Model No. English TX-58DX902B TX-65DX902B Operating Instructions LED TV For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 18) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use. The images shown in this manual are for illustrative purposes only.
● For information about the trademarks, refer to [eHELP] (Support > Licence).
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2015) of digital services. ● Not all the features are available depending on the country, area, broadcaster, service provider and network environment. ● Compatibility with future services is not guaranteed.
● Insert the mains plug fully into the mains socket. ● To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times. ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands. ● Do not damage the mains lead. •• Do not place a heavy object on the lead. •• Do not place the lead near a high temperature object. •• Do not pull on the lead.
■■Pedestal Warning ● Do not disassemble or modify the pedestal. Caution ● Do not use any pedestal other than the one provided with this TV. ● Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. ● During setup, make sure that all screws are securely tightened. ● Ensure that the TV does not suffer any impact during installation of the pedestal. ● Ensure that children do not climb onto the pedestal.
■■Excessive volume LED TV Caution ● Do not expose your ears to excessive volume from the headphones. Irreversible damage can be caused. ● If you hear a drumming noise in your ears, turn down the volume or temporarily stop using the headphones. ■■Battery for the Remote Control / Touch Pad Controller Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type. ● Do not mix old and new batteries.
Accessories Standard accessories Assembling / Removing the pedestal When using the pedestal, this TV is slightly inclined because of the slant design adopted. Assembly screw (4) M4 × 12 Remote Control (p. 14) ● N2QAYA000097 Assembly screw (4) M4 × 12 Bracket (2) Touch Pad Controller (p. 15) ● N2QBYA000012 Pedestal Base This illustration is the assembled pedestal. Be sure to assemble it. (p. 7) Cable guide (p. 12) Batteries (4) ● R03 ■■Assembling the pedestal 1 C (p.
Removing the pedestal from the TV Insert the pedestal at a slight angle into the TV as shown. Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws from the TV. 2 Lift up the TV at a slight angle from the pedestal as shown. (View from the side) (View from the side) 3 Remove the assembly screws 2 B 3 8 English from the bracket.
Connections Terminals ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. ● Keep the TV away from electronic equipment (video equipment, etc.
Basic connections ■■Mains lead Satellite dish ■■Single Tuner TV AC 220-240 V 50 / 60 Hz Mains lead Satellite cable Cable tie (Bundled the mains lead) To loosen: Satellite dish ● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details.
■■[HDMI Auto Setting] (Setup Menu) Network A broadband network environment is required to be able to use internet services. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first (p. 17) using the TV.
■■Amplifier (listening with external speakers) ● Use HDMI2 to connect the TV to an amplifier which has ARC (Audio Return Channel) function. TV If connecting to an amplifier without ARC function, use DIGITAL AUDIO. ● To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For information about the connections, read the manuals of the equipment and amplifier.
■■Fixing the cables using the cable clamp and cable guide ■■Attaching the cable cover ● Do not apply load to the cable cover. ● Be careful not to nip the cables between the TV and the cable cover. ● When using AV terminal, you cannot attach the cable cover. Keep the removed cable cover for future use. Open Cable clamp 1 2 Close ● Fix cables as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables.
Identifying Controls Remote Control 6 OK ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 APPS ● Displays [Apps] (applications list). 9 Sound Mute On / Off 10 Text service button 11 Volume Up / Down 12 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on. 13 [eHELP] ● Displays [eHELP] (Built-in Operating Instructions).
■■Installing / Removing batteries Pull open Hook Close Note the correct polarity (+ or -) Touch Pad Controller The Touch Pad Controller is designed for convenient and intuitive operation, especially with [Home Screen] or internet content. ● Touch Pad Controller can be used exclusively for controlling this TV. ● Register the Touch Pad Controller to this TV with Bluetooth wireless technology before using.
■■Installing / Removing batteries Indicator / Control panel Slide open ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight which button has been pressed. 4 5 6 1 Close Note the correct polarity (+ or -) Note ● It is recommended to hold Touch Pad Controller with your hand when using. ● The battery power will be used whenever you use Touch Pad Controller (including the touch of the touch pad) even if not operating the TV.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 9 - 13) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 16) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
Viewing 3D images You can enjoy viewing 3D images of content or programmes supporting 3D effects by wearing the 3D Eyewear (optional). ● The 3D Eyewear must be worn to view 3D images. ● When using the 3D Eyewear, please also read the manual of the 3D Eyewear. ● This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats. (3D content in 4K format is not supported.) ● For details, refer to [eHELP] (Watching > 3D).
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3) The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p.
Maintenance Specifications First, remove the mains plug from the mains socket. ■■TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
HDMI 1 / 2 / 3 / 4 input TYPE A Connectors HDMI1 / 3 / 4: 4K, 3D (3D content of 4K format is not supported.), Content Type, Deep Colour, x.v.Colour™ HDMI2: 4K, 3D (3D content of 4K format is not supported.), Content Type, Audio Return Channel, Deep Colour, x.v.Colour™ ● This TV supports “HDAVI Control 5” function. Card slot SD Card slot × 1 Common Interface slot (complies with CI Plus) × 1 ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX USB 1 / 2 / 3 5 V, Max. 500 mA [Hi-Speed USB USB1 / 2: DC (USB 2.
Note ● Touch Pad Controller uses Bluetooth wireless technology. ● Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. ● For information about the power consumption, display resolution, etc., refer to Product fiche. ● For information about the open source software, refer to [eHELP] (Support > Licence). ■■When using the wall-hanging bracket Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
