Model No. TX-L42U5E TX-L32C5E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Contents SAFETY PRECAUTIONS..................................................................................................... 3 Warning ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3 Caution.............................................................................................................................. 4 Maintenance..........................
SAFETY PRECAUTIONS Warning Handling the mains plug and lead the mains plug fully in to the socket outlet. (If the • Insert mains plug is loose, it could generate heat and cause fire.) that the mains plug is easily accessible. • Ensure not touch the mains plug with a wet hand. This may • Do cause an electrical shock. not damage the mains lead, damaged lead may cause • Do fire or electrical shock. −− Do not move the TV with the lead plugged in to a socket outlet.
Caution Maintenance When cleaning the TV remove the mains plug First, remove the mains plug from the socket outlet. • Cleaning an energised TV may cause electrical shock. Remove the mains plug from the wall socket when TV is not in use for a prolonged period of time TV will still consume some power even in the off mode, • The as long as the mains plug is still connected. the mains plug from the wall socket before • Remove connecting or disconnecting leads.
Notice for DVB functions This TV is designed to meet the standards (as of August, 2010) of DVB-T (MPEG2 and MPEG4‑AVC(H.264)) digital terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services. Consult your local dealer for availability of DVB-T services in your area. Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C.
Standard Accessories Attaching the Pedestal Check you have all the items shown. Remote Control (TZZ00000007A) Batteries (R03 AAA) x2 Warning Do not disassemble or modify the pedestal. the TV may fall over and become damaged, and • Otherwise personal injury may result. Caution Do not use any pedestal other than that provided with this TV. the TV may fall over and become damaged, and • Otherwise personal injury may result. Do not use the pedestal if it becomes warped or physically damaged.
Installing Pedestal (TX-L42U5E) Installing Pedestal (TX-L32C5E) 1. Place the LCD TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket) for protecting the display screen. 2. Use four assembly screws to fasten the neck to the base securely. 1. Place the LCD TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket) for protecting the display screen. 2.
Wall-hanging (Not supplied) TX-L42U5E Wall-hanging Insets Depth of screw : minmum 8 mm maximum 11 mm Diameter : M6 Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV) (View from the side) TV Size 42 inch VESA standard interface 200 x 400 mm Wall-hanging Insets Depth of screw : minmum 8 mm maximum 11 mm Diameter : M6 Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV) (View from the side) 8 Warning other wall-hanging brackets, or installing a w
PART NAMES AND FUNCTIONS TV Controls/ Indicators 1 Remote Control Signal Receiver not place any objects between the TV • Do remote control signal receiver and remote control. 2 Power Indicator 3 4 Red: Standby Green: On Green blink: Receiving a command from the remote control. 3 VOL +/- to change volume. • Used to adjust the value of the selected item • Used on On-Screen Menu. 5 4 CH / 6 Used to change channels. 1 • Used to select item on On-Screen Menu.
Connections Computer Connection Cable used for connection (This cable is not supplied with this LCD TV.) PC/VGA Cable (D-SUB 15pin) HDMI Cable Audio Cable [L/R] • • • Note: When connecting the cable, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet. Turn LCD TV and peripheral equipment on before your computer is switched on.
Remote Control Batteries Installation AC Power Cord Connection This LCD TV uses nominal input voltages of 220-240V AC. It is designed to work with single-phase power systems. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorised dealer or service station if you are not sure the type of power being supplied. Connect the LCD TV with all peripheral equipment before turning the LCD TV on. 1. Remove the battery compartment cover.
Remote Control 7 1 16 2 3 17 4 5 18 19 6 20 7 8 9 21 22 23 24 1 10 25 11 12 13 14 15 26 27 28 29 Standby On / Off switch TV On or Off standby. •2 Switches Numeric buttons channel and teletext pages. •3 Changes FAVORITE • Open the favourite channel list. Note: a channel into the favourite channel list: • Add −− When you enter a channel, press FAVORITE button to open the favourite channel list, then press OK to add the selected channel into the favourite channel list.
Turning On/Off LCD TV 1. Complete the peripheral connections before turning on LCD TV. 2. Connect LCD TV’s AC Power Cord into an AC outlet. 3. Press POWER button on Side Control of LCD TV or use Remote Control to turn it ON. The POWER indicator will light up (green). 4. Press POWER button again to enter stand-by status, the POWER indicator will become red. Note: If there is no reaction when you press (POWER) on the remote control, press (POWER) button on Side Control again to active the TV.
Initial Setup 1 Initial Setup Initial Setup Welcome to use the Wizard for Initial Setup !! Please press [OK] to start the wizard.
Initial Setup 4 Country Setting Initial Setup Country EXIT Please select your country: Austria Back Belgium Select Switzerland Next Czech Republic Germany Back Select Next Exit Exit 5 PIN Setting Initial Setup Please set PIN. “0000” is not a valid PIN New PIN Confirm PIN EXIT OK Next Exit Exit Next Note: PIN Setting screen is only for selected countries.
Initial Setup 6 Tuner Mode Setting Initial Setup Tuner Mode EXIT Please select your tuner mode: Aerial Back Cable Select Next Back Select Next Exit Exit Note: When selecting Aerial, go to step 9 to start channel scan. When selecting Cable, the Scan Mode configuration screen will appear. • • 7 Select Operator Initial Setup Select Operator EXIT You can select only one operator from the following list.
Initial Setup 9 Channel Scan Initial Setup Channel Scan EXIT First, please connect aerial. Start channel scan now ? If you skip this step, the channel scan could be performed in Menu. Back Scan Skip Scan Back Select Select Next Next Exit Exit 10 Search for channels Initial Setup Channel Scan Cancel The channel scan may take a while to complete. Status: Scanning...
On-Screen Display Colour or decreases the levels of colour according to your • Increases personal preference. (0~100) Picture Main Menu Viewing Mode 90 50 50 50 0 Brightness Colour Sharpness Tint Colour Balance Access Select • Normal Contrast Normal P-NR On 3D-COMB On Screen Display On EXIT RETURN 1. Press MENU button and ab buttons to select “Picture”, the Picture menu will be displayed. 2. Press OK button to enter Picture menu. 3. Press ab buttons to select item desired. 4.
DVI Input Settings Surround the black level in the image for HDMI input mode • Changes with DVI input signal manually. • Enriches (expanding and deepening) the sound quality. • For HDMI terminal with DVI input signal only. MPX 3:2 Pulldown detects a film-based source (originally Selects multiplex mode (if available). • Automatically • For analogue modesound encoded at 24 frames/second), analyses it then recreates only. • each file frame for high-definition picture quality.
Timer Setup Main Menu Main Menu Off Timer Auto Standby Off Tuning Menu Language 4 hours Display Settings Common Interface HDMI Control On System Menu Child Lock Other Settings Access Select EXIT Access Select RETURN 1. Press MENU button and ab buttons to select “Timer”, the Timer menu will be displayed. 2. Press OK button to enter Timer menu. 3. Press ab buttons to select item desired. 4. Press cd buttons to adjust value. 5. Press BACK/RETURN button to return the previous menu. 6.
Analogue Manual Scan and stores analogue TV channels manually. • Searches • For TV mode only. Note: TV will store scanned channels, even if the scanning for channels have not completed. Favourite Network Select • For Norway only. Channel Skip one or more channels when using remote control to • Skips switch between channels. Channel Sort • Reorders the channels in the programme list. Channel Edit • Edits the channel number or the channel name.
Media Player Child Lock a channel / AV input to prevent access to it. • Locks the locked channel / input is selected, a message • When appears; you need to enter the PIN number to watch the Media Player restricted content. PIN need to enter the PIN when you access locked channel • You or inputs. Contents Select Channel Block • Prevents children from watching certain channels. Time Interval Lock • For Norway only.
Music Buttons Blue Yellow (Information) a/b/c/d Option List Description Opens option menu. Selects Photo, Music, or Movie. Display file information. Selects musics. Rewind the selected music. • • • • • • Play or pause the selected music. the selected music and • Stop return to the thumbnail music index. • Fast forward the selected music. Movie Buttons Blue Yellow (Information) a/b/c/d multi- media menu, you can press Blue colour key to • Inselect one of following options.
TROUBLESHOOTING Before calling your dealer or service centre for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment. 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3. Verify that all power is switched on. 4. If LCD TV still does not produce an image, re-start the external equipment. 5. If the image still does not appear, unplug LCD TV from the external equipment and check the external equipment.
SPECIFICATIONS TX-L32C5E TX-L42U5E Power Source AC 220-240 V, 50Hz Energy efficiency class C C 74 W 124 W 108 kWh 181 kWh 105 W 181 W 0.3 W 0.3 W Dimensions (W × H × D) With Pedestal: 779 mm × 547 mm × 230 mm Without Pedestal (TV only): 779 mm × 495 mm × 128 mm With Pedestal: 1,012 mm × 677 mm × 270 mm Without Pedestal (TV only): 1,012 mm × 626 mm × 123 mm Mass With Pedestal: 10.5 kg Without Pedestal (TV only): 9.5 kg With Pedestal: 15.5 kg Without Pedestal (TV only): 13.
Input Signal Compatibility Chart COMPONENT (Y, PB, PR), HDMI Signal name 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p COMPONENT HDMI Mark : Applicable input signal PC (from D-sub terminal/ HDMI terminal) Signal name 640 × 400 @70 Hz 640 × 480 @60 Hz 640 × 480 @75 Hz 800 × 600 @60 Hz 800 × 600 @75 Hz 800 × 600 @85 Hz 1,024 × 768 @60 Hz 1,024 × 768 @70 Hz 1,024 × 768 @75 Hz 1,024 × 768 @85 Hz 1,280 × 768 @60 Hz 1,280 × 1,024 @60 Hz 1
Multi-media Supported Specification Photo Format JPEG File extension Image resolution (pixel) .
LICENSE This product incorporates the following software or technology: (1) the software based in part on the work of the Independent JPEG Group, (2) the software developed by the Free Type Project. Dolby under license from Dolby Laboratories. Dolby and the double-D symbol are • Manufactured trademarks of Dolby Laboratories. HDMI the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered • HDMI, trademarks of HDMI Licensing LLC in United States and other countries.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
