Model No.
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2012) of digital services. ● Not all the features are available depending on the country, area, broadcaster, service provider and network environment. ● The compatibility with future services is not guaranteed. ● Check the latest information on the available services at the following website. http://panasonic.
● Do not touch the mains plug with wet hands. ■ Take care ● Do not damage the mains lead. • Do not place a heavy object on the lead. • Do not place the lead near a high temperature object. • Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug. • Do not move the TV with the lead plugged into a socket outlet. • Do not twist the lead, bend it excessively or stretch it. • Do not use a damaged mains plug or socket outlet. • Ensure the TV does not crush the mains lead.
■ Pedestal ■ Ventilation Warning ● Do not disassemble or modify the pedestal. Caution Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components. Minimum distance: Caution ● Do not use any pedestal other than the one provided with this TV. ● Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately.
■ 3D Eyewear Use ■ Viewing 3D Images Caution ● Use the 3D Eyewear only for the intended purpose and nothing else. ● Do not move around while wearing the 3D Eyewear to avoid falling or accidental injury. ● Do not drop, bend, exert pressure on, or step on the 3D Eyewear. ● Be careful of the tips of the frame when putting on the 3D Eyewear. ● Be careful not to trap your fingers in the hinge section of the 3D Eyewear. ● Do not use the 3D Eyewear if it is physically damaged.
Assembling / Removing the pedestal Assembly screw (4) (silver) Bracket Cover M5 × 18 Assembly screw (4) (black) Base M4 × 10 ■ Assembling the pedestal A 1 C D 3 E 2 B ■ Adjusting the panel to your desired angle ● Do not place any objects within the full rotation range. 15° 15° (View from the top) Secure the base as shown below to prevent the TV from falling over. ● The place where the base is secured should be thick enough and made of hard material.
Connections ● External equipment and cables shown are not supplied with this TV. ● Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. ● Check the type of terminals and cable plugs are correct when connecting. ● Always use a fully wired SCART or HDMI cable. ● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
AV devices ■ DVD Recorder / VCR TV Terrestrial aerial SCART cable DVD Recorder / VCR AV1 (SCART) adaptor (supplied) RF cable RF cable ■ DVD Recorder / VCR and Satellite receiver TV Satellite receiver HDMI cable Terrestrial aerial SCART cable SCART cable RF Cable AV1 (SCART) adaptor (supplied) RF Cable RF cable DVD Recorder / VCR Network ● To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment.
Other connections ■ DVD player (COMPONENT equipment) TV (Listening) DVD Player (Viewing) ■ Camcorder / Game equipment (VIDEO equipment) TV (Listening) Camcorder (Viewing) Game equipment ■ Amplifier (to listen with speakers) TV HDMI cable Amplifier with speaker system External equipment (DVD Player, etc.) ● Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio Return Channel) function.
■ Common Interface TV CI module ● If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. ● Insert the module in the correct direction.
Identifying Controls Remote Control 6 APPS ● Displays [APPS list] (applications list). 1 2 3 4 5 13 14 15 16 17 8 9 6 18 7 19 8 20 9 7 OK 10 11 21 10 22 12 13 11 14 23 12 15 16 24 17 18 19 20 1 Standby On / Off switch 2 3D button ● Switches the view between 2D and 3D. 21 22 23 3 [Main Menu] ● Press to access Picture, Sound, Network, Timer, Setup and Help Menus. 4 Text service button 5 Information ● Displays channel and programme information. 24 ● Confirms selections and choices.
Indicator / Control panel ● When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button. 2 Channel Up / Down Cursor Up / Down (when in the menu system) 1 3 Volume Up / Down 2 4 Mains power On / Off switch 3 5 Remote control signal receiver Cursor Left / Right (when in the menu system) ● Use to switch the mains power. 5 4 6 ● Do not place any objects between the TV remote control signal receiver and remote control.
First time Auto Setup Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 7 - 10) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Operations Turn power on ● Mains power On / Off switch should be on. (p. 12) (Remote Control) or (TV) The last viewed [Home Screen] is displayed. Example: [TV Home Screen] Example: Selected content screen ● To return to [Home Screen] at any time ● You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (Watching > my Home Screen).
How to Use eHELP [eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the operations for each feature. 1 Display [eHELP] or [Help] [eHELP] ● [Read first] will be displayed on the top page. Please read these instructions fully to get more understanding of the operation in [eHELP]. ● If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed to select whether [First Page] or [Last Page].
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). ● The 3D Eyewear must be worn to view 3D images. ● This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats. *: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back.
No image can be displayed ● Check the TV is turned on. ● Check the mains lead is plugged into the TV and the socket outlet. ● Check the correct input mode is selected. ● Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external equipment. ● Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum? ● Check all required cables and connections are firmly in place.
Specifications ■ TV Model No. 47-inch model TX-L47ET60B Dimensions (W × H × D) 956 mm × 620 mm × 227 mm (With Pedestal) 956 mm × 564 mm × 35 mm (TV only) Mass 14.5 12.5 Net (With Pedestal) Net (TV only) Model No. 1,067 mm × 682 mm × 265 mm (With Pedestal) 1,067 mm × 627 mm × 35 mm (TV only) 18.0 15.
Aerial input UHF Operating conditions Built-in wireless LAN VHF / UHF Temperature: 0 °C - 35 °C Humidity: 20 % - 80 % RH (non-condensing) Standard compliance and Frequency range*: IEEE802.11a/n 5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz IEEE802.11b/g/n 2.412 GHz - 2.472 GHz Security: WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP (64 bit/128 bit) * The frequency and channel differ depending on the country.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
