Model No. TX-L42WT50B TX-L47WT50B TX-L55WT50B Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Features Smart VIERA Digital smart life to create new and exciting TV experiences (Networking / Easy Operation / Picture Quality / Eco / Design). 3D technology You can enjoy viewing 3D images on this TV by wearing the 3D Eyewear. VIERA Touch Pad Controller VIERA Touch Pad Controller is designed to operate the TV conveniently and intuitively, especially on VIERA Connect or internet contents. freesat HD tuner built-in This TV has a built-in freesat HD tuner.
Transport only in upright position Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/ or performance from usage of such other maker’s peripheral devices. The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content.
Safety Precautions Warning Safety Precautions Mains plug and lead To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. Insert the mains plug fully into the socket outlet. Ensure that the mains plug is easily accessible. Remove the mains plug when cleaning the TV. If you detect anything unusual, Do not touch the mains plug with a wet hand.
Warning To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: Do not remove covers and never modify the TV yourself as live parts are accessible when they are removed. There are no user serviceable parts inside. Do not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.
Caution Ventilation Safety Precautions Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.
Accessories / Options Standard accessories VIERA Touch Pad Controller (p. 8, 12) N2QBYB000015 Batteries (4) (p. 8) R6 Pedestal (p. 8) Mains lead (p. 14) K2CT2YY00090 3D Eyewear (2) (p. 37) N5ZZ00000257 Clamper (p. 16) TMME289 Operating Instructions AV2 (COMPONENT / VIDEO) adaptor (p. 105) K2KYYYY00206 Accessories / Options Terminal adaptors AV1 (SCART) adaptor (p.
3D Eyewear (Rechargeable type) TY-ER3D4ME TY-ER3D4SE Communication Camera TY-CC20W If you need 3D Eyewear additionally, please purchase this optional accessory. Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. For more information: http://panasonic.net/avc/viera/3d/eu.html Quick Start Guide This camera can be used on VIERA Connect (p. 21, 89). Depending on the area, this optional accessory may not be available. For details, consult your local Panasonic dealer.
Assembly screw (4) XSS5+15FNK Assembly screw (2) (silver) XYN4+F10FJ Cover TBL5ZB32332 ( M5 × 15 M4 × 10 Assembly screw (4) (black) XYN4+F10FJK Base TBL5ZX04011 (TX-L42WT50B) TBL5ZX04021 TX-L47WT50B TX-L55WT50B ) Bracket TBL5ZA32771 Quick Start Guide M4 × 10 Preparations Assembling the pedestal Accessories / Options Take out the pedestal and the TV from the packing case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.
Moving the TV Hold the specified parts as shown to stand the TV up and move it with two people. Quick Start Guide Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. Accessories / Options 1 Put the TV onto a work table with the screen panel down on the clean and soft cloth. 2 Remove the assembly screws from the cover. 3 Remove the assembly screws from the TV. 4 Remove the pedestal from the TV.
Identifying Controls Remote Control 8 [Option Menu] 1 2 3 15 9 16 17 7 19 8 20 10 18 11 12 13 21 22 12 23 14 15 16 13 17 24 14 25 18 19 20 21 22 23 24 1 Standby On / Off switch Switches TV on or off standby. (p. 40) Switches the viewing mode between 2D and 3D. [Main Menu] (p. 44) Press to access Picture, Sound, Network, Timer and Setup Menus. Information (p. 23) Displays channel and programme information. VIERA TOOLS (p.
VIERA Touch Pad Controller This touch pad controller is designed for the convenient operations, especially, on VIERA Connect or internet contents. You can operate the TV intuitively with this controller. The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to register will appear in “Auto Setup” for first using the TV. (p. 20) After registering, you can operate the TV without pointing this controller at the TV (except Standby On / Off switch).
Indicator / Control panel 2 C.A.T.S. (Contrast Automatic Tracking System) 5 6 2 3 4 7 Rear side of the TV 1 Power and Timer LED Identifying Controls Red: Standby Green: On Orange: Timer Programming On Orange (flash): Recording of Timer Programming, Direct TV Recording or One Touch Recording in progress Red with orange flash: Standby with Timer Programming On, Direct TV Recording or One Touch Recording The LED blinks when the TV receives a command from the remote control.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. There are some restrictions on placement for viewing 3D images. For details (p. 36) Terminals Quick Start Guide Basic Connection 1 2 3 4 5 6 7 8 9 10 11 12 2 1 3 4 6 7 8 9 10 11 12 CI slot (p. 69) SD Card slot (p. 75, 78) USB 1 - 3 port (p. 75, 78, 105) HDMI1 - 4 (p. 15, 105) Headphone jack (p.
AV devices Player / 3D compatible player TV Player / 3D-compatible player HDMI cable Terrestrial aerial DVD Recorder / VCR Basic Connection AV1 (SCART) adaptor Aerial input terminal SCART cable RF cable Quick Start Guide DVD Recorder / VCR TV RF cable DVD Recorder / VCR and Cable TV Cable Cable TV box HDMI cable TV Terrestrial aerial AV1 (SCART) adaptor SCART cable Aerial input terminal RF Cable SCART cable RF Cable RF cable DVD Recorder / VCR Supplied with this TV Note Connect t
Network To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance. Prepare the internet environment for wired connection or wireless connection. Setup of the network connection will start after the tuning (when first using the TV). (p.
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 14 - 16) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. Plug the TV into mains socket and switch on 2 Select your country Takes a few seconds to be displayed.
2 Region selection screen may appear. select region Channel Sorting by Region GBR> Best signal quality (All Regions) England Regions> access (select repeatedly until you reach the available region) 3 Setup the network connection Quick Start Guide Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 21, 89). Please note that this TV does not support wireless public access points. Ensure the network connections (p.
3 3. Enter the encryption key of the access point Wireless Network Settings Set characters Encryption key A B C D E F G H U V W X Y Z 0 I J K L M N O P Q R S T 1 2 3 4 5 6 7 8 9 ! : a b c d e f g h i j k l m n o p q r s t u v w x y z ( ) + - . * _ @ / “ ‘ % & ? , ; = $ [ ] ~ < > { } | ` ^ # \ 1 .!:# 4 ghi 7 pqrs 2 abc 5 jkl 8 tuv Store select 3 def 6 mno set You can set characters by using numeric buttons.
4 How to input Owner ID 1 Enter the PIN number (4 digits) Enter the PIN number twice at first setting.
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, EPG, communication tools, etc. from VIERA Connect home screen. This TV does not support full web browser function and some features of the websites may not be available. 1 Turn power on Press for about 1 second. Mains power On / Off switch should be on. (p.
Watching TV 1 Turn power on Press for about 1 second. Mains power On / Off switch should be on. (p. 13) VIERA Connect introduction banner appears Every time you turn on the TV, this banner appears at the bottom of the screen. You can access to VIERA Connect easily and enjoy the various (p. 21) contents. To remove this banner, leave for about 5 seconds or press any buttons (except the buttons to access VIERA Connect). To set this banner display off [VIERA Connect Banner] (p.
Other useful functions Display Information banner Display Information banner Also appears when changing a channel. 1 2 3 5 6 7 4 Example: DVB HDTV ZDF C Coronation Street 20:00 - 20:55 2 Now Info Mute Bad signal Dolby D+ 1 20:35 All DVB Channels Select favourites AD 1 Channel position and name 2 Channel type ([Radio], [Data], [HDTV], etc.) / 45 6 Progress time indicator of the selected programme (except Analogue) 7 [All DVB Channels], [freesat Channel List], [All Other Sat.
Display the selectable settings for the current status Confirm or change the current status instantly To change select select / change access store [Voice Guidance Settings] Guidance settings for visually (p. 48) impaired users [Audio Description] (DVB) Set to [Auto] if the programme has Audio Description service, then you will hear an additional audio track to describe events on screen To adjust the volume for Audio Description [Audio Description Menu] (p.
Aspect Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 107).
Using TV Guide TV Guide Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before TV Guide is completely shown. (freesat) Using TV Guide 1 Select freesat 2 Display the Channel Genre selection list 3 Select the genre and view TV Guide (p.
To view a channel list of the selected genre To search programme types and view a channel list of the searched programmes (Channel Genre list) (blue) Channel Genre All Channels (yellow) (Search list) select type Search All Channels view Entertainment News & Sport Search Titles... Movie News and Factual To list favourite channels (p. 58) Favourites To search programme titles and view a list of the searched programmes (yellow) (Search list) 1 Select 2 Set characters [Search Titles...
To change the layout of TV Guide To view a channel list of the selected category [TV Guide View] (p. 49) (blue) (Category list) To the previous day (DVB) Category All Channels (red) To the next day (DVB) View details of the programme (DVB) 1 Select the programme view All Channels All HD Channels All DVB Channels All Analogue Channels Free DVB Channels TV/Data DVB Channels Favourites1 Favourites2 Favourites3 Favourites4 (green) 2 View details Press again to return to TV Guide.
To check / change / cancel a timer To return to TV Guide programming event “Timer Programming” (p. 64, 65) If you select the current programme If a programme exists in both HD and SD A confirmation screen asking whether you want to watch or record the programme appears. Select [Timer Programming] and set [Ext Rec.], [USB HDD Rec.] or [SD Card Rec.] to record from the time you finish the timer programming event setting. The [Timer Options] screen will be displayed to select HD or SD broadcast.
(Other Sat. / Satellite ) In Other Sat. or Satellite mode, TV Guide is not available. In stead, Channel List will appear. To tune in Other Sat. / Satellite Channels (p. 62) 1 Select Other Sat. 2 Display the Channel List Example: Example: All Other Sat. Channels Using TV Guide 2 3 4 5 6 7 8 To return to TV 3 freesatHome freesatSSU Brit Shorts HINRG LOWNRG WELL Class GROOVE - Select the channel select or watch 30 / Satellite (p.
Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) The availability of teletext services for a programme is indicated by [TEXT] in the information banner. Information banner 1 BBC ONE WALES 20:35 All DVB Channels Select favourites Coronation Street 20:00 - 20:55 Now (p. 23) Displayed if programme has teletext service TEXT Depending on the broadcaster, the digital teletext (MHEG) services may not be available.
Analogue teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriate coloured button. This facility enables fast access to information on the subjects shown.
FULL / TOP / BOTTOM (green) (TOP) (BOTTOM) Normal (FULL) (Expand the TOP half) (Expand the BOTTOM half) View in multi window Watch TV and Teletext in two windows at once Operations can be made only in Teletext screen. Each time pressed: Teletext TV and Teletext TV If you use Subtitles, do not change number on blue button.
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. To connect the equipment (p. 14 - 16, 105, 106) The remote control is capable of operating the contents or external equipment. (p. 35) 1 Turn the TV on When connecting with SCART (p. 15) Receives input signals automatically when playback starts Input signals are automatically identified by the SCART (pin 8) terminal. This function is also available for HDMI connections (p. 105).
Operating the contents or equipment with the TV remote control You can operate the contents in Media Player / media servers, recording functions or the connected equipment with the below buttons of this TV remote control.
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. “Standard accessories” (p. 7) This TV supports [Frame Sequential] 1, [Side by Side] 2 and [Top and Bottom] 3 3D formats. 1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back. 2, 3: Other available 3D formats How to view the 3D images (p.
3D Eyewear Use Pay special attention when children are using the 3D Eyewear. 3D Eyewear should not be used by children younger than about 5 - 6 years old, as a guideline. All children must be fully supervised by parents or guardians who must ensure their safety and health throughout the using 3D Eyewear. Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any accidental damage or injury.
Part names and functions Power switch ON / OFF Slide the tab to the “ON” / “OFF” position to switch the power On / Off. MODE Slide the tab to the “MODE” position to change the mode between 3D and 2D (view a 3D image in 2D). This is also used when registering the 3D Eyewear to the TV. For details “Registration” (see below) Indicator lamp Lights or flashes during use to show the status.
Registration again When connection with registered TV fails, or when using with another TV, re-register the 3D Eyewear. 1 Turn the TV on 2 Within 50 cm from the TV, hold the power switch on the “MODE” position for more than 2 seconds Release the power switch when registration starts. 3 The green LED lights for 3 seconds when the registration is successfully completed Note If the registration failed, the 3D Eyewear will be turned off. In this case, turn off the TV and perform from step 1.
To view the 3D images You can enjoy the 3D images in a variety of ways. (Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.) Playing back 3D-compatible Blu-ray disc (Frame Sequential format) Connect the 3D-compatible player via a fully wired HDMI compliant cable. If input mode is not switched automatically, select the input mode connected to the player. (p. 34) If you use the non 3D-compatible player, the images will be displayed on 2D mode.
To change 3D format manually When the image is not changed properly using [3D], [2D] or [2D During the above operation 3D] mode, use this manual setting.
3D Settings If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings.
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. For [VIERA Link] function to operate correctly, ensure the connections and settings are completed. “Summary of Q-Link and VIERA Link features” (p. 97), “Preparations” (p. 100) After connection, turn the equipment on and then switch the TV on.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. 1 Display the menu 2 Select the menu Displays the functions that can be set (varies according to the input signal). select Main Menu access Picture Sound Network Timer How to Use Menu Functions Setup Select the item 3 To return to TV at select 1/2 any time Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour C.A.T.S.
Menu list Menu Item Viewing Mode Adjustments / Configurations (alternatives) Picture In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [C.A.T.S.], [P-NR] and [3D-COMB] can be adjusted and stored for each input. Additionally, you can adjust and setup the detailed settings when [Advance(isfccc)] in the Setup Menu is set to [On]. (p. 51) You can set [Viewing Mode] in 2D and 3D mode for each.
Menu Item 3D-COMB Picture in Picture Displays two windows at once (p. 71) 3D Settings Adjusts and sets to view 3D images (p. 42) Screen Display Turns the screen off when you select [Off] [Off] / [On] The sound is active even if the screen turns off. Press any buttons (except Standby) to turn the screen on. This function is effective in reducing power consumption when listening to the sound without watching the TV screen.
Menu Item Adjustments / Configurations (alternatives) Bass Adjusts level to enhance or minimise lower, deeper sound output Treble Adjusts level to enhance or minimise sharper, higher sound output Equaliser Adjusts the frequency level to suit your favourite sound quality This function is available when [Mode] is set to [User]. Select the frequency and change the frequency level by using the cursor button. To enhance the bass sound, raise the level of the lower frequency.
Menu Item HDMI1 / 2 / 3 / 4 Input Voice Guidance Settings Audio Description Menu Sound How to Use Menu Functions Network Selects to fit the input signal [Digital] / [Analogue] (p. 111) [Digital]: When sound is carried via the HDMI cable connection [Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection For HDMI input Voice Guidance Set to [On] to enable voice guidance of the basic features (EPG, on-screen messages, etc.
Menu Item TV Guide Settings TV Guide View Adjustments / Configurations (alternatives) Changes the layout of TV Guide [Normal] / [Full] / [Info] [Normal]: Default TV Guide screen [Full]: Displays channels and programmes full-screen without the operation guide [Info]: Displays details of the selected programme at the bottom without the operation guide Eco Navigation Automatically sets the TV to the most suitable energy-saving mode If you press the OK button, the following items are set as below: [C.A.
Menu Item Auto Setup Channel Sorting by Region Automatically searches for the receivable channels (p. 56) Automatically sorts tuned channels according to the available region (p. 60) For DVB mode Tuning Menu* Language Setup How to Use Menu Functions Manual Tuning Searches for the channels manually (p. 61) Not valid on freesat mode Update Channel List Updates the channel list while keeping your settings (p.
Menu Item Adjustments / Configurations (alternatives) Display Settings Playing Time Display Set to [On] to display a continuous record of time spent using Game mode in the top right of the screen every 30 minutes [Off] / [On] This function is available when [Viewing Mode] is set to [Game]. (p. 45) Radio Mode Sets the timer for turning off the screen automatically when a radio channel is selected [Off] / [5] / [10] / [15] / [20] (seconds) The sound is active even if the screen turns off.
Overview (Picture, Sound, Network, Timer, Setup) How to operate (p. 44) 1/2 Main Menu Picture Sound Network Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Vivid Colour C.A.T.S.
Main Menu Picture Timer Programming Off Timer Auto Standby Access Off Off Timer Programming Function (p. 48) D 72 BBC 2W Reminder D 14 E4 The Bill Ext Rec. D 1 BBC ONE DIY SOS Ext Rec. D BBC ONE Sound Network Wed 26 Oct 2011 10:46 No. Channel Name Ext Rec. --- Date Start 20:00 21:30 (90 min.) Wed 26 Oct 21:00 22:00 (60 min.) Wed 26 Oct 22:45 23:00 (15 min.) Thu 27 Oct 10:30 11:30 (60 min.) Guide S/P STTL --- End Wed 26 Oct --:-- --:-- Timer --:-- (p.
Overview (Setup) How to operate freesat Tuning Menu (p. 44) Favourites Edit Channel List Regional Channel Edit Auto Setup Signal Condition Main Menu Picture Access Access Access Access Access For freesat (p. 58) Sound Network 1/2 TV Guide Settings Eco Navigation Recording Setup Bluetooth Setup VIERA Touch Pad Controller Link Settings Child Lock freesat Tuning Menu DVB Tuning Menu Analogue Tuning Menu Other Sat.
freesat Favourites Editor freesat Channel List 101 102 103 104 108 109 110 freesat Auto Setup Searching 0 Signal Quality 0 Signal Strength 8 TV Channels Found 2 Radio Channels Found 1 Data Channels Found Channels found, creating channel list 10 10 1 7 14 70 72 105 719 720 BBC 1 Scotland BBC 2 Scotland stv stv BBC THREE BBC FOUR BBC HD freesat Channels BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Favourites (p. 58) (p. 58) (p.
Retuning from Setup Menu Automatically retune the channels received in the area. This function is available if channel tuning is already performed. Only the selected mode is retuned. All the previous tuning settings are erased. If Child Lock PIN number (p. 66) has been set, the PIN number is required. freesat channels 1 Select freesat 2 Display the menu and select [Setup] (p.
DVB or Analogue channels 1 Select the mode 2 Display the menu and select [Setup] (p. 22) select Setup 3 Select [DVB Tuning Menu] or [Analogue Tuning Menu] select DVB Tuning Menu Analogue Tuning Menu 4 access Access Access access The displayed item depends on the selected mode.
Tuning and Editing Channels (freesat) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. 1 Select freesat 2 Display the menu and select [Setup] (p.
Replace the regional channels [Regional Channel Edit] You can replace some regional channels with the available channels from another region channel.
To edit Favourites list While the cursor is in the Favourites field to edit To move the channel Select the Select the new position turn (green) To delete the channel Store (green) or To delete all channels (yellow) To name the Favourites Set characters (maximum 10 characters) Store select User input (red) Name To use numeric buttons 3 Store set (p. 114) Note Channel position numbers (known as logical channel numbers) can be swapped in Channel List.
Set DVB channel manually [Manual Tuning] Normally use [Auto Setup] or [Update Channel List] to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial, use this function. DVB Manual Tuning Frequency Signal Quality Signal Strength No.
(Other Sat.) / (Satellite) You can tune all receivable digital satellite channels and create your channel list, etc. Some of Other Sat. / Satellite functions may work to differing specifications (depending on the broadcasters). 1 Select freesat or Other Sat. 2 Display the menu and select [Setup] select Setup 3 / Satellite (p. 22) access Select [Other Sat. Tuning Menu] / [Satellite Tuning Menu] select Other Sat.
Add Other Sat. / Satellite channels automatically [Add New Channels] You can add any new channels found automatically to Channel List. 1 Check the signal condition It takes a while to check the connection for your selected satellite. Ensure that the Signal Lock status is shown as “Locked”. If it is not locked, the search cannot be executed. If the status is shown as “Not locked” and Signal Quality / Signal Strength have no indications, please check the dish alignment.
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the external recorder, the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 28). Timer Programming can store up to 15 events.
: Overlapped timer programming events Timer programming - Programmes according to the time setting Timer Programming Function D 72 BBC 2W Reminder D 14 E4 The Bill Ext Rec. D 1 BBC ONE DIY SOS Ext Rec. D BBC ONE --- Duration (automatic display) Records with subtitles (if available) To indicate this (yellow) (Press again to remove subtitles) Wed 26 Oct 2011 10:46 No. Channel Name Ext Rec. --- Date End 20:00 21:30 (90 min.) Wed 26 Oct 21:00 22:00 (60 min.
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. Setting [Shipping Condition] (p. 67) erases the PIN number and all settings.
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings other than [Owner ID] and [USB HDD Setup] are reset (channels, picture, sound settings, etc.). To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p.
Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft, the Owner ID will help the Police to determine the owner. 1 Display the menu and select [Setup] select Setup 2 access Select [System Menu] select System Menu Access access 3 Select [Owner ID] select System Menu Owner ID access Access Input owner ID [Owner ID] 1 Enter the PIN number (4 digits) Enter the PIN number twice at first setting.
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This TV works only for Pay TV modules complying with CI standard. Video and audio signals may not be output depending on broadcasts or services. CI slot Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader.
Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. To download (Press the EXIT button not to download) You can update new software automatically or update manually.
Multi Window Enjoy viewing the digital TV programme and external input (AV, Component or HDMI) at once. Display the menu and select [Picture] 1 select Picture access Select [Picture in Picture] 2 select Picture in Picture access Access Remote control operations apply to the main screen.
Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 105) 1 Select the external input 2 Select [PC] select Input Selection AV1 AV2 PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB access Corresponding signals (p. 113) If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported. PC menu setting To make settings Menu “How to Use Menu Functions” (p.
Advanced Picture Settings You can adjust and setup the detailed picture settings for each Viewing Mode. To use this function completely, set [Advance(isfccc)] to [On] in the Setup Menu. (p. 51) For PC input mode, some functions are available without setting [Advance(isfccc)]. 1 Select the input mode to adjust and setup 2 Display the menu and select [Picture] (p.
Lock the picture setting [Lock Settings] [White Balance], [Colour Management] and [Gamma] can be locked for each Viewing Mode and each input. Additionally, [Contrast], [Brightness], [Colour], [Sharpness], [Tint] and [Reset to Defaults] in the Picture Menu can be locked for [Professional1] and [Professional2].
Preparation for USB HDD / SD Card USB HDD Connect the USB HDD to the USB 1 port with the USB cable. Be sure to connect the USB HDD to the socket outlet. To remove the USB HDD safely from the TV (p. 24, 76) Check the type of terminals and cable plugs are correct when connecting. SD Card Unlock the write-protection switch (on the left side of the SD Card) to record and play back. When connecting a USB device to the USB 1 port, there may be a difficulty to insert / remove the SD Card.
2 Caution and confirmation of using USB HDD Select [Yes] to proceed USB HDD Formatting USB HDD Formatting Yes USB HDD Formatting This device will be formatted and all contents deleted. Are you sure? To use this device for recording, it must be formatted first. Continue? The data recorded to the USB HDD with this TV can only be played back on this TV. You cannot playback it with other TV (including the TV of the same model number) or any PCs.
One touch direct TV recording - What you see is What you record [One Touch Recording] Records the current programme in the USB HDD or the SD Card immediately. Confirm the code of the remote control is “73” (p. 35). Select the maximum recording time [30] / [60] / [90] / [120] / [180] (minutes) LED will turn to orange (flash) while One Recording Setup select Touch Recording is in progress. “Indicator / Control panel” (p.
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory, and contents recorded with this TV on the recording devices (SD Card / exclusive USB HDD). Photo mode: Still pictures recorded by digital cameras will be displayed. Video mode: (For SD Card / USB Flash Memory) Moving pictures recorded by digital video cameras will be played back.
Starting Media Player 1 Insert the SD Card or USB Flash Memory to the TV (p. 78) To play back contents in the USB HDD, check the connection and settings are completed. 2 (p. 75) Confirm the message and start Media Player You can also start by pressing following button. “Watching External Inputs” (p. 34) 3 Select the device to access Drive Select EXIT Select RETURN Access USB HDD1 SD Card select access USB Flash...
Photo mode Supported file format (p. 107) The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [All photos] Media Player Photo All photos To change the size of photos on a thumbnail screen select [Change Size] change : Error display View Select Slideshow Info EXIT Option Menu RETURN View Select Drive Select SD Card Contents Select [Single view] - Photos are displayed one at a time.
Multi Shot 3D This TV can create the 3D photo using a pair of photos in the SD Card and save it into the same SD Card. This TV can also create the 3D photo from photos in the USB Flash Memory, but cannot save it. This function is available with photos recorded by digital cameras. You cannot save the photo into the SD Card while SD Card recording is in progress or set in Timer Programming.
Menu Item Adjustments / Configurations (alternatives) Slideshow Settings Using Media Player Frame Selects the frame type of the slideshow [Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] / [Gallery] / [Cinema] [Multi]: 9 photos are displayed orderly at once. [Collage]: Each photo is displayed at a random position and random scale. [Drift (+ calendar)] / [Drift]: Photos are displayed like flow images. You can select to display the calendar or not.
Video and Recorded TV mode Supported file format (p. 108, 109) Video mode (For SD Card / USB Flash Memory) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Title view] Media Player Video Title view The preview will start when the title / scene is highlighted if it supports a preview. To turn off the preview “Video Setup” (p.
Video Setup Setup the settings for Video mode. Menu items and selectable options vary depending on the content. 1 Display the option menu 2 Select [Video Setup] 3 Select the items and set select Option Menu Video Setup access / store Menu Item Adjustments / Configurations (alternatives) Video Setup Using Media Player Video Preview Sets to start the preview of the title or scene in the thumbnail view [Off] / [On] Image may not be displayed for an instant in the thumbnail view.
Playback from the list 2 Start playback 1 Select the content If you stopped the last playback on the way, the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning. (USB HDD only) If the content has multiple programmes with the different parental ratings, the highest restriction is valid for the content. Once you unlock the restriction, all the programmes in the content can be played back.
To repeat between the starting point “A” and finishing point “B” Set “A” and “B” in order • The points will be reset by pressing this button (blue) again or other operations. To change aspect To the previous / next chapter (red) / (green) • A recorded content is automatically divided into chapters (about 5 minutes for each). To display the subtitle (if available) To confirm or change the current status (if available) “Display the selectable settings for the current status” (p.
Music mode Supported file format (p. 109) The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Folder view] Media Player Music Folder view To play back the selected folder Select the folder Start playback My Music_1 My Music_2 Access Select Play Folder My Music_3 EXIT RETURN (red) Info Option Menu Drive Select SD Card Contents Select Playback from File view Selected file will be played back.
Using Network Services (DLNA / VIERA Connect / freesat) DLNA® This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. To enable this function, connect this TV to your home network. “Network connections” (p. 90), “Network Setup” (p.
Sharing the TV programme or contents of this TV with the other network equipment You can enjoy the current digital TV programme or the contents 1 of this TV on the other DLNA Certified VIERA 2, your smartphone, etc. connected to your home network. For example, watching the continuation of the current programme on your smartphone in the other room, etc. To use this function, set [DLNA Server Settings] of this TV. (p.
Network connections To use only DLNA features, you need a home network environment and you can operate the features without broadband network environment. To use VIERA Connect features, you need a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance. Dial-up internet connections cannot be used. Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively.
Network Link settings Sets the link settings to access and control this TV from the network equipment (PC with Windows 7 installed, smartphone, DLNA Certified VIERA, etc.) via the network.
3 Select [Proxy Settings] and set the items select Proxy Settings After settings, return to the previous menu. access Access [Proxy] Sets Proxy address. This is the address of the relay server that is connected to the target server instead of the browser and sends data to the browser. Setting is required if specified by the provider. 1. Select [Proxy] 3. Store 2. Enter the address Proxy Proxy Settings Proxy Proxy Port Host 0 select set You can set characters by using numeric buttons.
4 Access the encryption key input mode Encryption Key Setting Connection will be made with the following settings:Network Name(SSID) : Access Point A Security type : WPA-PSK Encryption type : TKIP Please input the encryption key. If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point.
Using DLNA® features Ensure the preparation of the media server, network connections and network settings are completed. (p. 88 - 93) 1 Display [VIERA TOOLS] and select [Media Server] Media Server 2 select access Select one of the media servers to access Example: Media server list Media Server select SERVER1 SERVER2 SERVER3 DIGA access Select For the operations to access the other TV, select a name or MAC Address of the other TV from this list.
For video file Playback - Playback will start. If you stopped the last playback on the way, the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning. Example: Playback MEDIA SERVER V100025 00:15:39 To display / hide the To operate the playback 00:02:05 operation guide and Rewind information banner [Manual skip] Press to skip forward about 30 seconds.
Menu Slideshow Settings Video Setup Music Setup Using Network Services (DLNA / VIERA Connect / freesat) Adjustments / Configurations (alternatives) Transition Effect Selects the transition effect for switching the photo during the slideshow [Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random] [Fade]: The next photo fades in gradually. [Slide]: The next photo slides and appears from the left side. [Dissolve]: Each photo is dissolved when switching to the next photo.
Link Functions (Q-Link / VIERA Link) Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 99) VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control, convenient recording, playback, energy saving, creating home theatre, etc., without complicated setting. (p. 100 - 104) You can use Q-Link and VIERA Link functions together. This TV supports “HDAVI Control 5” function.
VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with VIERA Link function Features Analogue channel download Easy playback Power on link Power off link Reduce unnecessary power consumption in Standby Auto standby for unnecessary equipment Pause Live TV programme Direct TV Recording Control the menu of the connected equipment by VIERA remote control Speaker control – Blu-ray Disc theatre with VIERA Link function – 5 5 – 6 3 – – 6 – – 1 – – – – 3 3 Amplifier with VI
Q-Link Preparations Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)” Q-Link connection (p. 97) Use fully wired SCART cable. Set up the DVD Recorder / VCR. Read the manual of the recorder. Q-Link terminal setup in the Setup Menu [AV1 out] (p.
VIERA Link “ ” Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 97, 98). These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
Reduce unnecessary power consumption in Standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 49) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation with the TV on / off state to reduce the consumption. When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption of the connected equipment is automatically minimised.
Pause Live TV programme [Pause Live TV] You can pause the current TV programme and resume later. The current TV programme will be recorded on HDD of the connected DIGA Recorder. This function is available with a DIGA Recorder which has HDD. If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA Recorder which has HDD to the TV’s lower HDMI terminal number.
2 Select [VIERA Link Control] Pause Live TV Direct TV Rec VIERA Link Control Speaker Selection 3 select VIERA Link Menu Start Start Recorder Home Cinema access Select the equipment to access Select the type of the connected equipment and access.
Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver. If you cannot operate, check the settings and the equipment. “Summary of Q-Link and VIERA Link features” (p. 97, 98), “Preparations” (p.
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the basic connection (p. 14 - 16), the table (p. 106), and the specifications (p. 125 - 127). Check the type of terminals and cable plugs are correct when connecting. To use the specific devices supporting Bluetooth wireless technology “Bluetooth Setup” (p.
Rear of the TV Headphones (M3 stereo mini plug) To adjust volume [Headphone Volume] (p. 47) To listen with speakers Optical digital audio cable Amplifier with speaker system To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 25) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode. Aspect Control Signal Input terminal Input signal format DVB PAL I PAL 525/60 6.0 MHz M.NTSC 6.
Video Container Video codec Audio codec Details / Restrictions AVCHD .mts H.264 Dolby Digital AVCHD Standard Ver. 2.0 (AVCHD 3D, AVCHD Progressive) The data may not be available if a folder structure on the device is modified. SD-Video .mod MPEG1 MPEG2 Dolby Digital MPEG Audio SD-Video Standard Ver. 1.31 (Entertainment Video Profile) The data may not be available if a folder structure on the device is modified. .mov .qt DivX3 DivX4 DivX5 DivX6 H.
Container 3GPP File extension .3gp .3g2 .mpg .mpeg .vob .vro PS .m2ts .tp .trp .ts TS Video codec Audio codec Details / Restrictions H.264 MPEG4 SP/ASP AAC HE-AAC – H.264 2 MPEG1 MPEG2 VC-1 2 AAC 2 Dolby Digital Dolby Digital Plus 2 HE-AAC 2 LPCM MPEG Audio MP3 2 2: This codec can be played back only in Media Player. H.264 MPEG1 MPEG2 VC-1 3 AAC Dolby Digital Dolby Digital Plus DTS core 3 HE-AAC MPEG Audio MP3 3 3: This codec can be played back only in Media Player.
To show DivX VOD registration code [DivX® VOD] (p. 51) If you want to generate the new registration code, you have to deregister the current registration code. After playing DivX VOD content once, the confirmation screen to deregister will be displayed in [DivX® VOD] in the Setup Menu. If you press the OK button on the confirmation screen, the deregistration code will be generated and you will not be able to play any contents that you purchased using the current registration code.
Recording time for the USB HDD / SD Card Recording Recording device Recording mode USB HDD SD Card 1 TB [DR] 2 GB 16 GB 48 GB 64 GB For HD broadcast 87 hours 9 minutes 1.5 hours 4.5 hours 6 hours For SD broadcast 217 hours 24 minutes 3.5 hours 12 hours 16 hours [LT1] 290 hours 32 minutes 5 hours 16 hours 21 hours [LT2] 580 hours 1 hour 10 hours 32 hours 43 hours These recording times are approximate for the continuous recording. Actual recording time may be different.
Note Audio settings can be made on [HDMI1 / 2 / 3 / 4 Input] in the Sound Menu. (p. 48) If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”. These HDMI connectors are “type A”. These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. Equipment having no digital output terminal may be connected to the input terminal of component or video to receive analogue signals.
USB Gamepad Some of the keys of gamepads correspond to the operation of the remote control.
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you reach the User input desired character. Name A B C D E F G H U V W X Y Z I J K L M N O P Q R S T 0 1 2 3 4 5 6 7 8 9 ! : # a b c d e f g h i j k l m n o p q r s t u v w x y z ( ) + - . * _ 1 .
How to use Windows 7 as a media server Follow the examples below to set up Windows 7 for use as a media server. Confirm the MAC Address of VIERA in [Network Status] (p. 48). The following procedure and screens are examples. For more information, refer to the help functions of Windows 7. 1 Open the Windows start menu and select [Control Panel]. Select [HomeGroup] in Control Panel window.
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned Check the position, direction and connection of the aerial or dish. Check [Signal Condition] (p. 61).
Problem Causes / Actions Screen Sound Chaotic image, noisy Set [P-NR] in the Picture Menu to remove noise. (p. 45) Check nearby electrical products (car, motorcycle, fluorescent lamp). No image can be displayed Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum? (p. 45) Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external equipment. (p. 34) Blurry or distorted image (no sound or low volume) Reset channels.
Problem HDMI Sound is unusual Pictures from external equipment are unusual when the equipment is connected via HDMI Check the HDMI cable is connected properly. (p. 105) Turn the TV and equipment off, then turn them on again. Check an input signal from the equipment. (p. 113) Use equipment compliant with EIA/CEA-861/861D. Cannot connect to the network Check the LAN cable or wireless LAN is connected properly. (p. 90) Check the connections and settings. (p.
On-screen messages Message Meaning / Action All tuning data will be erased [Shipping Condition] will erase all tuning data. Are you sure ? Confirm correct operation. Are you sure you want to delete this timer ? Press OK to delete timer. Press RETURN to return. Confirm correct operation. Bad signal The signal is weak. Check the aerial / dish is plugged in properly. It may be necessary to have an aerial / dish installer check the signal and aerial / dish alignment. Reset channels. (p.
Message On-screen messages 120 Meaning / Action No recording - Check media The tape or disc may be “write protected”, full, missing or damaged. No recording - Playing The equipment may be playing the tape or disc. No recording - Unknown reason The recording may not be performed. Check the equipment. No service The broadcaster has stopped the service. Check the channel in the TV Guide. (p. 26) No signal The TV cannot detect the signal. Check the connection of the RF cable.
Media Player / Network Message Meaning / Action An internal error occurred. Check the settings. (p. 90 - 93) Cannot read file The file is broken or unreadable. Check applicable data format. (p. 107 - 109) Communication with the server failed. This might be a problem of the media server. Read the manual of the server software. Connection to the server failed. Check the connections and settings. (p. 90 - 93) Ethernet cable not connected Check the connection of the LAN cable.
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.
This product incorporates the following software or technology: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software based in part on the work of the Independent JPEG Group, (4) the software developed by the FreeType Project, (5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or, (6) open sourced software other than the software licensed under the LGPL.
Index A Accessories ·······························7 Advanced Settings·············46, 73 Analogue Tuning Menu······57, 58 Aspect······························25, 107 Astra ·························· 14, 62, 116 Audio Description ··············24, 48 Auto Gain Control ····················47 Auto Setup ·························17, 56 Auto Standby ···························48 AV1 out ······························49, 98 H HDMI ······················111, 114, 126 HDMI Content Detection··········49 Home Cinem
Specifications Product fiche Manufacturer Panasonic Corporation Model No. TX-L42WT50B TX-L47WT50B TX-L55WT50B Energy efficiency class A+ A+ A+ Visible screen size (diagonal) 107 cm / 42 inches 119 cm / 47 inches 139 cm / 55 inches On mode average power consumption 56 W 69 W 91 W Annual energy consumption 1 78 kWh 95 kWh 127 kWh 132 W 152 W Rated power consumption 119 W Standby power consumption 2 0.20 W Off mode power consumption 0.
DVB-S / S2 Receiver frequency range - 950 MHz to 2,150 MHz LNB Power and Polarisation - Vertical: +13 V Horizontal: +18 V Current: Max. 500 mA (overload protection) 22 kHz Tone - Frequency: 22 kHz ± 2 kHz Amplitude: 0.6 V ± 0.2 V Symbol Rate - Max.
3D Eyewear (TY-ER3D4MA) Dimensions (W × H × D) 167.7 mm × 42.2 mm × 170.7 mm Mass Approx. 31 Lens type Liquid Crystal Shutter Usage temperature range 0 °C - 40 °C Battery Coin-shaped lithium battery CR2025 Operation time: Approx. 75 hours in continuous use of the battery made by Panasonic Viewing range Within 3.2 m from front surface of the TV Materials Main body: Resin Lens section: Liquid crystal glass Communication system 2.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
