Model No. TX-L32DT30E TX-L37DT30E Operating Instructions LCD Television Contents Be Sure to Read Safety Precautions······················································2 Maintenance ································································3 For more detailed instructions, refer to the Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 8.
Safety Precautions Warning Handling the mains plug and lead the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) • Insert that the mains plug is easily accessible. • Ensure not touch the mains plug with a wet hand. This may cause electrical shock. • Do the mains lead, damaged lead may cause fire or electrical shock. • Do• Donotnotdamage move the TV with the lead plugged into a socket outlet.
Caution When cleaning the TV, remove the mains plug Do not block the rear air vents • Cleaning an energized TV may cause electric shock. Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time TV will still consume some power even in the Off mode, • This as long as the mains plug is still connected. Do not expose your ears to excessive volume from the headphones • Irreversible damage can be caused.
Attaching the pedestal Warning Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result. • Caution Do not use any pedestal other than the one provided with this TV. Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal while it is physically damaged, personal injury may result.
Identifying Controls Remote Control 1 Standby On / Off switch MENU ASPECT DIRECT TV REC EXIT VIERA Lin k TO VIERA OLS IDE GU 1 2 3 4 5 6 7 INPUT TV AV 8 BACK/ RETURN OPTION • Switches TV On or Off standby 2 3D button to the viewing mode • Switches between 2D and 3D 15 16 17 18 to access Picture, Sound, • Press Timer and Setup Menus 19 10 11 12 abc def ghi jkl mno pqrs tuv wxyz • Changes aspect ratio channel and • Displays programme information 20 23 24 6 VIERA TOOLS 18 Exit 7 [VIE
TV 8 Changes the input mode 9 Remote control signal receiver F 1 not place any objects between the TV remote • Do control signal receiver and remote control. 6 7 2 10 C.A.T.S. (Contrast Automatic Tracking System) sensor Senses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On] (p.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. There are some restrictions on placement for viewing 3D images. For details (p. 14, 16) Example 1 Connecting dish or aerial Example 2 Connecting DVD Recorder / VCR TV only TV, DVD Recorder or VCR To ensure your satellite dish is correctly installed, please consult your local dealer.
Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Terrestrial aerial Rear of the TV RF cable AC 220-240 V 50 / 60 Hz Fully wired HDMI compliant cable Fully wired SCART cable Fully wired SCART cable Mains lead Cable Set top box Basic Connection DVD Recorder or VCR RF cable RF IN RF OUT ■ Connecting to the network environment (Network connections) To enable the network service functions (VIERA Connect, etc.
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 7, 8) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
5 3 [DVB-S Auto Setup] 4 [DVB-C Network Settings] DVB-S Auto Setup Checking LNB2 Satellite Progress 0% on the country you select, select your cable provider • Depending beforehand by following the on screen instructions. DVB-C Network Settings This will take about 30 minutes. No.
6 ■ [Wireless] Select the connection type select Connection Type Please select network connection type. access Search for access point WPS(Push button) [Search for access point] Access points found automatically are listed. 1. Select your desired access point select Available Access Points No. 1 2 3 Wireless type 11n(2.
[WPS(Push button)] 1. Press the WPS button on the access point until the light flashes 2. Connect the Wireless LAN Adaptor and the access point 6 WPS(Push button) 1) Please press the ‘WPS’ button on the access point until its light flashes. 2) When the light is flashing select ‘Connect’ on TV. If you are unsure, please check the instruction manual of the access point. Connect that your access point supports WPS for this setup.
Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen. This TV has no full browser function and all features of websites may not be available. • 1 Turn power on for about 1 second • Press • Mains power On / Off switch should be On. (p.
Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats. ∗1 : The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back ∗2, ∗3 : Other available 3D formats How to view the 3D images (p.
To view the 3D images You can enjoy the 3D images in a variety of ways. (Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.) ■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format) the 3D-compatible player via a fully wired HDMI compliant cable. • Connect mode is not switched automatically, select the input mode connected to the player. • IfIf input • you use the non 3D-compatible player, the images will be displayed on 2D mode.
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions.
Menu list Menu Item Picture How to Use Menu Functions Viewing Mode Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] / [Photo] / [Professional1] / [Professional2] In each Viewing Mode and input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement.
Menu Item Adjustments / Configurations (alternatives) Automatically compensates the picture frame rate and removes juddering movements to make the images smooth [Off] / [Mid] / [Max] 24p Smooth Film Automatically compensates the picture frame rate to make the 24p source movie images smooth [Off] / [Mid] / [Max] 3D Refresh Rate Reduces juddering noises of the 3D images [Auto] / [100Hz] Film Cadence Detection Automatically makes the film source movie images clear [Off] / [On] Resolution Enhancer En
Menu Sound Timer How to Use Menu Functions Adjustments / Configurations (alternatives) MPX Selects multiplex sound mode (if available) [Stereo] : Use this normally [Mono] : When stereo signal cannot be received [M1] / [M2] : Available while mono signal is transmitted Audio Preference Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG] [Auto] : Automatically selects the audio tracks if programme has more than two tracks.
Menu Item Child Lock Adjustments / Configurations (alternatives) Locks a channel / AV input to prevent access to it DVB-S Tuning Menu Favourites Edit Creates list of favourite DVB-S channels Channel List Skips the unwanted DVB-S channels or edits DVB-S channels Auto Setup Automatically sets the DVB-S channels received in the area Manual Tuning Sets the DVB-S channels manually Update Channel List Updates DVB-S Channel List while keeping your settings New Channel Message Selects whether to give
Menu Item Analogue Tuning Menu Language Channel List Skips the unwanted Analogue channels or edits Analogue channels Auto Setup Automatically sets the Analogue channels received in the area Manual Tuning Sets the Analogue channels manually Add TV Signal Adds the TV mode OSD Language Changes language for on screen displays Preferred Audio 1 / 2 Selects the first and second preferred language for DVB multi audio (depending on the broadcaster) Preferred Subtitles 1/2 Selects the first and second
Menu Item Adjustments / Configurations (alternatives) System Menu USB Keyboard Layout Selects the language that your USB Keyboard supports Shipping Condition Resets all settings, for example, when moving house System Update Downloads new software to this TV Software Licence Displays the software licence information System Information Displays the system information of this TV GUIDE Plus+ Settings Setup Update Performs the update of the GUIDE Plus+ schedule and advertising information for th
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
