Operating Instructions

Using Network Services (DLNA / VIERA Connect)
75
2 Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA- PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
•
If the selected access point is not encrypted, the confirmation screen will be
displayed. It is recommended to select the encrypted access point.
3 Enter the encryption key of the access point (Set characters one by one)
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #
a b c d e f g h i j k l m n o p q r s t
u v w x y z ( ) + - . * _
Access Point Settings
Encryption key
select
set
Store
BACK/
RETURN
•
You can set characters by using numeric
buttons.
4 Select [Yes]
No
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
confirm
select
•
To re-enter the encryption key, select [No].
■ [Manual]
You can setup SSID, authentication type, encryption type, and encryption key manually.
Follow the on screen instructions and set manually.
•
When you use 11n (5 GHz) for the wireless system between the Wireless LAN Adaptor and access point, please select [AES]
for the encryption type.
Please input the SSID.
Access Point Settings
SSID
XXXXXXX
No
SSID Setting
Yes
SSID is set to:-
XXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Authentication Type Settings
Connection will be made with the following
settings:-
SSID : XXXXXXX
Please select the authentication type.
WPA2-PSK
WPA -P SK
Shared key
Open
Update TV’s software
Accesses the specific website to update TV’s software and search if any software updates are available.
Select [Software Update]
---
ab-cd-ef-gh-ij-kl
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
Network Setup
Wired
Access
access
select
•
Follow the on screen instructions
Note
ab-cd-ef-gh-ij-kl
MAC Address
Network Setup
[MAC Address]
•
MAC address is a unique address that identifies hardware in the network.
(for information only)