TX-50CX802B TX-55CX802B TX-65CX802B e HELP English
Read first eHELP • How to use 13 Features • 4K resolution 14 • Home Screen 15 • Info Frame 16 • Touch Pad Controller 17 • TV Anywhere 18 • Freeview EPG 19 • Dual Tuner 20 • Easy Mirroring 21 Home Screen Home Screen • Information 22 • How to use 24 • Pin to HOME 25 • Option menu 26 Live TV • How to use 27 • Option menu 28 Apps • How to use 29 • Option menu 30 Devices • How to use 31 • Option menu 32 Watching Basic • Satellite connection 33 • Basic connection 35 -2-
• Selecting channel 37 • Information banner 39 • AV Options 42 • Subtitle 44 • Last view 45 • Off Timer 46 • Energy saving functions 47 • Adjusting time 49 • Language 50 4K resolution • 4K compatible equipment 52 • HDCP Setting 53 • HDMI Auto Setting 54 • Valid 4K format 55 External equipment • External connection 56 • Watching external input 60 • Operating with TV’s remote control 62 • HDMI features 64 • Terminal information 66 • Valid input signals 68 For best picture
For best audio • Sound mode 89 • Basic settings 90 • Volume settings 92 • Voice Guidance Settings 94 • Audio Description 95 • Advanced settings 96 TV Guide • Freeview EPG (UK) 98 • TV Guide (Ireland) 100 • Timer Programming 102 • Guide link programming 103 Teletext • Digital text service 104 • Viewing Teletext 105 • Teletext mode 107 • Teletext Character Set 108 3D • Note 109 • Viewing 3D 110 • 3D Mode Selection 112 • 3D Settings 113 • Source image format 115 Tuning and
• Signal Condition 130 • Add New Channels 131 • Other settings 132 Recording USB HDD setup • Preparations 133 • Setting for USB HDD 135 Recording current programme • One Touch Recording 137 Timer Programming • Setting Timer Programming 138 • Editing Timer Programming 140 • Remote recording 141 • Note 142 Technical information • USB HDD 143 Media Player Using Media Player • Information 144 • Selecting device / mode 146 • Network device 148 • Sharing file 149 Photo mode • Selecti
• Audio output settings 160 Recorded TV mode • Selecting content 161 • Watching recorded TV 162 • Grouping content 164 • Deleting content 165 • Chapter List 166 • Audio output settings 167 Music mode • Selecting file 168 • Playing music 169 • Music Setup 170 Technical information • Device handling caution 171 • SD Card 172 • USB devices 173 • Photo format 174 • Video format 175 • Music format 178 Network Internet content • Information 179 • Selecting internet conte
Network settings • Network Connection 190 • Custom - Wireless 192 • Custom - Wired 195 • Custom - Wireless Access Point 197 • Network Status 198 • my Home Cloud Settings 199 • VIERA Name 200 • TV Remote App Settings 201 • Network Link Settings 203 • TV Anywhere Settings 205 • File Sharing Settings 206 • Mirroring Settings 207 • Do Not Track Setting 208 • Software Update 209 • New Software Message 210 Photos • Selecting file 211 • Viewing photo 212 • Using Slideshow 213 Videos • Selecting file 21
• Video format 225 • Music format 228 Functions Info Frame • Information 229 • How to use 230 • Settings 231 Voice Control • Information 232 • How to use 233 • Settings 235 • Note 236 Touch Pad Controller • Information 237 • Pairing 238 • Identifying controls 239 • Settings 241 TV Anywhere • How to use 242 • TV Anywhere Settings 243 Mirroring • How to use 244 • Mirroring Settings 245 Multi Window • Information 246 • How to use 247 • Note 249 VIERA Link “HDAVI Control™” • Summar
• Power off Link 258 • Standby Power Save 259 • Intelligent Auto Standby 260 • VIERA Link Control 261 • Speaker Selection 263 • Note 264 Child Lock • Using Child Lock 265 • PIN number 267 • Parental Rating 268 Common Interface • Caution 269 • Using Common Interface 270 Shipping Condition • Shipping Condition 271 Updating the TV Software • Information 272 • Auto update 273 • Manual update 274 Setting characters • Using Numeric buttons 275 Bluetooth devices • Bluetooth Setup 276 Keyboard
• Ambient Sensor 284 • Noise reduction settings 285 • Advanced Settings 286 • Option Settings 287 • Screen Settings 289 • 3D Settings 290 • Lock Settings 291 • Copy Adjustment 292 • Reset to Defaults 293 Sound • Mode 294 • Basic settings 295 • Volume settings 296 • Voice Guidance Settings 297 • Audio Description 298 • Advanced settings 299 • Reset to Defaults 301 Network • Network Connection 302 • Network Status 303 • my Home Cloud Settings 304 • VIERA Name 305 • TV Remote App Settings 306 • N
• No signal Power off 317 Setup • Eco Navigation 318 • Voice Control Settings 319 • USB Device Setup 320 • Recording Setup 321 • VIERA Touch Pad Controller 322 • Bluetooth Setup 323 • Child Lock 324 • Tuning Menu 325 • Language 327 • Display Settings 328 • HDCP Setting 330 • HDMI Auto Setting 331 • VIERA Link Settings 332 • System Menu 333 • Other Settings 334 Support Help menu • Using Help menu 335 FAQs • Picture 336 • Digital TV 338 • Analogue TV 340 • Sound 341 • 3D 342 • HDMI 343 • Network 34
Optional accessories • 3D Eyewear 349 • Wall-hanging bracket 350 Licence • Licence 351 - 12 -
Read first eHELP How to use ■■Meaning of signs OK : Letters enclosed in brackets indicate remote control buttons. Menu : Letters in cyan indicate on-screen display items. : References in this eHELP When the icon ( ) is displayed, you can jump to the page for detailed descriptions pressing Numeric buttons. (red) : Displays the menu related to the description (only for some descriptions) = Note = ●● Design and Specifications are subject to change without notice.
Features 4K resolution You can watch content in 4K format that has twice the horizontal and vertical resolution of the 1080p signal.
Home Screen “Home Screen” is a gateway to the TV programmes, applications and connected devices. It provides you an easy way to access all the features.
Info Frame Info Frame is a convenient feature to provide you relevant information of the watching programme, recommendations, etc. It is displayed on the edge of screen when you need it.
Touch Pad Controller Touch Pad Controller is designed for the convenient operations on the application, internet content, etc. You can operate the TV intuitively with this controller.
TV Anywhere You can watch TV and set timer event with the network equipment (smartphone, etc.) from outside the home network.
Freeview EPG Using the Freeview EPG enables you to select a programme easily, view programme information, etc.
Dual Tuner You can watch or record 2 programmes simultaneously, watch a programme while recording another programme, etc.
Easy Mirroring You can watch display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. You can also start the mirroring function from the other devices without operating the TV.
Home Screen Home Screen Information “Home Screen” is a gateway to the TV programmes, applications and connected devices. Home Screen is displayed by pressing HOME and it provides you an easy way to access all the features as shown below (example). Home Screen Live TV – Gateway to TV programmes Home Screen > Live TV Apps – Gateway to various applications (internet content, etc.) Home Screen > Apps Devices – Gateway to connected devices (HDMI equipment, USB device, network device, etc.
= Note = ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use Home Screen. You can update the software later manually.
How to use From Home Screen, you can access all the features such as TV programmes, applications and connected devices. 1. Display Home Screen with HOME. (Example) 2. Select Live TV / Apps / Devices and press OK to access. ●● To watch full-screen TV, select Live TV. (Example) ●● Also refer to on the top right of Home Screen for the operations. ■■Search You can search the content from various features. 1. Display Home Screen with HOME. 2. Select on the top left of Home Screen and press OK to access.
Pin to HOME You can add a shortcut for a frequently used feature on Home Screen. 1. Display Home Screen with HOME. 2. Select Live TV / Apps / Devices and press OK to access. 3. Select a feature (TV programme / application / device). 4. Display the option menu with OPTION. 5. Select Pin to HOME and press OK to set. ●● You can also add a shortcut pressing Controller. (Pin to HOME) of Touch Pad ●● To remove a shortcut from Home Screen, set Unpin from HOME.
Option menu You can customise Home Screen. 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Unpin from HOME / Move 3. Set the item and press OK to store. Unpin from HOME Remove a shortcut from Home Screen. Move Arranges the position of the icons.
Live TV How to use Live TV is a gateway to the TV programmes. 1. Display Home Screen with HOME. 2. Select Live TV. (Example) 3. Press OK to access.
Option menu 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Pin to HOME / Unpin from HOME / Accessibility / AV Options 3. Set the item and press OK to store. Pin to HOME, Unpin from HOME Adds / removes a shortcut for a frequently used feature on Home Screen. Home Screen > Home Screen > Pin to HOME ●● The label (channel position, channel name, etc.) of shortcut is not updated by broadcasters automatically.
Apps How to use Various applications (internet content, etc.) can be accessed easily from Apps. 1. Display Home Screen with HOME. 2. Select Apps and press OK to access. (Example) ●● To exit Apps EXIT ●● To add a shortcut icon Home Screen > Home Screen > Pin to HOME 3. Select an application and press OK to access. 4. Follow the on-screen instructions. = Note = ●● A broadband network environment is required to be able to use this function fully.
Option menu 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Pin to HOME / Unpin from HOME / Move / Lock / Unlock / Uninstall / Show Info. 3. Set the item and press OK to store. Pin to HOME, Unpin from HOME Adds / removes a shortcut for a frequently used feature on Home Screen. Home Screen > Home Screen > Pin to HOME Move Arranges the position of the applications.
Devices How to use Connected devices (HDMI equipment, USB device, network device, etc.) can be accessed easily from Devices. 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. (Example) ●● To exit Devices EXIT ●● To add a shortcut icon Home Screen > Home Screen > Pin to HOME 3. Select a device and press OK to access.
Option menu 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Pin to HOME / Unpin from HOME / Accessibility / Show Info. 3. Set the item and press OK to store. Pin to HOME, Unpin from HOME Adds / removes a shortcut for a frequently used feature on Home Screen. Home Screen > Home Screen > Pin to HOME Accessibility Guidance settings for visually impaired users Watching > For best audio > Voice Guidance Settings Show Info.
Watching Basic Satellite connection Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●● External equipment and cables shown are not supplied with this TV. ●● For Freesat, Other Sat., Satellite ■■Dual Tuner Connect the both of satellite IN 1 / IN 2 terminals to the satellite dish, and you can watch or record 2 satellite programmes simultaneously, etc.
= Note = ●● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details. ●● The Freesat channel uses Astra2 at 28.2° East and Eurobird1 at 28.5° East satellites. To ensure your satellite dish is correctly installed, consult your Freesat registered dealer. (UK only) ●● Keep the TV away from electronic equipment (video equipment, etc.
Basic connection Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●● External equipment and cables shown are not supplied with this TV.
■■DVD Recorder (VCR) / Cable TV box HDMI terminal HDMI cable Cable TV box Terrestrial aerial / Cable AV1 (SCART) terminal SCART cable RF cable / SCART cable Terrestrial terminal RF cable DVD Recorder / VCR = Note = ●● For details of VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Please also read the manual of the equipment being connected. ●● Keep the TV away from electronic equipment (video equipment, etc.
Selecting channel 1. Select the mode with TV. Freesat (UK only) / DVB / Analogue / Other Sat. (UK only) / Satellite (Ireland only) ●● Selectable modes vary depending on the channels stored. 2. Select a channel with Channel Up / Down or Numeric buttons. ●● Freesat channel position numbers are in the 100 - 999 and 0100 - 0999 ranges. DVB and Other Sat. / Satellite channel position begin from number 1 upward. Analogue channel position numbers are in the 0 - 99 range.
■■To select the type of channel list Automatically selects all channels or favourites list in the information banner when the TV is turned on. 1. Display the menu with MENU. 2. Select Setup > Other Settings > Power on Channel List and press OK to access. 3. Select All Channel List / Last and press OK to set.
Information banner Display information banner with ●● . Also appears when changing a channel. (Example) Channel position and name Channel type (Radio, HDTV, etc.) / Encrypted channel ( , ) ) / TV mode ( Programme Start time / End time (except Analogue) Channel position, etc. (Analogue) Progress time indicator of the selected programme (except Analogue) All DVB Channels / All Other Sat. Channels / All Satellite Channels / All Analogue Channels / Favourites ●● Press (blue) to switch. (DVB / Other Sat.
Also in : Same programme available as HD broadcast (UK only) ●● To display the extra information for details STTL: Subtitle service available TEXT: Text service available Multi Audio: Multiple audio available Stereo, Mono, NICAM: Audio mode 1 – 90: Off Timer remaining time Watching > Basic > Off Timer ●● To confirm another tuned channel / ●● To watch the channel listed in the banner OK ●● Information on the next programme (DVB) ●● Extra information (DVB) – Press again to hide the banner.
●● To display the introduction banner for the internet service 1) Display the menu with MENU. 2) Select Setup > Display Settings > Smart Banner and press OK to access. 3) Select On / Off and press OK to set. ●● AD, STTL, TEXT, Multi Audio indications are displayed as available on particular programmes, but may not be available for all individual programmes being broadcast. Display the extra information to confirm availability of these functions.
AV Options Confirm or change the current status. ●● Display the full-screen TV to use this function. 1. Display the option menu with OPTION. 2. Select AV Options and press OK to access. 3. Select one of the following items and press OK to access. Audio Type / Multi Audio / Monaural Audio / Sub Channel / Subtitle Language / Teletext Character Set / Teletext Language / NICAM / Volume Correction ●● The function items vary depending on the TV mode and country you select. 4.
Sub Channel Selects the multifeed programme - sub channel (if available). ●● For Other Sat., Satellite Subtitle Language Selects the language in which subtitles should appear (if available). ●● This setting is not memorised and it returns to the default setting once you exit the current programme. ●● Not valid in Analogue ●● Not valid on the sub screen in multi window mode Teletext Character Set Sets the teletext language font.
Subtitle ■■Freesat, DVB, Other Sat., Satellite Display / hide subtitles (if available) with STTL. ●● To select the preferred subtitle type 1) Display the menu with MENU. 2) Select Setup > Display Settings > Preferred Subtitle Type and press OK to access. 3) Select Standard / Hard of Hearing and press OK to set. – Hard of Hearing provides aids in understanding and enjoyment with digital channel subtitles (depending on the broadcaster).
Last view Switch to a previously viewed channel or input mode easily with LAST VIEW. ●● Press again to return to the current view. = Note = ●● Switching channel may not be available depending on the condition. ●● Watching less than 10 seconds is not reflected in the previously viewed channel or input mode.
Off Timer Turn the TV Standby mode automatically after a fixed period. 1. Display the menu with MENU. 2. Select Timer > Off Timer and press OK to access. 3. Select the time in 15-minute increments and press OK to set. 90 / 75 / 60 / 45 / 30 / 15 / Off (minutes) ●● To cancel, set to Off or turn the TV off. ●● The remaining time is displayed on the bottom right of the screen. ●● When the remaining time is less than 3 minutes, the remaining time will flash on the screen.
Energy saving functions The TV can be eco-friendly using energy-saving functions. The TV goes into Standby mode in the following conditions: ●● Eco Navigation is set to Set to Eco. ●● Off Timer is active. Watching > Basic > Off Timer ●● No operation is performed for 4 hours while Auto Standby is set to On. ●● No signal is received and no operation is performed for 10 minutes while No signal Power off is set to On. = Note = ●● This function does not affect the recording. ■■Auto Standby 1.
No signal Power off (On / Off) Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes. ●● A notification message will appear 3 minutes before going into Standby mode. ■■Eco Navigation Automatically sets the TV to the most suitable energy-saving mode. The concerned items and their current settings are displayed. Select Set to Eco to set them to the energy-saving settings at once. 1.
Adjusting time Adjusts the time data. 1. Display the menu with MENU. 2. Select Timer > Time Zone and press OK to access. 3. Set the item and press OK to store. ●● The time data are corrected based on GMT.
Language 1. Display the menu with MENU. 2. Select Setup > Language and press OK to access. 3. Select one of the following items and press OK to access. Preferred Multi Audio / Preferred Audio 1 / 2 / Preferred Subtitles 1 / 2 / Preferred Subtitles / Preferred Teletext 4. Set the item and press OK to store. Preferred Multi Audio Selects the preferred language for digital channel multi audio (depending on the broadcaster).
Preferred Teletext Selects the preferred language for digital channel teletext service (depending on the broadcaster).
4K resolution 4K compatible equipment You can watch content in 4K format that has twice the horizontal and vertical resolution of the 1080p signal. ●● For details of valid 4K format Watching > 4K resolution > Valid 4K format ●● Connect the 4K compatible equipment to HDMI terminal using a 4K compatible cable and you can watch content in 4K format. ■■4K compatible equipment HDMI terminal HDMI cable 4K compatible equipment ●● Check the terminal type and cable plugs are correct for connection.
HDCP Setting 1. Display the menu with MENU. 2. Select Setup > HDCP Setting and press OK to access. 3. Set the item and press OK to store. HDCP Setting (Auto / 2.2 / 1.4) Select a version of HDCP according to the content you watch. ●● HDCP is a technology of copy protection for digital audio / video content.
HDMI Auto Setting 1. Display the menu with MENU. 2. Select Setup > HDMI Auto Setting and press OK to access. 3. Set the item and press OK to store. HDMI Auto Setting (Mode1 / Mode2) Set to Mode1 when the image in HDMI input is not displayed properly.
Valid 4K format ■■Valid 4K format (HDMI) ●● 4K UHD 3 840 × 2 160 (60p, 50p, 30p, 25p, 24p) – Aspect is fixed to 16:9. ●● DCI 4K 4 096 × 2 160 (60p, 50p, 30p, 25p, 24p) – Actual resolution is 3 840 × 2 160p. – Aspect is fixed to V Full. = Note = ●● The above signals are reformatted for optimal viewing on your display. ●● 3D content in 4K format is not supported.
External equipment External connection These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment. ●● For details of basic connection Watching > Basic > Basic connection ●● To use the specific devices supporting Bluetooth wireless technology Functions > Bluetooth devices ●● Check the terminal type and cable plugs are correct for connection.
■■AV devices AV2 (COMPONENT) terminals Component cables DVD Player AV2 (VIDEO) terminals Composite cables Camcorder / Game equipment - 57 -
■■USB devices USB port USB cable USB HDD = Note = ●● It is recommended to connect the device to the TV’s USB port directly. ●● You cannot use two or more of the same kind of USB devices simultaneously except USB Flash Memory or USB HDD. ●● Use USB 3 port for connecting the USB HDD. ●● Some USB devices or USB HUB may not be used with this TV. ●● You cannot connect any devices by using USB card reader. ●● Additional information about the devices may be on the following website. http://panasonic.
■■Headphones Headphone jack M3 stereo mini plug Headphones ●● To adjust volume, set Headphone Volume. Watching > For best audio > Advanced settings ●● To select the sound output to adjust volume, set TV Speaker Setting.
Watching external input Connect the external equipment (VCR, DVD, etc.) and you can watch through the input. 1. Display the input selection menu with AV. 2. Select the input mode connected to the equipment and press OK to watch. (The selected mode is displayed on the top left of the screen.) ●● TV receives input signals automatically connecting with SCART when playback starts. – Input signals are automatically identified by the SCART (pin 8) terminal.
■■Input Labels Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in Input Selection, banner, etc. Watching > Basic > Information banner 1. Display the menu with MENU. 2. Select Setup > Display Settings > Input Labels and press OK to access. 3. Set the item and press OK to set. ●● To name each input mode freely, select User input and set characters (maximum 10 characters). ●● To skip the input mode, select Skip.
Operating with TV’s remote control You can operate the content in Media Player / media server, recording functions or the connected equipment with the following buttons of this TV’s remote control.
■■How to change the code Each Panasonic product has its own remote control code. Change the code according to the product for operation. 1. Press and hold Standby On / Off switch during the following operations. 2. Enter the appropriate code as follows with Numeric buttons. ●● Codes for each product and features 70: DVD Recorder, DVD Player, Blu-ray Disc Player 71: Player theatre, Blu-ray Disc theatre 72: VCR 73 (default): Using in USB HDD recording, Media Player, DLNA features or VIERA Link 3.
HDMI features HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using a fully wired HDMI compliant cable.
■■DVI connection If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When using the DVI to HDMI adaptor cable, connect the audio cable to the audio input terminal (use AV2 audio terminals). ●● Enquire HDMI adaptor cable at your local digital equipment retailer shop. = Note = ●● Audio settings can be made on HDMI Input in the Sound Menu.
Terminal information ■■AV1 (SCART) terminal (RGB, VIDEO) 1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 : 9 : 10: 11 : Audio out (R) Audio in (R) Audio out (L) Audio earth Blue earth Audio in (L) Blue in Status CVBS Green earth -Green in 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: - 66 - -Red earth Earth Red in Status RGB CVBS earth RGB status earth CVBS out (video) CVBS in (video) Socket Earth
■■HDMI terminal 1 : TMDS Data2+ 11 : TMDS Clock Shield 2 : TMDS Data2 Shield 12: TMDS Clock− 3 : TMDS Data2− 13: CEC 4 : TMDS Data1+ 14: Utility 5 : TMDS Data1 Shield 15: SCL 6 : TMDS Data1− 16: SDA 7 : TMDS Data0+ 17: DDC/CEC Ground 8 : TMDS Data0 Shield 18: +5V Power 9 : TMDS Data0− 19: Hot Plug Detect 10: TMDS Clock+ - 67 -
Valid input signals ■■COMPONENT, HDMI Signal name COMPONENT HDMI 525 (480) / 60i, 60p ○ ○ 625 (576) / 50i, 50p ○ ○ 750 (720) / 60p, 50p ○ ○ 1 125 (1 080) / 60i, 50i ○ ○ 1 125 (1 080) / 60p, 50p, 24p ○ 3 840 × 2 160 / 60p, 50p, 30p, 25p, 24p ○ 4 096 × 2 160 / 60p, 50p, 30p, 25p, 24p ○ ○: Applicable input signal = Note = ●● Signals other than above may not be displayed properly. ●● The above signals are reformatted for optimal viewing on your display.
For best picture Viewing Mode 1. Display the menu with MENU. 2. Select Picture > Viewing Mode and press OK to access. 3. Select the mode and press OK to set. Viewing Mode (Dynamic / Normal / Cinema / THX Cinema / THX Bright Room / True Cinema / Custom / Professional1 / Professional2) Selects your favourite picture mode for each input. Dynamic: Improves contrast and sharpness for viewing in a bright room. Normal: Normal use for viewing in a normal lighting condition.
●● The following items can be adjusted and stored for each mode. Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour Temperature / Vivid Colour / Colour Remaster / Rec.2020 Colour Remaster / Reversal Film Effect / Adaptive Backlight Control / Ambient Sensor / Noise Reduction / MPEG Remaster / Resolution Remaster / Dynamic Range Remaster / Intelligent Frame Creation / 24p Smooth Film ●● You can set Viewing Mode in 2D and 3D mode for each.
Ambient Sensor 1. Display the menu with MENU. 2. Select Picture > Ambient Sensor and press OK to access. 3. Select On / Off and press OK to set. Ambient Sensor (On / Off) ●● Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting condition.
Aspect Change the aspect ratio (image size) with ASPECT. ■■To change the aspect ratio manually 1. Display Aspect Selection with ASPECT. 2. Select the mode and press OK to set. ●● You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) Auto: The best ratio is selected automatically according to the “Aspect Control Signal”. Watching > For best picture > Aspect Control Signal 16:9: Directly displays the image at 16:9 without distortion (anamorphic).
Aspect Control Signal Programmes usually contain an “Aspect Control Signal”. (Widescreen signal, Control signal through SCART / HDMI terminal) In Auto mode, aspect mode will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI terminal is found. The aspect switches to the appropriate ratio.
●● AV2 (COMPONENT) terminals (WSS only) Valid input signal format: 625 (576) / 50i, 50p Invalid input signal format: 525 (480) / 60i, 60p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i ●● HDMI terminal Valid input signal format: 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i 1 125 (1 080) / 60p, 50p, 24p 3 840 × 2 160 / 60p, 50p, 30p, 25p, 24p 4 096 × 2 160 / 60p, 50p, 30p, 25p, 24p ●● HDMI terminal does not receive WSS signal.
Basic settings 1. Display the menu with MENU. 2. Select Picture and press OK to access. 3. Select one of the following items and press OK to access. Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour Temperature / Vivid Colour / Colour Remaster / Rec.2020 Colour Remaster / Reversal Film Effect / Adaptive Backlight Control / Resolution Remaster / Dynamic Range Remaster / Intelligent Frame Creation / 24p Smooth Film 4. Set the item and press OK to store.
Reversal Film Effect (Max / Min / Off) Provides the picture effect such as the reversal film for photo content. ●● For photo content ●● Not valid when Viewing Mode is THX mode Adaptive Backlight Control Automatically controls the level of backlight according to the images. Resolution Remaster (Auto / Max / Mid / Min / Off) Enhances picture resolution to make the image sharper.
24p Smooth Film (Max / Mid / Min / Off) Automatically compensates the picture frame rate to make the 24p source movie images smooth. ●● This function is available only for 24p signal input and displayed instead of Intelligent Frame Creation. ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On.
Noise reduction settings 1. Display the menu with MENU. 2. Select Picture > Noise Reduction / MPEG Remaster and press OK to access. 3. Set the item and press OK to store. Noise Reduction (Auto / Max / Mid / Min / Off) Reduces unwanted picture noise. ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On.
Advanced Settings You can adjust and set up the detailed picture settings when Viewing Mode is set to Cinema, True Cinema, Custom or Professional1 / 2. The settings in True Cinema, Custom or Professional1 / 2 can be stored for each input. Watching > For best picture > Viewing Mode 1. Select the input mode with AV or TV. 2. Display the menu with MENU. 3. Select Picture > Viewing Mode and press OK to access. 4. Select the mode and press OK to set.
■■Colour Gamut Colour Gamut (Native / Rec. 709 / SMPTE-C / EBU) Reproduces image colour precisely according to the colour gamut standards. Native: Displays deep colours by expanding the colour gamut to its maximum. Rec. 709: Standard for HD (High definition) SMPTE-C: Standard for NTSC EBU: Standard for PAL ●● Set Colour Remaster, Rec.2020 Colour Remaster and Reversal Film Effect to Off to use this function.
■■Colour Management R-Hue / R-Saturation / R-Luminance Adjusts the picture hue / saturation / luminance of red areas. G-Hue / G-Saturation / G-Luminance Adjusts the picture hue / saturation / luminance of green areas. B-Hue / B-Saturation / B-Luminance Adjusts the picture hue / saturation / luminance of blue areas. More Detailed Adjustment Adjusts more detailed items for Colour Management. C-Hue / M-Hue / Y-Hue: Adjusts the picture hue of cyan / magenta / yellow areas.
Gain: Adjusts the gain of gamma for selected signal level. Reset to Defaults: Resets items for More Detailed Adjustment. Reset to Defaults Resets Gamma to the default settings. ■■Reset to Defaults Reset to Defaults Resets Advanced Settings to the default settings.
Option Settings 1. Display the menu with MENU. 2. Select Picture > Option Settings and press OK to access. 3. Select one of the following items and press OK to access. Game Mode / Film Cadence Mode / 1080p Pure Direct / 4K Pure Direct / 1080p Pixel by 4pixels / HDMI Content Type / HDMI RGB Range / 3D-COMB 4. Set the item and press OK to store. Game Mode (On / Off) Provides suitable images for fast response signals when playing games.
1080p Pixel by 4pixels (On / Off) Displays like pixel by pixel to make the image sharper for 1080p signal. ●● For HDMI ●● Not all image may be displayed as pixel by pixel precisely. ●● Not valid in the following conditions: – 3D – Multi window HDMI Content Type (Graphics / Photos / Auto / Off) Adjusts the picture settings of each HDMI input according to the selected content type.
Screen Settings 1. Display the menu with MENU. 2. Select Picture > Screen Settings and press OK to access. 3. Select one of the following items and press OK to access. 16:9 Overscan / Zoom Adjustments / Screen Display 4. Set the item and press OK to store. 16:9 Overscan (On / Off) Selects the screen area displaying the image for 16:9 aspect. On: Enlarges the image to hide the edge of the image. Off: Displays the image in the original size. ●● Set to On if noise occurs on the edge of the screen.
Screen Display (On / Off) Turns the screen off when you select Off. ●● This function is effective in reducing power consumption when listening to the sound without watching the TV screen. ●● Press any buttons (except Standby On / Off switch) to turn the screen on.
Lock Settings Locks the settings of Professional1 / 2 for each input. ●● Select Professional1 / Professional2 in Viewing Mode in advance. Watching > For best picture > Viewing Mode 1. Display the menu with MENU. 2. Select Picture > Lock Settings and press OK to access. 3. Enter the PIN number (4 digits) with Numeric buttons. ●● Enter the PIN number twice at first setting. ●● Make a note of the PIN number in case you forget it. 4. Select Adjustment Lock and press OK to access. 5.
Copy Adjustment Copies the picture settings of True Cinema, Custom, Professional1 or Professional2 to those of the other input mode or Viewing Mode. 1. Display the menu with MENU. 2. Select Picture > Copy Adjustment > Destination Viewing Mode / Destination Input and press OK to access. 3. Select the destination to copy to and press OK to set. 4. Select Copy Start and press OK to copy. 5. When a confirmation screen is displayed, select Yes and press OK to set.
For best audio Sound mode 1. Display the menu with MENU. 2. Select Sound > Mode and press OK to access. 3. Select the mode and press OK to set. Mode (Standard / Music / Ambience / User) Selects your favourite sound mode for each input. Standard: Provides the suitable sound quality for all types of scenes. Music: Improves sound quality for watching music videos, etc. Ambience: Improves spatial effects and provides clear sounds.
Basic settings 1. Display the menu with MENU. 2. Select Sound and press OK to access. 3. Select one of the following items and press OK to access. Bass / Treble / Equaliser / Balance / Surround / Bass Boost 4. Set the item and press OK to store. Bass Adjusts level to enhance or minimise lower, deeper sound output. Treble Adjusts level to enhance or minimise sharper, higher sound output. Equaliser Adjusts the frequency level to suit your favourite sound quality.
Bass Boost (On / Off) Enhances the effect of bass sounds. ●● This function is effective only for the sound from TV speakers.
Volume settings 1. Display the menu with MENU. 2. Select Sound and press OK to access. 3. Select one of the following items and press OK to access. Speaker Selection / TV Speaker Setting / Headphone Volume / Auto Gain Control / Volume Correction / Speaker Distance to Wall 4. Set the item and press OK to store. Speaker Selection (TV / Home Cinema) Enables controlling the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. TV: TV speakers are active.
Auto Gain Control (On / Off) Automatically regulates large sound level differences between channels and inputs. Volume Correction Adjusts the volume of each individual channel or input mode. Speaker Distance to Wall (Up to 30cm / Over 30cm) Compensates for the low frequency sound due to the distance between the speakers and the wall. ●● If the back space between the TV and wall is within 30 cm, Up to 30cm is recommended.
Voice Guidance Settings 1. Display the menu with MENU. 2. Select Sound > Voice Guidance Settings and press OK to access. 3. Select one of the following items and press OK to access. Voice Guidance / Speed / Volume / User Level / Web Browser 4. Set the item and press OK to store. Voice Guidance (On / Off) Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users.
Audio Description 1. Display the menu with MENU. 2. Select Sound > Audio Description and press OK to access. 3. Select one of the following items and press OK to access. Preferred Audio Type / Volume / Speakers / Headphones 4. Set the item and press OK to store. Preferred Audio Type (Audio Description / Standard) Narration settings for visually impaired users Set to Audio Description to activate the narration sound track when available on the broadcast.
Advanced settings 1. Display the menu with MENU. 2. Select Sound and press OK to access. 3. Select one of the following items and press OK to access. NICAM / Audio Preference / SPDIF Selection / PCM Optical Level / SPDIF Delay / HDMI Input 4. Set the item and press OK to store. NICAM (On / Off) Near Instantaneous Companded Audio Multiplex Reproduces NICAM stereo sound. ●● Set to Off if reception is poor.
Auto: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as Dolby Digital Bitstream. MPEG is output as PCM. PCM: Digital output signal is fixed to PCM. ●● ARC (Audio Return Channel) is a function of digital audio output using HDMI cable.
TV Guide Freeview EPG (UK) Using the Freeview EPG enables you to select a programme easily, view programme information, etc. ●● For DVB (UK only) 1. Select DVB with TV. 2. Display TV Guide with GUIDE. (Example) TV screen Date and time Programme Channel position and name ●● To watch the programme 1) Select a programme and press OK to access. 2) Select Watch now and press OK to watch. – To use Timer Programming, select Record.
●● To jump to the currently selected channel (green) ●● To view more details of the programme 1) Select the programme. 2) Press to view. – Press again to return to TV Guide. ●● To exit TV Guide EXIT = Note = ●● For Freetime EPG, follow the on-screen instructions. (Freesat) ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use the Freeview EPG. You can update the software later manually.
TV Guide (Ireland) TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcaster). ●● Not valid in Analogue ●● Ireland only 1. Select the mode with TV. DVB / Satellite 2. Display TV Guide with GUIDE. (Example) TV screen Date Time Programme Channel position and name ●● To watch the programme 1) Select the current programme and press OK to access.
●● To search programme titles and view a list of the searched programmes (if available) 1) Display the search list with (yellow). 2) Select Search and press OK to access. 3) Enter characters with Cursor buttons or Numeric buttons, and press OK to set. 4) Press (green) to start searching. – All the programme titles including the word you set are listed. – Searching without any characters lists all programmes including current programmes.
Timer Programming This function allows you to select programmes that you want to record to the USB HDD. 1. Display TV Guide with GUIDE. 2. Select the forthcoming programme and press OK to access. 3. Select Record and press OK to set. (UK only) – You can also set a timer event pressing ●● . To check / change / cancel a timer event Recording > Timer Programming > Editing Timer Programming ●● LED turns to orange in Standby mode when Timer Programming is set.
Guide link programming Guide link programming is Timer Programming which is controlled by information from the TV Guide; if programme start and end times are changed by the broadcaster, the timer event will follow the change. ●● UK only ●● is displayed on the timer event if the timer is set from the TV Guide.
Teletext Digital text service Digital text services (MHEG) differ greatly from analogue teletext. When you switch to a digital text service, the images you see can contain graphics and text, laid out and controlled in a manner decided by the broadcaster. 1. Select Freesat (UK only) / DVB with TV. ●● DVB programmes may have digital text services (MHEG). 2. Switch to a digital text service with TEXT.
Viewing Teletext 1. Switch to teletext with TEXT. ●● Displays the index page (content varies depending on the broadcaster). ●● Current / sub page numbers are displayed on the top left of the screen. ●● Time / date is displayed on the top right of the screen. ●● Colour bar is displayed on the bottom of the screen. 2. Select the page with Cursor buttons, Numeric buttons or (coloured buttons). ●● To adjust contrast 1) Press MENU twice to display Contrast. 2) Adjust and press OK to set.
■■Store frequently viewed pages in the colour bar (List mode) 1. Press (coloured buttons) while the page is displayed. 2. Press and hold OK. ●● The stored page number changes to white. ●● If you use subtitles, do not change number on ●● To change stored pages 1) Press (blue). (coloured buttons) to change. 2) Enter a new page number with Numeric buttons. 3) Press and hold OK. ■■View sub page The number of sub pages is displayed on the top of the screen. Press to view sub page.
Teletext mode Teletext services are the text information provided by the broadcaster. ●● The features may vary depending on the broadcaster. ●● The availability of teletext services for a programme is indicated by TEXT in the information banner. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Teletext and press OK to access. 3. Select FASTEXT / List and press OK to set. ■■FASTEXT mode In FASTEXT mode, four differently coloured subjects are situated on the bottom of the screen.
Teletext Character Set Selects teletext language font. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Teletext Character Set and press OK to access. 3. Select the font and press OK to set. West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc. East2: Czech, Hungarian, Lettish, Polish, Rumanian, etc.
3D Note ●● Display the image (TV, external input, etc.) full-screen for viewing 3D. ●● If the room is lit by fluorescent lights (50 Hz) and light appears to flicker when using the 3D Eyewear, switch off the fluorescent light. ●● Do not apply pressure on or scratch the lens of the 3D Eyewear. ●● 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
Viewing 3D You can enjoy viewing 3D images of content or programmes supporting 3D effects by wearing the 3D Eyewear. ●● This TV supports Frame Sequential, Side by Side and Top and Bottom 3D formats. – Frame Sequential is the 3D format that the images for right and left eyes are recorded with high definition quality and alternately played back. ●● 3D content in 4K format is not supported. 1. Turn the 3D Eyewear on and put it on.
■■3D photos and 3D videos taken by 3D-compatible Panasonic products ●● Available in Media Player and Network services Media Player Network ■■2D images converted to 3D ●● Set to 2D→3D mode in 3D Mode Selection. Watching > 3D > 3D Mode Selection ●● Content in 4K format cannot be converted to 3D mode.
3D Mode Selection You can change the viewing mode for 3D image. 1. Display the menu with MENU. 2. Select Picture > 3D Settings > 3D Mode and press OK to access. 3. Select the mode and press OK to set. ●● Items for 3D Mode Selection vary depending on the condition. Original: Displays the source image as it is. ●● Use to identify the format type of the source image. Watching > 3D > Source image format Side by Side - 3D / Top and Bottom - 3D: Displays the mode you select.
3D Settings 1. Display the menu with MENU. 2. Select Picture > 3D Settings and press OK to access. 3. Select one of the following items and press OK to access. 3D Mode / 2D→3D Depth / 3D Adjustment / L/R Picture Swap / Safety Precautions 4. Set the item and press OK to store. ●● To exit the menu screen EXIT 3D Mode Selects the 3D format manually. Watching > 3D > 3D Mode Selection 2D→3D Depth (Max / Mid / Min) Selects a level of 3D-image depth for viewing converted 2D images.
Safety Precautions Displays the precautions for viewing 3D images. = Note = ●● Display the image (TV, external input, etc.) full-screen to use this function completely.
Source image format If the picture appears to be abnormal, refer to the table of images that can be seen for each 3D Mode Selection and each source image format, and select the correct 3D mode. ●● 3D images are displayed correctly with the appropriate 3D formats shown in the yellow boxes below.
Tuning and editing channels Setting menu You can retune channels, create your favourite channel lists, skip unwanted channels, etc. 1. Select the mode with TV. Freesat (UK only) / DVB / Analogue / Other Sat. (UK only) / Satellite (Ireland only) 2. Display the menu with MENU. 3. Select Setup > Tuning Menu and press OK to access. Freesat Tuning Menu / DVB Tuning Menu / Analogue Tuning Menu / Other Sat. Tuning Menu / Satellite Tuning Menu ●● The menu name varies depending on the TV mode. 4.
Favourites Edit ■■List favourite Other Sat. / Satellite channels Create your favourite channel lists from various broadcasters (up to 4: Favourites 1 to 4). The Other Sat. / Satellite favourites lists are available for switching in the information banner. Watching > Basic > Information banner ●● To change the category, press ●● To add consecutive channels to the list at once 1) Press (blue). (yellow). 2) Make the channel block and press OK to add.
■■Edit DVB favourites list You can edit the favourites list while the cursor is on the channel in the favourites list. ●● To move the channel 1) Select the channel. 2) Press (green). 3) Select the new position with Cursor buttons or select the turn with Numeric buttons. 4) Press ●● (green) to store. To delete the channel 1) Select the channel. 2) Press OK to delete. – Press ●● (yellow) to delete all channels. To name the favourites 1) Press (red).
Channel List ■■Skip unwanted Freesat / DVB / Analogue channels You can hide (skip) unwanted channels. The hidden channels cannot be displayed except in this function. 1. Select Channel List and press OK to access. 2. Select a channel. 3. Press OK to set Reveal / Hide (skip). : Reveal : Hide (skip) ●● To reveal all channels (if available) (yellow) ■■Edit DVB / Analogue Channels ●● To swap the channel position number (logical channel number) 1) Press (green) to edit.
■■Create the channel list for Other Sat. / Satellite Create your channel list of Other Sat. / Satellite for viewing from all the found channels to exclude the duplicated channels or to reduce the number of channels. And then you can select your desired channels easily. 1. Select a channel to list from Channels Found. ●● To change the category (red) 2. Press OK to add it to Channels for Viewing. ●● To add consecutive channels to the list at once 1) Press (yellow).
Regional Channel Edit You can replace some regional channels with the available channels from another region channel (if available). 1. Select a channel to replace from Freesat Regional Channels. 2. Select a channel to be replaced from Alternative Regional Channels.
Auto Setup Automatically retunes the channels received in the area. ●● This function is available if channel tuning is already performed. ●● Only the selected mode is retuned. All the previous tuning settings are erased. ●● Child Lock PIN number is required to retune locked channels. Functions > Child Lock > PIN number ●● If tuning has not been done completely, set Manual Tuning. Watching > Tuning and editing channels > Manual Tuning – For DVB, Analogue, Other Sat.
■■Other Sat. / Satellite ●● To use dual tuner function, set Dual Tuner Mode to On. 1. Select Auto Setup and press OK to access. 2. Select the satellite. ●● Select IN 1 / IN 2 in Signal Input to set for each tuner. ●● Selectable satellites are Astra2/Eurobird, Astra1 and Hotbird. ●● Check the dish alignment for the satellite to select. – The Freesat channel uses Astra2 at 28.2° East and Eurobird1 at 28.5° East satellites.
■■Auto Setup using the buttons on the TV 1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to display the menu. 2. Set Auto Setup with following control panel buttons.
Channel Sorting by Region You can sort DVB channels so that those with the best signal quality, or those for your preferred region, appear nearer the top of your channel list. (UK only) 1. Select the region and press OK to access. 2. Select repeatedly until you reach the available region. ●● Normally, you should select Best signal quality (All Regions). ●● If you choose to select your preferred region, you could find channels with a weaker signal appear nearer the top of your channel list.
Manual Tuning ●● Normally use Auto Setup or Update Channel List to retune DVB channels. ●● If tuning has not been done completely or for adjusting the direction of the aerial, use this function. (DVB) ●● All DVB channels found are added to Channel List. ■■DVB (UK only) 1. Select Frequency. 2. Press OK to search. ●● All channels found are added to Channel List. ■■DVB (Ireland only) 1. Select a channel and adjust frequency for each channel.
■■Other Sat. / Satellite Set tuning parameters for the required satellite, details can usually be found in a satellite TV magazine. ●● Normally use Auto Setup or Add New Channels to retune Other Sat. / Satellite channels. ●● Please consult the received satellite broadcasting companies for the setting.
Update Channel List By updating the DVB channel list, you can add new channels, delete removed channels or change channel names and positions automatically. ●● The channel list is updated while keeping your settings in Favourites Edit, Channel List, Child Lock, etc. ●● Depending on the signal condition, the update may not work properly.
New Channel Message Selects whether to give a notification message when a new DVB channel is found or not. ●● When a notification message appears, you can perform Update Channel List pressing OK.
Signal Condition Selects a channel and checks the signal condition with indicators. ●● A good Signal Strength is not an indication of suitable signal reception. ●● Vertical lines show the maximum signal value of the selected channel.
Add New Channels You can add any new channels found automatically to channel list. 1. The signal condition is displayed and press OK to access. ●● If you select Any Satellite in Auto Setup, this step is skipped. ●● It takes a while to check the connection for your selected satellite. ●● Ensure that the Signal Lock status is shown as Locked. If it is not locked, the search cannot be executed.
Other settings Add TV Signal Adds the TV mode. ●● This function is available if you skip any modes to tune in Auto Setup for first using the TV.
Recording USB HDD setup Preparations You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. ●● Prepare the USB HDD for the exclusive use of recording with this TV. ●● Connect the USB HDD to the USB 3 port with the USB cable. ●● Be sure to connect the USB HDD to the mains socket. ●● To remove the USB HDD safely from the TV, perform Safely remove USB in USB Device Setup.
●● The data recorded on the USB HDD with this TV can only be played back on this TV. You cannot play back its content with another TV (including the TV of the same model number) or any equipment. ●● Do not turn the TV off, pull out the mains plug or remove the USB HDD during operation (formatting, recording, etc.). Doing so may cause malfunction of the device or damage the recorded data. (An electric outage may also be a cause of malfunction.
Setting for USB HDD Format and set up the USB HDD with this TV in order to use it for recording. All the USB devices recognised as a mass storage device are listed. ●● Please note that USB HDD will be formatted and all data in it will be erased after this setup. ●● Before setting, connect the USB HDD and be sure to turn on the USB HDD. Recording > USB HDD setup > Preparations 1. Display the menu with MENU. 2. Select Setup > USB Device Setup and press OK to access. 3.
●● Mode of the USB HDD : The USB HDD is available for recording / playing back. Only one USB HDD on the list is available for recording. : The USB HDD is available for playing back. ●● To change the mode OK ●● To edit USB HDD name (green) ●● To format (red) ●● To remove the USB HDD safely from the TV (yellow) = Note = ●● You can only select one USB HDD for recording at a time. ●● You cannot change the settings for the USB HDD while recording is in progress.
Recording current programme One Touch Recording Records the current programme to the USB HDD immediately. ●● Confirm the remote control code is “73”. Watching > External equipment > Operating with TV’s remote control 1. Display the menu with MENU. 2. Select Setup > Recording Setup > One Touch Recording and press OK to access. 3. Select the maximum recording time 30 / 60 / 90 / 120 / 180 (minutes) and press OK to set. ■■To start One Touch Recording Press to start.
Timer Programming Setting Timer Programming This function allows you to select programmes that you want to record to the USB HDD. ●● Not valid in Analogue 1. Select the mode with TV. Freesat (UK only)/ DVB / Other Sat. (UK only)/ Satellite (Ireland only) 2. Display the menu with MENU. 3. Select Timer > Timer Programming and press OK to access. 4. Press OK to start making the settings. USB HDD Rec.: Records the programme to the USB HDD. 5. Select and set the item (channel, date, start time, end time).
(Example) !: Overlapped timer events Function (USB HDD Rec.) TV mode ●● For UK ●● For Ireland : Freesat D: DVB : DVB S: Satellite : Other Sat. – You cannot change the mode within the menu. Channel position, channel name, etc.
Editing Timer Programming 1. Display the menu with MENU. 2. Select Timer > Timer Programming and press OK to access. 3. Select the event. ●● To change a timer event OK – Correct as necessary. Recording > Timer Programming > Setting Timer Programming ●● To delete a timer event 1) Press (red). 2) Press OK to delete. ■■To stop recording 1. Press . 2. Select the programme and press OK to access (when 2 recordings are in progress). 3. Select Yes and press OK to stop.
Remote recording You can set timer programming with the network equipment (smartphone, etc.) from outside the home network. ●● Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● Set TV Anywhere to On. Functions > TV Anywhere > TV Anywhere Settings ●● Additional information about the services may be found on the following website. http://panasonic.
Note ●● TV Guide may also be used to set timer event. Watching > TV Guide > Timer Programming ●● Timer Programming can store up to 15 events. ●● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider. ●● For recording using Timer Programming, the TV must be either on or in Standby. ●● Depending on the progress of recording, analogue channel may not be selected.
Technical information USB HDD ■■USB HDD (for recording the digital TV programmes with this TV) ●● The capacity of USB HDD that works with this TV is from 160 GB to 3 TB. ●● Connect the USB HDD to the mains socket to record and play back properly with this TV. ●● Use the USB HDD formatted with this TV. Recording > USB HDD setup > Setting for USB HDD ●● Regarding performance, not all USB HDDs are guaranteed.
Media Player Using Media Player Information Media Player allows you to enjoy photo, video or music recorded on the SD Card / USB Flash Memory / USB HDD / network device, and content recorded with this TV to the formatted USB HDD. (Example) Photo mode: Still pictures recorded with digital cameras are displayed. Video mode: Moving pictures recorded with digital video cameras and digital video data are played back.
■■To insert or remove the SD Card Gently insert the SD Card with the label surface facing front. Push the centre of the card until a click is heard. (To remove, push it again.) Label surface Cutout ■■To insert or remove the USB Flash Memory Ensure alignment is straight and complete when inserting or removing. ●● To remove the USB Flash Memory safely from the TV, perform Safely remove USB in USB Device Setup. 1) Display the menu with MENU. 2) Select Setup > USB Device Setup and press OK to access.
Selecting device / mode 1. Insert the SD Card or USB Flash Memory to the TV. ●● When you insert the SD Card, Media Player will start automatically. Media Player > Using Media Player > Information ●● To play back content in the USB HDD, ensure the connection and settings are completed. Recording > USB HDD setup ●● To play back content in the network device, ensure the connection and settings are completed. Media Player > Using Media Player > Network device 2. Display Home Screen with HOME. 3.
●● Recorded TV is available for content recorded on the USB HDD with this TV. ●● Select the appropriate device and content for playing back each file. ●● You can use the following buttons during playback. Confirm the remote control code is “73”. Watching > External equipment > Operating with TV’s remote control ■■To change the mode You can switch to another mode of Media Player from the thumbnail view. 1. Display the content selection screen with displayed. (blue) while the thumbnail is 2.
Network device You can enjoy photo, video or music stored in the network devices. ●● To enable this function, connect this TV to your home network. Network > Network connections Network > Network settings ■■How to set User / Password 1. Display the menu with MENU. 2. Select Network > File Sharing Settings > Network Device List and press OK to access. 3. Select the network device and press OK to access. 4. Enter User / Password with Cursor buttons or Numeric buttons and press OK to set.
Sharing file You can share the files between PC and devices connected to this TV. ●● To enable this function, connect this TV to your home network. Network > Network connections Network > Network settings 1. Display the menu with MENU. 2. Select Network > File Sharing Settings > File Sharing Server and press OK to access. 3. Select On and press OK to set. 4. Operate your PC to share the files. ●● For operations, refer to the support information on the following website. http://panasonic.
Photo mode Selecting file Select the file in the thumbnail view and press OK to start playback. : Error display ●● To change the size of photos in the thumbnail view 1) Display the option menu with OPTION. 2) Select Change Size and press OK to change.
Viewing photo ■■Playback ●● To operate Single view : To the previous photo : To the next photo : Stop (return to thumbnail) OK : Slideshow ●● To display / hide the operation guide ●● To rotate 90° (blue) ●● To return to thumbnail BACK/RETURN - 151 -
Sorting photos ■■To sort by folder, recorded date or recorded month 1. Display the view selection in the thumbnail view with (green). 2. Select Folder view / Sort by Date / Sort by Month and press OK to set. Folder view: Displays the thumbnail grouped by folder. ●● Files which are in the root folder are collected to the folder named “/”. Sort by Date / Sort by Month: Displays the thumbnail grouped by the same date or month. ●● ●● The group of the photos without recorded dates is shown as Unknown.
Using Slideshow Slideshow ends when all photos within the current thumbnail are viewed. 1. Select the file from the thumbnail of photos for the first view. 2. Start Slideshow with (red) and OK. ●● To display / hide the operation guide ●● To pause (return to Single view) OK ●● To return to thumbnail BACK/RETURN ●● You can change the back ground music by setting Back Ground Music in Slideshow Settings (see below). ■■Slideshow Settings Set up the settings for Photo mode. 1.
Back Ground Music (Off / Type1 / Type2 / Type3 / Type4 / Type5 / User / Auto) Selects the background music during Photo mode. Type1 - 5: Music files installed on this TV at the factory settings are played back. Auto: Music files stored in the current device are played back. ●● If there is no available music data, no sound is played back. User: Music files in the device registered by yourself are played back.
Video mode Selecting file 1. Select the title in the thumbnail view. : Error display : The file does not support thumbnail view. ●● The preview will start when the title / scene is highlighted in the thumbnail view if it supports a preview. To turn off the preview, set Video Preview to Off. Media Player > Video mode > Video Setup 2. Start playback with ●● ●● (red).
Watching video ■■Playback from the selected scene in the title Playback of the selected scene starts and continues until the end of the title. 1. Select the title and press OK to access. 2. Select the scene. 3. Start playback with (red). ●● The structure of titles and scenes may vary depending on the digital video camera used. ●● Playback may not continue depending on the condition.
●● To change aspect 1) Display Aspect Selection with ASPECT. 2) Select the mode and press OK to set. Aspect1: Displays the content in original size. Aspect2: Displays the content enlarged without distortion. – You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) – Aspect cannot be changed depending on the content.
Video Setup Set up the settings for Video mode. 1. Display the option menu with OPTION. 2. Select Video Setup with OK. 3. Select one of the following items and press OK to access. Video Preview / Multi Audio / Dual Mono Audio / Subtitle Settings / Repeat ●● Menu items and selectable options vary depending on the content. 4. Set the item and press OK to store. Video Preview (On / Off) Sets to start the preview of the title or scene in the thumbnail view.
Subtitle Text Delay: Adjusts the delay time for the subtitles.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Media Player > Video mode > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection and press OK to access. 3. Select Auto / PCM and press OK to set. SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Recorded TV mode Selecting content ●● For exclusive USB HDD ●● To play back content in the USB HDD, ensure the connection and settings are completed. Recording > USB HDD setup 1. Content list of the selected device is displayed in Recorded TV mode. ●● Remaining capacity of the selected device is displayed on the top right. (This value may not be accurate depending on the condition.) ●● Content list is displayed as All or Not Viewed. All: All the recorded TV programmes are listed.
Watching recorded TV ■■Playback ●● To operate playback : Manual skip – Press to skip forward approx. 30 seconds. – Press and hold to skip backward approx. 15 seconds. : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx. 10 seconds Press and hold / : Search rapidly 3) Jump to the specified time point with OK.
●● To confirm or change the current status (if available) Watching > Basic > AV Options ●● To return to list BACK/RETURN = Note = ●● The recorded content may not be played back properly depending on the progress of recording.
Grouping content 1. Select the content to edit and press (blue) to tick in the content list. 2. Display the option menu with OPTION. 3. Select Create Group / Release Group / Exclude from Group / Change Protect Status and press OK to set. Create Group: Create a group of content. Select and tick all the desired content, and then select Create Group. Release Group: Select the created group to release, and then select Release Group. (To release several groups at once, tick all the desired groups.
Deleting content 1. Select the content to edit and press 2. Delete the content with (blue) to tick in the content list. (red). 3. When a confirmation screen is displayed, select Yes and press OK to set.
Chapter List You can start playback from the chapter list you select. 1. Display the chapter list with (yellow). 2. Select the chapter and press OK to start playback. = Note = ●● The chapter list is not displayed while the selected content is being recorded. ●● Depending on the recorded programmes, some playback operations may not work properly.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Media Player > Video mode > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection and press OK to access. 3. Select Auto / PCM and press OK to set. SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Music mode Selecting file 1. Select the folder in the thumbnail view. 2. Start playback with ●● (red).
Playing music ■■Playback of the selected file in the folder 1. Select the folder and press OK to access. 2. Select the file. 3. Start playback with (red). ■■Playback ●● To operate playback : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx.
Music Setup Set up the setting for Music mode. ●● This function is available in the thumbnail view. 1. Display the option menu with OPTION. 2. Select Music Setup > Repeat with OK. 3. Select Off / Folder / One and press OK to set.
Technical information Device handling caution ●● Data modified with a PC may not be displayed. ●● Do not remove the device while the TV is accessing data. Otherwise this can damage the device or TV. ●● Do not touch the pins on the device. ●● Do not subject the device to a high pressure or impact. ●● Insert the device in the correct direction. Otherwise this can damage the device or TV. ●● Electrical interference, static electricity, or erroneous operation may damage the data or device.
SD Card ■■SD Card Use an SD Card which meets SD standards. Failure to do so may cause the TV to malfunction. 2.
USB devices ●● It is recommended to connect the device to the TV’s USB port directly. ●● Some USB devices or USB HUB may not be used with this TV. ●● You cannot connect any devices using a USB card reader. ●● Additional information about the devices may be found on the following website. http://panasonic.net/viera/support (English only) ■■USB Flash Memory USB Flash Memory format: FAT16, FAT32 or exFAT ●● USB HDDs formatted on a PC are not guaranteed to work in Media Player.
Photo format ■■Supported Photo formats ●● JPEG (.jpg, .jpeg, .mpo) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Image resolution (pixel): 8 × 8 to 30 719 × 17 279 ●● DCF and EXIF standards ●● Progressive JPEG is not supported. = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Video format ■■Supported Video formats ●● AVCHD (.mts) Video codec: H.264 Audio codec: Dolby Digital ●● AVCHD Standard Ver. 2.0 (AVCHD 3D, AVCHD Progressive) ●● The data may not be available if a folder structure on the device is modified. ●● AVI (.avi) Video codec: H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9 Audio codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● MP4 (.f4v, .m4v, .mp4) Video codec: H.264, H.
●● ASF (.asf, .wmv) Video codec: MPEG4, VC-1, WMV9 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● Copy-protected files cannot be played back. ●● FLV (.flv) Video codec: H.264 Audio codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video codec: H.264, MPEG4 Audio codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video codec: H.264, MPEG1, MPEG2, VC-1 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3 ●● TS (.mts, .m2ts, .tp, .trp, .ts, .
●● WebM (.webm) Video codec: VP9 Audio codec: Vorbis ■■Supported Subtitles formats ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions. ●● If there are more than one subtitles text files inside the same folder, they are displayed in the following order of priority: “.srt”, “.sub”, “.txt”. = Note = ●● Some files may not be played back even if they fulfil these conditions.
Music format ■■Supported Music formats ●● MP3 (.mp3) ●● AAC / Apple Lossless (.m4a) ●● Copy-protected files cannot be played back. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Copy-protected files cannot be played back. ●● LPCM (.wav) = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Network Internet content Information You can access some specific websites supported by Panasonic, and enjoy internet content such as videos, games, communication tools, etc. from Apps. (Example) ●● A broadband network environment is required to be able to use this function. Ensure the network connections and network settings are completed.
Selecting internet content 1. Display Apps with APPS. ●● For details of Apps Home Screen > Apps ●● Depending on the usage conditions, it may take a while to read all the data. 2. Select the desired item and press OK to access. (Example) ●● To exit Apps EXIT ●● You may operate the internet content with the free cursor and Voice Control function of Touch Pad Controller (supplied). Functions > Voice Control ●● You can connect a keyboard for character input in the applications.
Note ●● If you cannot access the internet content, check the network connections and settings. Network > Network connections Network > Network settings ●● Design and specifications are subject to change without notice. ●● Not all the features of the websites are available. ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use Apps. You can update the software later manually.
DLNA In-House streaming This TV is a DLNA Certified™ product. DLNA® (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. ●● To enable this function, connect this TV to your home network.
●● Twonky “Twonky” is the product of PacketVideo Corporation. To obtain the Installation Guides for installing and setting “Twonky”, visit the website of TwonkyMedia. Additional fees may be charged to obtain server software. = Note = ●● For information about the server software, consult each software company. ●● When server software for the media server is installed on the PC, the data on the PC may be at risk of being accessed by other people.
■■Sharing the content of this TV with another piece of network equipment You can enjoy the content of this TV with another network equipment connected to your home network. Available content: ●● Photo, video or music content of this TV ●● Current digital TV programme ●● TV programmes recorded on USB HDDs with this TV Available network equipment: ●● ●● DLNA Certified VIERA ●● Smartphone, etc.
Using DLNA To use DLNA® features, ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Network connections Internet connection A broadband network environment is required to be able to use internet services. ●● If you do not have any broadband network services, please consult your retailer for assistance. ●● Dial-up internet connections cannot be used. ●● Required speed (effective): at least 1.5 Mbps for SD (Standard Definition) and 6 Mbps for HD (High Definition) picture quality, respectively. If the transfer speed is not enough, content may not be played back properly.
DLNA connection To use DLNA features, you need a home network environment and you can operate the features without a broadband network environment. ●● A broadband network environment is required to be able to use internet services. Network > Network connections > Internet connection ■■Wireless connection (For DLNA and internet service) Built-in wireless LAN (Rear of the TV) Access point Hub / Router Internet environment Smartphone, etc. DLNA Certified media server (PC, etc.
■■Wired connection (For DLNA and internet service) ETHERNET terminal LAN cable (Shielded) ●● Use Shielded Twist Pair (STP) LAN cable. Hub / Router Internet environment DLNA Certified media server (PC, etc.) ■■Wireless connection (For DLNA) TV ●● To use the TV as a wireless access point Network > Network settings > Custom - Wireless Access Point DLNA Certified media server (PC, etc.) Smartphone, etc.
Note ●● Ensure to use a LAN straight cable. ●● Set up and connect equipment required for the network environment. You cannot make such settings on this TV. Read the manual of the equipment. ●● If your modem has no broadband router functions, use a broadband router. ●● If your modem has broadband router functions but there are no vacant ports, use a hub. ●● Ensure that the broadband routers and hubs are compatible with 10BASE-T / 100BASE-TX.
Network settings Network Connection Ensure the connections are completed before starting network setup. Network > Network connections ■■Quick setup - Wireless 1. Display the menu with MENU. 2. Select Network > Network Connection and press OK to access. ●● Confirm the encryption key, settings and position of your access point before starting setup. For details, read the manual of the access point. 3. Select Quick setup and press OK to access.
7. Select Exit and press OK to set. ●● To set manually Network > Network settings > Custom - Wireless ■■Quick setup - Wired 1. Display the menu with MENU. 2. Select Network > Network Connection and press OK to access. 3. Select Quick setup and press OK to access. 4. Automatically setup is done and Network Status is displayed. Network > Network settings > Network Status 5. Select Exit and press OK to set.
Custom - Wireless Ensure the connections are completed before starting network setup. Network > Network connections 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wireless and press OK to access. ●● Confirm the encryption key, settings and position of your access point before starting setup. For details, read the manual of the access point. 3. Select your desired access point and press OK to access. ●● Available Wireless Networks are displayed automatically.
4. Enter the encryption key of the access point and press OK to set. ●● You can set characters using Numeric buttons. ●● Press BACK/RETURN to store. 5. IP/DNS Settings is displayed. Acquire IP Address / Acquire DNS Address ●● Auto is recommended. ●● Available settings are displayed automatically. ●● To set manually, select and set IP Address / Subnet Mask / Default Gateway / DNS Address. Proxy Settings ●● It is not required for normal household use.
6. Select Network Status and press OK to access. Network > Network settings > Network Status 7. Select Exit and press OK to set.
Custom - Wired Ensure the connections are completed before starting network setup. Network > Network connections 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wired and press OK to access. 3. IP/DNS Settings is displayed. Acquire IP Address / Acquire DNS Address ●● Auto is recommended. ●● Available settings are displayed automatically. ●● To set manually, select and set IP Address / Subnet Mask / Default Gateway / DNS Address.
4. Select Network Status and press OK to access. Network > Network settings > Network Status 5. Select Exit and press OK to set. = Note = ●● To deactivate wireless, set Easy Mirroring to Off and confirm the network connection type is set to Wired.
Custom - Wireless Access Point You can use the TV as a wireless access point and connect the network equipment without an access point. ●● Confirm the PIN code, network settings of the equipment before starting setup. For details, read the manual of the equipment. 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wireless Access Point and press OK to access. 3. Select Connect to device in WPS and press OK to access. ●● To set manually, select Change settings (see below).
Network Status Displays and checks the network status (MAC Address, current network settings, etc.). 1. Display the menu with MENU. 2. Select Network > Network Status and press OK to access. 3. Automatically testing is done and Network Status is displayed. Try Again: Performs automatic testing of the network connection for the TV and displays the current status again. Status Details: Displays the detailed network status (SSID, security settings, etc.).
my Home Cloud Settings Sets for an account to enjoy the cloud services. 1. Display the menu with MENU. 2. Select Network > my Home Cloud Settings and press OK to access. 3. Select one of the following items and press OK to access. Setup new account / Edit account / Remove account / Notices 4. Follow the on-screen instructions. Setup new account Set up an account for this TV. Edit account Displays and edits the account status. Remove account Deletes an account from this TV.
VIERA Name Sets your favourite name for this TV. 1. Display the menu with MENU. 2. Select Network > VIERA Name and press OK to access. 3. Enter characters and press OK to set. ●● This name is used as the name of this TV on the screen of the other network equipment. ●● When you use two or more TVs in your network environment, set the names of the TVs for each.
TV Remote App Settings Sets to control the TV with the equipment (smartphone, etc.) connected to your network. 1. Display the menu with MENU. 2. Select Network > TV Remote App Settings and press OK to access. 3. Select one of the following items and press OK to access. TV Remote / Powered On by Apps / Networked Standby / Home Streaming / Device to upload contents 4. Set the item and press OK to store. TV Remote (On / Off) Enables controlling the TV from the network equipment (smartphone, etc.).
●● LED turns to orange in Standby mode when Home Streaming is set to Always. Device to upload contents Selects device to upload content from the network equipment (smartphone, etc.). = Note = ●● This function is not available when the TV is turned off with Mains Power On / Off switch. ●● You need to install the application for controlling VIERA on your smartphone. For information about the application: http://panasonic.
Network Link Settings Sets to control the TV with devices connected to the network. 1. Display the menu with MENU. 2. Select Network > Network Link Settings and press OK to access. 3. Select one of the following items and press OK to access. DLNA Server / Registration Type / Remote Device List 4. Set the item and press OK to store. DLNA Server (On / Off) Enables sharing the TV programme and content of this TV with the network equipment (DLNA Certified VIERA, etc.).
= Note = ●● Depending on the area, this function may not be available. For details, consult your local Panasonic dealer.
TV Anywhere Settings Settings for watching TV or editing timer programming with the network equipment (smartphone, etc.) from outside the home network.
File Sharing Settings File Sharing Server (On / Off) Sets to share the files between PC and devices connected to this TV. Media Player > Using Media Player > Sharing file Network Device List Lists the accessible network devices to play back the content in Media Player.
Mirroring Settings Settings for the mirroring function Functions > Mirroring > Mirroring Settings - 207 -
Do Not Track Setting Sets to notify websites about tracking your browsing activities. 1. Display the menu with MENU. 2. Select Network > Do Not Track Setting and press OK to access. 3. Select Tracking Mode / About Do Not Track and press OK to access. 4. Set the item and press OK to store. Tracking Mode (Mode1 / Mode2 / Mode3) Mode1: Notifies websites that you want to be tracked. Mode2: Notifies websites that you do not want to be tracked. Mode3: Sends no configuration information about tracking.
Software Update Accesses the specific website to update the TV’s software if any updates are available. 1. Display the menu with MENU. 2. Select Network > Software Update and press OK to access. 3. Follow the on-screen instructions.
New Software Message Selects whether to give a notification message when new software is found via network or not. 1. Display the menu with MENU. 2. Select Network > New Software Message and press OK to access. 3. Select On / Off and press OK to set.
Photos Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Viewing photo ■■Playback ●● To operate Single view : To the previous photo : To the next photo : Stop (return to list) OK : Slideshow ●● To display / hide the operation guide ●● To rotate 90° (blue) ●● To return to list BACK/RETURN - 212 -
Using Slideshow Slideshow ends when all photos within the list are viewed. 1. Select the file from the thumbnail of photos for the first view. 2. Start Slideshow with (red) and OK. ●● To display / hide the operation guide ●● To pause (return to Single view) OK ●● To return to list BACK/RETURN ■■Slideshow Settings Set up the settings for photo file operations on this TV. 1. Display the option menu with OPTION. 2. Select Slideshow Settings and press OK to access. 3.
Videos Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Watching video ■■Playback If you have stopped the last playback halfway, a confirmation screen may be displayed to select whether to start from where you stopped last time or from the beginning. ●● To operate playback : Manual skip (if available) – Press to skip forward approx. 30 seconds. : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar / slow playback) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK.
●● To change aspect 1) Display Aspect Selection with ASPECT. 2) Select the mode and press OK to set. Aspect1: Displays the content in original size. Aspect2: Displays the content enlarged without distortion. – You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) – Aspect cannot be changed depending on the content.
Video Setup Set up the settings for video file operations on this TV. 1. Display the option menu with OPTION. 2. Select Video Setup and press OK to access. 3. Select one of the following items and press OK to access. Video Preview / Multi Audio / Monaural Audio / Dual Mono Audio / Subtitle Settings / Repeat ●● Menu items and selectable options vary depending on the content. 4. Set the item and press OK to store.
Subtitle Text Delay: Adjusts the delay time for the subtitles.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Network > Videos > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection and press OK to access. 3. Select Auto / PCM and press OK to set. SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Music Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Playing music ■■Playback ●● To operate playback : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx. 10 seconds Press and hold / : Search rapidly 3) Jump to the specified time point with OK.
Music Setup Set up the settings for music file operations on this TV. 1. Display the option menu with OPTION. 2. Select Music Setup > Repeat with OK. 3. Select Off / Folder / One and press OK to set.
DIGA Recorder Controlling DIGA Recorder Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select DIGA and press OK to access. 4. The screen of the DIGA Recorder is displayed.
Technical information Photo format ■■Supported Photo formats ●● JPEG (.jpg, .jpeg, .mpo) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Image resolution (pixel): 8 × 8 to 30 719 × 17 279 ●● DCF and EXIF standards ●● Progressive JPEG is not supported. = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Video format ■■Supported Video formats ●● AVCHD (.mts) Video codec: H.264 Audio codec: Dolby Digital ●● AVCHD Standard Ver. 2.0 (AVCHD 3D, AVCHD Progressive) ●● The data may not be available if a folder structure on the device is modified. ●● AVI (.avi) Video codec: H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9 Audio codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● MP4 (.f4v, .m4v, .mp4) Video codec: H.264, H.
●● ASF (.asf, .wmv) Video codec: MPEG4, VC-1, WMV9 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● Copy-protected files cannot be played back. ●● FLV (.flv) Video codec: H.264 Audio codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video codec: H.264, MPEG4 Audio codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video codec: MPEG1, MPEG2 Audio codec: Dolby Digital, LPCM ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video codec: H.264, H.
●● WebM (.webm) Video codec: VP9 Audio codec: Vorbis ■■Supported Subtitles formats ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions. ●● If there are more than one subtitles text files inside the same folder, they are displayed in the following order of priority: “.srt”, “.sub”, “.txt”. = Note = ●● Some files may not be played back even if they fulfil these conditions.
Music format ■■Supported Music formats ●● MP3 (.mp3) ●● AAC / Apple Lossless (.m4a) ●● Copy-protected files cannot be played back. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Copy-protected files cannot be played back. ●● LPCM (.wav) = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Functions Info Frame Information Info Frame is a convenient feature to provide you relevant information of the watching programme, recommendations, etc. It is displayed on the edge of screen when you need it. (Example) ●● A broadband network environment is required to be able to use this function fully. = Note = ●● Design and specifications are subject to change without notice.
How to use You can check useful information using Info Frame while watching TV. 1. Press and hold HOME. ●● Info Frame is displayed on the edge of screen. (Example) Current programme information, etc. Relevant information (weather forecast, etc.) Notification message Recommended content (TV programme, internet content, etc.) ●● You can also display Info Frame pressing and holding Touch Pad Controller. ●● To exit Info Frame (HOME) on BACK/RETURN 2.
Settings You can set items for Info Frame. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Info Frame at Power on and press OK to access. 3. Set the item and press OK to store. Info Frame at Power on (On / Off) Displays Info Frame when the TV is turned on.
Voice Control Information Voice Control function allows you to operate the TV (e.g. selecting a channel), search the content from various features, etc. with your speech. ●● A broadband network environment is required to be able to use this function fully. Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● To use this function with Touch Pad Controller, ensure the pairing is completed.
How to use 1. Press of Touch Pad Controller to display the operation guide. ●● You can also display it with saying “Hello television” to the TV (built-in microphone). ●● When a confirmation screen is displayed, read carefully and start Voice Control function. (Example) 2. Say a key word (e.g. my Home Screen) to the microphone while the operation guide is displayed. (Example) ●● The operation guide turns to blue during processing.
■■To turn on the TV using Direct Voice Control function You can turn on the TV with saying “Television power on” to the TV (built-in microphone). ●● Set Direct Voice Control to On to use this function. Functions > Voice Control > Settings ●● The built-in microphone is available in Standby mode only when the human activity sensor detects the person. Functions > Voice Control > Note ●● This function is not available when the TV is turned off with Mains Power On / Off switch.
Settings You can set items for Voice Control function. 1. Display the menu with MENU. 2. Select Setup > Voice Control Settings and press OK to access. 3. Select one of the following items and press OK to access. Speech Detection Level / Direct Voice Control / Terms of Service / Instructions for Voice Control 4. Set the item and press OK to store. Speech Detection Level (High / Standard / Low) Adjusts the sensitivity to recognise your speech.
Note ●● When you start Voice Control function, sound level of the TV becomes low. ●● Voice Control function may not work properly in the following conditions: – Not pronounce clearly and correctly – Volume level of your voice is too loud or too low. – Surrounded by the noise ●● Phrases other than Voice Command may not be recognised. ●● It is recommended to speak within approx. 15 cm from the microphone when using Touch Pad Controller. ●● It is recommended to speak within approx.
Touch Pad Controller Information Touch Pad Controller is designed for the convenient operations, especially, on Home Screen or internet content. You can operate the TV intuitively with this controller. ●● Touch Pad Controller can be used exclusively for controlling this TV. ●● Register the Touch Pad Controller to this TV with Bluetooth wireless technology before using. The registration starts automatically when you press any buttons (except Standby On / Off switch) after installing batteries.
Pairing Perform the registration when Touch Pad Controller is used for the first time. The registration starts automatically when you press any buttons (except Standby On / Off switch) after installing batteries. To register again, take following steps. 1. Display the menu with MENU. 2. Select Setup > VIERA Touch Pad Controller > Pairing and press OK to access. 3. Follow the on-screen instructions. = Note = ●● Place Touch Pad Controller within 50 cm from the TV while registration is in progress.
Identifying controls Standby On / Off switch Volume Up / Down On-screen remote control – Press to display the remote control GUI (Graphical User Interface). – Press again to move the position of GUI. Swipe to select the button. – Press to exit the on-screen remote control. Touch pad – For operations, refer to Operation Guide in the Setup menu. Functions > Touch Pad Controller > Settings Option menu – Easy optional setting for viewing, sound, etc.
Return – Returns to the previous menu / page. Cursor buttons APPS – Displays Apps. = Note = ●● To use Standby On / Off switch, point the controller directly at the TV’s remote control signal receiver because it works with infrared sensors. (You can operate the switch without registration.
Settings 1. Display the menu with MENU. 2. Select Setup > VIERA Touch Pad Controller and press OK to access. 3. Select one of the following items and press OK to access. Pairing / Cursor Sensitivity / Operation Guide 4. Follow the on-screen instructions. Pairing Registers Touch Pad Controller (supplied) to this TV. Functions > Touch Pad Controller > Pairing Cursor Sensitivity (Max / Mid / Min) Adjusts the sensitivity of the cursor. Operation Guide Displays the operation guide of Touch Pad Controller.
TV Anywhere How to use You can watch TV and set timer event with the network equipment (smartphone, etc.) from outside the home network. Smartphone, etc. TV ●● Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings 1. Set TV Anywhere to On. Functions > TV Anywhere > TV Anywhere Settings 2. Connect the device (smartphone, etc.) to the home network and access to the TV.
TV Anywhere Settings 1. Display the menu with MENU. 2. Select Network > TV Anywhere Settings and press OK to access. 3. Select one of the following items and press OK to access. TV Anywhere / Powered on by Swipe & Share / Device ID / Device Password 4. Follow the on-screen instructions. TV Anywhere (On / Off) Enables watching TV and setting timer event with the network equipment (smartphone, etc.) from outside the home network.
Mirroring How to use You can watch display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. Smartphone, etc. TV 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select Mirroring and press OK. 4. Follow the on-screen instructions. ●● Pairing information of the device (smartphone, etc.) is registered once you use this function. ■■Easy Mirroring You can also start the mirroring function from the other devices (smartphone, etc.
Mirroring Settings You can set items for the mirroring function. 1. Display the menu with MENU. 2. Select Network > Mirroring Settings and press OK. 3. Select one of the following items and press OK to access. Easy Mirroring / Powered On by Easy Mirroring / Delete All Pairings 4. Set the item and press OK to store. Easy Mirroring (On / Off) Enables starting the mirroring function from the other devices (smartphone, etc.) without operating the TV.
Multi Window Information Displays two windows at once for viewing the TV programmes or external input (AV / COMPONENT / HDMI) as shown below (example).
How to use You can select a channel while watching another programme or external input. 1. Display Apps with APPS. 2. Select Multi Window and press OK to access. ■■Pre-view (Example) Main screen TV mode / Input mode / Channel position and name (for main screen) TV mode / Input mode (for sub screen) – Press / to select the TV mode / input mode of the sub screen. Current programme information (if available) (for sub screen) – Press / to select the programme of the sub screen.
■■Dual view (Example) Main screen TV mode / Input mode / Channel position and name Sub screen ●● Press – ●● / to select the screen to operate. displays on the screen. To select the sound 1) Display the option menu with OPTION. 2) Select Sound Output and press OK to access. 3) Select Main / Sub and press OK to set. – ●● displays on the screen. To confirm or change the current status OPTION – Menu items and selectable options vary between the main screen and sub screen.
Note ●● This function may not work properly depending on the signal format. ●● Ensure that Dual Tuner Mode is set to On in Tuning Menu to display Freesat or Other Sat. / Satellite both in two windows. ●● Not valid in Analogue ●● Data services are not available in multi window. ●● You cannot change the aspect ratio in multi window. ●● External input mode can only be displayed either on the main screen or sub screen. ●● HDMI is available for the main screen.
VIERA Link “HDAVI Control™” Summary of VIERA Link Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control™” function. VIERA Link (HDAVI Control) connects the TV and the equipment with VIERA Link function, and enables easy control, playback, energy saving, creating home theatre, etc. without complicated settings. Connections to the equipment (DVD Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically.
■■VIERA Link (HDMI connection) ●● Use a fully wired HDMI compliant cable. ●● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment.
■■VIERA Link (HDMI and Audio out connections) ●● Use a fully wired HDMI compliant cable. ●● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. ●● Use a fully wired SCART cable. ●● Use the optical digital audio cable for audio output from the TV.
■■Available features (HDMI and Audio out connections) Player theatre ●● Easy playback ●● Power on Link ●● Power off Link ●● Intelligent Auto Standby ●● VIERA Link Control ●● Speaker Selection Blu-ray Disc theatre ●● Easy playback ●● Power on Link ●● Power off Link ●● Standby Power Save ●● Intelligent Auto Standby ●● VIERA Link Control ●● Speaker Selection Amplifier ●● Power off Link ●● Intelligent Auto Standby ●● Speaker Selection : For equipment which has “HDAVI Control 2 or
■■VIERA Link Control of compatible equipment The following is the maximum number of compatible equipment that can be controlled by VIERA Link Control. This includes connections to equipment already connected to the TV. For example, DVD Player connected to Amplifier which is connected to the TV via an HDMI cable.
Preparations ●● Connect the equipment supporting VIERA Link. ●● For details of VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Use a fully wired HDMI compliant cable. ●● Use a fully wired SCART cable. ●● Set up the connected equipment. Read the manual of the equipment. ●● Set VIERA Link to On in the Setup Menu. ●● Set up the TV. After connection, turn the equipment on and then switch the TV on.
Easy playback Automatic input switching - When the connected equipment is operated, the input mode is switched automatically.
Power on Link Set Power on Link to On in VIERA Link Settings to use this function. When the connected equipment is operated, the TV is automatically turned on. (Only when the TV is in Standby mode.
Power off Link Set Power off Link to On in VIERA Link Settings to use this function. When the TV is set to Standby mode, the connected equipment is also automatically set to Standby. ●● This function will work even if the TV enters Standby mode automatically by auto power standby function.
Standby Power Save Set Standby Power Save to On in VIERA Link Settings to use this function. The power consumption of the connected equipment in Standby mode is controlled higher or lower in synchronisation with the TV on / off state to reduce the consumption. When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption of the connected equipment is automatically minimised.
Intelligent Auto Standby Set Intelligent Auto Standby to On in VIERA Link Settings to use this function. When the TV is on, non-used connected equipment goes into Standby mode automatically to reduce the power consumption. For example, when the input mode is switched from HDMI or when Speaker Selection is changed to TV (except for watching a disc). ●● This function may not work properly depending on the connected equipment. In this case, set to Off.
VIERA Link Control You can control some functions of the connected equipment with this TV’s remote control by pointing at the TV’s signal receiver. 1. Display Apps with APPS. 2. Select VIERA Link and press OK to access. 3. Select VIERA Link Control and press OK to access. 4. Select one of the following items and press OK to access. Recorder / Player / Home Cinema / Video Camera / LUMIX / Digital Camera / Other (The menu of the accessed equipment is displayed. The input mode is changed automatically.
■■If you access non-VIERA Link equipment The type of the connected equipment is displayed. Although you can access the connected equipment, you cannot operate it. Use the remote control of the connected equipment. = Note = ●● If you cannot operate the equipment, check the settings and the equipment. Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Some operations may not be available depending on the equipment. In this case, use the remote control of the connected equipment.
Speaker Selection You can control the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. 1. Display Apps with APPS. 2. Select VIERA Link and press OK to access. 3. Select Speaker Selection and press OK to access. 4. Select TV / Home Cinema and press OK to set. TV: TV speakers are active. Home Cinema: The sound is delivered from theatre speakers. Player theatre, Bluray Disc theatre or Amplifier will be automatically turned on if it is in Standby mode.
Note ●● These functions may not work properly depending on the connected equipment. ●● Image or sound may not be delivered for the first few seconds when the input mode is switched. ●● “HDAVI Control 5” is the newest standard for HDAVI Control compatible equipment. This standard is compatible with conventional HDAVI equipment.
Child Lock Using Child Lock You can lock specific channels / AV input terminals to restrict access to them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. 1. Display the menu with MENU. 2. Select Setup > Child Lock and press OK to access. 3. Enter the PIN number (4 digits) with Numeric buttons. ●● Enter the PIN number twice at first setting. ●● Make a note of the PIN number in case you forget it. 4. Select Child Lock List and press OK to access. 5.
■■Freesat Adult Channels Select Hide to hide channels of the adult genre in EPG and banner. All the timer events of the adult genre are cancelled. = Note = ●● For Freesat ■■Player PIN Control Applies access control for some Digital TV streaming services.
PIN number You can change the PIN number. 1. Select Change PIN and press OK to access. 2. Enter a new PIN number twice with Numeric buttons. = Note = ●● Setting Shipping Condition erases the PIN number and all settings.
Parental Rating To watch the DVB programme that has rating information on the selected age, enter the PIN number (depending on the broadcaster). 1. Select Parental Rating and press OK to access. 2. Select an age for the restriction of programmes and press OK to set. = Note = ●● Setting Shipping Condition erases the PIN number and all settings.
Common Interface Caution If the encrypted message is displayed on the screen, the correct Common Interface (CI) Module and smart card that are required for this service are not inserted. ■■How to insert CI module and smart card ●● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ●● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module.
Using Common Interface The Common Interface Module menu provides access to software contained in Common Interface (CI) Modules. ●● Video and audio signals may not be output depending on the broadcast or service. ■■Insert the CI module (optional) ●● Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels do not appear, perform the below to verify the card is recognised by the TV.
Shipping Condition Shipping Condition Resets the TV to its original condition (i.e. no channels tuned in). All settings other than USB Device Setup are reset (channels, picture, sound settings, etc.). 1. Display the menu with MENU. 2. Select Setup > System Menu > Shipping Condition and press OK to access. 3. When a confirmation screen is displayed, select Yes and press OK to set. 4. Follow the on-screen instructions. ●● Auto Setup automatically starts. = Note = ●● To retune TV channels only (e.g.
Updating the TV Software Information A new version of software may be released for download to enhance the performance or operations of the TV. In DVB, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. ●● To install new software, select Standby / Now and press OK to set. Standby: Installs new software in standby condition. Now: Installs new software now.
Auto update You can update new software automatically. 1. Display the menu with MENU. 2. Select Setup > System Menu > System Update > Auto Update Search in Standby and press OK to access. 3. Select On and press OK to set. ●● If any software updates are available, a notification message will appear. To install new software, select Standby / Now and press OK to set. Standby: Installs new software in standby condition. Now: Installs new software now.
Manual update You can update new software manually. 1. Display the menu with MENU. 2. Select Setup > System Menu > System Update > System Update Search Now and press OK to access. 3. Searches for an update (for several minutes) and displays a corresponding message if any. 4. Download with OK. = Note = ●● Download may take a few hours. ●● During software download and update, DO NOT perform any operations on the TV or switch Off the TV.
Setting characters Using Numeric buttons You can enter characters for free input items using Numeric buttons. Press Numeric buttons repeatedly until you reach the desired character. :.@/1!:#+-*_()“‘%&?,;=$[]~<>{}|`^\ :abc2ABC :def3DEF :ghi4GHI :jkl5JKL :mno6MNO :pqrs7PQRS :tuv8TUV :wxyz9WXYZ : Space 0 ●● The character is set automatically if you leave for 1 second. ●● You can also set the character pressing OK or other Numeric buttons less than 1 second.
Bluetooth devices Bluetooth Setup You can use Bluetooth keyboards and mouse with this TV by setting Bluetooth Setup in the Setup Menu. : HID (Human Interface Device Profile) compliant keyboards / mouse can be used. ●● Additional information about the devices may be found on the following website. http://panasonic.net/viera/support (English only) 1. Display the menu with MENU. 2. Select Setup > Bluetooth Setup > Devices and press OK to access. Devices Searches the available device and displays the status.
Keyboard Keyboard ●● Keyboards requiring the drivers are not supported. ●● To change the language type, set Keyboard Layout. 1) Display the menu with MENU. 2) Select Setup > System Menu > Keyboard Layout and press OK to access. 3) Select the language and press OK to set. ●● Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboard layout setting. ●● Some of the keys of keyboards may correspond to the operation of the remote control.
Settings Setting menu How to use Various menus allow you to make settings for the picture, sound, and other functions. 1. Display the menu with MENU. ●● Displayed items vary depending on the input signal. 2. Select the menu and press OK to access. 3. Select the items and press OK to access. ●● Only available items can be selected. ●● You can also access from eHELP pressing available).
●● To exit the menu screen EXIT ●● To return to the previous screen BACK/RETURN = Note = ●● Menu items and selectable options vary depending on the mode (TV mode, Media Player, Network services, etc.). ●● Some settings in Picture menu may also affect the menu screen when watching content in 4K format. ●● If Demo Settings is displayed in the Setup Menu, the TV is in “Shop” viewing environment. To return to “Home” viewing environment, initialise all settings by accessing Shipping Condition.
Picture Viewing Mode Selects your favourite picture mode for each input.
Basic settings Backlight, Contrast, Brightness, Colour, Tint, Sharpness Adjusts the levels of these options according to your personal preference. Watching > For best picture > Basic settings ●● Sharpness is not available when 1080p Pixel by 4pixels is set to On. Colour Temperature Sets the overall colour tone of the picture (bluer - redder). Watching > For best picture > Basic settings Vivid Colour (On / Off) Automatically adjusts colours to vivid ones.
●● For photo content ●● Not valid when Viewing Mode is THX mode Adaptive Backlight Control Automatically controls the level of backlight according to the images. Watching > For best picture > Basic settings Resolution Remaster (Auto / Max / Mid / Min / Off) Enhances picture resolution to make the image sharper. Watching > For best picture > Basic settings Dynamic Range Remaster (On / Off) Enhances bright areas of the image closer to the original luminance making improved picture impact.
24p Smooth Film (Max / Mid / Min / Off) Automatically compensates the picture frame rate to make the 24p source movie images smooth. Watching > For best picture > Basic settings ●● This function is available only for 24p signal input and displayed instead of Intelligent Frame Creation. ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On.
Ambient Sensor Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting condition.
Noise reduction settings Noise Reduction (Auto / Max / Mid / Min / Off) Reduces unwanted picture noise. Watching > For best picture > Noise reduction settings ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On. MPEG Remaster (Auto / Max / Mid / Min / Off) Reduces flicker noise in contoured parts of a picture and block noise.
Advanced Settings You can adjust and set up the detailed picture settings. Watching > For best picture > Advanced Settings This function is available when Viewing Mode is set to Cinema, True Cinema, Custom or Professional1 / 2.
Option Settings Game Mode (On / Off) Provides suitable images for fast response signals when playing games. Watching > For best picture > Option Settings ●● Not valid in TV mode Film Cadence Mode (On / Off) Improves vertical resolution for movie images. Watching > For best picture > Option Settings ●● This function is available for interlaced signals (except in the mode of multi window, Network services or when Game Mode is set to On).
●● For HDMI ●● Not all image may be displayed as pixel by pixel precisely. ●● Not valid in the following conditions: – 3D – Multi window HDMI Content Type (Graphics / Photos / Auto / Off) Adjusts the picture settings of each HDMI input according to the selected content type. Watching > For best picture > Option Settings ●● For HDMI HDMI RGB Range (Auto / Full / Normal) Adjusts the black level of the image for each HDMI input.
Screen Settings 16:9 Overscan (On / Off) Selects the screen area displaying the image for 16:9 aspect. Watching > For best picture > Screen Settings ●● Not valid in the following conditions: – 4K content – Photo content – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On. – Multi window Zoom Adjustments Adjusts the vertical position and size when aspect is set to Zoom.
3D Settings 3D Mode Selects the 3D format manually. Watching > 3D > 3D Mode Selection 2D→3D Depth (Max / Mid / Min) Selects a level of 3D-image depth for viewing converted 2D images. Watching > 3D > 3D Settings 3D Adjustment (On / Off) Adjusts the 3D effect (except in 2D→3D mode). Watching > 3D > 3D Settings L/R Picture Swap (L/R (Normal) / R/L (Reversed)) Swaps pictures for left eye and right eye (except in 2D→3D mode).
Lock Settings Locks the settings of Professional1 / 2 for each input.
Copy Adjustment Copies the picture settings of True Cinema, Custom, Professional1 or Professional2 to those of the other input mode or Viewing Mode.
Reset to Defaults Resets the current Picture Viewing Mode to the default settings.
Sound Mode Selects your favourite sound mode for each input.
Basic settings Bass Adjusts level to enhance or minimise lower, deeper sound output. Watching > For best audio > Basic settings Treble Adjusts level to enhance or minimise sharper, higher sound output. Watching > For best audio > Basic settings Equaliser Adjusts the frequency level to suit your favourite sound quality. Watching > For best audio > Basic settings Balance Adjusts volume level of right and left speakers.
Volume settings Speaker Selection (TV / Home Cinema) Enables controlling the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. Watching > For best audio > Volume settings ●● This function is available when the theatre speakers supporting VIERA Link function is connected to this TV. TV Speaker Setting (TV Speaker / Headphone / Off) Selects the sound output to adjust volume. Watching > For best audio > Volume settings Headphone Volume Adjusts the volume of headphones.
Voice Guidance Settings Voice Guidance (On / Off) Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users. Watching > For best audio > Voice Guidance Settings ●● Not valid in multi window mode Speed (Fast / Normal / Slow) Selects the readout speed for the voice guidance. Watching > For best audio > Voice Guidance Settings Volume (Max / Mid / Min) Selects the volume for the voice guidance.
Audio Description Preferred Audio Type (Audio Description / Standard) Narration settings for visually impaired users Watching > For best audio > Audio Description ●● For DVB ●● Not valid in multi window mode Volume Adjusts the volume for Audio Description. Watching > For best audio > Audio Description ●● For DVB Speakers (Mix / Standard) Set to Mix to activate the description sound track from TV speakers.
Advanced settings NICAM (On / Off) Near Instantaneous Companded Audio Multiplex Reproduces NICAM stereo sound. Watching > For best audio > Advanced settings ●● For Analogue Audio Preference (Multichannel / Stereo / MPEG) Selects the initial setting for audio tracks. Watching > For best audio > Advanced settings ●● For digital ●● Ireland only SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
HDMI Input (Digital / Analogue) Selects to fit the input signal.
Reset to Defaults Resets the current Sound Mode to the default settings.
Network Network Connection Sets the network setting to use this TV in your network environment.
Network Status Displays and checks the network status (MAC Address, current network settings, etc.).
my Home Cloud Settings Sets for an account to enjoy the cloud services.
VIERA Name Sets your favourite name for this TV.
TV Remote App Settings Sets to control the TV from network equipment (smartphone, etc.).
Network Link Settings Sets to control the TV with devices connected to the network.
TV Anywhere Settings You can set timer programming with the network equipment (smartphone, etc.) from outside the home network.
File Sharing Settings File Sharing Server (On / Off) Sets to share the files between PC and devices connected to this TV. Media Player > Using Media Player > Sharing file Network Device List Lists the accessible network devices to play back the content in Media Player.
Mirroring Settings Settings for the mirroring function Functions > Mirroring > Mirroring Settings - 310 -
Do Not Track Setting Sets to notify websites about tracking your browsing activities.
Other settings Software Update Checks for available software updates from the Panasonic website. Network > Network settings > Software Update New Software Message (On / Off) Selects whether to give a notification message when new software is found via network or not.
Timer Off Timer Sets the duration of time until the TV automatically goes into Standby mode.
Timer Programming Sets a timer to record forthcoming programmes.
Time Zone Adjusts the time data.
Auto Standby Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours.
No signal Power off Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes.
Setup Eco Navigation Automatically sets the TV to the most suitable energy-saving mode.
Voice Control Settings Settings for Voice Control function Functions > Voice Control > Settings - 319 -
USB Device Setup Formats the USB HDD or safely removes USB device.
Recording Setup Settings for the recording feature of the USB HDD Recording > Recording current programme > One Touch Recording - 321 -
VIERA Touch Pad Controller Pairing Registers Touch Pad Controller (supplied) to this TV. Functions > Touch Pad Controller > Pairing Cursor Sensitivity (Max / Mid / Min) Adjusts the sensitivity of the cursor. Functions > Touch Pad Controller > Settings Operation Guide Displays the operation guide of Touch Pad Controller.
Bluetooth Setup Settings for the specific devices supporting Bluetooth wireless technology Functions > Bluetooth devices > Bluetooth Setup - 323 -
Child Lock Applies access control for channels or inputs to prevent unwanted access.
Tuning Menu Favourites Edit Creates a list of favourite channels. Watching > Tuning and editing channels > Favourites Edit ●● For DVB, Other Sat., Satellite Channel List Skips unwanted channels or edits channels. Watching > Tuning and editing channels > Channel List Regional Channel Edit Replaces your regional channels with available channels from another region. Watching > Tuning and editing channels > Regional Channel Edit ●● For Freesat Auto Setup Automatically searches for receivable channels.
New Channel Message (On / Off) Selects whether to give a notification message when a new channel is found or not. Watching > Tuning and editing channels > New Channel Message ●● For DVB Signal Condition Checks the signal condition. Watching > Tuning and editing channels > Signal Condition ●● Not valid in Analogue Dual Tuner Mode (On / Off) Set to On to use dual tuner function. Watching > Tuning and editing channels > Auto Setup ●● For Freesat, Other Sat.
Language Preferred Multi Audio Selects the preferred language for digital channel multi audio (depending on the broadcaster). Watching > Basic > Language ●● UK only Preferred Audio 1 / 2 Selects the first and second preferred language for digital channel multi audio (depending on the broadcaster). Watching > Basic > Language ●● Ireland only Preferred Subtitles 1 / 2 Selects the first and second preferred language for digital channel subtitles (depending on the broadcaster).
Display Settings Preferred Subtitle Type (Standard / Hard of Hearing) Selects the preferred subtitle type. Watching > Basic > Subtitle ●● Ireland only Teletext (FASTEXT / List) Selects analogue teletext display mode. Watching > Teletext > Teletext mode Teletext Character Set (West / East1 / East2) Selects teletext language font.
Playing Time Display (On / Off) Set to On to display a time period of continuous use in Game Mode on the top right of the screen every 30 minutes. Watching > External equipment > Watching external input ●● This function is available when Game Mode is set to On. Radio Mode (20 / 15 / 10 / 5 / Off (seconds)) Sets the timer for turning off the screen automatically when a radio channel is selected.
HDCP Setting Select a version of HDCP according to the content you watch. (Auto / 2.2 / 1.
HDMI Auto Setting Set to Mode1 when the image in HDMI input is not displayed properly.
VIERA Link Settings VIERA Link (On / Off) Sets to use VIERA Link functions. Functions > VIERA Link “HDAVI Control™” > Preparations Power on Link (On / Off) Sets to use Power on Link functions. Functions > VIERA Link “HDAVI Control™” > Power on Link Power off Link (On / Off) Sets to use Power off Link functions. Functions > VIERA Link “HDAVI Control™” > Power off Link Standby Power Save (On / Off) Controls the connected equipment to reduce power consumption in Standby.
System Menu Keyboard Layout Selects the language that your USB or Bluetooth Keyboard supports. Functions > Keyboard > Keyboard Shipping Condition Resets all settings to the original condition. Functions > Shipping Condition > Shipping Condition Common Interface Sets to watch encrypted channels, etc. Functions > Common Interface > Using Common Interface System Update Downloads new software to this TV.
Other Settings Power on Channel List (All Channel List / Last) Automatically selects all channels or favourites list in the information banner when the TV is turned on. Watching > Basic > Selecting channel ●● For DVB, Other Sat., Satellite USB Charge in Standby (On / Off) Enables charging from the USB port in Standby mode. ●● Available for charging the rechargeable 3D Eyewear (optional accessory) ●● This function is available when in Standby mode.
Support Help menu Using Help menu 1. Display the menu with MENU. 2. Select Help and press OK to access. 3. Select About Firefox OS / TV Self Test / System Information / Device Information and press OK to access. About Firefox OS Displays the information about Firefox OS. TV Self Test Makes a diagnosis of picture or sound problems. Follow the on-screen instructions. System Information Displays the system information of this TV. Device Information Displays the device information of this TV.
FAQs Picture Before requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of picture problem in TV Self Test. Support > Help menu > Using Help menu If the problem still persists, please contact your local Panasonic dealer for assistance. Auto aspect ●● Auto aspect is designed to provide you with the best ratio to fill the screen. Watching > For best picture > Aspect Control Signal ●● Press ASPECT if you want to change the aspect ratio manually.
●● Is Backlight, Contrast, Brightness or Colour in the Picture Menu set to the minimum? Watching > For best picture > Basic settings ●● Check all required cables and connections are firmly in place. Blurry or distorted image (no sound or low volume) ●● Reset channels. Watching > Tuning and editing channels > Auto Setup There may be red, blue, green and black spots on the screen ●● This is a characteristic of liquid crystal panels and is not a problem.
Digital TV Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs / Some channels cannot be tuned ●● Check the position, direction and connection of the aerial or dish. ●● Check Signal Condition. If the level of Signal Quality is low, the DVB signal is weak.
No programmes shown on TV Guide ●● Check the digital transmitter. ●● Check the digital transmission by contacting Digital UK on 08456 50 50 50 or at the following website. www.digitaluk.co.uk ●● Consult an aerial or dish engineer to check the alignment of your aerial or dish. Cannot find a channel you have previously watched ●● The channel may broadcast for part of the day. ●● Check the channel in the TV Guide. Watching > TV Guide ●● Channel position numbers may be changed by broadcasters.
Analogue TV Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. White spots or shadow image (ghosting) occurs / Some channels cannot be tuned ●● Check the position, direction and connection of the aerial. ●● Weather conditions affect signal reception (heavy rain, snow, etc.), in particular in poor reception areas.
Sound Before requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of sound problem in TV Self Test. Support > Help menu > Using Help menu If the problem still persists, please contact your local Panasonic dealer for assistance. No sound is produced ●● Is “Sound mute” active? Press MUTE to switch sound mute on or off. ●● Is the volume set to the minimum? ●● Check connections and setting of external equipment.
3D Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Cannot view 3D images Cannot register a 3D Eyewear to the TV ●● Has the 3D Eyewear been switched on and set to 3D mode? ●● Check the remaining battery level of the 3D Eyewear. (Battery status is displayed on the screen when the 3D Eyewear is turned on.) When the battery is running low, replace it with a new one.
HDMI Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Sound is unusual ●● Set the sound setting of the connected equipment to “2ch L.PCM”. ●● Check the HDMI Input setting in the Sound Menu. Watching > For best audio > Advanced settings ●● If digital sound connection has a problem, select analogue sound connection.
Network Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Cannot connect to the network ●● Check the LAN cable or wireless LAN is connected properly. Network > Network connections ●● Check the connections and settings. Network > Network connections Network > Network settings ●● Check the network equipment and network environment.
●● Check the connections and settings. Network > Network connections > Internet connection Network > Network settings ●● The server or connected line may be busy now.
Other Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. VIERA Link function does not work and an error message appears ●● Check the connections. Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Turn the connected equipment on and then switch the TV on.
●● Use Touch Pad Controller within approx. 3.2 m from the TV. (The range may be shortened depending on the obstacle between the TV and the controller, or the surrounding environment.) Voice Control function does not work ●● Voice Control function may not work properly depending on the pronunciation, noise and network environment.
Maintenance Care and Cleaning First, remove the mains plug from the mains socket. ■■Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Optional accessories 3D Eyewear ■■3D Eyewear ●● If you need 3D Eyewear, please purchase Panasonic optional accessory. ●● Use Panasonic 3D Eyewear supporting Bluetooth wireless technology for active shutter 3D. ●● For information about 3D Eyewear: http://panasonic.
Wall-hanging bracket ■■Wall-hanging bracket ●● Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. = Warning = ●● Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.
Licence Licence Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. “freesat” is a registered trademark and the “freesat” logo is a trademark of Freesat (UK) Ltd. DVB and the DVB logos are trademarks of the DVB Project. THX and the THX Logo are trademarks of THX Ltd., which may be registered in some jurisdictions. All rights reserved. “RealD 3D” is a trademark of RealD.
x.v.Colour™ is a trademark. HDAVI Control™ is a trademark of Panasonic Corporation. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Speech Powered by Dragon 2002-2015 Nuance Communications, Inc. All rights reserved. “PlayReady” is a trademark registered by Microsoft. Please be aware of the following. (a) This product contains technology subject to certain intellectual property rights of Microsoft.
About the software categorized as (3), please refer to the “About Firefox OS” menu. The software categorized as (4) and (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the “Software License”menu on this product.
Ver.2.
