Operating Instructions

How to Use Menu Functions
37
Menu Item Adjustments / Configurations (alternatives)
Setup
Link Settings
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 77)

This function is available when [VIERA Link] is set to [On].
Download
Downloads channel, language and country / region settings to Q-Link or
VIERA Link compatible equipment connected to the TV

DVB-C channel setting cannot be downloaded.
Child Lock Applies access control for channels or inputs to prevent unwanted access (p. 49)
Tuning Menu

Favourites Edit
Creates a list of favourite channels (p. 42)

Not valid on Analogue mode
Channel List Skips the unwanted channels or edits channels (p. 43)
Auto Setup Automatically searches for the receivable channels (p. 40 - 41)
Manual Tuning Searches for the channels manually (p. 44)
Update Channel
List
Updates the channel list while keeping your settings (p. 45)

For DVB mode
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries)

For DVB mode
New Channel
Message
Selects whether to give a notification message when a new channel is found
[Off] / [On] (p. 45)

For DVB mode
Service
Replacement
Set to [On] to enable a message to switch to the available service (only available
in some countries) [Off] / [On]

For DVB-C mode
Signal Condition
Checks the signal condition (p. 45)

Not valid on Analogue mode
Attenuator
Automatically reduces the DVB-C signal to avoid the interference [Off] / [On]

If the DVB-C signal is too strong, the interference may occur. In this case set to
[On] to reduce the signal automatically.
Add TV Signal
Adds the TV mode

This function is available if you skip any modes to tune in [Auto Setup] for first
using the TV.

To operate, refer to the “Auto Setup” operations for first using the TV (p. 14).