Model No. English TX-40CX802B TX-50CX802B TX-55CX802B TX-65CX802B Operating Instructions LCD Television For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 17) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use.
● For information about the trademarks, refer to [eHELP] (Support > Licence).
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2014) of digital services. ● Not all the features are available depending on the country, area, broadcaster, service provider and network environment. ● Compatibility with future services is not guaranteed. ● Check the latest information on the available services at the following website. http://panasonic.
● This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. ● Insert the mains plug fully into the mains socket. ● Ensure that the mains plug is easily accessible. ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands. ● Do not damage the mains lead. •• Do not place a heavy object on the lead. •• Do not place the lead near a high temperature object. •• Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.
■■Radio waves Warning ● Do not use the TV and Touch Pad Controller in any medical institutions or locations with medical equipment. Radio waves may interfere with the medical equipment and may cause accidents due to malfunction. ● Do not use the TV and Touch Pad Controller near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with the automatic control equipment and may cause accidents due to malfunction.
■■Battery for the Remote Control / Touch Pad Controller LCD Television Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type. ● Do not mix old and new batteries. ● Do not mix different battery types (such as alkaline and manganese batteries). ● Do not use rechargeable batteries (Ni-Cd, etc.). ● Do not burn or break up batteries. ● Do not expose batteries to excessive heat such as sunshine, fire or the like.
Accessories Remote Control (p. 13) ● N2QAYB001012 Assembling / Removing the pedestal When using the pedestal, this TV is slightly inclined because of the slant design adopted. ssembly screw (4) A (silver) M4 × 8 ssembly screw (4) A (black) Touch Pad Controller M4 × 12 (p. 14) ● N2QBYA000015 Bracket (L) Pedestal (p. 7) Bracket (R) Mains lead (p. 9) Cable tie (2) E Base (p. 12) Batteries ● R6 (2) (For Remote Control) (p. 14) ● R03 (2) (For Touch Pad Controller) (p.
■■Assembling the pedestal 1 B C E B 3 D C Removing the pedestal from the TV D A Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws A from the TV. 2 Lift up the TV at a slight angle from the pedestal as shown. Insert the pedestal at a slight angle into the TV as shown. (View from the side) 3 Remove the assembly screws (View from the side) 2 8 English from the bracket.
Connections 9 Satellite terminal ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. 12 HDMI1 - 2 (p. 10, 11) ● To watch content in 4K format, use HDMI terminal. (p. 11) 10 Terrestrial terminal (p. 10) (p.
Satellite connection ● For Freesat, Other Sat., Satellite ■■DVD Recorder (VCR) / Cable TV box TV ■■Dual Tuner TV Cable Satellite cables Satellite dish ■■Single Tuner TV RF cable SCART cable HDMI cable Terrestrial aerial DVD Recorder / VCR Cable TV box Satellite cable Satellite dish ● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details.
Connections for 4K compatible equipment TV ■■Amplifier (listening with external speakers) ● Use HDMI2 to connect the TV to an amplifier which has ARC (Audio Return Channel) function. If connecting to an amplifier without ARC function, use DIGITAL AUDIO. ● To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For information about the connections, read the manuals of the equipment and amplifier.
Using the cable tie (supplied) TV ● Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image). ● Fix cables with the cable tie as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables. CI module ■■USB HDD (for recording) ● Use USB 3 for connecting the USB HDD. ● For details, refer to [eHELP] (Recording). ■■VIERA Link ● Use HDMI1 - 3 for VIERA Link connection.
Identifying Controls Remote Control 6 OK ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. 9 Sound Mute On / Off 10 Text service button 11 Volume Up / Down 12 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on.
■■Installing / Removing batteries Pull open Hook Close Note the correct polarity (+ or -) Touch Pad Controller Touch Pad Controller is designed for the convenient operations, especially, on Home screen or internet content. You can operate the TV intuitively with this controller. ● Touch Pad Controller can be used exclusively for controlling this TV. ● Register the Touch Pad Controller to this TV with Bluetooth wireless technology before using.
■■Installing / Removing batteries Indicator / Control panel Slide open ● When pressing 6, 7, 8 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight which button has been pressed. 1 6 7 2 3 8 Rear side of the TV Close Note the correct polarity (+ or -) Note ● It is recommended to hold Touch Pad Controller with your hand when using.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 9 - 12) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 15) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
Viewing 3D images You can enjoy viewing 3D images of content or programmes supporting 3D effects by wearing the 3D Eyewear (optional). ● The 3D Eyewear must be worn to view 3D images. ● When using the 3D Eyewear, please also read the manual of the 3D Eyewear. ● This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats. (3D content of 4K format is not supported.) ● For details, refer to [eHELP] (Watching > 3D).
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3) The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p.
Maintenance Specifications First, remove the mains plug from the mains socket. ■■TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Connection terminals AV1 input / output SCART (Audio/Video in, Audio/Video out, RGB in) Receiving systems / Band name Check the latest information on the available services at the following website. http://panasonic.net/viera/support AV2 input (COMPONENT / VIDEO) VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] Y 1.0 V[p-p] (including synchronisation) PB/CB, PR/CR ±0.
■■When using the wall-hanging bracket Operating conditions Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. Temperature 0 °C - 35 °C Humidity ● Holes for wall-hanging bracket installation Rear of the TV 20 % - 80 % RH (non-condensing) Standard compliance and Frequency range* 40-inch model a Built-in wireless LAN 1 IEEE802.11a/n a: 200 mm b 55-inch model 5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
