Model No. English TX-65EZ1000E Nederlands Română Operating Instructions OLED TV For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 23) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use. The images shown in this manual are for illustrative purposes only.
● For information about the trademarks, refer to [eHELP] (Search by Purpose > Read first > Before use > Licence).
Important Notice Do not display any still part of the image for a long period In such cases the still part of the image remains dimly on the screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. ● Typical still image parts: •• Still images shown continuously on the same area (ex. channel number, channel logo, other logos or title image, etc.) •• Still or moving pictures viewed in 4:3 or 14:9 aspect ratio, etc.
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: ■■Mains plug and lead Warning If you detect anything unusual, immediately remove the mains plug. ● This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. ● Insert the mains plug fully into the mains socket. ● To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times.
Warning Never place a TV in an unstable location. A TV may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: •• Using cabinets or stands recommended by the manufacturer of the TV. •• Only using furniture that can safely support the TV. •• Ensuring the TV is not overhanging the edge of the supporting furniture.
● When problems occur due to static electricity, etc., the TV might stop operating to protect itself. In this case, turn the TV off at the Mains power On / Off switch, then turn it back on. ■■Bluetooth® wireless technology Caution ● The TV and Touch Pad Controller use the 2.4 GHz radio frequency ISM band (Bluetooth®).
■■Magnetic influence Caution ● Keep magnet field sensitive objects, such as a cardiac pacemaker, magnetic / IC card, etc. away from the speaker. Otherwise, malfunction or data loss may occur. OLED TV The CE mark may be found on the model name plate located on the rear panel (when the terminal cover is removed.). Declaration of Conformity (DoC) Accessories Standard accessories Remote Control (p. 19) ● N2QAYA000144 Touch Pad Controller (p.
Assembling / Removing the pedestal / speaker Cover Assembly screw (4) M5 × 10 Assembly screw (5) M4 × 12 Speaker Assembly screw M3 × 5 Base Speaker cable T FRON Bracket (L) Assembling the pedestal / speaker A 1 R Bracket (R) D Cable cover (front) Cable cover (rear) 8 English F E L
2 5 J ① ② 3 6 J G 7 4 C English 9
8 9 B ● When the TV is uneven horizontal, loosen the assembly screws to set the TV horizontal.
10 12 13 K H Removing the pedestal Be sure to remove the pedestal in the following procedures when you repack the TV. To disconnect the speaker and speaker cable Keep pushing the knob 1 Remove the cable cover (rear) from the pedestal. 2 Remove the cover from the pedestal. 3 Disconnect the speaker cable . 4 Remove the assembly screws from the TV. 5 Lift the TV from the pedestal. 6 Remove the cable cover (front) from the pedestal. 7 Remove the speaker cable from the pedestal.
Installing the TV and speaker Ensure that the TV and speaker do not hang over the edge of the base. Connections ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. ● Keep the TV away from electronic equipment (video equipment, etc.
Terminals Basic connections ■■Mains lead 1 AC 220-240 V 2 10 11 3 4 50 / 60 Hz Mains lead Cable tie (Bundled the mains lead) To loosen: 5 6 7 Keep pushing the knob Knob To remove from the TV: Snaps 8 Keep pushing both side snaps 9 12 ■■Aerial 13 TV 1 Model name plate (p. 17) 2 CI slot 1 - 2 Cable 3 SD Card slot 4 HDMI1 - 2 (p. 15, 16) 5 USB 1 port 6 Terrestrial / cable terminal 7 Satellite terminal (p. 13) (p. 13) 8 AV (COMPONENT / VIDEO) 9 Headphone jack (p. 16) (p.
■■Dual Tuner (Single Cable System) TV DVB-via-IP client connection This TV has DVB-via-IP client function and can connect to DVB-via-IP server or SAT>IP compatible servers to receive broadcast streaming. ● It is recommended to connect to DVB-via-IP server with a LAN cable. ■■Wired connection TV Cable Satellite cable with Single Cable router Satellite dish ■■Single Tuner TV LAN cable (Shielded) ● Use Shielded Twist Pair (STP) LAN cable.
AV devices Network ■■DVD Recorder / Blu-ray Recorder, etc. TV A broadband network environment is required to be able to use internet services. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first (p. 22) using the TV.
■■[HDMI Auto Setting] (Setup Menu) Reproduces the image more precisely with the expanded colour gamut when connecting the 4K compatible equipment. Select the mode depending on the equipment. ■■Camcorder / Game equipment (VIDEO equipment) TV [Mode1]: For better compatibility. Set to [Mode1] when the image or sound in HDMI input is not played properly. [Mode2]: For the 4K compatible equipment that has the function to output the image precisely with the expanded colour gamut ● To change the mode 1.
■■Common Interface ● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module. ● Insert or remove the CI module completely in the correct direction as shown. ● Normally encrypted channels will appear. (Viewable channels and their features depend on the CI module.) Cable arrangement Before fixing the cables, remove the cover and cable cover (rear).
Bundle the cables Set the tip in the hooks ● If all cables cannot pass the cable guide, fix the cables using the cable tie as follows. Hooks To loosen: Keep pushing the knob Knob To remove from the TV: Snaps Keep pushing both side snaps ■■Fixing the cables using the cable clamp cable clamp To release: Keep pushing the tab Tab Bundle the cable Set ● Fix cables as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables.
Identifying Controls Remote Control 6 OK ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. ● Displays channel list. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 Netflix ● Accesses NETFLIX service directly. ● A broadband network environment is required in order to fully use this function. ● This service may be stopped or changed without notice.
25 Last view ● Switches to previously viewed channel or input mode. 26 Operations for contents, connected equipment, etc. ■■Installing / Removing batteries Pull open Hook Close 1 [ Note the correct polarity (+ or -) Touch Pad Controller The Touch Pad Controller is designed for convenient and intuitive operation, especially with [Home Screen] or internet content. ● Touch Pad Controller can be used exclusively for controlling this TV.
■■Installing / Removing batteries 2 Ambient sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On]. Slide open 3 Power LED Red: Standby Green: On Orange: Standby with some functions (recording, etc.) active or panel maintenance in progress ● The LED blinks when the TV receives a command from the remote control. 4 Input mode selection ● Press repeatedly until you reach the desired mode.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 12 - 18) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 21) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
● To scroll the description (if more than 1 page) While the description is highlighted ● To open the reference screen ( ) ● To display the menu related to the description (only for some descriptions) (red) ● To check the features of this TV Search by Purpose > Read first > Features 24 English
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p. 20) ● Has the TV been switched on? ● The batteries may be running low.
Maintenance First, remove the mains plug from the mains socket. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Specifications ■■TV Model No. HDMI 1 / 2 / 3 / 4 input TYPE A Connectors HDMI1 / 3 / 4: 4K, Content Type, Deep Colour, x.v.Colour™ HDMI2: 4K, Content Type, Audio Return Channel, Deep Colour, x.v.Colour™ TX-65EZ1000E ● This TV supports “HDAVI Control 5” function. Dimensions (W × H × D) Card slot 1 452 mm × 918 mm × 330 mm (With Pedestal and speaker) 1 452 mm × 904 mm × 90 mm (With speaker (using “ACCESSORIES FOR SPEAKER WALL-HANGING”)) 1 452 mm × 837 mm × 42 mm (TV only) Mass 27.
PAL D, K SECAM D, K VHF R1 - R2 VHF R3 - R5 VHF R6 - R12 UHF E21 - E69 PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR) M.NTSC Playback from M.NTSC Video recorders (VCR) NTSC (AV input only) Playback from NTSC Video recorders (VCR) Satellite dish input Female F-type 75 Ω × 2 Aerial input VHF / UHF Operating conditions Note ● Touch Pad Controller uses Bluetooth wireless technology. ● Design and Specifications are subject to change without notice.
Bracket (L) Speaker holder (2) Bracket (R) 1 ■■ACCESSORIES FOR SPEAKER WALLHANGING C F E D Assembly screw (8) M4 × 12 Speaker bracket (2) Speaker bracket (2) Cable cover Cable cover English 29
2 3 G H 4 A I G 5 A J 30 English
6 Installing the wall-hanging bracket 7 Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
9 12 Hang the TV on the wall 10 G 13 11 14 K I 32 English
15 K 16 ② L ① ■■Removing the wall-hanging bracket Remove the wall-hanging bracket / wall-hanging parts in the reverse order of installing. ● Before removing the TV from the wall, remove the speaker from the TV first. Removing the TV with speaker from the wall may cause deformation or breakage of the brackets. ● Keep the removed parts for future use.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
