Operating Instructions LCD Television Model No. TX-L37G15B Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only. U.K.
Features ■ freesat HD tuner built-in Receives freesat - free digital satellite broadcasts in the UK This TV has a built-in freesat HD tuner. freesat is a brand new free digital TV service which broadcasts via satellite so you can receive TV, radio, interactive TV, and HD TV with crystal clear reception. You can enjoy sharp pictures, vivid colours, multi-channel sound, and various services with the interactive content.
■ FULL HD This TV uses a high definition panel to produce high definition pictures close to their original resolution. Contents Be Sure to Read ●Safety Precautions ············································ 4 ■ HD TV 1080p This TV supports high definition TV signals. Possible to decode Dolby Digital Plus audio track (multi-channel sound) and output as Dolby Digital multi-channel sound signal from DIGITAL AUDIO OUT terminal. ■ SDHC Card This TV supports SDHC Card.
Safety Precautions Warning & Caution Handling the mains plug and lead Power source ● This TV is designed to operate on 220-240 V, 50 / 60 Hz AC. ● Ensure that the mains plug is easily accessible at all times. The On / Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time.
Notes ■ Auto power standby function ● If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode. Do not expose to rain or excessive moisture ■ Keep the TV away from these types of equipment ● Electronic equipment ● To prevent damage which might result in electric shock or fire, do not expose this TV to rain or excessive moisture.
Accessories / Options Standard accessories □ Remote Control ● N2QAYB000353 Check that you have the accessories and items shown □ Batteries for the □ Clamper ● TMM8E18048 Remote Control (2) ● R6 (UM3) abc □ Cleaning cloth ● TXFPE01RLTB p. 8 def ghi jkl mno pqrs tuv wxyz □ Operating Instructions □ Pan European Guarantee Card □ CRM □ Pedestal □ Assembly screw ● TBLA0410 for Pedestal (4) ● XYM4+C10FJK p.
Attaching the pedestal Warning Do not disassemble or modify the pedestal. ● Otherwise the TV may fall over and become damaged, and personal injury may result. Caution Use the assembly screws to fasten securely. ● Make sure that the screws are securely tightened. ● Carry out the work on a horizontal and level surface. Holes for pedestal installation Arrow mark ●Accessories / Options ■ Securing the TV Quick Start Guide Do not use any other TV and displays.
Accessories / Options Using the clamper To tighten: To loosen: Keep the knob pressed Rear of the TV ● Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image). ● Fix cables with clampers as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables. Identifying Controls Function select TV ● Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 34 and p.
Identifying Controls Remote Control VIERA IMAGE VIEWER (p. 60) ● Switches to SD Card viewing mode Input mode selection Standby On / Off switch ● AV - switches to AV input mode from Input ● TV - switches freesat / DVB / Analogue / Other Sat. mode (p. 15) ● Switches TV On or Off standby Selection list (p. 24) ● Changes aspect ratio from Aspect Selection list ● Also possible by pressing this button repeatedly until you reach the desired aspect Direct TV Recording (p. 66 and p.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 2 Connecting DVD Recorder / VCR TV, DVD Recorder or VCR Example 3 Connecting DVD Recorder / VCR and Cable TV box TV, DVD Recorder / VCR and Cable Rear of the TV Rear of the TV AC 220-240 V 50 / 60 Hz Terrestrial aerial AC 220-240 V 50 / 60 Hz Aerial input terminal Mains lead Fully wired HDMI compliant cable HDMI 1 HDMI 3 HDMI 1 HDMI 3 HDMI 2 DIGITAL AUDIO OUT HDMI 2 DIGITAL AUDIO OUT ●Basic Connection Aerial input terminal Mains lead Quick Start Guide Terrestrial aerial Y PC L L
Auto Setup Search and store TV channels automatically. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu.
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. ● For “VIERA Link Control”, “Pause Live TV” and “Media Server” functions to operate correctly, ensure the connections and settings are completed. VIERA Link Control / Pause Live TV: “Summary of Q-Link and VIERA Link features” (p. 64 and p. 65), “Preparations” (p. 67) After connection, turn the equipment on and then switch the TV on. Media Server: “Network connections” (p. 53), “Network Setup” (p.
Watching TV INPUT TV ASPECT MENU N 1 Turn power on 2 Select the mode (freesat, DVB, Analogue or Other Sat.) (Press for about 1 second) ● Mains power On / Off switch should be On. (p. 8) watch TV Selection EXIT freesat TV TO VIERA OLS select DVB Analogue Displayed if Other Satellite channels are tuned (p. 43) ● Also possible by pressing the TV button repeatedly on the remote control or side panel of the TV. (p. 8) Other Sat.
Watching TV Display Information banner Display Information banner ● Also appears when changing a channel Channel position Channel type and name (if it is Radio or Data channel) Current time Example (freesat): TV mode Programme FS 103 ITV Wales Radio Coronation Street 19 : 30 - 20 : 00 Now Mute Programme Start / Finish time blue Example (DVB): Radio Coronation Street 19 : 30 - 20 : 00 Now Mute AD Encrypted 19:35 All DVB Channels Select favourites For info press Subtitles TXT Multi Audio 45
Aspect ASPECT Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. Normally programmes have the Aspect Control Signal (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the Aspect Control Signal (p. 74).
Using TV Guide TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). ● When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before the TV Guide is completely shown.
DVB or Analogue mode ● This TV supports the GUIDE Plus+ system in DVB or Analogue mode. ● The Gemstar branding partner will supply the rating informations in the programme information and the recommended group in the Prog.Type list. ● Analogue channels will be listed after DVB channels but there will be no programme listings. “D” means DVB channel and “A” means Analogue channel.
Using TV Guide ■ Other useful functions (Operate whilst viewing TV Guide) Watch the programme Select the current programme or channel Select “View” (freesat or DVB mode) Eastender 19:30- 20:00 select View select watch access Timer Programming ● Timer Programming see below (TV screen) View details of the programme (freesat or DVB mode) Select the programme View details ■ To return to TV Guide: Landscape Wed 24/10/2007 10:46 select Wednesday, 24 October 2007 DIY SOS BBC ONE 20:00 - 20:30, 30 min
Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) ● The availability of teletext services for a programme is indicated by “TXT” in the information banner. Information banner (p.
Viewing Teletext Analogue teletext Analogue teletext services Analogue teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
INDEX Return to the main index page INDEX Subtitles View a favourite page stored ● Factory setting is “P888” (subtitle service) on the blue button (List mode). STTL View in multi window Watch TV and Teletext in two windows at once ● Operations can be made only in Teletext screen. ● Each time pressed: Teletext TV and Teletext TEXT TV Store frequently viewed pages Store frequently viewed pages in the colour bar (List mode only) As page is displayed do not change number on blue button.
Watching External inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. ● To connect the equipment p. 11 and p. 72 The Remote Control is capable of operating some functions of selected external equipment. 1 Turn the TV on ■ When connecting with SCART as example 2 or 3 (p. 11) Receives input signals automatically when playback starts ● Input signals are automatically identified by the SCART (pin 8) terminal.
Screen display Terminal Manual input ( default setting in “Input Labels” Auto input ) mode or (EC VIERA Link ) AV1 AV2 AV1 AV1-RGB AV2 AV2-S-Video AV2-RGB COMPONENT PC AV3 AV3 COMPONENT AV3-S-Video EC/AV2 EC/AV1 EC/AV2-S-Video EC/AV1-RGB EC/AV2-RGB ― ― PC ― HDMI1 HDMI2 HDMI3 HDMI4 HDMI1 HDMI2 HDMI3 HDMI4 EC/HDMI1 EC/HDMI2 EC/HDMI3 EC/HDMI4 EC mode and VIERA Link for VIERA Link for VIERA Link for VIERA Link ● Applicable for ● Applicable ● Applicable ● Applicable ● If the ab
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions.
■ Overview (Picture, Sound) ● How to operate p. 26 Main Menu Picture Sound Setup Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management Eco Mode 1/2 Dynamic Picture Menu P-NR 3D-COMB Advanced PC Settings Reset to Defaults Available in NTSC Warm Off Off Not available in PC 2/2 Off Off Access Reset (p. 30) Not available in PC Available in NTSC / PAL Available in PC Advanced PC Settings R-Gain G-Gain B-Gain Gamma Reset to Defaults 2.
How to Use Menu Functions Available in PC ■ Overview (Setup) ● How to operate PC Setup Input Resolution Clock H-pos V-pos Clock Phase Sync Reset to Defaults p. 26 Main Menu Picture 1024 × 768 H&V Reset (p. 63) Sound Link Settings Setup VIERA Link Q-Link AV2 out Standby Power Save Intelligent Auto Standby Q-Link Download Network Setup DivX® VOD Setup Menu PC Setup Timer Programming Off Timer Link Settings Child Lock freesat Tuning Menu DVB Tuning Menu Analogue Tuning Menu Other Sat.
Sending Preset Data Please wait! 0% Child Lock 100% Change PIN Child Lock List Remote control unavailable Access Access Child Lock List - TV and AV (p. 32) Network Setup Menu Connect to Network Acquire IP Address IP Address Subnet Mask Gateway Acquire DNS Address Primary DNS Secondary DNS 1/2 Access Auto . . . Auto . . . . . . .
How to Use Menu Functions ■ Menu list Menu Picture 30 Item Adjustments / Configurations (alternatives) Viewing Mode Selects four different screen settings (Dynamic / Normal / Cinema / Game) In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance, Colour Management, Eco Mode and 3D-COMB can be adjusted and stored to suit your particular viewing requirement (e.g., you may require different settings for viewing sports, films, news etc.
Menu Item Adjustments / Configurations (alternatives) Increases or decreases level to enhance or minimise lower, deeper sound output Treble Increases or decreases level to enhance or minimise sharper, higher sound output Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings (Off / V-Audio / V-Audio Surround / V-Audio ProSurround) V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effec
How to Use Menu Functions ■ Menu list Menu Item Timer Programming Off Timer VIERA Link Q-Link Link Settings AV1 / AV2 out Standby Power Save Intelligent Auto Standby Q-Link Download Network Setup DivX® VOD Child Lock freesat Tuning Menu DVB Tuning Menu Setup Analogue Tuning Menu Other Sat. Tuning Menu 32 Adjustments / Configurations (alternatives) Records forthcoming channels (p.
Menu Item Adjustments / Configurations (alternatives) Display Settings Teletext Analogue teletext display mode (FASTEXT / List) (p. 22) Preferred Subtitles Selects the preferred language for digital channel subtitles (depending on the broadcaster) ● To display subtitles p. 16 Input Labels Banner Display Timeout Labels or skips each input terminal (p. 46) Sets how long the Information banner (p.
Retuning from Setup Menu Auto Setup retunes all channels automatically. freesat channels Automatically retune all the freesat channels received in the area. ● Only freesat channels are retuned. ● All the previous tuning settings are erased. ● If a Child Lock PIN number (p. 45) has been set, it must be entered. INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT 1 Select freesat 2 Display the menu 3 Select “Setup” p.
DVB or Analogue channels Automatically retune all DVB or Analogue channels received in the area. ● Only DVB channels are retuned in DVB mode. ● Only Analogue channels are retuned in Analogue mode. ● All the previous tuning settings are erased. ● If a Child Lock PIN number (p. 45) has been set, it must be entered. INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT 1 Select DVB or Analogue 2 Display the menu p.
Tuning and Editing Channels (freesat) You can retune channels or make your favourite channel list, skip unwanted channels, etc. INPUT TV MENU EXIT BACK/ RETURN 1 Select freesat 2 Display the menu 3 Select “Setup” p.
List favourite freesat channels Favourites Edit Create your favourite channel list from various broadcasters. The freesat Favourites list is available from “Channel Genre” in the TV Guide (p. 18).
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. INPUT TV MENU EXIT BACK/ RETURN 1 2 Select DVB 3 Select “Setup” p.
List favourite DVB channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The DVB Favourites lists are available for switching in the Information banner (p. 16) and from “Category” in the TV Guide (p. 19).
Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. INPUT TV MENU EXIT BACK/ RETURN 1 Select Analogue 2 Display the menu 3 Select “Setup” p.
Skip unwanted Analogue channels, Edit Analogue channels Channel List You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Tuning and Editing Channels (Other Sat.) You can tune all receivable digital satellite channels or skip unwanted channels, etc. ● Some of Other Sat. functions may work to differing specifications (depending on the broadcasters). Select freesat or Other Sat. 1 p. 15 TV INPUT TV MENU EXIT BACK/ RETURN 2 Display the menu 3 Select “Setup” MENU access Main Menu Picture Sound select Setup abc def ghi jkl mno pqrs tuv wxyz 4 Select “Other Sat.
Set all receivable digital satellite channels Auto Setup Any receivable digital compliant satellite channels can be tuned. ● Only Other Sat. channels are retuned. ● All the previous tuning settings are erased. ● If a Child Lock PIN number (p. 45) has been set, it must be entered. Select the satellite ● Selectable satellites are Astra2/Eurobird, Astra1 and Other Satellite Auto Setup - Satellite Selection • Astra2/Eurobird • Astra1, Hotbird p.
Tuning and Editing Channels (Other Sat.) List favourite Other Sat. channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The Other Sat. Favourites lists are available for switching in the Information banner (p. 16). Select a channel to list Other Sat. Favourites Editor Favourites1 All Other Sat.
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. 1 Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture Sound select Setup abc 3 def ghi jkl mno pqrs tuv wxyz Select “Child Lock” 4 ■ To return to TV access Setup Menu Timer Programming Off Timer Off Link Settings Child Lock Access freesat Tuning Menu Other Sat.
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. ● To select the input mode MENU EXIT p. 24 1 Display the menu 2 Select “Setup” MENU access Main Menu Picture Sound select Setup BACK/ RETURN 3 4 5 Select “Display Settings” access Setup Menu Timer Programming Off Timer Off Link Settings Child Lock freesat Tuning Menu Other Sat.
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings other than “Owner ID” are reset (channels, picture, sound settings, etc.). 1 MENU Display the menu MENU EXIT 2 Select “Setup” access Main Menu Picture Sound select Setup 3 access Setup Menu Timer Programming Off Timer Off Link Settings Child Lock freesat Tuning Menu Other Sat.
Advanced Settings Advanced Settings provide various features. INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT TO VIERA OLS IDE GU BACK/ RETURN OPTION 1 Select freesat, DVB, Analogue or Other Sat. 2 Display the menu 3 Select “Setup” p. 15 TV MENU access Main Menu Picture Sound TEXT STTL INDEX HOLD select Setup abc def ghi jkl mno pqrs tuv wxyz REC 4 Select “System Menu” access Setup Menu Timer Programming Off Timer Off Link Settings Child Lock freesat Tuning Menu Other Sat.
Input owner ID Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft it will help the Police to determine the owner. Enter the PIN number (4 digits) Owner ID Please enter new PIN PIN abc def ghi jkl mno pqrs tuv wxyz ● Enter the PIN number twice at first setting. ● Make a note of the PIN number in case you forget it.
Recording Controls Timer Programming from Menu The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the TV will switch on and tune to the correct channel (even if the TV is in Standby mode). TV Guide may also be used to set timer programming. (p. 20) ● If the recorder is compatible with Q-Link or similar technologies (p. 66), and setup / connection are done completely (p. 64 and p.
Set timer programming details Timer Programming Start making the settings Repeat the operations as below, and set items in the order of ● set , and to can also be entered with numeric buttons. select the item FS: freesat Timer recording D: DVB Records according to the time setting A: Analogue Guide: Guide link recording S: Other Sat. Records according to the TV Guide signal (p. 20) (you cannot change TV mode within the menu) S/P: Split Programme (p.
Using Network Services (DLNA / VIERA CAST / freesat) DLNA® This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. It allows you to share photos and movies stored in the DLNA Certified media server (for example, PC, etc.) connected to your home network, and enjoy watching them on the TV screen.
Network connections ● If you do not have a Broadband network services, please consult your retailer for assistance. ● Confirm the terms and conditions of the contracts with your Internet Service Provider (ISP) or telecommunications company. ● Use the Shielded Twist Pair (STP) LAN cable to connect the TV to the network equipment. ● Set up and connect any equipment required for the network environment. ● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively.
Using Network Services (DLNA / VIERA CAST / freesat) Network Setup ● Ensure the connections are completed before starting Network Setup. “Network connections” (p. 53) MENU 1 Display the menu 2 Select “Setup” MENU EXIT access Main Menu Picture Sound BACK/ RETURN 3 abc def ghi jkl mno pqrs tuv wxyz Select “Link Settings” access Setup Menu Timer Programming Off Timer Off Link Settings Access Child Lock freesat Tuning Menu Other Sat.
Network Settings Set the network setting items ■ Acquire IP Address ■ Acquire DNS Address If you make the network connection like “Example 2” (p. 53), you do not have to set “Acquire DNS Address”, “Proxy” and “Proxy Port”. Sets IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS. For most users, the recommended method of connection to your network is by using Auto feature.
Using Network Services (DLNA / VIERA CAST / freesat) Using DLNA® features ● Ensure the preparation of media server, network connections and network settings are completed. “Media server” (p. 52), “Network connections” (p. 53), “Network Setup” (p. 54 and p.
Slideshow (for photo contents) ■ Start Slideshow (operate in step ) Select the photo for the first view Start Slideshow red ● To pause ● To return to Single view green Note ● Slideshow is done for all available photo contents.
Using Network Services (DLNA / VIERA CAST / freesat) DivX® VOD ABOUT DIVX VIDEO-ON-DEMAND: This DivX® Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. First generate the DivX VOD registration code for your device and submit it during the registration process. [Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices.
VIERA CAST™ You can access a selection of internet services from VIERA CAST home screen. For example, YouTube, Picasa Web Albums (current as of April, 2009). ● VIERA CAST requires a broadband internet connection. Dial-up internet connections cannot be used. ● Ensure the network connections and network settings are completed. “Network connections” (p. 53), “Network Setup” (p. 54 and p. 55) EXIT Access VIERA CAST ● Depending on the usage conditions, Example: it may take a while to read all the data.
Viewing from SD Card (VIERA IMAGE VIEWER) Photo View : Still images recorded by digital cameras will be displayed. Movie View : Moving pictures recorded by digital video cameras will be played back. ● During the operation, sound signal is output from AV1, AV2, AUDIO OUT and DIGITAL AUDIO OUT terminals. But no video signals are output. ● “Date” shows the date on which the recording was made by the digital camera or digital video camera. The file without record of the date is shown “**/**/****”. p.
Slideshow ■ Start Slideshow (operate in step ) Select the photo for the first view Start Slideshow ● To pause ● To return to Single view green Note ● Slideshow is done within the thumbnail. ● You can also start slideshow directly by using VIERA TOOLS “How to Use VIERA TOOLS” (p.
Viewing from SD Card (VIERA IMAGE VIEWER) Movie View 1 2 Insert the SD Card access Select “Movie View” SD Card select Photo View ASPECT MENU N ● You can also access directly by using Movie View INPUT TV AV VIERA TOOLS “How to Use VIERA TOOLS” (p.
Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. ● To connect PC p. 72 ASPECT MENU N DIRECT TV REC 1 Select the external input 2 Select “PC” AV EXIT TO VIERA OLS IDE GU BACK/ RETURN OPTION access Input Selection AV1 AV2/S AV3/S COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 TV Media Server TEXT STTL INDEX HOLD ■ To return to TV select ● Corresponding signals p. 79 ● If “H-freq.
Link Functions (Q-Link VIERA Link) Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 66) VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control, convenient recording, playback, energy saving, creating home theatre, etc., without complicated setting. (p. 67 - 71) You can use Q-Link and VIERA Link functions together. ● This TV supports “HDAVI Control 4” function.
■ VIERA Link (HDMI and Audio out connections) Connected equipment Features Analogue channel download Easy playback Power on link Power off link Reduce unnecessary power consumption in standby Auto standby for unnecessary equipment Pause Live TV programme Direct TV Recording Control the menu of the connected equipment by VIERA remote control Speaker control Player theatre with VIERA Link function Blu-ray Disc theatre with VIERA Link function Amplifier with VIERA Link function – – ∗5 – – – ∗3 – – –
Link Functions (Q-Link VIERA Link) Q-Link ■ Preparations ●Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” ●Q-Link connection p. 64 ●Use fully wired SCART cable. ●Set up the DVD Recorder / VCR. Read the manual of the recorder. ●Q-Link terminal setup in the Setup Menu “Q-Link” (p. 32), “AV1 / AV2 out” (p.
VIERA Link “ Control™”∗ ∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 4” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 64 and p. 65). These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
Link Functions (Q-Link VIERA Link) ■ Features available Reduce unnecessary power consumption in standby Standby Power Save Set Standby Power Save “On” in the Setup Menu to use this function “Standby Power Save” (p. 32) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.
■ Features available (Using VIERA Link Menu) Pause Live TV programme Pause Live TV You can pause the live TV programme and resume later. Live TV programme will be recorded on HDD of the connected DIGA Recorder. ● This function is available with DIGA Recorder which has HDD. ● If you connect a variety of recorders including other manufacturers’ recorders at the same time, please connect DIGA Recorder which has HDD to the TV’s lower HDMI terminal number.
Link Functions (Q-Link VIERA Link) ■ Features available (Using VIERA Link Menu) Control the menu of the connected equipment by VIERA remote control VIERA Link Control You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver). ● If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 64 and p. 65), “Preparations” (p.
■ Features available (Using VIERA Link Menu) Speaker control Speaker Selection You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). ● If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 64 and p. 65), “Preparations” (p.
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 87). To listen with speakers RCA cable or Network Amplifier with speaker system Optical digital audio cable Internet Hub or Router To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier.
Cable Satellite dish Rear of the TV To watch cable broadcasts Satellite cable Cable TV box S-V Fully wired HDMI compliant cable Terrestrial aerial (S-VIDEO) or (VIDEO) V (AUDIO) L R AV3 HDMI equipment Fully wired HDMI compliant cable DVD Recorder RF cable Fully wired SCART cable Fully wired SCART cable HDMI 4 To record / playback DVD Recorder / VCR Camcorder / HDMI equipment (M3 stereo mini plug) Fully wired HDMI compliant cable or To adjust volume “Headphone Volume” in the Sound Me
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 17) ■ Aspect Control Signal “WIDE” will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode.
Updating the TV software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. ■ To download from a notification banner A notification banner will appear when you search for a new version software by using the “System Update Search Now” function (p. 48). Found new software version .
Technical Information DivX ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. ® ■ DivX video file Extension - “.divx” or “.avi” Image resolution - Up to 720 × 576 pixels ● Plays versions of DivX 3, 4, 5 and 6 video with standard playback of DivX media files. ● Certified to the DivX Home Theater Profile.
SD Card ■ Cautions in handling SD Card ● Do not remove the card while the TV is accessing data (this can damage card or TV). ● Do not touch the pins on the back of the card. ● Do not subject the card to a high pressure or impact. ● Insert the card in the correct direction (otherwise, card may be damaged). ● Electrical interference, static electricity, or erroneous operation may damage the data or card.
Technical Information HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Input signal that can be displayed COMPONENT (Y, PB, PR), HDMI ∗ Mark: Applicable input signal Signal name 525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i 1,125 (1,080) / 60p 1,125 (1,080) / 50p 1,125 (1,080) / 24p PC (from D-sub 15P) Signal name 640 × 400 @70 Hz 640 × 480 @60 Hz 640 × 480 @75 Hz 800 × 600 @60 Hz 800 × 600 @75 Hz 800 × 600 @85 Hz 852 × 480 @60 Hz 1,024 × 768 @60 Hz 1,024 × 768 @70 Hz 1,024 × 768 @75 Hz
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. For details (p. 88) White spots or shadow images (noise) ● Check the position, direction, and connection of the aerial. freesat Auto Setup cannot be done completely ● Check connections and dish alignment. The dish needs to be pointing at Astra 2 at 28.
Problem Chaotic image, noisy Screen No image can be displayed Blurry or distorted image (no sound or low volume) Unusual image is displayed Sound No sound is produced Sound level is low or sound is distorted Actions ● Set “P-NR” in the Picture Menu (to remove noise). (p. 30) ● Check nearby electrical products (fluorescent lamp, DECT phones, mobile phones, microwave, etc.). ● Is “Colour” or “Contrast” in the Picture Menu set to the minimum? (p.
FAQs Problem Actions ● Set the sound setting of the connected equipment to Sound is unusual “2ch L.PCM”. HDMI ● Check the “HDMI1 / 4 Input” setting in the Sound Menu. (p. 31) ● If digital sound connection has a problem, select analogue sound connection. (p. 78) Pictures from external equipment are unusual when the equipment is connected via HDMI ● Check the HDMI cable is connected properly. (p. 72) ● Turn the connected equipment on and then switch the TV on. (p.
On screen messages Message Meaning / Action All tuning data will be erased Are you sure ? Are you sure you want to delete this timer ? Press OK to delete timer Press RETURN to return ● “Shipping Condition” will erase all tuning data (p. 47). ● Confirm correct operation. ● Confirm correct operation. ● The signal is weak. Check the aerial is plugged in properly. It may be necessary to have an aerial installer check the signal and aerial alignment. ● Reset channels. (p. 34 and p.
On screen messages Message Meaning / Action PIN incorrect! ● The PIN number you entered is wrong. Please check settings and connections on HDMI devices. ● Communication error in VIERA Link function (p. 67). Please enter a frequency between 10700 and 12750 MHz ● The frequency you entered is out of range. Consult the received satellite Please wait. ● A function is in progress. Recording this channel now ● The recorder is recording the programme from its own tuner.
Message Meaning / Action ■ Network An internal error occured. ● Check the settings. (p. 54 and p. 55) Cannot read file ● The file is broken or unreadable. Communication with the server failed. ● This might be a problem of the media server. Connection to the server failed. ● Check the connections and settings. (p. 53 - 55) Server not found ● There are no available media server on your home network. The software update is not completed. ● Network download failed. Check applicable data format.
Glossary ■ DLNA Digital Living Network Alliance ■ DVB Digital Video Broadcasting ■ DVD Digital Versatile Disc ■ DVI Digital Visual Interface ■ EPG Electronic Programme Guide ■ HDMI High-Definition Multimedia Interface ■ MAC Address ■ NTSC ■ SCART ■ RF ■ Shop viewing environment National Television System Committee One of the television signals used in USA, etc.
Specifications Display panel Power Source Power Consumption Power Consumption in Standby mode Aspect Ratio Visible screen size Sound Number of pixels Speaker Audio Output Headphones PC signals AC 220-240 V, 50 / 60 Hz 165 W 0.3 W (Without monitor out recording) 32 W (With monitor out recording) 16:9 94 cm (diagonal) 819 mm (W) × 460 mm (H) 2,073,600 (1,920 (W) × 1,080 (H)) 160 mm × 42 mm × 2 pcs, 8 Ω 20 W (10 W + 10 W), 10% THD M3 (3.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
