second • Mains power On / Off switch should be On. (p. 10) ■ VIERA Connect introduction banner appears You can access to VIERA Connect and enjoy the various contents. (p. 17) • To remove this banner, leave for about 5 seconds or press any buttons (except the buttons to access VIERA Connect). • To set this banner display off [VIERA Connect Banner] (p.
PAGE 20
Other useful functions Display Information banner Display Information banner • Also appears when changing a channel 1 Example : DVB HDTV 1 ZDF Mute Bad signal 2 3 5 6 Coronation Street 20:00 - 20:55 Now Info AD 7 4 20:35 All DVB Channels Select favourites STTL TEXT Multi Audio 45 5 Programme Start / Finish time (DVB) Channel number, etc. (Analogue) 6 Progress time indicator of the selected programme (DVB) 1 Channel position and name 2 Channel type ([Radio], [Data], [HDTV], etc.
PAGE 21
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly OPTION • To change select select / change access store Watching TV [Audio Description] (DVB mode) Set to [Auto] if the programme has Audio Description service, then you will hear an additional audio track to describe events on screen • To adjust the volume for Audio Description [Audio Description Menu] (p.
PAGE 22
Aspect Change the aspect ratio (image size) ASPECT Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 88). ■ If you would like to change the aspect ratio manually 1 Display Aspect Selection list 2 While the list is displayed, select the mode ASPECT • You can also change the mode select only using the ASPECT button.
PAGE 23
Using TV Guide TV Guide−Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). • This TV supports the GUIDE Plus+ system. • The Rovi branding partner will supply the rating information in the programme information and the recommended group in the Search list. • DVB and Analogue channels are displayed on the same TV Guide screen.
PAGE 24
■ To search programme types and view a channel list of the searched programmes (DVB mode) (yellow) (Search list) Prog.Type All Types Search Titles... All Types Movie Movie News News and Factual select type (Type list) Search view ■ To search programme titles and view a list of the searched programmes (DVB mode) (yellow) (Search list) 1 Select 2 Set characters 3 Start Search [Search Titles...] (maximum : 19 characters) [Search] (green) select select Search Titles...
PAGE 25
Note • This function is not available in Analogue mode. • Timer Programming reminder messages will remain displayed until one of the following occurs : • You press the OK button to view the programme or the EXIT button to cancel the reminder. • The timer programming event that the reminder is set for ends. • No other channel can be selected while the recording of Timer Programming is in progress. • When recording programmes, be sure to make the proper settings on the recorder connected to the TV.
PAGE 26
Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) • The availability of teletext services for a programme is indicated by [TEXT] in the information banner. Information banner 1 BBC ONE WALES 20:35 All DVB Channels Select favourites Coronation Street 20:00 - 20:55 Now (p. 19) Displayed if programme has teletext service TEXT Depending on the broadcaster, the digital teletext (MHEG) services may not be available.
PAGE 27
Analogue teletext Analogue teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
PAGE 28
FULL / TOP / BOTTOM MENU (green) (TOP) (BOTTOM) Normal (FULL) (Expand the TOP half) (Expand the BOTTOM half) View in multi window Watch TV and Teletext in two windows at once TEXT • Operations can be made only in Teletext screen. TV and Teletext • Each time pressed : Teletext TV press and hold (Corresponding coloured button) • If you wish to use Subtitles, do not change number on blue button. The number changes to white.
PAGE 29
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input. • To connect the equipment (p. 11, 12, 85 - 87) The remote control is capable of operating some functions of selected external equipment. “Operating the equipment with the TV remote control” (p. 29) 1 Turn the TV on When connecting with SCART as example 2 or 3 (p.
PAGE 30
Operating the equipment with the TV remote control Watching External Inputs The equipment connected to the TV can be directly operated with the below buttons of this TV remote control. Selection Switch for operating the connected equipment Select “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player, Player theatre, Blu-ray Disc theatre or VCR DVD/VCR TV “How to change the code for the type of the equipment” (see below) Select “TV” to use in Media Player or VIERA Link “Media Player” (p.
PAGE 31
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. “Optional accessories” (p. 6) This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats.
PAGE 32
■ 3D photos and 3D videos taken by 3D-compatible Panasonic products • Available in Media Player (p. 61 - 63, 66) ■ 2D images converted to 3D Set to [2D 3D] mode in [3D Mode Selection] (p. 32) 1 Turn the 3D Eyewear on 2 Put on the 3D Eyewear the 3D images 3 Watch • Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view 3D images.
PAGE 33
Changing 2D - 3D mode You can easily change the viewing mode between 2D and 3D using the 3D button. Select the mode 3D Mode Selection select • Items of [3D Mode Selection] 2D 3D vary depending on the condition. 3D set 2D [3D] / [2D] / [2D 3D] : Displays the appropriate image that you desire without selecting 3D format • This mode may not work properly depending on the source image format. In this case, select the appropriate 3D format manually.
PAGE 34
3D Settings If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings.
PAGE 35
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. • For [VIERA Link Control] function to operate correctly, ensure the connections and settings are completed. “Summary of Q-Link and VIERA Link features” (p. 77, 78), “Preparations” (p. 80) After connection, turn the equipment on and then switch the TV on.
PAGE 36
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu 1 • Displays the functions that can be set (varies according to the MENU input signal) Select the menu 2 Example : [Picture Menu] select Main Menu access Picture Sound Timer Setup Example : [Picture Menu] select 1/2 Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour C.A.T.S.
PAGE 37
Menu list Menu Item Adjustments / Configurations (alternatives) Picture How to Use Menu Functions Viewing Mode Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] / [Photo] In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [C.A.T.S.], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. • Set for each input signal.
PAGE 38
Menu Item Intelligent Frame Creation 24p Smooth Film Clear Cinema 3D Refresh Rate Side Panel 16:9 Overscan DVI Input Setting Pixel Orbiter Scrolling Bar Reset to Defaults Sound Mode Bass Treble How to Use Menu Functions Picture Advanced Settings Resolution Enhancer Adjustments / Configurations (alternatives) Automatically compensates the picture frame rate and removes juddering movements to make the images smooth [Off] / [Mid] / [Max] • Depending on the contents, images may be noisy.
PAGE 39
Menu Item Sound How to Use Menu Functions Audio Description Menu Audio Description Narration settings for visually impaired users [Off] / [Auto] Set to [Auto] to activate the narration sound track when available on the broadcast • The availability of audio description sound track is indicated by [AD] in the information banner (p. 19).
PAGE 40
Menu Item Adjustments / Configurations (alternatives) Off Timer Sets the time until the TV automatically goes to Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20) Auto Standby Sets the duration of time that the TV will remain On when no operation is received from the user [Off] / [2] / [4] (hours) • Starting Timer Programming automatically does not affect this function.
PAGE 41
Menu Item DVB Tuning Menu Favourites Edit Creates a list of favourite DVB channels (p. 48) Channel List Skips the unwanted DVB channels or edits DVB channels (p. 49) Auto Setup Automatically searches for the DVB channels received in the area (p. 46) Analogue Tuning Menu Setup How to Use Menu Functions Channel Sorting by Region Automatically sorts tuned channels according to the available region (p. 47) Manual Tuning Searches for the DVB channels manually (p.
PAGE 42
Menu Item VIERA Connect Banner Display Settings Playing Time Display Radio Mode Adjustments / Configurations (alternatives) Sets the VIERA Connect introduction banner display [Off] / [On] (p. 17, 18) Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On] • This function is available when [Game] is selected in [Viewing Mode] (p.
PAGE 43
Overview (Picture, Sound, Timer, Setup) How to operate (p. 35) 1/2 Main Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour Reversal Film Effect Picture Sound Timer Dynamic Warm Off Off Setup 2/2 C.A.T.S. P-NR 3D-COMB 3D Settings Screen Display Advanced Settings Reset to Defaults 1/2 Advanced Settings (p.
PAGE 44
TV Guide Settings Menu Main Menu Normal TV Guide View GUIDE Plus+ Postcode Access GUIDE Plus+ Information Access Picture (p. 39) Sound Enter Postcode Postcode Timer A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 0 5 6 7 TV Guide Settings Eco Navigation Link Settings Child Lock DVB Tuning Menu Analogue Tuning Menu Display Settings Network Setup DivX® VOD 8 9 1 1/2 Setup .
PAGE 45
Overview (Setup) How to operate (p.
PAGE 46
DVB Favourites Editor All DVB Channels 70 72 105 719 720 1 7 DVB Manual Tuning [CH21] Frequency Signal Quality Signal Strength No. 474,00 MHz 0 0 Channel Name 10 10 New Type 1 7 14 70 72 105 719 720 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru BBC ONE Wales BBC THREE All DVB Channels BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Favourites1 (p. 48) (p. 49) Free TV: 0 Pay TV: 0 Radio: 0 Stopped Data: 0 (p.
PAGE 47
Retuning from Setup Menu Automatically retune the channels received in the area. • This function is available if channel tuning is already performed. • Only the selected mode is retuned. All the previous tuning settings are erased. • If Child Lock PIN number (p. 53) has been set, the PIN number is required. • If tuning has not been done completely [Manual Tuning] (p. 47) DVB or Analogue channels 1 Select DVB or Analogue (p.
PAGE 48
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. 1 Select DVB (p.
PAGE 49
List favourite DVB channels [Favourites Edit] Create your favourite channel lists from various broadcasters (up to 4 : [Favourites]1 to 4). The DVB Favourites lists are available for switching in the Information banner (p. 19) and from [Category] in the TV Guide screen (p. 22).
PAGE 50
Skip unwanted DVB channels, Edit DVB Channels [Channel List] You can hide unwanted DVB channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
PAGE 51
Skip unwanted Analogue channels, Edit Analogue channels [Channel List] You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and [reveal] / [hide] 1 2 3 4 5 6 7 • To reveal all channels select Analogue Channel List BBC1 ***** ***** ***** ***** ***** ***** (yellow) [Reveal] / [Hide] : [Reveal] : [Hide] (skip) ■ To edit channels You can also edit each channel in Channel List.
PAGE 52
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel automatically to record even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 23). • Timer Programming can store up to 15 events. • For recording using Timer Programming, the TV must be either On or in standby.
PAGE 53
Set timer programming event details [Timer Programming] 1 Start making the settings 2 Select the function select ([Ext Rec.] or [Reminder]) [Reminder] : [Ext Rec.] : to remind you to watch the programme to record the programme to the external recorder When you are watching TV, a reminder message When the start time comes, the channel will be switched automatically and the video and audio signals will be output. appears 2 minutes before the start time.
PAGE 54
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it.
PAGE 55
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. • To select the input mode (p.
PAGE 56
Shipping Condition Resets the TV to its original condition with no channels tuned in. All settings other than [Owner ID] are reset (channels, picture, sound settings, etc.). • To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p.
PAGE 57
Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft, the Owner ID will help the Police to determine the owner.
PAGE 58
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. TV works only for Pay TV modules complying with CI standard. • This function is not available for BskyB’s Sky channels. • Video and audio signals may not be output depending on broadcasts or services. CI slot Caution • Turn Off Mains power On / Off switch whenever inserting or removing the CI module.
PAGE 59
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. • To download • If you choose not to download EXIT You can update any new software automatically or manually.
PAGE 60
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. Photo mode : Still pictures recorded by digital cameras will be displayed. Video mode : Moving pictures recorded by digital video cameras will be played back. Music mode : Digital music data will be played back.
PAGE 61
Starting Media Player 1 Insert the SD Card or USB Flash Memory to the TV 2 Start Media Player (p. 59) Media Player Signal output from all AV terminals will be disabled during Media Player view. • Also possible by pressing following Press OK to proceed. button. Press EXIT to return to TV viewing. “Watching External Inputs” (p. 28) AV 3 Select the device you want to access to Media Player select access • If two or more devices are not connected, this step will be skipped.
PAGE 62
Photo mode Photo mode will read all “.jpg” extension files and supports “.mpo” extension files in the SD Card or USB Flash Memory. The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed.
PAGE 63
[Single view] - Photos are displayed one at a time.
PAGE 64
4 Create the 3D photo • If your selected photos are not suitable for the 3D photo, the error message will be displayed and will return to the photo selection screen (step 3). • To save the 3D photo in the SD Card The 3D image will be saved onto your media. Continue? select [Yes] save No Yes After finishing saving the photo, the photo selection screen will be displayed (step 3). Select photos again to create another 3D photo or exit from [Multi Shot 3D] mode.
PAGE 65
Menu Slideshow Settings Using Media Player 64 Item Adjustments / Configurations (alternatives) Frame Selects the frame type of the slideshow [Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] / [Gallery] / [Cinema] [Multi] : 9 photos are displayed orderly at once. [Collage] : Each photo is displayed at a random position and random scale. [Drift (+ calendar)] / [Drift] : Photos are displayed like flow images. • You can select to display the calendar or not.
PAGE 66
Menu Item Adjustments / Configurations (alternatives) Slideshow Settings Selects the back ground music during Photo mode [Off] / [Type1] / [Type2] / [Type3] / [User] / [Auto] • [Type1], [Type2] and [Type3] are the fixed music each installed in this TV. [User] : Music data in the device registered by yourself will be played back. To register the music 1. Select the music file 2.
PAGE 67
Video mode • Supported file format (p. 89) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example : Thumbnail - [Title view] Title view The preview will start when the title is Media Player Video highlighted if it supports a preview. • To turn off the preview “Video Setup” (p.
PAGE 68
■ How to operate in the playback Example : Playback SD 19/02/2010 11:21 00:15:39 00:02:05 • To display / hide the operation guide and information banner scene Rewind RETURN Pause / Playback Fast forward Stop Information banner ASPECT • To the previous title / • To operate the playback EXIT Operation guide • To change aspect (red) • To the next title / scene (green) • To return to thumbnail BACK/ RETURN ■ To change the device “Change the device” (p.
PAGE 69
Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal. • To confirm or change the current sound status “Confirm or change the current status” (p.
PAGE 70
■ Playback from File view Selected file will be played back. 1 Select the folder select access 2 Select the file Example : Thumbnail - File view Media Player My Song_2 My Song_3 My Song_8 My Song_9 My Song_10 My Song_11 EXIT RETURN My Song_4 OPTION My Song_5 Info Option Menu Drive Select My Song_6 My Song_7 SD Card Contents Select • To display the information of the highlighted file select Title Album Artist Track No.
PAGE 71
Using Network Services VIERA Connect VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. • This TV has no full browser function and all features of websites may not be available. Network Link Enables to control the TV from the network equipment (Smartphone, etc.
PAGE 72
Network Setup • Ensure the connections are completed before starting Network Setup. “Network connections” (p. 70) 1 2 Display the menu MENU Select [Setup] select Main Menu access Picture Sound Timer Setup 3 Select [Network Setup] select Network Setup access Access ■ To return to TV EXIT Network Link settings Sets the link settings to control this TV from the network equipment via the network.
PAGE 73
Wired connection settings This setting is for the network connection by using the LAN cable.
PAGE 74
4 Select [Connection Test] and access to test select Network Setup Connection Test Network Type Access Point Settings IP/DNS Settings Network Link Settings Software Update MAC Address Access Wired access • Performs automatic testing of the network connection for the TV. (It takes a while to test.) ab-cd-ef-gh-ij-kl Connection Test : succeeded The test is successful and the TV is connected to the network. Check network cable connection. Check acquired IP address.
PAGE 75
■ [WPS(Push button)] press the WPS button on the access point until the light flashes WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on TV. If you are unsure, please check the instruction manual of the access point. Connect connect the Wireless LAN Adaptor and the access point • Ensure that your access point supports WPS for this setup.
PAGE 76
3 Enter the encryption key of the access point (Set characters one by one) Store select Access Point Settings Encryption key A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 ! o p q r 0 a b c d e f g h i j k l m n u v w x y z ( ) + - . * _ 1 : s 2 t 3 .!:# abc def 4 5 6 ghi 7 pqrs jkl 8 tuv BACK/ RETURN set # • You can set characters by using numeric buttons.
PAGE 77
VIERA Connect You can access VIERA Connect and enjoy various network contents. • VIERA Connect requires a broadband internet connection. Dial-up internet connections cannot be used. • Ensure the network connections and network settings are completed. “Network connections” (p. 70), [Network Setup] (p. 71 - 75) • For details about VIERA Connect operation “Using “VIERA Connect”” (p. 17) • Setup menu (Items in [Setup] may change without notice.
PAGE 78
Link Functions (Q-Link / VIERA Link) Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 79) VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control, convenient recording, playback, energy saving, creation of a home theatre, etc., without complicated setting. (p. 80 - 84) You can use Q-Link and VIERA Link functions together. • This TV supports “HDAVI Control 5” function.
PAGE 79
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with Features VIERA Link function VIERA Link function VIERA Link function Analogue channel download – – – ∗5 ∗5 – Easy playback – Power on link Power off link Reduce unnecessary power ∗3 – – consumption in standby Auto standby for unnecessary ∗3 ∗6 ∗3 ∗6 ∗3 equipment Pause Live TV programme – – – Direct TV Recording – – – Control the menu of the ∗1 ∗1 connected equipment by VIERA – remote
PAGE 80
Q-Link Preparations • Connect the DVD Recorder / VCR with the following logos : “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)” or “SMARTLINK (a trademark of Sony Corporation)” • Q-Link connection (p. 77) • Use fully wired SCART cable. • Set up the DVD Recorder / VCR. Read the manual of the recorder. • Q-Link terminal setup in the Setup Menu [AV1 out] (p.
PAGE 81
VIERA Link “ ”∗ ∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 77, 78). These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
PAGE 82
Reduce unnecessary power consumption in standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 39) The power consumption in Standby mode of the connected equipment is controlled in synchronization with the TV On / Off state. When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption in Standby mode of the connected equipment is automatically minimised.
PAGE 83
Pause Live TV programme [Pause Live TV] You can pause the live TV programme and resume the programme later. The Live TV programme will be recorded on HDD of the connected DIGA Recorder. • This function is available with a DIGA Recorder which has HDD. • If you connect a variety of recorders including other manufacturers’ recorders at the same time, please connect the DIGA Recorder which has HDD to the TV’s lower HDMI terminal number.
PAGE 84
3 Select the equipment you want to access The type of the connected equipment is displayed. Select the type of the equipment and access. select VIERA Link Menu Pause Live TV Direct TV Rec VIERA Link Control Speaker Selection Start Start Recorder Home Cinema access / store [Recorder] / [Player] / [Home Cinema] / [Video Camera] / [LUMIX] / [Digital Camera] / [Other] • You can also access directly by using VIERA TOOLS “How to Use VIERA TOOLS” (p.
PAGE 85
Speaker control [Speaker Selection] You can control the home theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). • If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 77, 78), “Preparations” (p.
PAGE 86
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table (p. 87), and the specifications (p. 102, 103).
PAGE 87
Network (wired) Less than 10 cm LAN cable Less than 10 cm Internet Modem Hub or Router Ferrite core (supplied) Installing the Ferrite core Pull back the tabs Wind the cable Press the cable (in two places) twice through and close Side panel of the TV USB devices Wireless LAN Adaptor Rear of the TV Camcorder / Game equipment Side panel of the TV (Viewing) External Equipment Camcorder (Listening) Game equipment To listen with speakers Optical digital audio cable or Amplifier with speaker syst
PAGE 88
Headphones Rear of the TV Side panel of the TV (M3 stereo mini plug) • To adjust volume [Headphone Volume] (p.
PAGE 89
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 21) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode.
PAGE 90
Supported file format in Media Player ■ Photo Format JPEG File extension Image resolution (pixel) .jpg .mpo 8×8 to 30,719 × 17,279 Details / Restrictions DCF∗ and EXIF∗2 standards Sub-sampling : 4:4:4, 4:2:2, 4:2:0 • Progressive JPEG is not supported.
PAGE 91
■ Music Codec MP3 File extension .mp3 AAC .m4a WMA .wma Restrictions – • Copy-protected files cannot be played back. • Copy-protected files cannot be played back. • WMA Pro and WMA Lossless are not supported. Note • Some files may not be played back even if they fulfill these conditions. • Do not use two-byte characters or other special codes for data. • The device may become unusable with this TV if the file or folder names are changed. DivX DivX Certified® to play DivX® and DivX Plus™ HD (H.
PAGE 92
Devices for recording or playing back ■ SD Card (for playing back in Media Player) Card format : SDXC Card - exFAT SDHC Card / SD Card - FAT16 or FAT32 Compliant card type (maximum capacity) : SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring miniSD adaptor) • If miniSD Card is used, insert / remove it together with the adaptor. • Check the latest information on the card type at the following website. http://panasonic.
PAGE 93
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you User input Name reach the desired character. abc A U a u B V b v C W c w D X d x E Y e y F G H I Z 0 1 f g h i z ( ) + J 2 j - K 3 k . L 4 l * M N O P Q R S T 5 6 7 8 9 ! : # m n o p q r s t _ 1 2 .
PAGE 94
USB connection • It is recommended to connect the USB Flash Memory directly to the TV’s USB ports. • Some USB devices or USB HUB may not be used with this TV. • You cannot connect any devices by using USB card reader. • You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory. • Additional information for USB devices may be on the following website. http://panasonic.jp/support/global/cs/tv/ USB Keyboard • The USB Keyboard which requires the driver is not supported.
PAGE 95
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. For details (p. 104) Block noise, frozen or disappearing image occurs in digital mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned • Check the position, direction and connection of the aerial. • Check [Signal Condition] (p. 48).
PAGE 96
Problem Chaotic image, noisy Screen No image can be displayed Blurry or distorted image (no sound or low volume) Unusual image is displayed Sound No sound is produced Sound level is low or sound is distorted Cannot see 3D images 3D 3D Eyewear is turned off automatically Actions • Set [P-NR] in the Picture Menu (to remove noise). (p. 36) • Check nearby electrical products (fluorescent lamp, DECT phones, mobile phones, microwave, etc.).
PAGE 97
Problem Network Cannot connect to the network Cannot operate VIERA Connect The TV does not switch On The TV goes into Standby mode Frequently Asked Questions | On screen messages Other The remote control does not work or is intermittent Parts of the TV become hot Permanently lit spots on screen Overcurrent error message appears An error message appears network administrator prefers to allocate an IP address, set an IP address manually. (p.
PAGE 98
Message Meaning / Action • It is not possible to record from COMPONENT or HDMI. Connect Feature not available. Feature not available. Press OK to view how it works. Found new software version ∗∗∗. Press OK to start update (may take over 40 mins) or press EXIT to ignore and you can update when TV is in standby Invalid operation - Please check settings and connections. Invalid system time. Please exit ! Invalid system time, Timer Programming will not work.
PAGE 99
Message Meaning / Action Reset to Factory Shipping Condition Completed. Please switch off TV. • [Auto Setup] will automatically start when Mains power On / Off Sending Preset Data • Q-Link or VIERA Link channel download is in progress. Software successfully updated. Press EXIT to continue. • The software updating is finished. Software update failed. Please try again later. Press EXIT to continue. • Perform [System Update Search Now] in System Update (p. 58).
PAGE 100
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care : Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt : Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wring the cloth and wipe the surface. Finally, wipe away all the moisture. Caution • Do not use a hard cloth or rub the surface too hard.
PAGE 101
Index Index A Accessories ······················································6 Analogue Tuning Menu ······················46, 49, 50 Aspect ······················································21, 88 Audio Description ·····································20, 38 Auto Gain Control ··········································38 Auto Setup ···············································13, 46 Auto Standby ·················································39 AV1 out············································
PAGE 102
Licence Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. • DVB and the DVB logos are trademarks of the DVB Project. • SDXC Logo is a trademark of SD-3C, LLC. • HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • HDAVI Control™ is a trademark of Panasonic Corporation.
PAGE 103
Specifications TX-P42UT30B Power Source AC 220-240 V, 50 / 60 Hz Rated Power Consumption 270 W Standby Power Consumption 0.40 W 16.00 W (With monitor out recording) Dimensions (W × H × D) Mass 315 W 1,023 mm × 671 mm × 320 mm (With Pedestal) 1,212 mm × 782 mm × 335 mm (With Pedestal) 1,023 mm × 637 mm × 93 mm (TV only) 1,212 mm × 747 mm × 93 mm (TV only) 27.5 k Net (With Pedestal) 35.0 k Net (With Pedestal) 24.0 k Net (TV only) 31.
PAGE 104
Operating Conditions AV1 (SCART) AV2 input Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] Connection Terminals COMPONENT input Y 1.0 V[p-p] (including synchronization) PB, PR ±0.35 V[p-p] HDMI 1 / 2 / 3 input TYPE A Connectors HDMI1 / 3 : 3D, Content Type, Deep Colour, x.v.