Model No. English TX-65EZ1002B TX-77EZ1002B Operating Instructions OLED TV For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 23) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use. The images shown in this manual are for illustrative purposes only.
● For information about the trademarks, refer to [eHELP] (Search by Purpose > Read first > Before use > Licence). The illustration for TX-65EZ1002B is used in this manual unless otherwise mentioned. Illustrations shown may be different depending on the model.
Important Notice Do not display any still part of the image for a long period In such cases the still part of the image remains dimly on the screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. ● Typical still image parts: The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content.
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: ● Insert the mains plug fully into the mains socket. ● To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times. Warning ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands.
● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets. ● Do not apply any strong force or impact to the display panel. ● Ensure that children do not climb on the TV. ● Do not place the TV on sloping or unstable surfaces, and ensure that the TV does not hang over the edge of the base. Warning Never place a TV in an unstable location. A TV may fall, causing serious personal injury or death.
● Data transmitted and received over radio waves may be intercepted and monitored. ● The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference when using the built-in wireless LAN, keep the TV away from other devices that use 2.4 GHz and 5 GHz signals such as other wireless LAN devices, microwave ovens, and mobile phones. ● When problems occur due to static electricity, etc., the TV might stop operating to protect itself.
■ Battery for the Remote Control / Touch Pad Controller Accessories Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type. ● Do not mix old and new batteries. ● Do not mix different battery types (such as alkaline and manganese batteries). ● Do not use rechargeable batteries (Ni-Cd, etc.). ● Do not burn or break up batteries. ● Do not expose batteries to excessive heat such as sunshine, fire or the like.
Assembling / Removing the pedestal / speaker Cover Assembly screw (4) M5 × 10 Assembly screw (5) M4 × 12 Speaker Assembly screw M3 × 5 Base Speaker cable T FRON Bracket (L) Assembling the pedestal / speaker A 1 F R Bracket (R) D Cable cover (front) Cable cover (rear) 8 English E L
2 5 J ① ② 3 6 J G 7 4 C English 9
8 9 B ● When the TV is uneven horizontal, loosen the assembly screws to set the TV horizontal.
10 12 13 K H Removing the pedestal Be sure to remove the pedestal in the following procedures when you repack the TV. To disconnect the speaker and speaker cable Keep pushing the knob 1 Remove the cable cover (rear) from the pedestal. 2 Remove the cover from the pedestal. 3 Disconnect the speaker cable . 4 Remove the assembly screws from the TV. 5 Lift the TV from the pedestal. 6 Remove the cable cover (front) from the pedestal. 7 Remove the speaker cable from the pedestal.
Installing the TV and speaker Ensure that the TV and speaker do not hang over the edge of the base. Connections ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. ● Keep the TV away from electronic equipment (video equipment, etc.
Terminals Basic connections ■ Mains lead 1 AC 220-240 V 2 50 / 60 Hz Mains lead 10 11 3 Cable tie (Bundled the mains lead) To loosen: 4 5 Keep pushing the knob Knob 6 To remove from the TV: 7 Snaps 8 Keep pushing both side snaps 9 12 ■ Aerial 13 TV 1 Model name plate 2 CI slot (p. 16) 3 SD Card slot 4 HDMI1 - 2 (p. 14, 15, 16) 5 USB 1 port (p. 13) 6 Terrestrial terminal 7 Satellite terminal 8 AV (COMPONENT / VIDEO) 9 Headphone jack RF cable (p. 13) (p.
■ Single Tuner Network TV A broadband network environment is required to be able to use internet services. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first using the TV. (p. 22) Satellite cable ■ Wired connection Satellite dish ● To ensure your satellite dish is correctly installed, please consult your local dealer.
Connections for 4K compatible equipment TV Other connections ■ DVD Player (COMPONENT equipment) TV HDMI cable 4K compatible equipment ● To watch high-definition 4K more accurately or HDR content, connect the 4K compatible equipment to HDMI1 or 2 terminal. ● Connect the 4K compatible equipment to HDMI terminal using a 4K compatible cable and you can watch content in 4K format.
■ Amplifier (listening with external speakers) TV ● Use HDMI2 to connect the TV to an amplifier which has ARC (Audio Return Channel) function. If connecting to an amplifier without ARC function, use DIGITAL AUDIO. ● To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For information about the connections, read the manuals of the equipment and amplifier. TV CI module ■ USB HDD (for recording) ● Use USB 1 port for connecting the USB HDD.
Cable arrangement Before fixing the cables, remove the cover and cable cover (rear). Bundle the cables Set the tip in the hooks Hooks Fix the cables using the cable clamp and cable tie, and then attach the terminal cover to the TV.
● If all cables cannot pass the cable guide, fix the cables using the cable tie as follows. ■ Attaching the terminal cover ● Do not apply load to the terminal cover. ● Be careful not to nip the cables between the TV and the terminal cover. ● When using USB 2 port, USB 3 port, ETHERNET terminal, DIGITAL AUDIO, HDMI3 terminal or HDMI4 terminal, you cannot attach the terminal cover. Keep the removed cover for future use.
Identifying Controls Remote Control ● Press after selecting channel positions to quickly change channel. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 Netflix ● Accesses NETFLIX service directly. ● A broadband network environment is required in order to fully use this function. ● This service may be stopped or changed without notice. 9 Sound Mute On / Off 10 Text service button 11 Volume Up / Down 12 Numeric buttons ● Changes channel and teletext pages. ● Sets characters.
■ Installing / Removing batteries Pull open Hook Close Note the correct polarity (+ or -) 1 [ Touch Pad Controller The Touch Pad Controller is designed for convenient and intuitive operation, especially with [Home Screen] or internet content. ● Touch Pad Controller can be used exclusively for controlling this TV. ● Register the Touch Pad Controller to this TV with Bluetooth wireless technology before using.
■ Installing / Removing batteries 2 Ambient sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On]. Slide open 3 Power LED Red: Standby Green: On Orange: Standby with some functions (recording, etc.) active or panel maintenance in progress ● The LED blinks when the TV receives a command from the remote control. 4 Input mode selection ● Press repeatedly until you reach the desired mode.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 12 - 18) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 21) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
● To scroll the description (if more than 1 page) While the description is highlighted ● To open the reference screen ( ) ● To display the menu related to the description (only for some descriptions) (red) ● To check the features of this TV Search by Purpose > Read first > Features 24 English
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). It takes several seconds to display the image after turning the TV on ● When turning the TV on, the panel adjustment is performed. It is not a malfunction. The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p.
Maintenance First, remove the mains plug from the mains socket. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Specifications AUDIO L - R ■ TV Y Model No. PB/CB, PR/CR RCA PIN Type × 2 0.5 V[rms] 1.0 V[p-p] (including synchronisation) 65-inch model : TX-65EZ1002B ±0.35 V[p-p] 77-inch model : TX-77EZ1002B Dimensions (W × H × D) 65-inch model 1 452 mm × 918 mm × 330 mm (With Pedestal and speaker) 1 452 mm × 904 mm × 90 mm (With speaker (using “ACCESSORIES FOR SPEAKER WALL-HANGING”)) HDMI 1 / 2 / 3 / 4 input TYPE A Connectors HDMI1 / 3 / 4: 4K, Content Type, Deep Colour, x.v.
Bluetooth wireless technology*2 PAL I UHF E21 - 68 Standard Compliance Bluetooth 3.0 Frequency Range PAL I 2.402 GHz - 2.480 GHz VHF A - J CATV S1 - S20 UHF E21 - E69 CATV S21 - S41 (Hyperband) PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder M.NTSC Playback from M.
When using the wall-hanging bracket Bracket (R) Professional installation is required. The installation should never be done by any other than a qualified installation specialist. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. Any such damage will void your warranty.
Assembling procedure ● Please note the procedure to attach the speaker after hanging the TV on the wall. You cannot attach the speaker before hanging the TV.
6 3 To remove from the TV: Snaps Keep pushing both side snaps G H To attach the cable clamp: Insert the cable clamp in a hole 4 Hole A I G 5 A J English 31
7 Installing the wall-hanging bracket 8 Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
11 Attach the speaker 13 G 14 12 15 K I English 33
16 K 17 ② L ① ■ Removing the wall-hanging bracket Remove the wall-hanging bracket / wall-hanging parts in the reverse order of installing. ● Before removing the TV from the wall, remove the speaker from the TV first. Removing the TV with speaker from the wall may cause deformation or breakage of the brackets. ● Keep the removed parts for future use.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
