Operating Instructions
Watching External Inputs
26
Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
•
To connect the equipment (p.10, 11, 89, 90)
The remote control is capable of operating some functions of selected external equipment.
“Operating the equipment with the TV remote control” (p. 27)
TV
1
Turn the TV on
When connecting with SCART as example 2 or 3 (p.10, 11)
Receives input signals automatically when playback starts
•
Input signals are automatically identified by the SCART (pin 8) terminal.
•
This function is also available for HDMI connections (p.89).
If input mode is not switched automatically
Perform
2
and
3
•
Check the setup of the equipment.
2
Display the input selection menu
AV
3
Select the input mode connected to the equipment
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Input Selection
SD Card/USB
select
watch
•
You can also select the input using the AV button on the remote control or the side
panel of the TV (except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
•
[SD Card/USB] : Switches to Media Player “Using Media Player” (p.57)
•
You can label or skip each input mode (except [SD Card/USB]). “Input Labels” (p.48)
Skipped inputs will not be displayed when the AV button is pressed.
4
View
AV1
Displays the selected mode
Note
•
If the external equipment has an aspect adjustment function, set it to “16:9”.
•
For details, see the manual of the equipment or ask your local dealer.
■
To return to TV
TV