Model No. English TX-55EZ952B TX-65EZ952B Operating Instructions OLED TV For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 20) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use. The images shown in this manual are for illustrative purposes only.
● For information about the trademarks, refer to [eHELP] (Search by Purpose > Read first > Before use > Licence). The illustration for TX-65EZ952B is used in this manual unless otherwise mentioned. Illustrations shown may be different depending on the model.
Important Notice Do not display any still part of the image for a long period In such cases the still part of the image remains dimly on the screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. ● Typical still image parts: The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content.
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: ● Insert the mains plug fully into the mains socket. ● To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times. Warning ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands.
● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets. ● Do not apply any strong force or impact to the display panel. ● Ensure that children do not climb on the TV. ● Do not place the TV on sloping or unstable surfaces, and ensure that the TV does not hang over the edge of the base.
■ Built-in wireless LAN ■ Moving the TV Caution Caution ● Do not use the built-in wireless LAN to connect to any wireless network (SSID*) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access. *SSID is a name for identifying a particular wireless network for transmission. ● Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.
■ Battery for the Remote Control / Touch Pad Controller Accessories Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type. ● Do not mix old and new batteries. ● Do not mix different battery types (such as alkaline and manganese batteries). ● Do not use rechargeable batteries (Ni-Cd, etc.). ● Do not burn or break up batteries. ● Do not expose batteries to excessive heat such as sunshine, fire or the like.
Assembling / Removing the pedestal Assembly screw (4) Assembling the pedestal 1 M4 × 14 Base Cover (2) B 8 English
3 2 A ● When the TV is uneven horizontal, loosen the assembly screws to set the TV horizontal.
Removing the pedestal 3 Be sure to remove the pedestal in the following procedures when you repack the TV. 1 Remove the cover . 2 Remove the assembly screws 3 Lift the TV from the pedestal. from the pedestal. ■ When using the wall-hanging bracket In addition to removing the pedestal, removing the following back bracket is needed. ● When moving the TV, support the TV as shown in step 1 (p. 8). Preparations Put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.
Connections Terminals 1 ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. 2 10 ● Keep the TV away from electronic equipment (video equipment, etc.
■ Single Tuner Basic connections TV ■ Mains lead AC 220-240 V 50 / 60 Hz Mains lead Cable tie (Bundled the mains lead) To loosen: Satellite cable Satellite dish ● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details. AV devices Keep pushing the knob Knob ■ DVD Recorder / Blu-ray Recorder, etc.
Network A broadband network environment is required to be able to use internet services. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first using the TV. (p.
■ Camcorder / Game equipment (VIDEO equipment) TV ■ Common Interface ● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module. ● Insert or remove the CI module completely in the correct direction as shown. ● Normally encrypted channels will appear. (Viewable channels and their features depend on the CI module.
Cable arrangement Fix the cables using the cable tie, and then attach the terminal cover to the TV. ■ Fixing the cables using the cable tie ● Fix cables as necessary. ● When using the optional accessory, follow the option’s assembly manual to fix cables. Attach the cable tie ■ Attaching the terminal cover Insert the cable tie in a hole Hole Bundle the cables Set the tip in the hooks ● Do not apply load to the terminal cover.
Identifying Controls Remote Control ● Press after selecting channel positions to quickly change channel. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 Netflix ● Accesses NETFLIX service directly. ● A broadband network environment is required in order to fully use this function. ● This service may be stopped or changed without notice. 9 Sound Mute On / Off 10 Text service button 11 Volume Up / Down 12 Numeric buttons ● Changes channel and teletext pages. ● Sets characters.
■ Installing / Removing batteries Pull open Hook Close Note the correct polarity (+ or -) 1 [ Touch Pad Controller The Touch Pad Controller is designed for convenient and intuitive operation, especially with [Home Screen] or internet content. ● Touch Pad Controller can be used exclusively for controlling this TV. ● Register the Touch Pad Controller to this TV with Bluetooth wireless technology before using.
■ Installing / Removing batteries 2 Ambient sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On]. Slide open 3 Power LED Red: Standby Green: On Orange: Standby with some functions (recording, etc.) active or panel maintenance in progress ● The LED blinks when the TV receives a command from the remote control. 4 Input mode selection ● Press repeatedly until you reach the desired mode.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 11 - 15) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 18) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
● To scroll the description (if more than 1 page) While the description is highlighted ● To open the reference screen ( ) ● To display the menu related to the description (only for some descriptions) (red) ● To check the features of this TV Search by Purpose > Read first > Features English 21
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). It takes several seconds to display the image after turning the TV on ● When turning the TV on, the panel adjustment is performed. It is not a malfunction. The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p.
Maintenance Specifications First, remove the mains plug from the mains socket. ■ TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
HDMI 1 / 2 / 3 / 4 input TYPE A Connectors HDMI1 / 3 / 4: 4K, Content Type, Deep Colour, x.v.Colour™ HDMI2: 4K, Content Type, Audio Return Channel, Deep Colour, x.v.Colour™ ● This TV supports “HDAVI Control 5” function. Card slot SD Card slot × 1 Common Interface slot (complies with CI Plus) × 1 PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder M.NTSC Playback from M.
● For information about the power consumption, display resolution, etc., refer to Product fiche. ● For information about the open source software, refer to [eHELP] (Search by Purpose > Read first > Before use > Licence). 3 ■ When using the wall-hanging bracket Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. ● When moving the TV, support the TV as shown in step 1 (p. 8).
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
