TX-55CR730B TX-65CR730B e HELP English
Read first eHELP • How to use 12 Features • 4K resolution 13 • Home Screen 14 • Info Frame 15 • TV Anywhere 16 • Freeview EPG 17 • Easy Mirroring 18 Home Screen Home Screen • Information 19 • How to use 21 • Pin to HOME 22 • Option menu 23 Live TV • How to use 24 • Option menu 25 Apps • How to use 26 • Option menu 27 Devices • How to use 28 • Option menu 29 Watching Basic • Basic connection 30 • Selecting channel 32 • Information banner 34 • AV Options 37 -2-
• Subtitle 39 • Last view 40 • Off Timer 41 • Energy saving functions 42 • Adjusting time 44 • Language 45 4K resolution • 4K compatible equipment 47 • HDCP Setting 48 • HDMI Auto Setting 49 • Valid 4K format 50 External equipment • External connection 51 • Watching external input 55 • Operating with TV’s remote control 57 • HDMI features 59 • Terminal information 61 • Valid input signals 63 For best picture • Viewing Mode 64 • Ambient Sensor 65 • Aspect 66 • Aspect Control
• Voice Guidance Settings 85 • Audio Description 86 • Advanced settings 87 TV Guide • Freeview EPG (UK) 89 • TV Guide (Ireland) 91 • Timer Programming 93 • Guide link programming 94 Teletext • Digital text service 95 • Viewing Teletext 96 • Teletext mode 98 • Teletext Character Set 99 Tuning and editing channels • Setting menu 100 • Favourites Edit 101 • Channel List 103 • Auto Setup 104 • Channel Sorting by Region 105 • Manual Tuning 106 • Update Channel List 107 • New Channel M
• Editing Timer Programming 118 • Remote recording 119 • Note 120 Technical information • USB HDD 121 Media Player Using Media Player • Information 122 • Selecting device / mode 124 • Network device 126 • Sharing file 127 Photo mode • Selecting file 128 • Viewing photo 129 • Sorting photos 130 • Using Slideshow 131 Video mode • Selecting file 133 • Watching video 134 • Video Setup 136 • Audio output settings 138 Recorded TV mode • Selecting content 139 • Watching rec
Technical information • Device handling caution 149 • SD Card 150 • USB devices 151 • Photo format 152 • Video format 153 • Music format 156 Network Internet content • Information 157 • Selecting internet content 158 • Note 159 DLNA • In-House streaming 160 • Using DLNA 163 Network connections • Internet connection 164 • DLNA connection 165 • Note 167 Network settings • Network Connection 168 • Custom - Wireless 170 • Custom - Wired 173 • Custom - Wireless Access Point 175
• Do Not Track Setting 186 • Software Update 187 • New Software Message 188 Photos • Selecting file 189 • Viewing photo 190 • Using Slideshow 191 Videos • Selecting file 192 • Watching video 193 • Video Setup 195 • Audio output settings 197 Music • Selecting file 198 • Playing music 199 • Music Setup 200 DIGA Recorder • Controlling DIGA Recorder 201 Technical information • Photo format 202 • Video format 203 • Music format 206 Functions Info Frame • Information 207 • Ho
TV Anywhere • How to use 214 • TV Anywhere Settings 215 Mirroring • How to use 216 • Mirroring Settings 217 VIERA Link “HDAVI Control™” • Summary of VIERA Link 218 • Preparations 223 • Easy playback 224 • Power on Link 225 • Power off Link 226 • Standby Power Save 227 • Intelligent Auto Standby 228 • VIERA Link Control 229 • Speaker Selection 231 • Note 232 Child Lock • Using Child Lock 233 • PIN number 235 • Parental Rating 236 Common Interface • Caution 237 • Using Common Interface
Keyboard • Keyboard 244 Settings Setting menu • How to use 245 Picture • Viewing Mode 247 • Basic settings 248 • Ambient Sensor 250 • Noise reduction settings 251 • Advanced Settings 252 • Option Settings 253 • Screen Settings 255 • Copy Adjustment 256 • Reset to Defaults 257 Sound • Mode 258 • Basic settings 259 • Volume settings 260 • Voice Guidance Settings 261 • Audio Description 262 • Advanced settings 263 • Reset to Defaults 265 Network • Network Connection 266 • Network Status 26
• Mirroring Settings 274 • Do Not Track Setting 275 • Other settings 276 Timer • Off Timer 277 • Timer Programming 278 • Time Zone 279 • Auto Standby 280 • No signal Power off 281 Setup • Eco Navigation 282 • Voice Control Settings 283 • USB Device Setup 284 • Recording Setup 285 • Child Lock 286 • Tuning Menu 287 • Language 289 • Display Settings 290 • HDCP Setting 292 • HDMI Auto Setting 293 • VIERA Link Settings 294 • System Menu 295 • Other Settings 296 Support Help menu • Using Help menu 297 FA
• Network 305 • Other 307 Maintenance • Care and Cleaning 309 Optional accessories • Wall-hanging bracket 310 Licence • Licence 311 - 11 -
Read first eHELP How to use ■■Meaning of signs OK : Letters enclosed in brackets indicate remote control buttons. Menu : Letters in cyan indicate on-screen display items. : References in this eHELP When the icon ( ) is displayed, you can jump to the page for detailed descriptions pressing Numeric buttons. (red) : Displays the menu related to the description (only for some descriptions) = Note = ●● Design and Specifications are subject to change without notice.
Features 4K resolution You can watch content in 4K format that has twice the horizontal and vertical resolution of the 1080p signal.
Home Screen “Home Screen” is a gateway to the TV programmes, applications and connected devices. It provides you an easy way to access all the features.
Info Frame Info Frame is a convenient feature to provide you relevant information of the watching programme, recommendations, etc. It is displayed on the edge of screen when you need it.
TV Anywhere You can watch TV and set timer event with the network equipment (smartphone, etc.) from outside the home network.
Freeview EPG Using the Freeview EPG enables you to select a programme easily, view programme information, etc.
Easy Mirroring You can watch display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. You can also start the mirroring function from the other devices without operating the TV.
Home Screen Home Screen Information “Home Screen” is a gateway to the TV programmes, applications and connected devices. Home Screen is displayed by pressing HOME and it provides you an easy way to access all the features as shown below (example). Home Screen Live TV – Gateway to TV programmes Home Screen > Live TV Apps – Gateway to various applications (internet content, etc.) Home Screen > Apps Devices – Gateway to connected devices (HDMI equipment, USB device, network device, etc.
= Note = ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use Home Screen. You can update the software later manually.
How to use From Home Screen, you can access all the features such as TV programmes, applications and connected devices. 1. Display Home Screen with HOME. (Example) 2. Select Live TV / Apps / Devices and press OK to access. ●● To watch full-screen TV, select Live TV. (Example) ●● Also refer to on the top right of Home Screen for the operations. ■■Search You can search the content from various features. 1. Display Home Screen with HOME. 2. Select on the top left of Home Screen and press OK to access.
Pin to HOME You can add a shortcut for a frequently used feature on Home Screen. 1. Display Home Screen with HOME. 2. Select Live TV / Apps / Devices and press OK to access. 3. Select a feature (TV programme / application / device). 4. Display the option menu with OPTION. 5. Select Pin to HOME and press OK to set. ●● To remove a shortcut from Home Screen, set Unpin from HOME.
Option menu You can customise Home Screen. 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Unpin from HOME / Move 3. Set the item and press OK to store. Unpin from HOME Remove a shortcut from Home Screen. Move Arranges the position of the icons.
Live TV How to use Live TV is a gateway to the TV programmes. 1. Display Home Screen with HOME. 2. Select Live TV. (Example) 3. Press OK to access.
Option menu 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Pin to HOME / Unpin from HOME / Accessibility / AV Options 3. Set the item and press OK to store. Pin to HOME, Unpin from HOME Adds / removes a shortcut for a frequently used feature on Home Screen. Home Screen > Home Screen > Pin to HOME ●● The label (channel position, channel name, etc.) of shortcut is not updated by broadcasters automatically.
Apps How to use Various applications (internet content, etc.) can be accessed easily from Apps. 1. Display Home Screen with HOME. 2. Select Apps and press OK to access. (Example) ●● To exit Apps EXIT ●● To add a shortcut icon Home Screen > Home Screen > Pin to HOME 3. Select an application and press OK to access. 4. Follow the on-screen instructions. = Note = ●● A broadband network environment is required to be able to use this function fully.
Option menu 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Pin to HOME / Unpin from HOME / Move / Lock / Unlock / Uninstall / Show Info. 3. Set the item and press OK to store. Pin to HOME, Unpin from HOME Adds / removes a shortcut for a frequently used feature on Home Screen. Home Screen > Home Screen > Pin to HOME Move Arranges the position of the applications.
Devices How to use Connected devices (HDMI equipment, USB device, network device, etc.) can be accessed easily from Devices. 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. (Example) ●● To exit Devices EXIT ●● To add a shortcut icon Home Screen > Home Screen > Pin to HOME 3. Select a device and press OK to access.
Option menu 1. Display the option menu with OPTION. 2. Select one of the following items and press OK to access. Pin to HOME / Unpin from HOME / Accessibility / Show Info. 3. Set the item and press OK to store. Pin to HOME, Unpin from HOME Adds / removes a shortcut for a frequently used feature on Home Screen. Home Screen > Home Screen > Pin to HOME Accessibility Guidance settings for visually impaired users Watching > For best audio > Voice Guidance Settings Show Info.
Watching Basic Basic connection Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●● External equipment and cables shown are not supplied with this TV.
■■DVD Recorder (VCR) / Satellite receiver HDMI terminal HDMI cable Satellite receiver Satellite dish / Terrestrial aerial AV1 (SCART) terminal SCART cable RF cable / SCART cable Terrestrial terminal RF cable DVD Recorder / VCR = Note = ●● For details of VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Please also read the manual of the equipment being connected. ●● Keep the TV away from electronic equipment (video equipment, etc.
Selecting channel 1. Select the mode with TV. DVB / Analogue ●● Selectable modes vary depending on the channels stored. 2. Select a channel with Channel Up / Down or Numeric buttons. ●● DVB channel position begins from number 1 upward. Analogue channel position numbers are in the 0 - 99 range. ■■To select a channel using information banner 1. Display information banner with if it is not displayed. 2. Select a channel and press OK to watch while the banner is displayed.
■■To watch pay-TV ●● For details of the encrypted channels Functions > Common Interface > Using Common Interface ●● Consult the operator / broadcaster or CI module manufacturer for more information and conditions of the services.
Information banner Display information banner with ●● . Also appears when changing a channel. (Example) Channel position and name Channel type (Radio, HDTV, etc.) / Encrypted channel ( TV mode ( , ) )/ Programme Start time / End time (except Analogue) Channel position, etc. (Analogue) Progress time indicator of the selected programme (except Analogue) All DVB Channels / All Analogue Channels / Favourites ●● Press (blue) to switch. (DVB) ●● To list favourite channels, set Favourites Edit.
Also in : Same programme available as HD broadcast (UK only) ●● To display the extra information for details STTL: Subtitle service available TEXT: Text service available Multi Audio: Multiple audio available Stereo, Mono, NICAM: Audio mode 1 – 90: Off Timer remaining time Watching > Basic > Off Timer ●● To confirm another tuned channel / ●● To watch the channel listed in the banner OK ●● Information on the next programme (DVB) ●● Extra information (DVB) – Press again to hide the banner.
●● To display the introduction banner for the internet service 1) Display the menu with MENU. 2) Select Setup > Display Settings > Smart Banner and press OK to access. 3) Select On / Off and press OK to set. ●● AD, STTL, TEXT, Multi Audio indications are displayed as available on particular programmes, but may not be available for all individual programmes being broadcast. Display the extra information to confirm availability of these functions.
AV Options Confirm or change the current status. ●● Display the full-screen TV to use this function. 1. Display the option menu with OPTION. 2. Select AV Options and press OK to access. 3. Select one of the following items and press OK to access. Audio Type / Multi Audio / Monaural Audio / Subtitle Language / Teletext Character Set / Teletext Language / NICAM / Volume Correction ●● The function items vary depending on the TV mode and country you select. 4. Set the item and press OK to store.
Subtitle Language Selects the language in which subtitles should appear (if available). ●● This setting is not memorised and it returns to the default setting once you exit the current programme. ●● Not valid in Analogue Teletext Character Set Sets the teletext language font. Watching > Teletext > Teletext Character Set ●● Ireland only Teletext Language Selects between alternative languages for teletext (if available). ●● For DVB (Ireland only) NICAM Switches NICAM sound (if available).
Subtitle ■■DVB Display / hide subtitles (if available) with STTL. ●● To select the preferred subtitle type 1) Display the menu with MENU. 2) Select Setup > Display Settings > Preferred Subtitle Type and press OK to access. 3) Select Standard / Hard of Hearing and press OK to set. – Hard of Hearing provides aids in understanding and enjoyment with digital channel subtitles (depending on the broadcaster). – Ireland only ●● Preferred Subtitles 1 / 2 in Language are given priority.
Last view Switch to a previously viewed channel or input mode easily with LAST VIEW. ●● Press again to return to the current view. = Note = ●● Switching channel may not be available depending on the condition. ●● Watching less than 10 seconds is not reflected in the previously viewed channel or input mode.
Off Timer Turn the TV Standby mode automatically after a fixed period. 1. Display the menu with MENU. 2. Select Timer > Off Timer and press OK to access. 3. Select the time in 15-minute increments and press OK to set. 90 / 75 / 60 / 45 / 30 / 15 / Off (minutes) ●● To cancel, set to Off or turn the TV off. ●● The remaining time is displayed on the bottom right of the screen. ●● When the remaining time is less than 3 minutes, the remaining time will flash on the screen.
Energy saving functions The TV can be eco-friendly using energy-saving functions. The TV goes into Standby mode in the following conditions: ●● Eco Navigation is set to Set to Eco. ●● Off Timer is active. Watching > Basic > Off Timer ●● No operation is performed for 4 hours while Auto Standby is set to On. ●● No signal is received and no operation is performed for 10 minutes while No signal Power off is set to On. = Note = ●● This function does not affect the recording. ■■Auto Standby 1.
■■No signal Power off 1. Display the menu with MENU. 2. Select Timer > No signal Power off and press OK to access. 3. Select On / Off and press OK to set. No signal Power off (On / Off) Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes. ●● A notification message will appear 3 minutes before going into Standby mode. ■■Eco Navigation Automatically sets the TV to the most suitable energy-saving mode.
Adjusting time Adjusts the time data. 1. Display the menu with MENU. 2. Select Timer > Time Zone and press OK to access. 3. Set the item and press OK to store. ●● The time data are corrected based on GMT.
Language 1. Display the menu with MENU. 2. Select Setup > Language and press OK to access. 3. Select one of the following items and press OK to access. Preferred Multi Audio / Preferred Audio 1 / 2 / Preferred Subtitles 1 / 2 / Preferred Subtitles / Preferred Teletext 4. Set the item and press OK to store. Preferred Multi Audio Selects the preferred language for digital channel multi audio (depending on the broadcaster).
Preferred Teletext Selects the preferred language for digital channel teletext service (depending on the broadcaster).
4K resolution 4K compatible equipment You can watch content in 4K format that has twice the horizontal and vertical resolution of the 1080p signal. ●● For details of valid 4K format Watching > 4K resolution > Valid 4K format ●● Connect the 4K compatible equipment to HDMI terminal using a 4K compatible cable and you can watch content in 4K format. ■■4K compatible equipment HDMI terminal HDMI cable 4K compatible equipment ●● Check the terminal type and cable plugs are correct for connection.
HDCP Setting 1. Display the menu with MENU. 2. Select Setup > HDCP Setting and press OK to access. 3. Set the item and press OK to store. HDCP Setting (Auto / 2.2 / 1.4) Select a version of HDCP according to the content you watch. ●● HDCP is a technology of copy protection for digital audio / video content.
HDMI Auto Setting 1. Display the menu with MENU. 2. Select Setup > HDMI Auto Setting and press OK to access. 3. Set the item and press OK to store. HDMI Auto Setting (Mode1 / Mode2) Set to Mode1 when the image in HDMI input is not displayed properly.
Valid 4K format ■■Valid 4K format (HDMI) ●● 4K UHD 3 840 × 2 160 (60p, 50p, 30p, 25p, 24p) – Aspect is fixed to 16:9. ●● DCI 4K 4 096 × 2 160 (60p, 50p, 30p, 25p, 24p) – Actual resolution is 3 840 × 2 160p. – Aspect is fixed to V Full. = Note = ●● The above signals are reformatted for optimal viewing on your display.
External equipment External connection These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment. ●● For details of basic connection Watching > Basic > Basic connection ●● Check the terminal type and cable plugs are correct for connection. ●● External equipment and cables shown are not supplied with this TV.
■■AV devices AV2 (COMPONENT) terminals Component cables DVD Player AV2 (VIDEO) terminals Composite cables Camcorder / Game equipment - 52 -
■■USB devices USB port USB cable USB HDD = Note = ●● It is recommended to connect the device to the TV’s USB port directly. ●● You cannot use two or more of the same kind of USB devices simultaneously except USB Flash Memory or USB HDD. ●● Use USB 3 port for connecting the USB HDD. ●● Some USB devices or USB HUB may not be used with this TV. ●● You cannot connect any devices by using USB card reader. ●● Additional information about the devices may be on the following website. http://panasonic.
■■Headphones Headphone jack M3 stereo mini plug Headphones ●● To adjust volume, set Headphone Volume. Watching > For best audio > Volume settings ●● To select the sound output to adjust volume, set TV Speaker Setting.
Watching external input Connect the external equipment (VCR, DVD, etc.) and you can watch through the input. 1. Display the input selection menu with AV. 2. Select the input mode connected to the equipment and press OK to watch. (The selected mode is displayed on the top left of the screen.) ●● TV receives input signals automatically connecting with SCART when playback starts. – Input signals are automatically identified by the SCART (pin 8) terminal.
■■Input Labels Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in Input Selection, banner, etc. Watching > Basic > Information banner 1. Display the menu with MENU. 2. Select Setup > Display Settings > Input Labels and press OK to access. 3. Set the item and press OK to set. ●● To name each input mode freely, select User input and set characters (maximum 10 characters). ●● To skip the input mode, select Skip.
Operating with TV’s remote control You can operate the content in Media Player / media server, recording functions or the connected equipment with the following buttons of this TV’s remote control.
■■How to change the code Each Panasonic product has its own remote control code. Change the code according to the product for operation. 1. Press and hold Standby On / Off switch during the following operations. 2. Enter the appropriate code as follows with Numeric buttons. ●● Codes for each product and features 70: DVD Recorder, DVD Player, Blu-ray Disc Player 71: Player theatre, Blu-ray Disc theatre 72: VCR 73 (default): Using in USB HDD recording, Media Player, DLNA features or VIERA Link 3.
HDMI features HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using a fully wired HDMI compliant cable.
■■DVI connection If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When using the DVI to HDMI adaptor cable, connect the audio cable to the audio input terminal (use AV2 audio terminals). ●● Enquire HDMI adaptor cable at your local digital equipment retailer shop. = Note = ●● Audio settings can be made on HDMI Input in the Sound Menu.
Terminal information ■■AV1 (SCART) terminal (RGB, VIDEO) 1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 : 9 : 10: 11 : Audio out (R) Audio in (R) Audio out (L) Audio earth Blue earth Audio in (L) Blue in Status CVBS Green earth -Green in 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: - 61 - -Red earth Earth Red in Status RGB CVBS earth RGB status earth CVBS out (video) CVBS in (video) Socket Earth
■■HDMI terminal 1 : TMDS Data2+ 11 : TMDS Clock Shield 2 : TMDS Data2 Shield 12: TMDS Clock− 3 : TMDS Data2− 13: CEC 4 : TMDS Data1+ 14: Utility 5 : TMDS Data1 Shield 15: SCL 6 : TMDS Data1− 16: SDA 7 : TMDS Data0+ 17: DDC/CEC Ground 8 : TMDS Data0 Shield 18: +5V Power 9 : TMDS Data0− 19: Hot Plug Detect 10: TMDS Clock+ - 62 -
Valid input signals ■■COMPONENT, HDMI Signal name COMPONENT HDMI 525 (480) / 60i, 60p ○ ○ 625 (576) / 50i, 50p ○ ○ 750 (720) / 60p, 50p ○ ○ 1 125 (1 080) / 60i, 50i ○ ○ 1 125 (1 080) / 60p, 50p, 24p ○ 3 840 × 2 160 / 60p, 50p, 30p, 25p, 24p ○ 4 096 × 2 160 / 60p, 50p, 30p, 25p, 24p ○ ○: Applicable input signal = Note = ●● Signals other than above may not be displayed properly. ●● The above signals are reformatted for optimal viewing on your display.
For best picture Viewing Mode 1. Display the menu with MENU. 2. Select Picture > Viewing Mode and press OK to access. 3. Select the mode and press OK to set. Viewing Mode (Dynamic / Normal / Cinema / True Cinema / Custom) Selects your favourite picture mode for each input. Dynamic: Improves contrast and sharpness for viewing in a bright room. Normal: Normal use for viewing in a normal lighting condition.
Ambient Sensor 1. Display the menu with MENU. 2. Select Picture > Ambient Sensor and press OK to access. 3. Select On / Off and press OK to set. Ambient Sensor (On / Off) ●● Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting condition.
Aspect Change the aspect ratio (image size) with ASPECT. ■■To change the aspect ratio manually 1. Display Aspect Selection with ASPECT. 2. Select the mode and press OK to set. ●● You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) Auto: The best ratio is selected automatically according to the “Aspect Control Signal”. Watching > For best picture > Aspect Control Signal 16:9: Directly displays the image at 16:9 without distortion (anamorphic).
Aspect Control Signal Programmes usually contain an “Aspect Control Signal”. (Widescreen signal, Control signal through SCART / HDMI terminal) In Auto mode, aspect mode will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI terminal is found. The aspect switches to the appropriate ratio.
●● HDMI terminal Valid input signal format: 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1 125 (1 080) / 60i, 50i 1 125 (1 080) / 60p, 50p, 24p 3 840 × 2 160 / 60p, 50p, 30p, 25p, 24p 4 096 × 2 160 / 60p, 50p, 30p, 25p, 24p ●● HDMI terminal does not receive WSS signal. = Note = ●● If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the tracking of the VCR. Read the manual of the VCR.
Basic settings 1. Display the menu with MENU. 2. Select Picture and press OK to access. 3. Select one of the following items and press OK to access. Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour Temperature / Vivid Colour / Adaptive Backlight Control / Resolution Remaster / Intelligent Frame Creation / 24p Smooth Film 4. Set the item and press OK to store.
Intelligent Frame Creation (Max / Mid / Min / Off) Automatically compensates the picture frame rate and removes juddering movements to make the images smooth. ●● Depending on the content, images may be noisy. To prevent the noise, change the setting. ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On.
Noise reduction settings 1. Display the menu with MENU. 2. Select Picture > Noise Reduction / MPEG Remaster and press OK to access. 3. Set the item and press OK to store. Noise Reduction (Auto / Max / Mid / Min / Off) Reduces unwanted picture noise. ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On.
Advanced Settings You can adjust and set up the detailed picture settings when Viewing Mode is set to Cinema, True Cinema or Custom. The settings in True Cinema or Custom can be stored for each input. Watching > For best picture > Viewing Mode 1. Select the input mode with AV or TV. 2. Display the menu with MENU. 3. Select Picture > Viewing Mode and press OK to access. 4. Select the mode and press OK to set. Cinema / True Cinema / Custom ■■Adjust the detailed picture settings 1.
■■White Balance R-Gain / G-Gain / B-Gain Adjusts the white balance of bright red / green / blue areas. R-Cutoff / G-Cutoff / B-Cutoff Adjusts the white balance of dark red / green / blue areas. More Detailed Adjustment Adjusts more detailed items for White Balance. Input Signal Level: Adjusts the input signal level. R-Gain / G-Gain / B-Gain: Adjusts the detailed white balance of bright red / green / blue areas. Reset to Defaults: Resets items for More Detailed Adjustment.
■■Colour Management R-Hue / R-Saturation / R-Luminance Adjusts the picture hue / saturation / luminance of red areas. G-Hue / G-Saturation / G-Luminance Adjusts the picture hue / saturation / luminance of green areas. B-Hue / B-Saturation / B-Luminance Adjusts the picture hue / saturation / luminance of blue areas. More Detailed Adjustment Adjusts more detailed items for Colour Management. C-Hue / M-Hue / Y-Hue: Adjusts the picture hue of cyan / magenta / yellow areas.
■■Gamma Gamma Switches the gamma curve. ●● Please note the numerical values are reference for the adjustment. More Detailed Adjustment Adjusts more detailed items for Gamma. Input Signal Level: Adjusts the input signal level. Gain: Adjusts the gain of gamma for selected signal level. Reset to Defaults: Resets items for More Detailed Adjustment. Reset to Defaults Resets Gamma to the default settings. ■■Reset to Defaults Reset to Defaults Resets Advanced Settings to the default settings.
Option Settings 1. Display the menu with MENU. 2. Select Picture > Option Settings and press OK to access. 3. Select one of the following items and press OK to access. Game Mode / Film Cadence Mode / 1080p Pure Direct / 4K Pure Direct / 1080p Pixel by 4pixels / HDMI Content Type / HDMI RGB Range / 3D-COMB 4. Set the item and press OK to store. Game Mode (On / Off) Provides suitable images for fast response signals when playing games.
HDMI Content Type (Graphics / Photos / Auto / Off) Adjusts the picture settings of each HDMI input according to the selected content type. Auto: Automatically adjusts the picture settings according to the received HDMI content if the connected equipment supports HDMI Content Type. ●● To set the availability of each content type for Auto mode, select Auto Detail Setting. ●● For HDMI HDMI RGB Range (Auto / Full / Normal) Adjusts the black level of the image for each HDMI input.
Screen Settings 1. Display the menu with MENU. 2. Select Picture > Screen Settings and press OK to access. 3. Select one of the following items and press OK to access. 16:9 Overscan / Zoom Adjustments / Screen Display 4. Set the item and press OK to store. 16:9 Overscan (On / Off) Selects the screen area displaying the image for 16:9 aspect. On: Enlarges the image to hide the edge of the image. Off: Displays the image in the original size. ●● Set to On if noise occurs on the edge of the screen.
Copy Adjustment Copies the picture settings of True Cinema or Custom to those of the other input mode or Viewing Mode. 1. Display the menu with MENU. 2. Select Picture > Copy Adjustment > Destination Viewing Mode / Destination Input and press OK to access. 3. Select the destination to copy to and press OK to set. 4. Select Copy Start and press OK to copy. 5. When a confirmation screen is displayed, select Yes and press OK to set. = Note = ●● Option Settings and Screen Settings are not copied.
For best audio Sound mode 1. Display the menu with MENU. 2. Select Sound > Mode and press OK to access. 3. Select the mode and press OK to set. Mode (Standard / Music / Ambience / User) Selects your favourite sound mode for each input. Standard: Provides the suitable sound quality for all types of scenes. Music: Improves sound quality for watching music videos, etc. Ambience: Improves spatial effects and provides clear sounds.
Basic settings 1. Display the menu with MENU. 2. Select Sound and press OK to access. 3. Select one of the following items and press OK to access. Bass / Treble / Equaliser / Balance / Surround / Bass Boost 4. Set the item and press OK to store. Bass Adjusts level to enhance or minimise lower, deeper sound output. Treble Adjusts level to enhance or minimise sharper, higher sound output. Equaliser Adjusts the frequency level to suit your favourite sound quality.
Bass Boost (On / Off) Enhances the effect of bass sounds. ●● This function is effective only for the sound from TV speakers.
Volume settings 1. Display the menu with MENU. 2. Select Sound and press OK to access. 3. Select one of the following items and press OK to access. Speaker Selection / TV Speaker Setting / Headphone Volume / Auto Gain Control / Volume Correction / Speaker Distance to Wall 4. Set the item and press OK to store. Speaker Selection (TV / Home Cinema) Enables controlling the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. TV: TV speakers are active.
Auto Gain Control (On / Off) Automatically regulates large sound level differences between channels and inputs. Volume Correction Adjusts the volume of each individual channel or input mode. Speaker Distance to Wall (Up to 30cm / Over 30cm) Compensates for the low frequency sound due to the distance between the speakers and the wall. ●● If the back space between the TV and wall is within 30 cm, Up to 30cm is recommended.
Voice Guidance Settings 1. Display the menu with MENU. 2. Select Sound > Voice Guidance Settings and press OK to access. 3. Select one of the following items and press OK to access. Voice Guidance / Speed / Volume / User Level / Web Browser 4. Set the item and press OK to store. Voice Guidance (On / Off) Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users. Speed (Fast / Normal / Slow) Selects the readout speed for the voice guidance.
Audio Description 1. Display the menu with MENU. 2. Select Sound > Audio Description and press OK to access. 3. Select one of the following items and press OK to access. Preferred Audio Type / Volume / Speakers / Headphones 4. Set the item and press OK to store. Preferred Audio Type (Audio Description / Standard) Narration settings for visually impaired users Set to Audio Description to activate the narration sound track when available on the broadcast.
Advanced settings 1. Display the menu with MENU. 2. Select Sound and press OK to access. 3. Select one of the following items and press OK to access. NICAM / Audio Preference / SPDIF Selection / PCM Optical Level / SPDIF Delay / HDMI Input 4. Set the item and press OK to store. NICAM (On / Off) Near Instantaneous Companded Audio Multiplex Reproduces NICAM stereo sound. ●● Set to Off if reception is poor.
SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals. ●● SPDIF is a standard audio transfer file format. Auto: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as Dolby Digital Bitstream. MPEG is output as PCM. PCM: Digital output signal is fixed to PCM. ●● ARC (Audio Return Channel) is a function of digital audio output using HDMI cable.
TV Guide Freeview EPG (UK) Using the Freeview EPG enables you to select a programme easily, view programme information, etc. ●● For DVB (UK only) 1. Select DVB with TV. 2. Display TV Guide with GUIDE. (Example) TV screen Date and time Programme Channel position and name ●● To watch the programme 1) Select a programme and press OK to access. 2) Select Watch now and press OK to watch. – To use Timer Programming, select Record.
●● To jump to the currently selected channel (green) ●● To view more details of the programme 1) Select the programme. 2) Press to view. – Press again to return to TV Guide. ●● To exit TV Guide EXIT = Note = ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use the Freeview EPG. You can update the software later manually.
TV Guide (Ireland) TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcaster). ●● Not valid in Analogue ●● Ireland only 1. Select DVB with TV. 2. Display TV Guide with GUIDE. (Example) TV screen Date Time Programme Channel position and name ●● To watch the programme 1) Select the current programme and press OK to access.
●● To search programme titles and view a list of the searched programmes (if available) 1) Display the search list with (yellow). 2) Select Search and press OK to access. 3) Enter characters with Cursor buttons or Numeric buttons, and press OK to set. 4) Press (green) to start searching. – All the programme titles including the word you set are listed. – Searching without any characters lists all programmes including current programmes.
Timer Programming This function allows you to select programmes that you want to record to the USB HDD. 1. Display TV Guide with GUIDE. 2. Select the forthcoming programme and press OK to access. 3. Select Record and press OK to set. (UK only) ●● You can also set a timer event pressing ●● To check / change / cancel a timer event . Recording > Timer Programming > Editing Timer Programming ●● LED turns to orange in Standby mode when Timer Programming is set.
Guide link programming Guide link programming is Timer Programming which is controlled by information from the TV Guide; if programme start and end times are changed by the broadcaster, the timer event will follow the change. ●● UK only ●● is displayed on the timer event if the timer is set from the TV Guide.
Teletext Digital text service Digital text services (MHEG) differ greatly from analogue teletext. When you switch to a digital text service, the images you see can contain graphics and text, laid out and controlled in a manner decided by the broadcaster. 1. Select DVB with TV. ●● DVB programmes may have digital text services (MHEG). 2. Switch to a digital text service with TEXT.
Viewing Teletext 1. Switch to teletext with TEXT. ●● Displays the index page (content varies depending on the broadcaster). ●● Current / sub page numbers are displayed on the top left of the screen. ●● Time / date is displayed on the top right of the screen. ●● Colour bar is displayed on the bottom of the screen. 2. Select the page with Cursor buttons, Numeric buttons or (coloured buttons). ●● To adjust contrast 1) Press MENU twice to display Contrast. 2) Adjust and press OK to set.
■■Store frequently viewed pages in the colour bar (List mode) 1. Press (coloured buttons) while the page is displayed. 2. Press and hold OK. ●● The stored page number changes to white. ●● If you use subtitles, do not change number on ●● To change stored pages 1) Press (blue). (coloured buttons) to change. 2) Enter a new page number with Numeric buttons. 3) Press and hold OK. ■■View sub page The number of sub pages is displayed on the top of the screen. Press to view sub page.
Teletext mode Teletext services are the text information provided by the broadcaster. ●● The features may vary depending on the broadcaster. ●● The availability of teletext services for a programme is indicated by TEXT in the information banner. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Teletext and press OK to access. 3. Select FASTEXT / List and press OK to set. ■■FASTEXT mode In FASTEXT mode, four differently coloured subjects are situated on the bottom of the screen.
Teletext Character Set Selects teletext language font. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Teletext Character Set and press OK to access. 3. Select the font and press OK to set. West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc. East2: Czech, Hungarian, Lettish, Polish, Rumanian, etc.
Tuning and editing channels Setting menu You can retune channels, create your favourite channel lists, skip unwanted channels, etc. 1. Select the mode with TV. DVB / Analogue 2. Display the menu with MENU. 3. Select Setup > Tuning Menu and press OK to access. DVB Tuning Menu / Analogue Tuning Menu ●● The menu name varies depending on the TV mode. 4. Select one of the functions and press OK to access.
Favourites Edit ■■List favourite DVB channels Create your favourite channel lists from various broadcasters (up to 4: Favourites 1 to 4). The favourites lists are available for switching in the information banner and the TV Guide screen. Watching > Basic > Information banner Watching > TV Guide > Freeview EPG (UK) Watching > TV Guide > TV Guide (Ireland) 1. Select Favourites Edit and press OK to access. 2. Select a channel to list from all DVB channels. ●● ●● appears when the channel is encrypted.
●● To delete the channel 1) Select the channel. 2) Press OK to delete. – Press ●● (yellow) to delete all channels. To name the favourites 1) Press (red). 2) Enter characters (maximum 10 characters) with Cursor buttons or Numeric buttons, and press OK to set. 3) Press BACK/RETURN to store. = Note = ●● Channel position numbers (known as logical channel numbers) can be swapped in Channel List.
Channel List ■■Skip unwanted channels You can hide (skip) unwanted channels. The hidden channels cannot be displayed except in this function. 1. Select Channel List and press OK to access. 2. Select a channel. 3. Press OK to set Reveal / Hide (skip). : Reveal : Hide (skip) ●● To reveal all channels (if available) (yellow) ■■Edit DVB / Analogue Channels ●● To swap the channel position number (logical channel number) 1) Press (green) to edit.
Auto Setup Automatically retunes the channels received in the area. ●● This function is available if channel tuning is already performed. ●● Only the selected mode is retuned. All the previous tuning settings are erased. ●● Child Lock PIN number is required to retune locked channels. Functions > Child Lock > PIN number ●● If tuning has not been done completely, set Manual Tuning. Watching > Tuning and editing channels > Manual Tuning ■■DVB, Analogue 1. Select Auto Setup and press OK to access. 2.
Channel Sorting by Region You can sort DVB channels so that those with the best signal quality, or those for your preferred region, appear nearer the top of your channel list. (UK only) 1. Select the region and press OK to access. 2. Select repeatedly until you reach the available region. ●● Normally, you should select Best signal quality (All Regions). ●● If you choose to select your preferred region, you could find channels with a weaker signal appear nearer the top of your channel list.
Manual Tuning ●● Normally use Auto Setup or Update Channel List to retune DVB channels. ●● If tuning has not been done completely or for adjusting the direction of the aerial, use this function. (DVB) ●● All DVB channels found are added to Channel List. ■■DVB (UK only) 1. Select Frequency. 2. Press OK to search. ●● All channels found are added to Channel List. ■■DVB (Ireland only) 1. Select a channel and adjust frequency for each channel.
Update Channel List By updating the DVB channel list, you can add new channels, delete removed channels or change channel names and positions automatically. ●● The channel list is updated while keeping your settings in Favourites Edit, Channel List, Child Lock, etc. ●● Depending on the signal condition, the update may not work properly.
New Channel Message Selects whether to give a notification message when a new DVB channel is found or not. ●● When a notification message appears, you can perform Update Channel List pressing OK.
Signal Condition Selects a channel and checks the signal condition with indicators. ●● A good Signal Strength is not an indication of suitable signal reception. ●● Vertical lines show the maximum signal value of the selected channel.
Other settings Add TV Signal Adds the TV mode. ●● This function is available if you skip any modes to tune in Auto Setup for first using the TV.
Recording USB HDD setup Preparations You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. ●● Prepare the USB HDD for the exclusive use of recording with this TV. ●● Connect the USB HDD to the USB 3 port with the USB cable. ●● Be sure to connect the USB HDD to the mains socket. ●● To remove the USB HDD safely from the TV, perform Safely remove USB in USB Device Setup.
= Caution = ●● All data in the USB HDD will be erased in the following cases: – When formatting the USB HDD with this TV Recording > USB HDD setup > Setting for USB HDD – When formatting the USB HDD to use on PC, etc. ●● When the TV is repaired due to a malfunction, you may have to format the USB HDD again with this TV to use it. (All data will be erased after formatting.) ●● To use the USB HDD with your PC after recording with this TV, format it again on your PC.
Setting for USB HDD Format and set up the USB HDD with this TV in order to use it for recording. All the USB devices recognised as a mass storage device are listed. ●● Please note that USB HDD will be formatted and all data in it will be erased after this setup. ●● Before setting, connect the USB HDD and be sure to turn on the USB HDD. Recording > USB HDD setup > Preparations 1. Display the menu with MENU. 2. Select Setup > USB Device Setup and press OK to access. 3.
●● To change the mode OK ●● To edit USB HDD name (green) ●● To format (red) ●● To remove the USB HDD safely from the TV (yellow) = Note = ●● You can only select one USB HDD for recording at a time. ●● You cannot change the settings for the USB HDD while recording is in progress.
Recording current programme One Touch Recording Records the current programme to the USB HDD immediately. ●● Confirm the remote control code is “73”. Watching > External equipment > Operating with TV’s remote control 1. Display the menu with MENU. 2. Select Setup > Recording Setup > One Touch Recording and press OK to access. 3. Select the maximum recording time 30 / 60 / 90 / 120 / 180 (minutes) and press OK to set. ■■To start One Touch Recording Press ●● to start.
Timer Programming Setting Timer Programming This function allows you to select programmes that you want to record to the USB HDD. ●● Not valid in Analogue 1. Select DVB with TV. 2. Display the menu with MENU. 3. Select Timer > Timer Programming and press OK to access. 4. Press OK to start making the settings. USB HDD Rec.: Records the programme to the USB HDD. 5. Select and set the item (channel, date, start time, end time). ●● and can also be entered with Numeric buttons.
Date – Daily Sun-Sat: Sunday to Saturday – Daily Mon-Sat: Monday to Saturday – Daily Mon-Fri: Monday to Friday – Weekly Sun / Mon / Tue / Wed / Thu / Fri / Sat: Same time on the same day every week Start time / End time / Duration (automatic display) 6. Store with OK.
Editing Timer Programming 1. Display the menu with MENU. 2. Select Timer > Timer Programming and press OK to access. 3. Select the event. ●● To change a timer event OK – Correct as necessary. Recording > Timer Programming > Setting Timer Programming ●● To delete a timer event 1) Press (red). 2) Press OK to delete. ■■To play back or delete the recorded content Recorded TV programmes can be played back in Media Player. 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3.
Remote recording You can set timer programming with the network equipment (smartphone, etc.) from outside the home network. ●● Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● Set TV Anywhere to On. Functions > TV Anywhere > TV Anywhere Settings ●● Additional information about the services may be found on the following website. http://panasonic.
Note ●● TV Guide may also be used to set timer event. Watching > TV Guide > Timer Programming ●● Timer Programming can store up to 15 events. ●● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider. ●● For recording using Timer Programming, the TV must be either on or in Standby. ●● No other channels can be selected while recording of Timer Programming is in progress.
Technical information USB HDD ■■USB HDD (for recording the digital TV programmes with this TV) ●● The capacity of USB HDD that works with this TV is from 160 GB to 3 TB. ●● Connect the USB HDD to the mains socket to record and play back properly with this TV. ●● Use the USB HDD formatted with this TV. Recording > USB HDD setup > Setting for USB HDD ●● Regarding performance, not all USB HDDs are guaranteed.
Media Player Using Media Player Information Media Player allows you to enjoy photo, video or music recorded on the SD Card / USB Flash Memory / USB HDD / network device, and content recorded with this TV to the formatted USB HDD. (Example) Photo mode: Still pictures recorded with digital cameras are displayed. Video mode: Moving pictures recorded with digital video cameras and digital video data are played back.
■■To insert or remove the SD Card Gently insert the SD Card with the label surface facing front. Push the centre of the card until a click is heard. (To remove, push it again.) Label surface Cutout ■■To insert or remove the USB Flash Memory Ensure alignment is straight and complete when inserting or removing. ●● To remove the USB Flash Memory safely from the TV, perform Safely remove USB in USB Device Setup. 1) Display the menu with MENU. 2) Select Setup > USB Device Setup and press OK to access.
Selecting device / mode 1. Insert the SD Card or USB Flash Memory to the TV. ●● When you insert the SD Card, Media Player will start automatically. Media Player > Using Media Player > Information ●● To play back content in the USB HDD, ensure the connection and settings are completed. Recording > USB HDD setup ●● To play back content in the network device, ensure the connection and settings are completed. Media Player > Using Media Player > Network device 2. Display Home Screen with HOME. 3.
●● Select the appropriate device and content for playing back each file. ●● You can use the following buttons during playback. Confirm the remote control code is “73”. Watching > External equipment > Operating with TV’s remote control ■■To change the mode You can switch to another mode of Media Player from the thumbnail view. 1. Display the content selection screen with displayed. (blue) while the thumbnail is 2. Select the content and press OK to access.
Network device You can enjoy photo, video or music stored in the network devices. ●● To enable this function, connect this TV to your home network. Network > Network connections Network > Network settings ■■How to set User / Password 1. Display the menu with MENU. 2. Select Network > File Sharing Settings > Network Device List and press OK to access. 3. Select the network device and press OK to access. 4. Enter User / Password with Cursor buttons or Numeric buttons and press OK to set.
Sharing file You can share the files between PC and devices connected to this TV. ●● To enable this function, connect this TV to your home network. Network > Network connections Network > Network settings 1. Display the menu with MENU. 2. Select Network > File Sharing Settings > File Sharing Server and press OK to access. 3. Select On and press OK to set. 4. Operate your PC to share the files. ●● For operations, refer to the support information on the following website. http://panasonic.
Photo mode Selecting file Select the file in the thumbnail view and press OK to start playback. : Error display ●● To change the size of photos in the thumbnail view 1) Display the option menu with OPTION. 2) Select Change Size and press OK to change.
Viewing photo ■■Playback ●● To operate Single view : To the previous photo : To the next photo : Stop (return to thumbnail) OK : Slideshow ●● To display / hide the operation guide ●● To rotate 90° (blue) ●● To return to thumbnail BACK/RETURN - 129 -
Sorting photos ■■To sort by folder, recorded date or recorded month 1. Display the view selection in the thumbnail view with (green). 2. Select Folder view / Sort by Date / Sort by Month and press OK to set. Folder view: Displays the thumbnail grouped by folder. ●● Files which are in the root folder are collected to the folder named “/”. Sort by Date / Sort by Month: Displays the thumbnail grouped by the same date or month. ●● ●● The group of the photos without recorded dates is shown as Unknown.
Using Slideshow Slideshow ends when all photos within the current thumbnail are viewed. 1. Select the file from the thumbnail of photos for the first view. 2. Start Slideshow with (red) and OK. ●● To display / hide the operation guide ●● To pause (return to Single view) OK ●● To return to thumbnail BACK/RETURN ●● You can change the back ground music by setting Back Ground Music in Slideshow Settings (see below). ■■Slideshow Settings Set up the settings for Photo mode. 1.
Back Ground Music (Off / Type1 / Type2 / Type3 / Type4 / Type5 / User / Auto) Selects the background music during Photo mode. Type1 - 5: Music files installed on this TV at the factory settings are played back. Auto: Music files stored in the current device are played back. ●● If there is no available music data, no sound is played back. User: Music files in the device registered by yourself are played back.
Video mode Selecting file 1. Select the title in the thumbnail view. : Error display : The file does not support thumbnail view. ●● The preview will start when the title / scene is highlighted in the thumbnail view if it supports a preview. To turn off the preview, set Video Preview to Off. Media Player > Video mode > Video Setup 2. Start playback with ●● ●● (red).
Watching video ■■Playback from the selected scene in the title Playback of the selected scene starts and continues until the end of the title. 1. Select the title and press OK to access. 2. Select the scene. 3. Start playback with (red). ●● The structure of titles and scenes may vary depending on the digital video camera used. ●● Playback may not continue depending on the condition.
●● To change aspect 1) Display Aspect Selection with ASPECT. 2) Select the mode and press OK to set. Aspect1: Displays the content in original size. Aspect2: Displays the content enlarged without distortion. – You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) – Aspect cannot be changed depending on the content.
Video Setup Set up the settings for Video mode. 1. Display the option menu with OPTION. 2. Select Video Setup with OK. 3. Select one of the following items and press OK to access. Video Preview / Multi Audio / Dual Mono Audio / Subtitle Settings / Repeat ●● Menu items and selectable options vary depending on the content. 4. Set the item and press OK to store. Video Preview (On / Off) Sets to start the preview of the title or scene in the thumbnail view.
Subtitle Settings Sets the subtitle setting. ●● This function is available during playback. Subtitle: Display / hide subtitles (if available). Subtitle Text: Selects the font type to display subtitles correctly (if available). Subtitle Text Size: Selects the font size of subtitles. Subtitle Text Colour: Selects the colour of subtitles. Subtitle Text Position: Adjusts the position of subtitles on the screen. Subtitle Text Delay: Adjusts the delay time for the subtitles.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Media Player > Video mode > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection and press OK to access. 3. Select Auto / PCM and press OK to set. SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Recorded TV mode Selecting content ●● For exclusive USB HDD ●● To play back content in the USB HDD, ensure the connection and settings are completed. Recording > USB HDD setup 1. Content list of the selected device is displayed in Recorded TV mode. ●● Remaining capacity of the selected device is displayed on the top right. (This value may not be accurate depending on the condition.) ●● Content list is displayed as All or Not Viewed. All: All the recorded TV programmes are listed.
Watching recorded TV ■■Playback ●● To operate playback : Manual skip – Press to skip forward approx. 30 seconds. – Press and hold to skip backward approx. 15 seconds. : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx. 10 seconds Press and hold / : Search rapidly 3) Jump to the specified time point with OK.
●● To confirm or change the current status (if available) Watching > Basic > AV Options ●● To return to list BACK/RETURN - 141 -
Grouping content 1. Select the content to edit and press (blue) to tick in the content list. 2. Display the option menu with OPTION. 3. Select Create Group / Release Group / Exclude from Group / Change Protect Status and press OK to set. Create Group: Create a group of content. Select and tick all the desired content, and then select Create Group. Release Group: Select the created group to release, and then select Release Group. (To release several groups at once, tick all the desired groups.
Deleting content 1. Select the content to edit and press 2. Delete the content with (blue) to tick in the content list. (red). 3. When a confirmation screen is displayed, select Yes and press OK to set.
Chapter List You can start playback from the chapter list you select. 1. Display the chapter list with (yellow). 2. Select the chapter and press OK to start playback. = Note = ●● The chapter list is not displayed while the selected content is being recorded. ●● Depending on the recorded programmes, some playback operations may not work properly.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Media Player > Video mode > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection and press OK to access. 3. Select Auto / PCM and press OK to set. SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Music mode Selecting file 1. Select the folder in the thumbnail view. 2. Start playback with ●● (red).
Playing music ■■Playback of the selected file in the folder 1. Select the folder and press OK to access. 2. Select the file. 3. Start playback with (red). ■■Playback ●● To operate playback : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx.
Music Setup Set up the setting for Music mode. ●● This function is available in the thumbnail view. 1. Display the option menu with OPTION. 2. Select Music Setup > Repeat with OK. 3. Select Off / Folder / One and press OK to set.
Technical information Device handling caution ●● Data modified with a PC may not be displayed. ●● Do not remove the device while the TV is accessing data. Otherwise this can damage the device or TV. ●● Do not touch the pins on the device. ●● Do not subject the device to a high pressure or impact. ●● Insert the device in the correct direction. Otherwise this can damage the device or TV. ●● Electrical interference, static electricity, or erroneous operation may damage the data or device.
SD Card ■■SD Card Use an SD Card which meets SD standards. Failure to do so may cause the TV to malfunction. 2.
USB devices ●● It is recommended to connect the device to the TV’s USB port directly. ●● Some USB devices or USB HUB may not be used with this TV. ●● You cannot connect any devices using a USB card reader. ●● Additional information about the devices may be found on the following website. http://panasonic.net/viera/support (English only) ■■USB Flash Memory USB Flash Memory format: FAT16, FAT32 or exFAT ●● USB HDDs formatted on a PC are not guaranteed to work in Media Player.
Photo format ■■Supported Photo formats ●● JPEG (.jpg, .jpeg) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Image resolution (pixel): 8 × 8 to 30 719 × 17 279 ●● DCF and EXIF standards ●● Progressive JPEG is not supported. = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Video format ■■Supported Video formats ●● AVCHD (.mts) Video codec: H.264 Audio codec: Dolby Digital ●● AVCHD Standard Ver. 2.0 (AVCHD Progressive) ●● The data may not be available if a folder structure on the device is modified. ●● AVI (.avi) Video codec: H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9 Audio codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● MP4 (.f4v, .m4v, .mp4) Video codec: H.264, H.
●● ASF (.asf, .wmv) Video codec: MPEG4, VC-1, WMV9 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● Copy-protected files cannot be played back. ●● FLV (.flv) Video codec: H.264 Audio codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video codec: H.264, MPEG4 Audio codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video codec: H.264, MPEG1, MPEG2, VC-1 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3 ●● TS (.mts, .m2ts, .tp, .trp, .ts, .
●● WebM (.webm) Video codec: VP9 Audio codec: Vorbis ■■Supported Subtitles formats ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions. ●● If there are more than one subtitles text files inside the same folder, they are displayed in the following order of priority: “.srt”, “.sub”, “.txt”. = Note = ●● Some files may not be played back even if they fulfil these conditions.
Music format ■■Supported Music formats ●● MP3 (.mp3) ●● AAC / Apple Lossless (.m4a) ●● Copy-protected files cannot be played back. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Copy-protected files cannot be played back. ●● LPCM (.wav) = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Network Internet content Information You can access some specific websites supported by Panasonic, and enjoy internet content such as videos, games, communication tools, etc. from Apps. (Example) ●● A broadband network environment is required to be able to use this function. Ensure the network connections and network settings are completed.
Selecting internet content 1. Display Apps with APPS. ●● For details of Apps Home Screen > Apps ●● Depending on the usage conditions, it may take a while to read all the data. 2. Select the desired item and press OK to access. (Example) ●● To exit Apps EXIT ●● You can connect a keyboard for character input in the applications. You can also use the keyboard for TV operation.
Note ●● If you cannot access the internet content, check the network connections and settings. Network > Network connections Network > Network settings ●● Design and specifications are subject to change without notice. ●● Not all the features of the websites are available. ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use Apps. You can update the software later manually.
DLNA In-House streaming This TV is a DLNA Certified™ product. DLNA® (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. ●● To enable this function, connect this TV to your home network.
●● Twonky “Twonky” is the product of PacketVideo Corporation. To obtain the Installation Guides for installing and setting “Twonky”, visit the website of TwonkyMedia. Additional fees may be charged to obtain server software. = Note = ●● For information about the server software, consult each software company. ●● When server software for the media server is installed on the PC, the data on the PC may be at risk of being accessed by other people.
■■Sharing the content of this TV with another piece of network equipment You can enjoy the content of this TV with another network equipment connected to your home network. Available content: ●● Photo, video or music content of this TV ●● Current digital TV programme ●● TV programmes recorded on USB HDDs with this TV Available network equipment: ●● ●● DLNA Certified VIERA ●● Smartphone, etc.
Using DLNA To use DLNA® features, ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Network connections Internet connection A broadband network environment is required to be able to use internet services. ●● If you do not have any broadband network services, please consult your retailer for assistance. ●● Dial-up internet connections cannot be used. ●● Required speed (effective): at least 1.5 Mbps for SD (Standard Definition) and 6 Mbps for HD (High Definition) picture quality, respectively. If the transfer speed is not enough, content may not be played back properly.
DLNA connection To use DLNA features, you need a home network environment and you can operate the features without a broadband network environment. ●● A broadband network environment is required to be able to use internet services. Network > Network connections > Internet connection ■■Wireless connection (For DLNA and internet service) Built-in wireless LAN (Rear of the TV) Access point Hub / Router Internet environment Smartphone, etc. DLNA Certified media server (PC, etc.
■■Wired connection (For DLNA and internet service) ETHERNET terminal LAN cable (Shielded) ●● Use Shielded Twist Pair (STP) LAN cable. Hub / Router Internet environment DLNA Certified media server (PC, etc.) ■■Wireless connection (For DLNA) TV ●● To use the TV as a wireless access point Network > Network settings > Custom - Wireless Access Point DLNA Certified media server (PC, etc.) Smartphone, etc.
Note ●● Ensure to use a LAN straight cable. ●● Set up and connect equipment required for the network environment. You cannot make such settings on this TV. Read the manual of the equipment. ●● If your modem has no broadband router functions, use a broadband router. ●● If your modem has broadband router functions but there are no vacant ports, use a hub. ●● Ensure that the broadband routers and hubs are compatible with 10BASE-T / 100BASE-TX.
Network settings Network Connection Ensure the connections are completed before starting network setup. Network > Network connections ■■Quick setup - Wireless 1. Display the menu with MENU. 2. Select Network > Network Connection and press OK to access. ●● Confirm the encryption key, settings and position of your access point before starting setup. For details, read the manual of the access point. 3. Select Quick setup and press OK to access.
■■Quick setup - Wired 1. Display the menu with MENU. 2. Select Network > Network Connection and press OK to access. 3. Select Quick setup and press OK to access. 4. Automatically setup is done and Network Status is displayed. Network > Network settings > Network Status 5. Select Exit and press OK to set. ●● To set manually Network > Network settings > Custom - Wired = Note = ●● To deactivate wireless, set Easy Mirroring to Off and confirm the network connection type is set to Wired.
Custom - Wireless Ensure the connections are completed before starting network setup. Network > Network connections 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wireless and press OK to access. ●● Confirm the encryption key, settings and position of your access point before starting setup. For details, read the manual of the access point. 3. Select your desired access point and press OK to access. ●● Available Wireless Networks are displayed automatically.
4. Enter the encryption key of the access point and press OK to set. ●● You can set characters using Numeric buttons. ●● Press BACK/RETURN to store. 5. IP/DNS Settings is displayed. Acquire IP Address / Acquire DNS Address ●● Auto is recommended. ●● Available settings are displayed automatically. ●● To set manually, select and set IP Address / Subnet Mask / Default Gateway / DNS Address. Proxy Settings ●● It is not required for normal household use.
6. Select Network Status and press OK to access. Network > Network settings > Network Status 7. Select Exit and press OK to set.
Custom - Wired Ensure the connections are completed before starting network setup. Network > Network connections 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wired and press OK to access. 3. IP/DNS Settings is displayed. Acquire IP Address / Acquire DNS Address ●● Auto is recommended. ●● Available settings are displayed automatically. ●● To set manually, select and set IP Address / Subnet Mask / Default Gateway / DNS Address.
4. Select Network Status and press OK to access. Network > Network settings > Network Status 5. Select Exit and press OK to set. = Note = ●● To deactivate wireless, set Easy Mirroring to Off and confirm the network connection type is set to Wired.
Custom - Wireless Access Point You can use the TV as a wireless access point and connect the network equipment without an access point. ●● Confirm the PIN code, network settings of the equipment before starting setup. For details, read the manual of the equipment. 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wireless Access Point and press OK to access. 3. Select Connect to device in WPS and press OK to access. ●● To set manually, select Change settings (see below).
Network Status Displays and checks the network status (MAC Address, current network settings, etc.). 1. Display the menu with MENU. 2. Select Network > Network Status and press OK to access. 3. Automatically testing is done and Network Status is displayed. Try Again: Performs automatic testing of the network connection for the TV and displays the current status again. Status Details: Displays the detailed network status (SSID, security settings, etc.).
my Home Cloud Settings Sets for an account to enjoy the cloud services. 1. Display the menu with MENU. 2. Select Network > my Home Cloud Settings and press OK to access. 3. Select one of the following items and press OK to access. Setup new account / Edit account / Remove account / Notices 4. Follow the on-screen instructions. Setup new account Set up an account for this TV. Edit account Displays and edits the account status. Remove account Deletes an account from this TV.
VIERA Name Sets your favourite name for this TV. 1. Display the menu with MENU. 2. Select Network > VIERA Name and press OK to access. 3. Enter characters and press OK to set. ●● This name is used as the name of this TV on the screen of the other network equipment. ●● When you use two or more TVs in your network environment, set the names of the TVs for each.
TV Remote App Settings Sets to control the TV with the equipment (smartphone, etc.) connected to your network. 1. Display the menu with MENU. 2. Select Network > TV Remote App Settings and press OK to access. 3. Select one of the following items and press OK to access. TV Remote / Powered On by Apps / Networked Standby / Home Streaming / Device to upload contents 4. Set the item and press OK to store. TV Remote (On / Off) Enables controlling the TV from the network equipment (smartphone, etc.).
Home Streaming (Always / Only when powered on) Enables sharing the TV programme and content of this TV with the network equipment (smartphone, etc.) in the home network. ●● Changing the default configuration may result in higher energy consumption of the product. ●● LED turns to orange in Standby mode when Home Streaming is set to Always. Device to upload contents Selects device to upload content from the network equipment (smartphone, etc.).
Network Link Settings Sets to control the TV with devices connected to the network. 1. Display the menu with MENU. 2. Select Network > Network Link Settings and press OK to access. 3. Select one of the following items and press OK to access. DLNA Server / Registration Type / Remote Device List 4. Set the item and press OK to store. DLNA Server (On / Off) Enables sharing the TV programme and content of this TV with the network equipment (DLNA Certified VIERA, etc.).
= Note = ●● Depending on the area, this function may not be available. For details, consult your local Panasonic dealer.
TV Anywhere Settings Settings for watching TV or editing timer programming with the network equipment (smartphone, etc.) from outside the home network.
File Sharing Settings File Sharing Server (On / Off) Sets to share the files between PC and devices connected to this TV. Media Player > Using Media Player > Sharing file Network Device List Lists the accessible network devices to play back the content in Media Player.
Mirroring Settings Settings for the mirroring function Functions > Mirroring > Mirroring Settings - 185 -
Do Not Track Setting Sets to notify websites about tracking your browsing activities. 1. Display the menu with MENU. 2. Select Network > Do Not Track Setting and press OK to access. 3. Select Tracking Mode / About Do Not Track and press OK to access. 4. Set the item and press OK to store. Tracking Mode (Mode1 / Mode2 / Mode3) Mode1: Notifies websites that you want to be tracked. Mode2: Notifies websites that you do not want to be tracked. Mode3: Sends no configuration information about tracking.
Software Update Accesses the specific website to update the TV’s software if any updates are available. 1. Display the menu with MENU. 2. Select Network > Software Update and press OK to access. 3. Follow the on-screen instructions.
New Software Message Selects whether to give a notification message when new software is found via network or not. 1. Display the menu with MENU. 2. Select Network > New Software Message and press OK to access. 3. Select On / Off and press OK to set.
Photos Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Viewing photo ■■Playback ●● To operate Single view : To the previous photo : To the next photo : Stop (return to list) OK : Slideshow ●● To display / hide the operation guide ●● To rotate 90° (blue) ●● To return to list BACK/RETURN - 190 -
Using Slideshow Slideshow ends when all photos within the list are viewed. 1. Select the file from the thumbnail of photos for the first view. 2. Start Slideshow with (red) and OK. ●● To display / hide the operation guide ●● To pause (return to Single view) OK ●● To return to list BACK/RETURN ■■Slideshow Settings Set up the settings for photo file operations on this TV. 1. Display the option menu with OPTION. 2. Select Slideshow Settings and press OK to access. 3.
Videos Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Watching video ■■Playback If you have stopped the last playback halfway, a confirmation screen may be displayed to select whether to start from where you stopped last time or from the beginning. ●● To operate playback : Manual skip (if available) – Press to skip forward approx. 30 seconds. : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar / slow playback) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK.
●● To change aspect 1) Display Aspect Selection with ASPECT. 2) Select the mode and press OK to set. Aspect1: Displays the content in original size. Aspect2: Displays the content enlarged without distortion. – You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) – Aspect cannot be changed depending on the content.
Video Setup Set up the settings for video file operations on this TV. 1. Display the option menu with OPTION. 2. Select Video Setup and press OK to access. 3. Select one of the following items and press OK to access. Video Preview / Multi Audio / Monaural Audio / Dual Mono Audio / Subtitle Settings / Repeat ●● Menu items and selectable options vary depending on the content. 4. Set the item and press OK to store.
Subtitle Settings Sets the subtitle setting. ●● This function is available during playback. Subtitle: Display / hide subtitles (if available). Subtitle Text: Selects the font type to display subtitles correctly (if available). Subtitle Text Size: Selects the font size of subtitles. Subtitle Text Colour: Selects the colour of subtitles. Subtitle Text Position: Adjusts the position of subtitles on the screen. Subtitle Text Delay: Adjusts the delay time for the subtitles.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Network > Videos > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection and press OK to access. 3. Select Auto / PCM and press OK to set. SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Music Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select the media server and press OK to access. ●● To display / hide information of the highlighted media server 1) Display the option menu with OPTION. 2) Select Show Info. and press OK to access. 4.
Playing music ■■Playback ●● To operate playback : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx. 10 seconds Press and hold / : Search rapidly 3) Jump to the specified time point with OK.
Music Setup Set up the settings for music file operations on this TV. 1. Display the option menu with OPTION. 2. Select Music Setup > Repeat with OK. 3. Select Off / Folder / One and press OK to set.
DIGA Recorder Controlling DIGA Recorder Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-House streaming Network > Network connections Network > Network settings 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select DIGA and press OK to access. 4. The screen of the DIGA Recorder is displayed.
Technical information Photo format ■■Supported Photo formats ●● JPEG (.jpg, .jpeg) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Image resolution (pixel): 8 × 8 to 30 719 × 17 279 ●● DCF and EXIF standards ●● Progressive JPEG is not supported. = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Video format ■■Supported Video formats ●● AVCHD (.mts) Video codec: H.264 Audio codec: Dolby Digital ●● AVCHD Standard Ver. 2.0 (AVCHD Progressive) ●● The data may not be available if a folder structure on the device is modified. ●● AVI (.avi) Video codec: H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9 Audio codec: AAC, ADPCM, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● MP4 (.f4v, .m4v, .mp4) Video codec: H.264, H.
●● ASF (.asf, .wmv) Video codec: MPEG4, VC-1, WMV9 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MP3, WMA, WMA Pro ●● Copy-protected files cannot be played back. ●● FLV (.flv) Video codec: H.264 Audio codec: AAC, MP3 ●● 3GPP (.3gp, .3g2) Video codec: H.264, MPEG4 Audio codec: AAC, HE-AAC ●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video codec: MPEG1, MPEG2 Audio codec: Dolby Digital, LPCM ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video codec: H.264, H.
●● WebM (.webm) Video codec: VP9 Audio codec: Vorbis ■■Supported Subtitles formats ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions. ●● If there are more than one subtitles text files inside the same folder, they are displayed in the following order of priority: “.srt”, “.sub”, “.txt”. = Note = ●● Some files may not be played back even if they fulfil these conditions.
Music format ■■Supported Music formats ●● MP3 (.mp3) ●● AAC / Apple Lossless (.m4a) ●● Copy-protected files cannot be played back. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Copy-protected files cannot be played back. ●● LPCM (.wav) = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Functions Info Frame Information Info Frame is a convenient feature to provide you relevant information of the watching programme, recommendations, etc. It is displayed on the edge of screen when you need it. (Example) ●● A broadband network environment is required to be able to use this function fully. = Note = ●● Design and specifications are subject to change without notice.
How to use You can check useful information using Info Frame while watching TV. 1. Press and hold HOME. ●● Info Frame is displayed on the edge of screen. (Example) Current programme information, etc. Relevant information (weather forecast, etc.) Notification message Recommended content (TV programme, internet content, etc.) 2. Select one side of Info Frame with Cursor buttons or (coloured buttons) while Info Frame is displayed. 3. Follow the on-screen instructions.
Settings You can set items for Info Frame. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Info Frame at Power on and press OK to access. 3. Set the item and press OK to store. Info Frame at Power on (On / Off) Displays Info Frame when the TV is turned on.
Voice Control Information Voice Control function allows you to operate the TV (e.g. selecting a channel), search the content from various features, etc. by your speech with your smartphone. ●● A broadband network environment is required to be able to use this function fully. Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● To use this function, you need to install the application for controlling VIERA on your smartphone.
How to use 1. Press ●● on the screen of your smartphone to display the operation guide. When a confirmation screen is displayed, read carefully and start Voice Control function. (Example) 2. Say a key word (e.g. my Home Screen) to the microphone while the operation guide is displayed. (Example) ●● The operation guide turns to blue during processing. ●● The operation guide automatically disappears after a certain period of time. Press again to start the Voice Control function.
Settings You can set items for Voice Control function. 1. Display the menu with MENU. 2. Select Setup > Voice Control Settings and press OK to access. 3. Select one of the following items and press OK to access. Speech Detection Level / Terms of Service / Instructions for Voice Control 4. Set the item and press OK to store. Speech Detection Level (High / Standard) Adjusts the sensitivity to recognise your speech. Terms of Service Displays the terms of service.
Note ●● When you start Voice Control function, sound level of the TV becomes low. ●● Voice Control function may not work properly in the following conditions: – Not pronounce clearly and correctly – Volume level of your voice is too loud or too low. – Surrounded by the noise ●● Phrases other than Voice Command may not be recognised. ●● Voice Control function may not work properly depending on the microphone of the smartphone. ●● Design and specifications are subject to change without notice.
TV Anywhere How to use You can watch TV and set timer event with the network equipment (smartphone, etc.) from outside the home network. Smartphone, etc. TV ●● Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings 1. Set TV Anywhere to On. Functions > TV Anywhere > TV Anywhere Settings 2. Connect the device (smartphone, etc.) to the home network and access to the TV.
TV Anywhere Settings 1. Display the menu with MENU. 2. Select Network > TV Anywhere Settings and press OK to access. 3. Select one of the following items and press OK to access. TV Anywhere / Powered on by Swipe & Share / Device ID / Device Password 4. Follow the on-screen instructions. TV Anywhere (On / Off) Enables watching TV and setting timer event with the network equipment (smartphone, etc.) from outside the home network.
Mirroring How to use You can watch display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. Smartphone, etc. TV 1. Display Home Screen with HOME. 2. Select Devices and press OK to access. 3. Select Mirroring and press OK. 4. Follow the on-screen instructions. ●● Pairing information of the device (smartphone, etc.) is registered once you use this function. ■■Easy Mirroring You can also start the mirroring function from the other devices (smartphone, etc.
Mirroring Settings You can set items for the mirroring function. 1. Display the menu with MENU. 2. Select Network > Mirroring Settings and press OK. 3. Select one of the following items and press OK to access. Easy Mirroring / Powered On by Easy Mirroring / Delete All Pairings 4. Set the item and press OK to store. Easy Mirroring (On / Off) Enables starting the mirroring function from the other devices (smartphone, etc.) without operating the TV.
VIERA Link “HDAVI Control™” Summary of VIERA Link Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control™” function. VIERA Link (HDAVI Control) connects the TV and the equipment with VIERA Link function, and enables easy control, playback, energy saving, creating home theatre, etc. without complicated settings. Connections to the equipment (DVD Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically.
■■VIERA Link (HDMI connection) ●● Use a fully wired HDMI compliant cable. ●● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment.
■■VIERA Link (HDMI and Audio out connections) ●● Use a fully wired HDMI compliant cable. ●● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. ●● Use a fully wired SCART cable. ●● Use the optical digital audio cable for audio output from the TV.
■■Available features (HDMI and Audio out connections) Player theatre ●● Easy playback ●● Power on Link ●● Power off Link ●● Intelligent Auto Standby ●● VIERA Link Control ●● Speaker Selection Blu-ray Disc theatre ●● Easy playback ●● Power on Link ●● Power off Link ●● Standby Power Save ●● Intelligent Auto Standby ●● VIERA Link Control ●● Speaker Selection Amplifier ●● Power off Link ●● Intelligent Auto Standby ●● Speaker Selection : For equipment which has “HDAVI Control 2 or
■■VIERA Link Control of compatible equipment The following is the maximum number of compatible equipment that can be controlled by VIERA Link Control. This includes connections to equipment already connected to the TV. For example, DVD Player connected to Amplifier which is connected to the TV via an HDMI cable.
Preparations ●● Connect the equipment supporting VIERA Link. ●● For details of VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Use a fully wired HDMI compliant cable. ●● Use a fully wired SCART cable. ●● Set up the connected equipment. Read the manual of the equipment. ●● Set VIERA Link to On in the Setup Menu. ●● Set up the TV. After connection, turn the equipment on and then switch the TV on.
Easy playback Automatic input switching - When the connected equipment is operated, the input mode is switched automatically.
Power on Link Set Power on Link to On in VIERA Link Settings to use this function. When the connected equipment is operated, the TV is automatically turned on. (Only when the TV is in Standby mode.
Power off Link Set Power off Link to On in VIERA Link Settings to use this function. When the TV is set to Standby mode, the connected equipment is also automatically set to Standby. ●● This function will work even if the TV enters Standby mode automatically by auto power standby function.
Standby Power Save Set Standby Power Save to On in VIERA Link Settings to use this function. The power consumption of the connected equipment in Standby mode is controlled higher or lower in synchronisation with the TV on / off state to reduce the consumption. When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption of the connected equipment is automatically minimised.
Intelligent Auto Standby Set Intelligent Auto Standby to On in VIERA Link Settings to use this function. When the TV is on, non-used connected equipment goes into Standby mode automatically to reduce the power consumption. For example, when the input mode is switched from HDMI or when Speaker Selection is changed to TV (except for watching a disc). ●● This function may not work properly depending on the connected equipment. In this case, set to Off.
VIERA Link Control You can control some functions of the connected equipment with this TV’s remote control by pointing at the TV’s signal receiver. 1. Display Apps with APPS. 2. Select VIERA Link and press OK to access. 3. Select VIERA Link Control and press OK to access. 4. Select one of the following items and press OK to access. Recorder / Player / Home Cinema / Video Camera / LUMIX / Digital Camera / Other (The menu of the accessed equipment is displayed. The input mode is changed automatically.
= Note = ●● If you cannot operate the equipment, check the settings and the equipment. Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Some operations may not be available depending on the equipment. In this case, use the remote control of the connected equipment. ●● For details of the operations for the connected equipment, read the manual of the equipment.
Speaker Selection You can control the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. 1. Display Apps with APPS. 2. Select VIERA Link and press OK to access. 3. Select Speaker Selection and press OK to access. 4. Select TV / Home Cinema and press OK to set. TV: TV speakers are active. Home Cinema: The sound is delivered from theatre speakers. Player theatre, Bluray Disc theatre or Amplifier will be automatically turned on if it is in Standby mode.
Note ●● These functions may not work properly depending on the connected equipment. ●● Image or sound may not be delivered for the first few seconds when the input mode is switched. ●● “HDAVI Control 5” is the newest standard for HDAVI Control compatible equipment. This standard is compatible with conventional HDAVI equipment.
Child Lock Using Child Lock You can lock specific channels / AV input terminals to restrict access to them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. 1. Display the menu with MENU. 2. Select Setup > Child Lock and press OK to access. 3. Enter the PIN number (4 digits) with Numeric buttons. ●● Enter the PIN number twice at first setting. ●● Make a note of the PIN number in case you forget it. 4. Select Child Lock List and press OK to access. 5.
= Note = ●● For DVB (UK only) - 234 -
PIN number You can change the PIN number. 1. Select Change PIN and press OK to access. 2. Enter a new PIN number twice with Numeric buttons. = Note = ●● Setting Shipping Condition erases the PIN number and all settings.
Parental Rating To watch the DVB programme that has rating information on the selected age, enter the PIN number (depending on the broadcaster). 1. Select Parental Rating and press OK to access. 2. Select an age for the restriction of programmes and press OK to set. = Note = ●● Setting Shipping Condition erases the PIN number and all settings.
Common Interface Caution If the encrypted message is displayed on the screen, the correct Common Interface (CI) Module and smart card that are required for this service are not inserted. ■■How to insert CI module and smart card ●● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ●● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module.
Using Common Interface The Common Interface Module menu provides access to software contained in Common Interface (CI) Modules. ●● Video and audio signals may not be output depending on the broadcast or service. ■■Insert the CI module (optional) ●● Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels do not appear, perform the below to verify the card is recognised by the TV.
Shipping Condition Shipping Condition Resets the TV to its original condition (i.e. no channels tuned in). All settings other than USB Device Setup are reset (channels, picture, sound settings, etc.). 1. Display the menu with MENU. 2. Select Setup > System Menu > Shipping Condition and press OK to access. 3. When a confirmation screen is displayed, select Yes and press OK to set. 4. Follow the on-screen instructions. ●● Auto Setup automatically starts. = Note = ●● To retune TV channels only (e.g.
Updating the TV Software Information A new version of software may be released for download to enhance the performance or operations of the TV. In DVB, a notification banner will appear when one of the BBC channels is turned to if a new available software is found. ●● To install new software, select Standby / Now and press OK to set. Standby: Installs new software in standby condition. Now: Installs new software now.
Auto update You can update new software automatically. 1. Display the menu with MENU. 2. Select Setup > System Menu > System Update > Auto Update Search in Standby and press OK to access. 3. Select On and press OK to set. ●● If any software updates are available, a notification message will appear. To install new software, select Standby / Now and press OK to set. Standby: Installs new software in standby condition. Now: Installs new software now.
Manual update You can update new software manually. 1. Display the menu with MENU. 2. Select Setup > System Menu > System Update > System Update Search Now and press OK to access. 3. Searches for an update (for several minutes) and displays a corresponding message if any. 4. Download with OK. = Note = ●● Download may take a few hours. ●● During software download and update, DO NOT perform any operations on the TV or switch Off the TV.
Setting characters Using Numeric buttons You can enter characters for free input items using Numeric buttons. Press Numeric buttons repeatedly until you reach the desired character. :.@/1!:#+-*_()“‘%&?,;=$[]~<>{}|`^\ :abc2ABC :def3DEF :ghi4GHI :jkl5JKL :mno6MNO :pqrs7PQRS :tuv8TUV :wxyz9WXYZ : Space 0 ●● The character is set automatically if you leave for 1 second. ●● You can also set the character pressing OK or other Numeric buttons less than 1 second.
Keyboard Keyboard ●● Keyboards requiring the drivers are not supported. ●● To change the language type, set USB Keyboard Layout. 1) Display the menu with MENU. 2) Select Setup > System Menu > USB Keyboard Layout and press OK to access. 3) Select the language and press OK to set. ●● Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboard layout setting. ●● Some of the keys of keyboards may correspond to the operation of the remote control.
Settings Setting menu How to use Various menus allow you to make settings for the picture, sound, and other functions. 1. Display the menu with MENU. ●● Displayed items vary depending on the input signal. 2. Select the menu and press OK to access. 3. Select the items and press OK to access. ●● Only available items can be selected. ●● You can also access from eHELP pressing available).
●● To exit the menu screen EXIT ●● To return to the previous screen BACK/RETURN = Note = ●● Menu items and selectable options vary depending on the mode (TV mode, Media Player, Network services, etc.). ●● Some settings in Picture menu may also affect the menu screen when watching content in 4K format. ●● If Demo Settings is displayed in the Setup Menu, the TV is in “Shop” viewing environment. To return to “Home” viewing environment, initialise all settings by accessing Shipping Condition.
Picture Viewing Mode Selects your favourite picture mode for each input.
Basic settings Backlight, Contrast, Brightness, Colour, Tint, Sharpness Adjusts the levels of these options according to your personal preference. Watching > For best picture > Basic settings ●● Sharpness is not available when 1080p Pixel by 4pixels is set to On. Colour Temperature Sets the overall colour tone of the picture (bluer - redder). Watching > For best picture > Basic settings Vivid Colour (On / Off) Automatically adjusts colours to vivid ones.
Intelligent Frame Creation (Max / Mid / Min / Off) Automatically compensates the picture frame rate and removes juddering movements to make the images smooth. Watching > For best picture > Basic settings ●● Depending on the content, images may be noisy. To prevent the noise, change the setting. ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On.
Ambient Sensor Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting condition.
Noise reduction settings Noise Reduction (Auto / Max / Mid / Min / Off) Reduces unwanted picture noise. Watching > For best picture > Noise reduction settings ●● Not valid in the following conditions: – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On. MPEG Remaster (Auto / Max / Mid / Min / Off) Reduces flicker noise in contoured parts of a picture and block noise.
Advanced Settings You can adjust and set up the detailed picture settings. Watching > For best picture > Advanced Settings This function is available when Viewing Mode is set to Cinema, True Cinema or Custom.
Option Settings Game Mode (On / Off) Provides suitable images for fast response signals when playing games. Watching > For best picture > Option Settings ●● Not valid in TV mode Film Cadence Mode (On / Off) Improves vertical resolution for movie images. Watching > For best picture > Option Settings ●● This function is available for interlaced signals (except in Network services or when Game Mode is set to On).
HDMI Content Type (Graphics / Photos / Auto / Off) Adjusts the picture settings of each HDMI input according to the selected content type. Watching > For best picture > Option Settings ●● For HDMI HDMI RGB Range (Auto / Full / Normal) Adjusts the black level of the image for each HDMI input. Watching > For best picture > Option Settings ●● For HDMI 3D-COMB (On / Off) Makes still or slow moving pictures more vivid.
Screen Settings 16:9 Overscan (On / Off) Selects the screen area displaying the image for 16:9 aspect. Watching > For best picture > Screen Settings ●● Not valid in the following conditions: – 4K content – Photo content – Game Mode is set to On. – 1080p Pixel by 4pixels is set to On. – 1080p Pure Direct is set to On. – 4K Pure Direct is set to On. Zoom Adjustments Adjusts the vertical position and size when aspect is set to Zoom.
Copy Adjustment Copies the picture settings of True Cinema or Custom to those of the other input mode or Viewing Mode.
Reset to Defaults Resets the current Picture Viewing Mode to the default settings.
Sound Mode Selects your favourite sound mode for each input.
Basic settings Bass Adjusts level to enhance or minimise lower, deeper sound output. Watching > For best audio > Basic settings Treble Adjusts level to enhance or minimise sharper, higher sound output. Watching > For best audio > Basic settings Equaliser Adjusts the frequency level to suit your favourite sound quality. Watching > For best audio > Basic settings Balance Adjusts volume level of right and left speakers.
Volume settings Speaker Selection (TV / Home Cinema) Enables controlling the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. Watching > For best audio > Volume settings ●● This function is available when the theatre speakers supporting VIERA Link function is connected to this TV. TV Speaker Setting (TV Speaker / Headphone / Off) Selects the sound output to adjust volume. Watching > For best audio > Volume settings Headphone Volume Adjusts the volume of headphones.
Voice Guidance Settings Voice Guidance (On / Off) Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users. Watching > For best audio > Voice Guidance Settings Speed (Fast / Normal / Slow) Selects the readout speed for the voice guidance. Watching > For best audio > Voice Guidance Settings Volume (Max / Mid / Min) Selects the volume for the voice guidance.
Audio Description Preferred Audio Type (Audio Description / Standard) Narration settings for visually impaired users Watching > For best audio > Audio Description ●● For DVB Volume Adjusts the volume for Audio Description. Watching > For best audio > Audio Description ●● For DVB Speakers (Mix / Standard) Set to Mix to activate the description sound track from TV speakers.
Advanced settings NICAM (On / Off) Near Instantaneous Companded Audio Multiplex Reproduces NICAM stereo sound. Watching > For best audio > Advanced settings ●● For Analogue Audio Preference (Multichannel / Stereo / MPEG) Selects the initial setting for audio tracks. Watching > For best audio > Advanced settings ●● For digital ●● Ireland only SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
HDMI Input (Digital / Analogue) Selects to fit the input signal.
Reset to Defaults Resets the current Sound Mode to the default settings.
Network Network Connection Sets the network setting to use this TV in your network environment.
Network Status Displays and checks the network status (MAC Address, current network settings, etc.).
my Home Cloud Settings Sets for an account to enjoy the cloud services.
VIERA Name Sets your favourite name for this TV.
TV Remote App Settings Sets to control the TV from network equipment (smartphone, etc.).
Network Link Settings Sets to control the TV with devices connected to the network.
TV Anywhere Settings You can set timer programming with the network equipment (smartphone, etc.) from outside the home network.
File Sharing Settings File Sharing Server (On / Off) Sets to share the files between PC and devices connected to this TV. Media Player > Using Media Player > Sharing file Network Device List Lists the accessible network devices to play back the content in Media Player.
Mirroring Settings Settings for the mirroring function Functions > Mirroring > Mirroring Settings - 274 -
Do Not Track Setting Sets to notify websites about tracking your browsing activities.
Other settings Software Update Checks for available software updates from the Panasonic website. Network > Network settings > Software Update New Software Message (On / Off) Selects whether to give a notification message when new software is found via network or not.
Timer Off Timer Sets the duration of time until the TV automatically goes into Standby mode.
Timer Programming Sets a timer to record forthcoming programmes.
Time Zone Adjusts the time data.
Auto Standby Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours.
No signal Power off Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes.
Setup Eco Navigation Automatically sets the TV to the most suitable energy-saving mode.
Voice Control Settings Settings for Voice Control function Functions > Voice Control > Settings - 283 -
USB Device Setup Formats the USB HDD or safely removes USB device.
Recording Setup Settings for the recording feature of the USB HDD Recording > Recording current programme > One Touch Recording - 285 -
Child Lock Applies access control for channels or inputs to prevent unwanted access.
Tuning Menu Favourites Edit Creates a list of favourite channels. Watching > Tuning and editing channels > Favourites Edit ●● Not valid in Analogue Channel List Skips unwanted channels or edits channels. Watching > Tuning and editing channels > Channel List Auto Setup Automatically searches for receivable channels. Watching > Tuning and editing channels > Auto Setup Channel Sorting by Region Automatically sorts tuned channels according to the available region.
Signal Condition Checks the signal condition. Watching > Tuning and editing channels > Signal Condition ●● Not valid in Analogue Add TV Signal Adds the TV mode. Watching > Tuning and editing channels > Other settings = Note = ●● The settings in Tuning Menu are applicable only for the selected TV mode. The menu name varies depending on the TV mode.
Language Preferred Multi Audio Selects the preferred language for digital channel multi audio (depending on the broadcaster). Watching > Basic > Language ●● UK only Preferred Audio 1 / 2 Selects the first and second preferred language for digital channel multi audio (depending on the broadcaster). Watching > Basic > Language ●● Ireland only Preferred Subtitles 1 / 2 Selects the first and second preferred language for digital channel subtitles (depending on the broadcaster).
Display Settings Preferred Subtitle Type (Standard / Hard of Hearing) Selects the preferred subtitle type. Watching > Basic > Subtitle ●● Ireland only Teletext (FASTEXT / List) Selects analogue teletext display mode. Watching > Teletext > Teletext mode Teletext Character Set (West / East1 / East2) Selects teletext language font.
Playing Time Display (On / Off) Set to On to display a time period of continuous use in Game Mode on the top right of the screen every 30 minutes. Watching > External equipment > Watching external input ●● This function is available when Game Mode is set to On. Radio Mode (20 / 15 / 10 / 5 / Off (seconds)) Sets the timer for turning off the screen automatically when a radio channel is selected.
HDCP Setting Select a version of HDCP according to the content you watch. (Auto / 2.2 / 1.
HDMI Auto Setting Set to Mode1 when the image in HDMI input is not displayed properly.
VIERA Link Settings VIERA Link (On / Off) Sets to use VIERA Link functions. Functions > VIERA Link “HDAVI Control™” > Preparations Power on Link (On / Off) Sets to use Power on Link functions. Functions > VIERA Link “HDAVI Control™” > Power on Link Power off Link (On / Off) Sets to use Power off Link functions. Functions > VIERA Link “HDAVI Control™” > Power off Link Standby Power Save (On / Off) Controls the connected equipment to reduce power consumption in Standby.
System Menu USB Keyboard Layout Selects the language that your USB Keyboard supports. Functions > Keyboard > Keyboard Shipping Condition Resets all settings to the original condition. Functions > Shipping Condition > Shipping Condition Common Interface Sets to watch encrypted channels, etc. Functions > Common Interface > Using Common Interface System Update Downloads new software to this TV. Functions > Updating the TV Software > Auto update Licence Menu Displays the software licence information.
Other Settings Power on Channel List (All Channel List / Last) Automatically selects all channels or favourites list in the information banner when the TV is turned on. Watching > Basic > Selecting channel ●● Not valid in Analogue Power Save (On / Off) Reduces brightness of the picture to economise on power consumption.
Support Help menu Using Help menu 1. Display the menu with MENU. 2. Select Help and press OK to access. 3. Select About Firefox OS / TV Self Test / System Information / Device Information and press OK to access. About Firefox OS Displays the information about Firefox OS. TV Self Test Makes a diagnosis of picture or sound problems. Follow the on-screen instructions. System Information Displays the system information of this TV. Device Information Displays the device information of this TV.
FAQs Picture Before requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of picture problem in TV Self Test. Support > Help menu > Using Help menu If the problem still persists, please contact your local Panasonic dealer for assistance. Auto aspect ●● Auto aspect is designed to provide you with the best ratio to fill the screen. Watching > For best picture > Aspect Control Signal ●● Press ASPECT if you want to change the aspect ratio manually.
No image is displayed ●● Check the correct input mode is selected. ●● Check the setting of AV2 (COMPONENT / VIDEO) in Input Selection to match the signal being output by the external equipment. Watching > External equipment ●● Is Backlight, Contrast, Brightness or Colour in the Picture Menu set to the minimum? Watching > For best picture > Basic settings ●● Check all required cables and connections are firmly in place. Blurry or distorted image (no sound or low volume) ●● Reset channels.
Digital TV Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs / Some channels cannot be tuned ●● Check the position, direction and connection of the aerial. ●● Check Signal Condition. If the level of Signal Quality is low, the DVB signal is weak.
Cannot find a channel you have previously watched ●● The channel may broadcast for part of the day. ●● Check the channel in the TV Guide. Watching > TV Guide ●● Channel position numbers may be changed by broadcasters. ●● Reset channels.
Analogue TV Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. White spots or shadow image (ghosting) occurs / Some channels cannot be tuned ●● Check the position, direction and connection of the aerial. ●● Weather conditions affect signal reception (heavy rain, snow, etc.), in particular in poor reception areas.
Sound Before requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of sound problem in TV Self Test. Support > Help menu > Using Help menu If the problem still persists, please contact your local Panasonic dealer for assistance. No sound is produced ●● Is “Sound mute” active? Press MUTE to switch sound mute on or off. ●● Is the volume set to the minimum? ●● Check connections and setting of external equipment.
HDMI Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Sound is unusual ●● Set the sound setting of the connected equipment to “2ch L.PCM”. ●● Check the HDMI Input setting in the Sound Menu. Watching > For best audio > Advanced settings ●● If digital sound connection has a problem, select analogue sound connection.
Network Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Cannot connect to the network ●● Check the LAN cable or wireless LAN is connected properly. Network > Network connections ●● Check the connections and settings. Network > Network connections Network > Network settings ●● Check the network equipment and network environment.
Cannot operate internet content ●● Check the connections and settings. Network > Network connections > Internet connection Network > Network settings ●● The server or connected line may be busy now.
Other Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. VIERA Link function does not work and an error message appears ●● Check the connections. Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● Turn the connected equipment on and then switch the TV on.
LED does not turn to red in Standby mode ●● LED turns to orange in Standby mode in the following conditions: – Recording is in progress – Timer Programming is set. – DLNA Server is set to On. – Powered On by Apps is set to On. – Home Streaming is set to Always. – TV Anywhere is set to On. – Powered On by Easy Mirroring is set to On. When pushed with a finger, the display panel moves slightly and makes a noise ●● There is a little gap around the panel to prevent damage to the panel.
Maintenance Care and Cleaning First, remove the mains plug from the mains socket. ■■Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Optional accessories Wall-hanging bracket ■■Wall-hanging bracket ●● Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. = Warning = ●● Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.
Licence Licence Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. DVB and the DVB logos are trademarks of the DVB Project. SDXC Logo is a trademark of SD-3C, LLC. “AVCHD” and “AVCHD Progressive” are trademarks of Panasonic Corporation and Sony Corporation. DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
“PlayReady” is a trademark registered by Microsoft. Please be aware of the following. (a) This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. (b) Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof. Contact Information: cdrequest@unipf.
Ver.3.
