TX-39ASW754 TX-42ASW754 TX-47ASW754 TX-55ASW754 TX-47ASF757 TX-55ASF757 TX-47ASN758 TX-55ASN758 TX-47AST756 TX-55AST756 TX-47ASX759 TX-55ASX759 e HELP English
my Home Screen my Home Screen • Information 12 • How to use 13 • Settings 14 • OSD Colour 16 APPS List • Information 17 • How to use 17 • Settings 18 Watching Basic • Satellite connection 19 • Basic connection 21 • Selecting channel 23 • Information banner 25 • Option Menu 27 • Subtitle 29 • Last view 29 • Off Timer 30 • Energy saving functions 30 • Adjusting time 32 • Language 32 External equipment • External connection 33 • Watching external input 37 • Operating with TV’s
• Ambient Sensor 46 • Aspect 46 • Aspect Control Signal 48 • Basic settings 50 • Noise reduction settings 51 • Advanced Settings 52 • Option Settings 56 • Screen Settings 58 • Copy Adjustment 59 For best audio • Sound mode 60 • Basic settings 61 • Volume settings 62 • Voice Guidance Settings 64 • Audio Description 65 • Advanced settings 66 TV Guide • Using TV Guide 68 • Timer Programming 71 Teletext • Viewing Teletext 73 • Teletext mode 75 • Teletext Character Set 76 3D • No
• Channel List 86 • Auto Setup 88 • Manual Tuning 92 • Update Channel List 94 • New Channel Message 95 • Signal Condition 95 • Other settings 95 • Selectable satellites 96 Recording USB HDD setup • Preparations 97 • Setting for USB HDD 99 Recording current programme • One Touch Recording 101 • REW LIVE TV 102 Timer Programming • Setting Timer Programming 104 • Editing Timer Programming 106 • Remote recording 107 • Note 108 Technical information • USB HDD 109 Media Player Using Media Pla
• Multi Shot 3D 117 • Using Slideshow 118 Video mode • Selecting file 122 • Watching video 123 • Video Setup 125 • Audio output settings 126 Recorded TV mode • Selecting content 127 • Watching recorded TV 128 • Grouping contents 129 • Deleting content 129 • Changing device 130 • Chapter List 130 • Audio output settings 131 Music mode • Selecting file 132 • Playing music 133 • Music Setup 134 Technical information • Device handling caution 135 • SD Card 135 • USB de
DLNA • Information 145 • Using DLNA 149 Network connections • Internet connection 150 • DLNA connection 151 • Note 153 Network settings • Network Connection 154 • Custom - Wireless 155 • Custom - Wired 158 • Custom - Wireless Access Point 159 • Network Status 160 • my Home Cloud Settings 161 • VIERA Name 161 • TV Remote App Settings 161 • Network Link Settings 163 • DVB-via-IP Server Settings 164 • TV Anywhere Settings 164 • File Sharing Settings 164 • Software Update 165 • New Software Message 16
• Playing music 175 • Music Setup 175 DIGA Recorder • Controlling DIGA Recorder 176 Technical information • Photo format 177 • Video format 178 • Music format 181 Functions User profile • Information 182 • Settings 182 • my Stream 184 Voice Control • Preparations 185 • How to use 186 Touch Pad Controller • Information 187 • My button 187 • Settings 188 DVB-via-IP • DVB-via-IP server connection 189 • DVB-via-IP Server Settings 191 • DVB-via-IP client connection 192 • DVB-via-IP
VIERA Link “HDAVI Control™” • Summary of VIERA Link 200 • Preparations 204 • Easy playback 205 • Power on Link 205 • Power off Link 205 • Standby Power Save 205 • Intelligent Auto Standby 206 • VIERA Link Control 206 • Speaker Selection 208 • Note 209 Child Lock • Using Child Lock 210 • PIN number 211 • Parental Rating 211 Data Service Application • Using Data Service Application 212 • Cookie 212 • Note 213 Common Interface • Caution 214 • Using Common Interface 215 Shipping Condition •
Keyboard • Keyboard 222 Settings Setting menu • How to use 223 Picture • Viewing Mode 225 • Basic settings 225 • Ambient Sensor 226 • Noise reduction settings 226 • Advanced Settings 226 • Option Settings 227 • Screen Settings 228 • 3D Settings 229 • Copy Adjustment 230 • Reset to Defaults 230 Sound • Mode 231 • Basic settings 231 • Volume settings 232 • Voice Guidance Settings 233 • Audio Description 234 • Advanced settings 235 • Reset to Defaults 235 Network • Network Connection 236 •
• TV Anywhere Settings 236 • File Sharing Settings 237 • Other settings 237 Timer • Off Timer 238 • Timer Programming 238 • Time Zone 238 • Auto Standby 238 • No signal Power off 238 Setup • Eco Navigation 239 • Voice Control Settings 239 • User Settings 239 • USB Device Setup 239 • Recording Setup 239 • VIERA Touch Pad Controller 239 • Bluetooth Setup 240 • Child Lock 240 • Tuning Menu 240 • Language 242 • Display Settings 243 • Common Interface 245 • VIERA Link Settings 245 • Data Service Application
• HDMI 254 • Network 255 • Other 256 Maintenance • Care and Cleaning 258 Information • Using Help menu 259 Optional accessories • 3D Eyewear 260 • Communication Camera 260 • Wall-hanging bracket 261 Licence • Licence 262 OK Menu ●● Letters enclosed in a box indicate remote control buttons. Letters in cyan indicate on-screen display items. References in this eHELP The images shown in this eHELP are for illustrative purposes only.
my Home Screen my Home Screen Information “my Home Screen” is a gateway to the TV, applications, and more. It provides easy access to special features such as Media Player, videos, games, communication tools, etc. as shown below (example). HOME OK OK HOME Home Screen Selected content screen (TV, application, etc.) Home Screen Selection – Your preferred Home Screen can be selected.
How to use Home Screen provides access to special features such as Media Player, TV, internet content, data services, communication tools, etc. 1. Display Home Screen with HOME. (Example) ●● The last viewed Home Screen is displayed when the TV is turned on. ●● Press again to select or add your preferred Home Screen layout. my Home Screen > my Home Screen > Settings 2. Select a feature with ●● / / / and press OK to access.
Settings Select the setup menu from the tool guide on the top of the screen. (Example) ■■Home Screen Selection 1. Display Home Screen Selection with HOME. (Example) 2. Select the screen with / and press OK to set. Full Screen TV: Displays full-screen TV. TV Home Screen: To make your TV experience more convenient and comfortable Lifestyle Screen: Displays the TV with useful information and services for everyday life. Info Screen: Enjoy internet content while watching TV.
■■Face Recognition / Voice Print Recognition By using the Communication Camera and Voice Control function, this TV recognises your face / voice and displays the registered Home Screen. ●● Say “my Home Screen” into the microphone of the Touch Pad Controller to use this function. ●● To use this function, you need to set up a user profile and register face / voice data, preferred Home Screen, etc. Functions > User profile > Settings ●● Communication Camera is not included. Please purchase as necessary.
OSD Colour 1. Display the menu with MENU. 2. Select Setup > Display Settings > OSD Colour with to access. 3. Set with / / and press OK and press OK to store. OSD Colour (Jet black / Pale grey / Organic brown / Sand beige) Selects the preferred colour type of on-screen displays. ●● This function is available for the information banner, menu screen, Home Screen, etc.
APPS List Information Various applications (internet contents, network contents, Media Player, etc.) can be accessed easily from APPS List. ■■APPS List (Example) = Note = ●● APPS List is subject to change without notice. How to use You can access special features such as internet contents, network contents, Media Player, etc. from APPS List. 1. Display APPS List with APPS. (Example) ●● To exit APPS List EXIT 2. Select an icon of the features with / / / and press OK to access.
Media Player Media Player > Using Media Player > Selecting device / mode Recorded TV Media Player > Recorded TV mode Media Server Network > DLNA > Using DLNA VIERA Link Functions > VIERA Link “HDAVI Control™” Multi Window Functions > Multi Window Settings You can customise APPS List (screen settings, etc.). 1. Display APPS List with APPS. 2. Select the icon for settings on APPS List with to access. / 3. Follow the on-screen instructions. = Note = ●● Setup menu items may be changed without notice.
Watching Basic Satellite connection Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●● For DVB-S ■■Dual Tuner (DiSEqC) Connect the both of satellite IN 1 / IN 2 terminals to the satellite dish with Multi Switcher, and you can watch or record 2 DVB-S programmes simultaneously, etc.
■■Single Tuner Connect the satellite IN 1 terminal to the satellite dish. ●● Watching or recording 2 DVB-S programmes simultaneously, etc. are not available. Satellite IN 1 terminal Satellite cable Satellite dish = Note = ●● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details.
Basic connection Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables.
■■DVD Recorder (VCR) / Set top box HDMI terminal HDMI cable Set top box Cable AV1 (SCART) terminal SCART cable Terrestrial / cable terminal RF cable DVD Recorder / VCR Terrestrial aerial = Note = ●● For DVB-via-IP connections Functions > DVB-via-IP ●● For VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link ●● External equipment and cables shown are not supplied with this TV. ●● Please also read the manual of the equipment being connected.
Selecting channel 1. Display TV Selection with TV. 2. Select the mode with / and press OK to set. DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue ●● The selectable modes vary depending on the channels stored. ●● You can also select the mode pressing TV repeatedly. ●● If TV Selection is not displayed, press TV to switch the mode. 3. Select a channel with Channel Up / Down or Numeric buttons. ●● Press Numeric buttons to select a channel position with 2 or more-digit (e.g. 399, press ).
■■To select a channel using TV Guide 1. Display TV Guide with GUIDE. 2. Select the current programme with access. / / / and press OK to – The current programme is displayed on the top left of the screen. 3. Select View with / and press OK to watch. (DVB) Watching > TV Guide > Using TV Guide ●● The postcode entry or update may be required depending on the country you select. Follow the on-screen instructions.
Information banner Display information banner with ●● . Also appears when changing a channel. (Example) Channel position and name Channel type (Radio, HDTV, etc.) / Encrypted channel ( TV mode ( , , , , ) )/ Programme Start time / End time (except Analogue) Channel position, etc. (Analogue) Progress time indicator of the selected programme (except Analogue) Category ●● To change the category (DVB) 1) Display the category list with 2) Select the category with / (blue). and press OK to change.
: Teletext service available : Multiple audio available : Multiple video available : Multiple audio and video available Stereo, Mono: Audio mode : Data service (Hybrid Broadcast Broadband TV application) available Functions > Data Service Application > Using Data Service Application 1 – 90: Off Timer remaining time Watching > Basic > Off Timer ●● To confirm another tuned channel / ●● To watch the channel listed in the banner OK ●● Information on the next programme (DVB) ●● Extra information (DVB) –
●● To display the introduction banner for the internet service 1) Display the menu with MENU. 2) Select Setup > Display Settings > Smart Banner with OK to access. 3) Select On / Off with / / and press and press OK to set. Option Menu Confirm or change the current status. 1. Display the option menu with OPTION. 2. Select one of the following items with / and press OK to access.
Multi Audio Selects between alternative language or Audio Description for sound tracks (if available). ●● This setting is not memorised and it will return to the default setting once you exit the current programme. ●● For DVB Dual Audio Selects stereo / monaural (if available). ●● For DVB Sub Channel Selects the multifeed programme - sub channel (if available). ●● For DVB Subtitle Language Selects the language for subtitles (if available).
CAM Selection Selects CI module (if available). ●● Not valid while the recording is in progress ●● For DVB Subtitle Display / hide subtitles (if available) with STTL. ●● To select the preferred language for DVB subtitles (if available), set Preferred Subtitles. Watching > Basic > Language ●● To select the preferred subtitle type 1) Display the menu with MENU. 2) Select Setup > Display Settings > Preferred Subtitle Type with and press OK to access.
Off Timer Turn the TV Standby mode automatically after a fixed period. 1. Display the menu with MENU. 2. Select Timer > Off Timer with / and press OK to access. 3. Select the time in 15-minute increments with / and press OK to set. 90 / 75 / 60 / 45 / 30 / 15 / Off (minutes) ●● To cancel, set to Off or turn the TV off. ●● The remaining time displays on the information banner.
■■No signal Power off 1. Display the menu with MENU. 2. Select Timer > No signal Power off with 3. Select On / Off with / / and press OK to access. and press OK to set. No signal Power off (On / Off) Automatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is performed for 10 minutes. ●● The notification message will appear 3 minutes before going into Standby mode.
Adjusting time Adjusts the time data. 1. Display the menu with MENU. 2. Select Timer > Time Zone with 3. Set with ●● / / and press OK to access. and press OK to store. The time data will be corrected based on GMT. Language 1. Display the menu with MENU. 2. Select Setup > Language with / and press OK to access. 3. Select one of the following items with / and press OK to access. OSD Language / Preferred Audio 1 / 2 / Preferred Subtitles 1 / 2 / Preferred Teletext 4.
External equipment External connection These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment. ●● For basic connection Watching > Basic > Basic connection ●● To use the specific devices supporting Bluetooth wireless technology Functions > Bluetooth devices ●● Check the terminal type and cable plugs are correct when connecting.
■■AV devices AV2 (COMPONENT) terminals Component cables DVD Player AV2 (VIDEO) terminals Composite cables Camcorder / Game equipment - 34 -
■■USB devices USB port USB cable USB HDD / Communication Camera = Note = ●● It is recommended to connect the device to the TV’s USB port directly. ●● You cannot use two or more of the same kind of USB devices simultaneously except USB Flash Memory or USB HDD. ●● Use USB 3 port for connecting the USB HDD. ●● Use USB 1 port for connecting the Communication Camera. ●● Some USB devices or USB HUB may not be used with this TV. ●● You cannot connect any devices by using USB card reader.
■■Headphones Headphone jack M3 stereo mini plug Headphones ●● To adjust volume, set Headphone Volume. Watching > For best audio > Advanced settings ●● To select the sound output to adjust volume, set Speaker Setting.
Watching external input Connect the external equipment (VCR, DVD, etc.) and you can watch through the input. 1. Display the input selection menu with AV. 2. Select the input mode connected to the equipment with / and press OK to watch. (The selected mode is displayed on the top left of the screen.) ●● TV receives input signals automatically connecting with SCART when playback starts. – Input signals are automatically identified by the SCART (pin 8) terminal.
■■Input Labels Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in TV Selection, Input Selection or banner. Watching > Basic > Information banner 1. Display the menu with MENU. 2. Select Setup > Display Settings > Input Labels with to access. 3. Set with / / / / and press OK and press OK to set. ●● To name each input mode freely, select User input and set characters (maximum 10 characters).
Operating with TV’s remote control You can operate the contents in Media Player / media server, recording functions or the connected equipment with the below buttons of this TV’s remote control.
■■How to change the code Each Panasonic product has its own remote control code. Change the code according to the product for operation. 1. Press and hold Standby On / Off switch during the following operations. 2. Enter the appropriate code as follows with Numeric buttons. ●● Codes for each product and features 70: DVD Recorder, DVD Player, Blu-ray Disc Player 71: Player theatre, Blu-ray Disc theatre 72: VCR 73 (default): Using in USB HDD recording, Media Player, DLNA features or VIERA Link 3.
HDMI features HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using a fully wired HDMI compliant cable.
= Note = ●● Audio settings can be made on HDMI Input in the Sound Menu. Watching > For best audio > Advanced settings ●● If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”. ●● These HDMI connectors are “type A”. ●● These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
Terminal information ■■AV1 (SCART) terminal (RGB, VIDEO) 1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 : 9 : 10: 11 : Audio out (R) Audio in (R) Audio out (L) Audio earth Blue earth Audio in (L) Blue in Status CVBS Green earth -Green in 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: - 43 - -Red earth Earth Red in Status RGB CVBS earth RGB status earth CVBS out (video) CVBS in (video) Socket Earth
■■HDMI terminal 1 : TMDS Data2+ 11 : TMDS Clock Shield 2 : TMDS Data2 Shield 12: TMDS Clock− 3 : TMDS Data2− 13: CEC 4 : TMDS Data1+ 14: Utility 5 : TMDS Data1 Shield 15: SCL 6 : TMDS Data1− 16: SDA 7 : TMDS Data0+ 17: DDC/CEC Ground 8 : TMDS Data0 Shield 18: +5V Power 9 : TMDS Data0− 19: Hot Plug Detect 10: TMDS Clock+ Valid input signals ■■COMPONENT, HDMI Signal name COMPONENT HDMI 525 (480) / 60i, 60p ○ ○ 625 (576) / 50i, 50p ○ ○ 750 (720) / 60p, 50p ○ ○ 1 125 (1 080) / 6
For best picture Viewing Mode 1. Display the menu with MENU. 2. Select Picture > Viewing Mode with 3. Select the mode with / / and press OK to access. and press OK to set. Viewing Mode (Dynamic / Normal / Cinema / True Cinema / Custom) Selects your favourite picture mode for each input. Dynamic: Improves contrast and sharpness for viewing in a bright room. Normal: Normal use for viewing in a normal lighting condition.
Ambient Sensor 1. Display the menu with MENU. 2. Select Picture > Ambient Sensor with 3. Select On / Off with / / and press OK to access. and press OK to set. Ambient Sensor (On / Off) ●● Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting conditions. Aspect Change the aspect ratio (image size) with ASPECT. ■■To change the aspect ratio manually 1. Display Aspect Selection with ASPECT. 2. Select the mode with ●● / and press OK to set.
4:3 Full: Displays a 4:3 image enlarged horizontally to fit the screen. ●● For HD (High definition) signals Sidecut Just: Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching is only noticeable at the left and right edges. ●● For HD (High definition) signals Sidecut Zoom: Displays a 16:9 letterbox (anamorphic) image full-screen without distortion. ●● For HD (High definition) signals = Note = ●● Display the image (TV, external input, etc.) full-screen to use this function completely.
Aspect Control Signal Programmes usually contain an “Aspect Control Signal”. (Widescreen signal, Control signal through SCART / HDMI terminal) In Auto mode, aspect mode will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI terminal is found. The aspect will switch to the appropriate ratio.
●● AV1 (SCART) terminal / AV2 (VIDEO) terminals Valid input signal format: PAL SECAM PAL 525/60 M.
Basic settings 1. Display the menu with MENU. 2. Select Picture with / and press OK to access. 3. Select one of the following items with / and press OK to access. Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour Temperature / Vivid Colour / Adaptive Backlight Control / Intelligent Frame Creation / 24p Smooth Film 4. Set with / / / and press OK to store.
24p Smooth Film (Max / Mid / Min / Off) Automatically compensates the picture frame rate to make the 24p source movie images smooth. ●● This function is available only for 24p signal input and displayed instead of Intelligent Frame Creation. ●● Not valid in multi window mode, photo contents of Media Player / Network services or when Game Mode is set to On Noise reduction settings 1. Display the menu with MENU. 2. Select Picture > Noise Reduction / MPEG Remaster with OK to access. 3.
Advanced Settings You can adjust and set up the detailed picture settings when Viewing Mode is set to Cinema, True Cinema or Custom. The settings in True Cinema or Custom can be stored for each input. Watching > For best picture > Viewing Mode 1. Select the input mode with AV or TV. 2. Display the menu with MENU. 3. Select Picture > Viewing Mode with 4. Select the mode with / / and press OK to access. and press OK to set. Cinema / True Cinema / Custom ■■Adjust the detailed picture settings 1.
■■White Balance R-Gain / G-Gain / B-Gain Adjusts the white balance of bright red / green / blue areas. R-Cutoff / G-Cutoff / B-Cutoff Adjusts the white balance of dark red / green / blue areas. More Detailed Adjustment Adjusts more detailed items of White Balance. Input Signal Level: Adjusts the input signal level. R-Gain / G-Gain / B-Gain: Adjusts the detailed white balance of bright red / green / blue areas. Reset to Defaults: Resets items of More Detailed Adjustment.
■■Colour Management R-Hue / R-Saturation / R-Luminance Adjusts the picture hue / saturation / luminance of red areas. G-Hue / G-Saturation / G-Luminance Adjusts the picture hue / saturation / luminance of green areas. B-Hue / B-Saturation / B-Luminance Adjusts the picture hue / saturation / luminance of blue areas. More Detailed Adjustment Adjusts more detailed items of Colour Management. Y-Hue / C-Hue / M-Hue: Adjusts the picture hue of yellow / cyan / magenta areas.
■■Gamma Gamma Switches the gamma curve. ●● Please note the numerical values are reference for the adjustment. More Detailed Adjustment Adjusts more detailed items of Gamma. Input Signal Level: Adjusts the input signal level. Gain: Adjusts the gain of gamma for selected signal level. Reset to Defaults: Resets items of More Detailed Adjustment. Reset to Defaults Resets Gamma to the default settings. ■■Reset to Defaults Reset to Defaults Resets Advanced Settings to the default settings.
Option Settings 1. Display the menu with MENU. 2. Select Picture > Option Settings with / and press OK to access. 3. Select one of the following items with / and press OK to access. Game Mode / Film Cadence Mode / 1080p Pure Direct / HDMI Content Type / HDMI RGB Range / AV Colour System / 3D-COMB 4. Set with / and press OK to store. Game Mode (On / Off) Provides suitable images for fast response signals when playing games.
HDMI Content Type (Graphics / Photos / Auto / Off) Adjusts the picture settings of each HDMI input according to the selected content type. Auto: Automatically adjusts the picture settings according to the received HDMI content if the connected equipment supports HDMI Content Type. ●● To set the availability of each content type for Auto mode, select Auto Detail Setting. ●● For HDMI input HDMI RGB Range (Auto / Full / Normal) Adjusts the black level of the image for each HDMI input.
Screen Settings 1. Display the menu with MENU. 2. Select Picture > Screen Settings with / and press OK to access. 3. Select one of the following items with / and press OK to access. 16:9 Overscan / H-Size / Zoom Adjustments / Multi Window / Screen Display 4. Set with / and press OK to store. 16:9 Overscan (On / Off) Selects the screen area displaying the image for 16:9 aspect. On: Enlarges the image to hide the edge of the image. Off: Displays the image in the original size.
Screen Display (On / Off) Turns the screen off when you select Off. ●● This function is effective in reducing power consumption when listening to the sound without watching the TV screen. ●● Press any buttons (except Standby On / Off switch) to turn the screen on. Copy Adjustment Copies the picture settings of True Cinema or Custom to those of the other input mode or Viewing Mode. 1. Display the menu with MENU. 2.
For best audio Sound mode 1. Display the menu with MENU. 2. Select Sound > Mode with 3. Select the mode with / / and press OK to access. and press OK to set. Mode (Standard / Music / Ambience / User) Selects your favourite sound mode for each input. Standard: Provides the suitable sound quality for all types of scenes. Music: Improves sound quality for watching music videos, etc. Ambience: Improves spatial effects and provides clear sounds.
Basic settings 1. Display the menu with MENU. 2. Select Sound with / and press OK to access. 3. Select one of the following items with / and press OK to access. Bass / Treble / Equaliser / Balance / Surround / Bass Boost 4. Set with / / / and press OK to store. Bass Adjusts level to enhance or minimise lower, deeper sound output. Treble Adjusts level to enhance or minimise sharper, higher sound output. Equaliser Adjusts the frequency level to suit your favourite sound quality.
Surround (Diffuse Surround / Virtual Surround / Off) ASF757, ASN758, AST756, ASX759 series (Virtual Surround / Off) ASW754 series Selects surround sound settings. Diffuse Surround ASF757, ASN758, AST756, ASX759 series: Provides a more progressive enhancer and reverberation to simulate improved spatial effects. Virtual Surround: Provides a dynamic enhancer of width and depth to simulate improved spatial effects. ●● This function is effective only for the sound from TV speakers.
Auto Gain Control (On / Off) Automatically regulates large sound level differences between channels and inputs. Volume Correction Adjusts the volume of each individual channel or input mode. Speaker Distance to Wall (Up to 30cm / Over 30cm) Compensates for the low frequency sound due to the distance between the speakers and the wall. ●● If the back space between the TV and wall is within 30 cm, Up to 30cm is recommended.
Voice Guidance Settings 1. Display the menu with MENU. 2. Select Sound > Voice Guidance Settings with access. 3. Select one of the following items with / / and press OK to and press OK to access. Voice Guidance / Speed / Volume / Language / User Level / Web Browser 4. Set with / / / and press OK to store. Voice Guidance (On / Off) Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users.
Audio Description 1. Display the menu with MENU. 2. Select Sound > Audio Description with 3. Select one of the following items with / / and press OK to access. and press OK to access. Preferred Audio Type / Volume / Speakers / Headphones 4. Set with / / / and press OK to store. Preferred Audio Type (Standard / Audio Description) Narration settings for visually impaired users Set to Audio Description to activate the narration sound track when available on the broadcast.
Advanced settings 1. Display the menu with MENU. 2. Select Sound with / and press OK to access. 3. Select one of the following items with / and press OK to access. MPX / Audio Preference / SPDIF Selection / SPDIF Delay / HDMI Input 4. Set with / and press OK to store. MPX Selects multiplex sound mode (if available). Stereo: Use this normally.
●● MPEG is an audio compression method that compresses audio to the smaller size without any considerable loss of audio quality. ●● Dolby Digital Plus and HE-AAC are the technologies for HD (High definition) programmes. ●● For DVB SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals. ●● SPDIF is a standard audio transfer file format.
TV Guide Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). 1. Display TV Selection with TV. 2. Select the mode with / and press OK to set. DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue 3. Display TV Guide with GUIDE. ●● Press again to change the layout. (Landscape / Portrait) – View Landscape to see several channels.
(Example) TV screen Date Time Programme D (DVB-T) / A (Analogue) Channel position and name ●● To watch the programme 1) Select the current programme with access. / / / and press OK to – The current programme is displayed on the top left of the screen. 2) Select View with / and press OK to watch.
●● To search programme titles and view a list of the searched programmes (DVB) (if available) 1) Display the search list with 2) Select Search with / 3) Enter characters with (yellow). and press OK to access. / / / and press OK to set. – You can set characters using Numeric buttons. Functions > Setting characters > Using Numeric buttons 4) Press (green) to start searching. – All the programme titles including the word you set will be listed.
Postcode: Sets your postcode to receive local information in the GUIDE Plus+ system (only available in some countries). System Information: Displays the system information of the GUIDE Plus+ system (only available in some countries). ●● DVB-T and Analogue channels are displayed on the same TV Guide screen. D and A may be displayed to distinguish DVB-T and Analogue channels. There will be no programme listings for Analogue channels.
■■Signal Supported Recording Signal Supported Recording is Timer Programming which is controlled by information from the TV Guide; if programme start and end times are changed by the broadcaster, the timer event will follow the change. Note that Signal Supported Recording only works reliably if correct information is received from broadcasters. ●● ●● The availability of this function depends on the country and TV mode you select. is displayed on the timer event if Signal Supported Recording is set.
Teletext Viewing Teletext 1. Switch to teletext with TEXT. ●● Displays the index page (content varies depending on the broadcasters). ●● Current / sub page numbers are displayed on the top left of the screen. ●● Time / date is displayed on the top right of the screen. ●● Colour bar is displayed on the bottom of the screen. 2. Select the page with Numeric buttons, (coloured buttons). ●● / or To adjust contrast 1) Press MENU three times to display Contrast.
■■Watch TV and teletext in two windows at once 1. Press MENU twice. 2. Set Picture and text to On / Off with ●● / . Operations can be made only in teletext screen. ■■Store frequently viewed pages in the colour bar (List mode) 1. Press (coloured buttons) while the page is displayed. 2. Press and hold OK. ●● The stored page number changes to white. ●● To change stored pages 1) Press (coloured buttons) to change. 2) Enter a new page number with Numeric buttons. 3) Press and hold OK.
Teletext mode Teletext services are the text information provided by the broadcasters. ●● The features may vary depending on the broadcasters. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Teletext with access. 3. Select TOP (FLOF) / List with / / and press OK to and press OK to set. ■■FLOF (FASTEXT) mode (in case of FLOF (FASTEXT) broadcasting) In FLOF mode, four differently coloured subjects are situated on the bottom of the screen.
Teletext Character Set Selects teletext language font. 1. Display the menu with MENU. 2. Select Setup > Display Settings > Teletext Character Set with press OK to access. 3. Select the font with / / and and press OK to set. West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc. East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc. East2: Czech, Hungarian, Lettish, Polish, Rumanian, etc.
3D Note ●● Display the image (TV, external input, etc.) full-screen for viewing 3D. ●● Do not exert pressure on or scratch the lens of the 3D Eyewear. ●● 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front. ●● When viewing 3D images, make sure your eyes are at an approximately horizontal level and keep a position where you do not see double images. ●● Do not wear the 3D Eyewear when watching something other than 3D images.
Viewing 3D You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. ●● This TV supports Frame Sequential, Side by Side and Top and Bottom 3D formats. – Frame Sequential is the 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back. 1. Put the 3D Eyewear on. 2. View the 3D images. ●● Safety precautions will be displayed when you first watch the 3D image.
3D Mode Selection You can easily change the viewing mode between 2D and 3D with 3D. 1. Display 3D Mode Selection with 3D. 2. Select the mode with ●● / and press OK to set. Items of 3D Mode Selection vary depending on the condition. 3D / 2D: Displays the appropriate image as you desire without selecting 3D format. ●● This mode may not work properly depending on the source image format. In this case, select the appropriate 3D format manually.
3D Settings 1. Display the menu with MENU. 2. Select Picture > 3D Settings with / 3. Select one of the following items with and press OK to access. / and press OK to access. 3D Detection / 3D Signal Message / 2D→3D Depth / 3D Adjustment / L/R Picture Swap / Edge Smoother / Safety Precautions 4. Set with ●● / and press OK to store. To exit the menu screen EXIT 3D Detection (On (Advance) / On / Off) Selects whether to switch to the 3D mode automatically or not.
3D Adjustment (On / Off) Adjustment of the 3D effect (except in 2D→3D mode) Set to On to enable Effect setting. ●● When setting to On, a safety precaution message will appear. Read it carefully and press BACK/RETURN to go to Effect setting. ●● When adjusting, take into account that the vision of 3D images varies among different individuals. Effect: Adjusts the 3D depth according to the contents or to your preference. (This setting will not be memorised when changing the input mode or channel.
Source image format If the picture appears to be abnormal, refer to the table of images that can be seen for each 3D Mode Selection (Manual) and the source image format, and select the correct 3D mode. ●● 3D images are displayed correctly with appropriate 3D format as following yellow boxes.
Tuning and editing channels Setting menu You can retune channels, create your favourite channel lists, skip unwanted channels, etc. 1. Display TV Selection with TV. 2. Select the mode with / and press OK to set. DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue 3. Display the menu with MENU. 4. Select Setup > Tuning Menu with / and press OK to access. DVB-S Tuning Menu / DVB-C Tuning Menu / DVB-T Tuning Menu / DVBvia-IP Tuning Menu / Analogue Tuning Menu ●● The menu name varies depending on the TV mode.
Favourites Edit ■■List favourite DVB channels Create your favourite channel lists from various broadcasters (up to 4: Favourites 1 to 4). The favourites lists are available from Category in the information banner and the TV Guide screen. Watching > Basic > Information banner Watching > TV Guide > Using TV Guide 1. Select Favourites Edit with / and press OK to access. 2. Select a channel to list from all DVB channels with ●● ●● / . appears when the channel is encrypted.
■■Edit DVB favourites list You can edit the favourites list while the cursor is on the channel in the favourites list. ●● To move the channel 1) Select the channel with 2) Press / . (green). 3) Select the new position with 4) Press ●● / or Numeric buttons. (green) to store. To delete the channel 1) Select the channel with / . 2) Press OK to delete. – Press ●● (yellow) to delete all channels. To name the favourites 1) Press (red).
Channel List ■■Skip unwanted DVB / Analogue channels You can hide (skip) unwanted channels. The hidden channels cannot be displayed except in this function. 1. Select Channel List with 2. Select a channel with / / and press OK to access. . 3. Press OK to set Reveal / Hide (skip).
●● To rename the channel name (Analogue) 1) Press (blue) to edit. 2) Enter characters (maximum 5 characters) with Numeric buttons, and press OK to set. / / / or 3) Press BACK/RETURN to store. ●● To exchange channel list (DVB-S) 1) Display the menu with MENU. 2) Select Setup > Other Settings > Exchange Channel List with and press OK to access. / 3) Follow the on-screen instructions. – During the operation, remove USB devices other than the USB Flash Memory used for this function.
Auto Setup Automatically retunes the channels received in the area. ●● This function is available if channel tuning is already performed. ●● Only the selected mode is retuned. All the previous tuning settings are erased. ●● Child Lock PIN number is required to retune locked channels. Functions > Child Lock > PIN number ●● If tuning has not been done completely, set Manual Tuning. Watching > Tuning and editing channels > Manual Tuning ■■DVB-S 1. Select Antenna System with / and press OK to access.
2) Set Satellite for the selected LNB. – Select No Satellite if you do not know the connected satellite. (Available satellite will be searched in Auto Setup.) – Select User defined to set Test Transponder Frequency manually. – If you set to Single Cable, additional settings are required. Set User Band, User Band Frequency and PIN (depending on the Single Cable router you use). For details, read the manual of the Single Cable router. Watching > Tuning and editing channels > Selectable satellites 5.
■■DVB-C, DVB-T, Analogue 1. Select Auto Setup with / and press OK to access. 2. Set DVB-C Auto Setup Settings with (DVB-C) ●● / / / and press OK to store. Scan Mode Full: Scans the whole frequency range. Quick: Scans the suitable frequency in your country. ●● Normally set Frequency, Symbol Rate and Network ID to Auto. If Auto is not displayed or if necessary, enter each value specified by your cable provider with Numeric buttons.
■■DVB-via-IP ●● Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-IP client connection Network > Network settings 1. Select Auto Setup with / and press OK to access. 2. The confirmation screen is displayed and press OK to access. 3. Select a server from Server List. 1) Select a server with / and press OK to set. 2) Select Search Channels with 4. Select search mode with / / / / and press OK to access. and press OK to access. 5.
Manual Tuning ●● Normally use Auto Setup or Update Channel List to retune DVB channels. ●● If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function. (DVB) ●● All DVB channels found will be added to Channel List. ■■DVB-S ●● Please consult the received satellite broadcasting companies for the setting. 1. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation / Service ID with / and set with / or Numeric buttons. 2.
■■Analogue Set Analogue channel manually after Auto Setup. ●● Set Sound System and Colour System, and then perform this function. Normally set Colour System to Auto. – SC1: PAL B, G, H / SECAM B, G – SC2: PAL I – SC3: PAL D, K / SECAM D, K – F: SECAM L, L’ 1. Select the channel position with Numeric buttons. 2. Select the channel with Channel Up / Down. 3. Search with / 4. Select Store with . / and press OK to set.
■■DVB-via-IP (DVB-C) 1. Select Scan Mode / Network ID / Frequency / Symbol Rate / Modulation with / and set with / or Numeric buttons. ●● Normally set Symbol Rate to Auto. 2. Select Start scan with / and press OK to search. ■■DVB-via-IP (DVB-T) 1. Select Frequency / Bandwidth / Modulation / FEC / Service ID with / or Numeric buttons. and set with 2. Select Start scan with / / and press OK to search.
New Channel Message Selects whether to give a notification message when a new DVB channel is found or not. ●● When a notification message appears, you can perform Update Channel List pressing OK. ●● Not valid in DVB-via-IP Signal Condition Selects a channel and checks the signal condition with indicators. ●● A good Signal Strength is not an indication of suitable signal for DVB reception. ●● Vertical lines show the maximum signal value of the selected channel.
Add TV Signal Adds the TV mode. ●● This function is available if you skip any modes to tune in Auto Setup for first using the TV. Selectable satellites ■■Selectable satellites and dish alignment to tune DVB-S channels To ensure your satellite dish is correctly installed, please consult your local dealer. Also please consult the received satellite broadcasting companies for details. ●● Intelsat at 85.
Recording USB HDD setup Preparations You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. ●● Prepare the USB HDD for the exclusive use of recording with this TV. ●● Connect the USB HDD to the USB 3 port with the USB cable. ●● Be sure to connect the USB HDD to the socket outlet. ●● To remove the USB HDD safely from the TV, perform Safely remove USB in USB Device Setup.
= Caution = ●● All data in the USB HDD will be erased in the following cases: – When formatting the USB HDD with this TV Recording > USB HDD setup > Setting for USB HDD – When formatting the USB HDD to use on PC, etc. ●● When the TV is repaired due to a malfunction, you may have to format the USB HDD again with this TV to use it. (All data will be erased after formatting.) ●● To use the USB HDD with your PC after recording with this TV, format it again on your PC.
Setting for USB HDD Format and set up the USB HDD with this TV in order to use it for recording. All the USB devices recognised as a mass storage device will be listed. ●● Please note that USB HDD will be formatted and all data in it will be erased after this setup. ●● Before setting, connect the USB HDD and be sure to turn on the USB HDD. Recording > USB HDD setup > Preparations 1. Display the menu with MENU. 2. Select Setup > USB Device Setup with / and press OK to access. 3.
●● To change the mode OK ●● To edit USB HDD name (green) ●● To format (red) ●● To remove the USB HDD safely from the TV (yellow) = Note = ●● You can only select one USB HDD for recording at a time. ●● You cannot change the settings for the USB HDD while recording is in progress. ●● Ensure that Dual Tuner Mode is set to On in LNB Configuration to record 2 programmes simultaneously in DVB-S.
Recording current programme One Touch Recording Records the current programme to the USB HDD immediately. ●● Confirm the remote control code is “73”. Watching > External equipment > Operating with TV’s remote control 1. Display the menu with MENU. 2. Select Setup > Recording Setup > One Touch Recording with press OK to access. / and 3. Select the maximum recording time 30 / 60 / 90 / 120 / 180 (minutes) with / and press OK to set. ■■To start One Touch Recording Press to start.
REW LIVE TV Records the current programme to the USB HDD constantly within the maximum recordable time. ●● Confirm the remote control code is “73”. Watching > External equipment > Operating with TV’s remote control 1. Display the menu with MENU. 2. Select Setup > Recording Setup > REW LIVE TV with OK to access. 3. Select Auto with / / and press to start REW LIVE TV. ●● When you select Auto, recording will start automatically.
■■To stop REW LIVE TV 1. Display the menu with MENU. 2. Select Setup > Recording Setup > REW LIVE TV with OK to access. 3. Select Off with / / and press to stop REW LIVE TV. ●● If you stop REW LIVE TV, the recorded content for REW LIVE TV will be deleted.
Timer Programming Setting Timer Programming This function allows you to select programmes that you want to be reminded to watch or record to the USB HDD. ●● Not valid in Analogue 1. Display TV Selection with TV. 2. Select the mode with / and press OK to set. DVB-S / DVB-C / DVB-T / DVB-via-IP 3. Display the menu with MENU. 4. Select Timer > Timer Programming with / and press OK to access. ■■Set timer event details 1. Press OK to start making the settings. 2. Select USB HDD Rec. / Reminder with / .
(Example) !: Overlapped timer events Function (USB HDD Rec. / Reminder) TV mode : DVB-S : DVB-C : DVB-T : DVB-via-IP – You cannot change the mode within the menu. Channel position, channel name, etc. STTL: Displays subtitles (if available) – Press (yellow) to indicate subtitles and press again to remove them. – For Reminder : Signal Supported Recording (if available) Watching > TV Guide > Timer Programming Date (You can set one day ahead with .
Editing Timer Programming 1. Display the menu with MENU. 2. Select Timer > Timer Programming with 3. Select the event with ●● / / and press OK to access. . To change a timer event OK – Correct as necessary. Recording > Timer Programming > Setting Timer Programming ●● To delete a timer event 1) Press (red). 2) Press OK to delete. ●● To display subtitles (if available) (yellow) – Press again to remove subtitles.
Remote recording You can set timer programming events of this TV on the network equipment (smartphone, etc.) from outside the home network. ●● Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● Set TV Anywhere to On. Network > Network settings > TV Anywhere Settings ●● Additional information for the services may be found on the following website. http://panasonic.
Note Dual tuner function (watching or recording 2 programmes simultaneously, watching a programme while recording another programme, etc.) is not available while using DVB-via-IP server function. ●● TV Guide may also be used to set timer event. Watching > TV Guide > Timer Programming ●● Timer Programming can store up to 15 events. ●● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider.
Technical information USB HDD ■■USB HDD (for recording the digital TV programmes with this TV) ●● The capacity of USB HDD that works with this TV is from 160 GB to 3 TB. ●● Connect the USB HDD to the socket outlet to record and play back properly with this TV. ●● Use the USB HDD formatted with this TV. Recording > USB HDD setup > Setting for USB HDD ●● Regarding performance, not all USB HDDs are guaranteed.
Media Player Using Media Player Information Media Player allows you to enjoy photo, video or music recorded on the SD Card / USB Flash Memory / network device, and contents recorded with this TV to the formatted USB HDD. (Example) Photo mode: Still pictures recorded with digital cameras will be displayed. Video mode: Moving pictures recorded with digital video cameras and digital video data will be played back.
■■To insert or remove the SD Card Gently insert the SD Card with the label surface facing front. Push the centre of the card until a click is heard. (To remove, push it again.) Label surface Cutout ■■To insert or remove the USB Flash Memory Ensure alignment is straight and complete when inserting or removing. ●● To remove the USB Flash Memory safely from the TV, perform Safely remove USB in USB Device Setup. 1) Display the menu with MENU.
Selecting device / mode 1. Insert the SD Card or USB Flash Memory to the TV. ●● When you insert the SD Card, Media Player will start automatically. Media Player > Using Media Player > Information ●● To play back contents in the USB HDD, ensure the connection and settings are completed. Recording > USB HDD setup ●● To play back contents in the network device, ensure the connection and settings are completed. Media Player > Using Media Player > Network device 2. Display APPS List with APPS. 3.
= Note = ●● You may also access each mode directly from APPS List. my Home Screen > APPS List > How to use ●● Recorded TV is available for contents recorded on the USB HDD with this TV. ●● Select the appropriate device and content for playing back each file. ●● You can use the following buttons during playback. Confirm the remote control code is “73”.
Network device You can enjoy photo, video or music stored in the network devices. ●● To enable this function, connect this TV to your home network. Network > Network connections Network > Network settings ■■How to set User / Password 1. Display the menu with MENU. 2. Select Network > File Sharing Settings > Network Device List with and press OK to access. 3. Select the network device with 4. Enter User / Password with OK to set. / / / and press OK to access.
Photo mode Selecting file Select the file in the thumbnail view with playback. / / / and press OK to start : Error display ●● To change the size of photos in the thumbnail view 1) Display the option menu with OPTION. 2) Select Change Size with ●● / and press OK to change.
Viewing photo ■■Playback ●● To operate Single view : To the previous photo : To the next photo : Stop (return to thumbnail) OK : Slideshow ●● To display / hide the operation guide ●● To rotate 90° (blue) ●● To return to thumbnail BACK/RETURN Sorting photos ■■To sort by folder, recorded date or recorded month 1. Display the view selection in the thumbnail view with (green). 2. Select Folder view / Sort by Date / Sort by Month with OK to set.
Multi Shot 3D This TV can create a 3D photo using a pair of photos and save it. ●● You can only save the image into the SD card. ●● This function is available with photos recorded on digital cameras. ●● Depending on the photos you select, they may not be suitable for creating 3D photos, or creating 3D photos may not be possible. In this case, it is recommended to take a photo (for L) and then move your camera to the right approx. 5 cm and take another photo (for R).
Using Slideshow Slideshow ends when all photos within the current thumbnail are viewed. 1. Select the file from the thumbnail of photos for the first view with / . 2. Start Slideshow with / / (red) and OK. ●● To display / hide the operation guide ●● To pause (return to Single view) OK ●● To return to thumbnail BACK/RETURN ●● You can change the back ground music by setting Back Ground Music in Slideshow Settings (see below). ■■Slideshow Settings Set up the settings for Photo mode. 1.
Gallery (+ calendar) / Gallery: Various sizes of photos in the frames are displayed. ●● You can select whether to display the calendar or not. The month of / . calendar is changed with Cinema: Photos are displayed as old films (sepia tone). Colour Effect (Off / Sepia / Gray scale) Selects the colour effect of photos.
Screen Mode (Normal / Zoom) Selects enlarged or normal viewing. ●● Not valid when Frame is set to Collage, Drift, Gallery, Cinema or when Transition Effect is set to Motion ●● Depending on the photo size, the photo may not be fully enlarged to fill the screen (e.g. portrait style picture). Burst Playback (On / Off) Selects whether to display burst photos in a fast-paced slideshow mode or not.
Back Ground Music (Off / Type1 / Type2 / Type3 / Type4 / Type5 / User / Auto) Selects the background music during Photo mode. Type1 - 5: Music files installed on this TV at the factory settings will be played back. Auto: Music files stored in the current device will be played back. ●● If there is no available music data, no sound will be played back. User: Music files in the device registered by yourself will be played back.
Video mode Selecting file 1. Select the title in the thumbnail view with / / / . : Error display : The file does not support thumbnail view. ●● The preview will start when the title / scene is highlighted in the thumbnail view if it supports a preview. To turn off the preview, set Video Preview to Off. Media Player > Video mode > Video Setup 2. Start playback with ●● ●● (red).
Watching video ■■Playback from the selected scene in the title Playback of the selected scene will start and continue until the end of the title. 1. Select the title with / / / 2. Select the scene with / 3. Start playback with (red). / and press OK to access. / . ●● The structure of titles and scenes may vary depending on the digital video camera used. ●● Playback may not continue depending on the condition.
●● To change aspect 1) Display Aspect Selection with ASPECT. 2) Select the mode with / and press OK to set. Aspect1: Displays the content enlarged without distortion. Aspect2: Displays the content full-screen. Original: Displays the content original size. – You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) – Aspect cannot be changed depending on the content.
Video Setup Set up the settings for Video mode. 1. Display the option menu with OPTION. 2. Select Video Setup with OK. 3. Select one of the following items with / and press OK to access. Video Preview / Multi Audio / Dual Mono Audio / Subtitle / Subtitle Text / Repeat ●● Menu items and selectable options vary depending on the content. 4. Set with / and press OK to store. Video Preview (On / Off) Sets to start the preview of the title or scene in the thumbnail view.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Media Player > Video mode > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection with 3. Select Auto / PCM with / / and press OK to access. and press OK to set.
Recorded TV mode Selecting content ●● For exclusive USB HDD ●● To play back contents in the USB HDD, ensure the connection and settings are completed. Recording > USB HDD setup 1. Contents list of the selected device is displayed in Recorded TV mode. ●● Remaining capacity of the selected device is displayed on the top right. (This value may not be accurate depending on the condition.) ●● Contents list is displayed as All or Not Viewed. All: All the recorded TV programmes are listed.
Watching recorded TV ■■Playback ●● To operate playback : Manual skip – Press to skip forward approx. 30 seconds. – Press and hold to skip backward approx. 15 seconds. : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx. 10 seconds Press and hold / : Search rapidly 3) Jump to the specified time point with OK.
●● To confirm or change the current status (if available) Watching > Basic > Option Menu ●● To return to list BACK/RETURN = Note = ●● The recorded content may not be played back properly depending on the progress of recording. Grouping contents 1. Select the content to edit with contents list. / and press (blue) to tick in the 2. Display the option menu with OPTION. 3. Select Create Group / Release Group / Exclude from Group / Change Protect Status with / and press OK to set.
Changing device You can change the current device to another device directly in the same mode when two or more available devices are connected. 1. Display the option menu with OPTION. 2. Select Drive Select with 3. Select the device with ●● / / and press OK to access. and press OK to access. If you select the device to play back photos, videos or music, change to the appropriate content. 1) Display the option menu with OPTION. 2) Select Contents Select with / and press OK to access.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Media Player > Video mode > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection with 3. Select Auto / PCM with / / and press OK to access. and press OK to set.
Music mode Selecting file 1. Select the folder in the thumbnail view with 2. Start playback with ●● / / (red). For supported file formats Media Player > Technical information > Music format ■■Thumbnail view ●● To display / hide information of the highlighted content ●● To start playback (red) ●● To change the device (yellow) ●● To change the contents (blue) - 132 - / .
Playing music ■■Playback of the selected file in the folder 1. Select the folder with 2. Select the file with / / 3. Start playback with / / / / and press OK to access. . (red). ■■Playback ●● To operate playback : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx.
Music Setup Set up the setting for Music mode. ●● This function is available in the thumbnail view. 1. Display the option menu with OPTION. 2. Select Music Setup > Repeat with OK. 3. Select Off / Folder / One with / and press OK to set.
Technical information Device handling caution ●● Data modified with a PC may not be displayed. ●● Do not remove the device while the TV is accessing data. Otherwise this can damage the device or TV. ●● Do not touch the pins on the device. ●● Do not subject the device to a high pressure or impact. ●● Insert the device in the correct direction. Otherwise this can damage the device or TV. ●● Electrical interference, static electricity, or erroneous operation may damage the data or device.
USB devices ●● It is recommended to connect the device to the TV’s USB port directly. ●● Some USB devices or USB HUB may not be used with this TV. ●● You cannot connect any devices using a USB card reader. ●● Additional information for the devices may be found on the following website. http://panasonic.net/viera/support (English only) ■■USB Flash Memory USB Flash Memory format: FAT16, FAT32 or exFAT ●● USB HDDs formatted on a PC are not guaranteed to work in Media Player.
Photo format ■■Supported Photo formats ●● JPEG (.jpg, .jpeg, .mpo) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Image resolution (pixel): 8 × 8 to 30 719 × 17 279 ●● DCF and EXIF standards ●● Progressive JPEG is not supported. = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Video format ■■Supported Video formats ●● SD-Video (.mod) Video codec: MPEG1, MPEG2 Audio codec: Dolby Digital, MPEG Audio ●● SD-Video Standard Ver. 1.31 (Entertainment Video Profile) ●● The data may not be available if a folder structure on the device is modified. ●● AVCHD (.mts) Video codec: H.264 BP/MP/HP Audio codec: Dolby Digital ●● AVCHD Standard Ver. 2.0 (AVCHD 3D, AVCHD Progressive) ●● The data may not be available if a folder structure on the device is modified. ●● AVI (.
●● MP4 (.f4v, .m4v, .mp4) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MPEG Audio, MP3 ●● This TV supports this container recorded with Panasonic products. For details, read the manual of the products. ●● MKV (.mkv) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP Audio codec: AAC, Dolby Digital, Dolby Digital Plus, DTS core, HE-AAC, MPEG Audio, MP3, Vorbis ●● Some subtitles or chapter functions may not be available.
●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2, VC-1 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, LPCM, MPEG Audio, MP3 ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2, VC-1 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, DTS core, HE-AAC, MPEG Audio, MP3 ■■Supported Subtitles formats ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .
Music format ■■Supported Music formats ●● MP3 (.mp3) ●● AAC / Apple Lossless (.m4a) ●● Copy-protected files cannot be played back. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Copy-protected files cannot be played back. ●● WMA Lossless is not supported. ●● LPCM (.wav) = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names.
Network Internet content Information You can access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from APPS List. (Example) ●● To enable this function, you need a broadband network environment. Ensure the network connections and network settings are completed.
Selecting internet content 1. Display APPS List with APPS. ●● For details of APPS List my Home Screen > APPS List ●● Depending on the usage conditions, it may take a while to read all the data. 2. Select the desired item with / / / and press OK to access. (Example) ●● To return to APPS List APPS ●● To exit APPS List EXIT ●● You may operate the internet contents with the free cursor and Voice Control function of Touch Pad Controller (supplied).
Note ●● If you cannot access the internet contents, check the network connections and settings. Network > Network connections Network > Network settings ●● APPS List is subject to change without notice. ●● Not all the features of the websites are available. ●● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be able to use APPS List. You can update the software later manually.
DLNA Information This TV is a DLNA Certified™ product. DLNA® (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. ●● To enable this function, connect this TV to your home network.
●● To use a PC as a media server Prepare the PC with Windows 7 / Windows 8 or ensure the server software is installed on the PC. “Windows 7 / Windows 8” and “Twonky 7 (installed on the PC with Windows XP or Mac)” are the server software that has been tested for compatibility with this TV (as of December, 2013). Any other server software has not been tested with this TV, therefore compatibility and performance cannot be assured.
■■Playback of sharing contents on this TV with the DMC (Digital Media Controller) network equipment You can enjoy contents stored in the media server by controlling with the DMC network equipment (smartphone, PC with Windows 7 / Windows 8 installed, etc.) connected to your home network. ●● To use this function with your smartphone or Windows 7 / Windows 8, set TV Remote App Settings of this TV.
= Note = ●● To use this function, turn this TV on. ●● This function is available only with 1 piece of other equipment. ●● You may be able to control this TV using your smartphone. For details, refer to the support information of the application. ●● Display the TV full-screen for sharing the TV programme with another piece of network equipment.
Using DLNA To use DLNA® features, ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > Information Network > Network connections Network > Network settings 1. Display APPS List with APPS. 2. Select Media Server with / / / 3. Select one of the media servers with and press OK to access. / and press OK to access. ●● For the operations to access another TV, select the name of another TV from the displayed media server list.
Network connections Internet connection To use internet service, you need a broadband network environment. ●● If you do not have any broadband network services, please consult your retailer for assistance. ●● Dial-up internet connections cannot be used. ●● Required speed (effective): at least 1.5 Mbps for SD (Standard Definition) and 6 Mbps for HD (High Definition) picture quality, respectively. If the transfer speed is not enough, contents may not be played back properly.
DLNA connection To use DLNA features, you need a home network environment and you can operate the features without a broadband network environment. ●● To use internet service, you need a broadband network environment. Network > Network connections > Internet connection ■■Wireless connection (For DLNA and internet service) Built-in wireless LAN (Rear of the TV) Access point Hub or Router Internet environment Smartphone DLNA Certified media server (PC, etc.
■■Wired connection (For DLNA and internet service) ETHERNET terminal LAN cable (Shielded) ●● Use the Shielded Twist Pair (STP) LAN cable. Hub or Router Internet environment DLNA Certified media server (PC, etc.) ■■Wireless connection (For DLNA) TV ●● To use the TV as a wireless access point Network > Network settings > Custom - Wireless Access Point DLNA Certified media server (PC, etc.
Note ●● Ensure to use a LAN straight cable. ●● Set up and connect equipment required for the network environment. You cannot make such settings on this TV. Read the manual of the equipment. ●● If your modem has no broadband router functions, use a broadband router. ●● If your modem has broadband router functions but there are no vacant ports, use a hub. ●● Ensure that the broadband routers and hubs are compatible with 10BASE-T / 100BASE-TX.
Network settings Network Connection Ensure the connections are completed before starting network setup. Network > Network connections ■■Quick setup - Wireless 1. Display the menu with MENU. 2. Select Network > Network Connection with access. ●● / and press OK to access. When the LAN cable is connected, wired setup will be done automatically. 4. Select your desired access point with ●● and press OK to Confirm the encryption key, settings and position of your access point before starting setup.
7. Select Exit with ●● / and press OK to set. To set manually Network > Network settings > Custom - Wireless ■■Quick setup - Wired 1. Display the menu with MENU. 2. Select Network > Network Connection with access. 3. Select Quick setup with / / and press OK to and press OK to access. 4. Automatically setup is done and Network Status is displayed. Network > Network settings > Network Status 5. Select Exit with ●● / and press OK to set.
●● For WPS(PIN) 1) Press (green). 2) Enter the PIN code to the access point. 3) Connect the TV with the access point with OK. ●● For Manual 1) Press (yellow). 2) You can set up SSID, security type, encryption type, and encryption key manually. 3) Follow the on-screen instructions and set manually. – When you use 11n (5 GHz) for the wireless system between the built-in wireless LAN and access point, select AES for the encryption type.
Proxy Settings ●● It is not required for normal household use. ●● Some internet services may not be available depending on the proxy settings. Proxy: This is the address of the relay server which is connected between the browser and the target server to send data to the browser. 1) Select Proxy with / and press OK to access. 2) Enter the address with press OK to set. / / / or Numeric buttons, and 3) Press BACK/RETURN to store.
Custom - Wired Ensure the connections are completed before starting network setup. Network > Network connections 1. Display the menu with MENU. 2. Select Network > Network Connection > Custom > Wired with and press OK to access. / / / 3. IP/DNS Settings is displayed. Acquire IP Address / Acquire DNS Address ●● Auto is recommended. ●● Available settings are displayed automatically. ●● To set manually, select and set IP Address / Subnet Mask / Default Gateway / DNS Address.
4. Select Network Status with / and press OK to access. Network > Network settings > Network Status 5. Select Exit with / and press OK to set. = Note = ●● When the network connection type is set to Wired, Wireless is deactivated. Custom - Wireless Access Point You can use the TV as a wireless access point and connect the network equipment without an access point. ●● Confirm the PIN code, network settings of the equipment before starting setup. For details, read the manual of the equipment. 1.
■■Change settings You can set up Network name(SSID), Encryption key, Wireless type and Channel setting method manually. Follow the on-screen instructions and set manually. ●● Set Reset settings to reset the items of Change settings. = Note = ●● You cannot connect the internet service while the TV is set to Wireless Access Point. ●● You can connect up to 7 devices. But the transfer rate will vary according to communication environment or the numbers of connected equipment.
my Home Cloud Settings Displays the terms of service for the cloud services. 1. Display the menu with MENU. 2. Select Network > my Home Cloud Settings > Notices with press OK to access. / and 3. Follow the on-screen instructions. ●● To set up an account for the cloud services Functions > User profile > Settings VIERA Name Sets your favourite name for this TV. ●● This name will be used as the name of this TV on the screen of the other network equipment.
Powered On by Apps (On / Off) Enables to turn the TV on from the network equipment (smartphone, etc.). ●● Depending on the network condition, you may have to turn the TV on with Standby On / Off switch of the TV’s remote control. ●● Changing the default configuration may increase Standby Power Consumption. ●● LED will turn to orange in Standby mode if Powered On by Apps is set to On.
Network Link Settings Sets to control the TV with devices connected to the network. 1. Display the menu with MENU. 2. Select Network > Network Link Settings with access. 3. Select one of the following items with / / and press OK to and press OK to access. DLNA Server / Registration Type / Remote Device List 4. Set with / and press OK to store. DLNA Server (On / Off) Enables to share the TV programme and contents of this TV with the network equipment (DLNA Certified VIERA, etc.).
Remote Device List Lists the equipment accessible to this TV on the home network. = Note = ●● Depending on the area, this function may not be available. For details, consult your local Panasonic dealer. DVB-via-IP Server Settings Selects TV signal and enables to tune in DVB-via-IP server function. Functions > DVB-via-IP > DVB-via-IP Server Settings TV Anywhere Settings TV Anywhere (On / Off) Enables to watch TV and set timer programming events of this TV on the network equipment (smartphone, etc.
Software Update Accesses the specific website to update the TV’s software if any updates are available. 1. Display the menu with MENU. 2. Select Network > Software Update with / and press OK to access. 3. Follow the on-screen instructions. New Software Message Selects whether to give a notification message when new software is found via network or not. 1. Display the menu with MENU. 2. Select Network > New Software Message with access. 3. Select On / Off with / and press OK to set.
Photos Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > Information Network > Network connections Network > Network settings 1. Display APPS List with APPS. 2. Select Media Server with / / / 3. Select one of the media servers with and press OK to access. / and press OK to access. ●● For the operations to access another TV, select the name of another TV from the displayed media server list.
Viewing photo ■■Playback ●● To operate Single view : To the previous photo : To the next photo : Stop (return to list) OK : Slideshow ●● To display / hide the operation guide ●● To rotate 90° (blue) ●● To return to list BACK/RETURN Using Slideshow Slideshow ends when all photos within the list are viewed. 1. Select the file from the thumbnail of photos for the first view with 2. Start Slideshow with / . (red) and OK.
Transition Effect (Off / Fade / Dissolve / Motion / Random) Selects the transition effect for switching photos during the slideshow. Fade: The next photo fades in gradually. Dissolve: Each photo is dissolved when switching to the next photo. Motion: Each photo is displayed with an effect of enlarging, reducing, moving up or moving down. Random: The transition effect is selected at random. Auto Makeup (On / Off) Automatically detects the face in the photo and improves luminance and contrast.
Videos Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > Information Network > Network connections Network > Network settings 1. Display APPS List with APPS. 2. Select Media Server with / / / 3. Select one of the media servers with and press OK to access. / and press OK to access. ●● For the operations to access another TV, select the name of another TV from the displayed media server list.
Watching video ■■Playback If you have stopped the last playback halfway, the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning. ●● To operate playback : Manual skip (if available) – Press to skip forward approx. 30 seconds. : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar / slow playback) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK.
●● To change aspect 1) Display Aspect Selection with ASPECT. 2) Select the mode with / and press OK to set. Aspect1: Displays the content enlarged without distortion. Aspect2: Displays the content full-screen. Original: Displays the content original size. – You can also change the mode pressing ASPECT. (Press repeatedly until you reach the desired mode.) – Aspect cannot be changed depending on the content.
Subtitle Display / hide subtitles (if available). ●● This function is available during playback. Subtitle Text Selects the font type to display subtitles correctly (if available). ●● This function is available during playback. Subtitle Language Selects the language for subtitles (if available). ●● This function is available during playback.
Audio output settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●● To confirm or change the current sound status Network > Videos > Video Setup 1. Display the menu with MENU. 2. Select Sound > SPDIF Selection with 3. Select Auto / PCM with / / and press OK to access. and press OK to set.
Music Selecting file Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > Information Network > Network connections Network > Network settings 1. Display APPS List with APPS. 2. Select Media Server with / / / 3. Select one of the media servers with and press OK to access. / and press OK to access. ●● For the operations to access another TV, select the name of another TV from the displayed media server list.
Playing music ■■Playback ●● To operate playback : Rewind : Fast forward : Stop OK : Pause (displays the time seek bar) / Playback ●● To jump to the specified time point 1) Display the time seek bar with OK. 2) While the time seek bar is displayed Press / : Search approx. 10 seconds Press and hold / : Search rapidly 3) Jump to the specified time point with OK.
DIGA Recorder Controlling DIGA Recorder Ensure the preparations of the media server, network connections and network settings are completed. Network > DLNA > Information Network > Network connections Network > Network settings 1. Display APPS List with APPS. 2. Select Media Server with 3. Select DIGA with / / / / and press OK to access. and press OK to access. 4. The screen of the DIGA Recorder will be displayed.
Technical information Photo format ■■Supported Photo formats ●● JPEG (.jpg, .jpeg, .mpo) Sub-sampling: 4:4:4, 4:2:2, 4:2:0 Image resolution (pixel): 8 × 8 to 30 719 × 17 279 ●● DCF and EXIF standards ●● Progressive JPEG is not supported. = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names. ●● Connected devices may become unusable with this TV if the file or folder names are changed.
Video format ■■Supported Video formats ●● SD-Video (.mod) Video codec: MPEG1, MPEG2 Audio codec: Dolby Digital, MPEG Audio ●● SD-Video Standard Ver. 1.31 (Entertainment Video Profile) ●● The data may not be available if a folder structure on the device is modified. ●● AVCHD (.mts) Video codec: H.264 BP/MP/HP Audio codec: Dolby Digital ●● AVCHD Standard Ver. 2.0 (AVCHD 3D, AVCHD Progressive) ●● The data may not be available if a folder structure on the device is modified. ●● AVI (.
●● MP4 (.f4v, .m4v, .mp4) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MPEG Audio, MP3 ●● This TV supports this container recorded with Panasonic products. For details, read the manual of the products. ●● MKV (.mkv) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP Audio codec: AAC, Dolby Digital, Dolby Digital Plus, DTS core, HE-AAC, MPEG Audio, MP3, Vorbis ●● Some subtitles or chapter functions may not be available.
●● PS (.mod, .mpg, .mpeg, .vob, .vro) Video codec: MPEG1, MPEG2 Audio codec: Dolby Digital, LPCM, MPEG Audio ●● TS (.mts, .m2ts, .tp, .trp, .ts, .tts) Video codec: H.264 BP/MP/HP, MPEG1, MPEG2 Audio codec: AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, MPEG Audio ■■Supported Subtitles formats ●● MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●● The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.
Music format ■■Supported Music formats ●● MP3 (.mp3) ●● AAC / Apple Lossless (.m4a) ●● Copy-protected files cannot be played back. ●● FLAC (.flac) ●● WMA / WMA Pro (.wma) ●● Copy-protected files cannot be played back. ●● WMA Lossless is not supported. ●● LPCM (.wav) = Note = ●● Some files may not be played back even if they fulfil these conditions. ●● Do not use multi-byte characters or other special codes for file names.
Functions User profile Information Setting user profile allows you to enjoy the recommended contents, your favourite Home Screen, cloud services, etc. ●● To use my Stream Functions > User profile > my Stream = Note = ●● You need a broadband network environment to use this function fully. Settings You can create and edit a user profile. ■■To edit a user profile 1. Display the main menu with MENU. 2. Select Setup > User Settings with 3. Select a user with ●● / / and press OK to access.
Your face Registers the face data of the user for Face Recognition. Main Home Screen Selects Home Screen to be displayed when using Voice Control function. To use this function, you need to register your voice data or face data. my Home Cloud account Sets up an account for the cloud services. ■■To delete a user profile 1. Display the main menu with MENU. 2. Select Setup > User Settings with 3. Select a user with / / and press OK to access. and press OK to access. 4.
my Stream Automatically provides the recommended contents (TV programmes, internet content, etc.). 1. Display APPS List with APPS. 2. Select my Stream with / / / and press OK to access. 3. Follow the on-screen instructions. ●● To register a content as your favourite Functions > Touch Pad Controller > My button = Note = ●● You need a broadband network environment to use this function fully.
Voice Control Preparations Voice Control function allows you to operate the TV (e.g. selecting a channel), search the content from various features, etc. with your speech. ●● To use this function fully, you need a broadband network environment. Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● Ensure the pairing of Touch Pad Controller is completed. Functions > Touch Pad Controller > Settings ■■Voice Control Settings 1.
= Note = ●● To use Voice Control function fully, you need a broadband network environment, because this function accesses the speech recognition server with the internet connection. Even if you have the internet environment, this function may not be available depending on the proxy settings. Please connect the internet without proxy settings. (Proxy settings are not required for normal household use.
Touch Pad Controller Information Touch Pad Controller is designed for the convenient operations, especially, on Home Screen or internet contents. You can operate the TV intuitively with this controller. ●● Touch Pad Controller can be used by registering to this TV with Bluetooth wireless technology. ●● After registering, you can operate the TV without pointing this controller at the TV (except Standby On / Off switch).
Settings 1. Display the menu with MENU. 2. Select Setup > VIERA Touch Pad Controller with access. 3. Select one of the following items with / 4. Follow the on-screen instructions. Pairing Registers Touch Pad Controller (supplied) to this TV. Only 1 Touch Pad Controller can be registered. Cursor Settings Sets for the cursor of Touch Pad Controller. Operation Guide Displays the operation guide of Touch Pad Controller. - 188 - and press OK to and press OK to access.
DVB-via-IP DVB-via-IP server connection This TV can be DVB-via-IP server to provide the broadcast streaming to another TV supporting DVB-via-IP client function. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ■■Connection TV (Satellite dish / Terrestrial aerial / Cable) ETHERNET terminal LAN cable (Shielded) ●● Use the Shielded Twist Pair (STP) LAN cable. Hub or Router DVB-via-IP client (VIERA, etc.
= Note = ●● External equipment and cables shown are not supplied with this TV. ●● Check the terminal type and cable plugs are correct when connecting. ●● To use this function, set DVB-via-IP Server Settings. Network > Network settings > DVB-via-IP Server Settings ●● Dual tuner function (watching or recording 2 programmes simultaneously, watching a programme while recording another programme, etc.) is not available while using DVB-via-IP server function.
DVB-via-IP Server Settings ■■Preparations ●● Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-IP server connection Network > Network settings ●● Ensure that Dual Tuner Mode is set to On in LNB Configuration. Watching > Tuning and editing channels > Auto Setup ■■DVB-via-IP Server Settings Selects TV signal and enables to tune in DVB-via-IP server function. 1. Display the menu with MENU. 2. Select Network > DVB-via-IP Server Settings with access. 3.
DVB-via-IP client connection This TV has DVB-via-IP client function and can connect to DVB-via-IP server to watch the broadcast streaming. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●● It is recommended to connect DVB-via-IP server with the LAN cable. ■■Wired connection ETHERNET terminal LAN cable (Shielded) ●● Use the Shielded Twist Pair (STP) LAN cable.
= Note = ●● External equipment and cables shown are not supplied with this TV. ●● Check the terminal type and cable plugs are correct when connecting. ●● Depending on the network condition and broadcasts, this function may not be available. ●● To confirm the current network settings Network > Network settings > Network Status ●● For details of the connections, read the manual of the DVB-via-IP server. ●● Additional information for the servers may be found on the following website.
DVB-via-IP Server Selection ■■Preparations ●● Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-IP client connection Network > Network settings ●● Ensure the server settings are completed. For details, read the manual of DVB-via-IP server. ■■DVB-via-IP Server Selection 1. Display the menu with MENU. 2. Select Setup > Tuning Menu > Add TV Signal with access. 3. Select DVB-via-IP with / / and press OK to and press OK to access. 4.
= Note = ●● If tuning has not been done completely, set Manual Tuning. Watching > Tuning and editing channels > Manual Tuning ●● Depending on the network condition and broadcasts, this function may not be available. Note ●● Depending on the network condition and broadcasts, this function may not be available. ●● This function is not available when the TV is turned off with Mains Power On / Off switch. ●● Additional information for the services may be found on the following website.
Multi Window Information Displays two windows at once for viewing the TV programmes or external input (AV / COMPONENT / HDMI) as shown below (example). (green) Pre-view Dual view OK Pre-view ●● Pre-view To swap windows OK – Not valid while the recording is in progress ●● To exit multi window EXIT = Note = ●● Operations vary while using DVB-via-IP server function.
How to use You can select a channel while watching another programme or external input. 1. Display the menu with MENU. 2. Select Picture > Screen Settings > Multi Window with to access. / and press OK ■■Pre-view (Example) Main screen TV mode / Input mode / Channel position and name (for main screen) TV mode / Input mode (for sub screen) – You can select the TV mode / input mode of the sub screen with / .
■■Dual view (Example) Main screen TV mode / Input mode / Channel position and name Sub screen ●● Press – ●● / to select the screen to operate. displays on the screen. To select the sound 1) Display the option menu with OPTION. 2) Select Sound Output with 3) Select Main / Sub with – ●● / / and press OK to access. and press OK to set. displays on the screen. To confirm or change the current status OPTION – Menu items and selectable options vary between the main screen and sub screen.
= Note = ●● Operations vary while using DVB-via-IP server function as following. PandP: Press (yellow) to switch to Picture-and-Picture mode. PinP: Press (green) to switch to Picture-in-Picture mode. The main screen is displayed on full-screen and the sub screen is displayed at the right bottom of the main screen. – You can swap the main and sub screen with – Press (blue). to display / hide the operation guide. – The sound comes only from the main screen in multi window.
VIERA Link “HDAVI Control™” Summary of VIERA Link Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control™” function. VIERA Link (HDAVI Control) connects the TV and the equipment with VIERA Link function, and enables easy control, playback, energy saving, creating home theatre, etc. without complicated settings. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically.
■■VIERA Link (HDMI connection) ●● Use a fully wired HDMI compliant cable. ●● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment.
■■VIERA Link (HDMI and Audio out connections) ●● Use a fully wired HDMI compliant cable. ●● Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an HDMI cable. ●● Use a fully wired SCART cable. ●● Use the optical digital audio cable or SCART cable for audio output from the TV.
■■Available features (HDMI and Audio out connections) Player theatre ●● Easy playback ●● Power on Link ●● Power off Link ●● Intelligent Auto Standby ●● VIERA Link Control ●● Speaker Selection Blu-ray Disc theatre ●● Easy playback ●● Power on Link ●● Power off Link ●● Standby Power Save ●● Intelligent Auto Standby ●● VIERA Link Control ●● Speaker Selection Amplifier ●● Power off Link ●● Intelligent Auto Standby ●● Speaker Selection : For equipment which has “HDAVI Control 2 or
■■VIERA Link Control of compatible equipment The following is the maximum number of compatible equipment that can be controlled by VIERA Link Control. This includes connections to equipment already connected to the TV. For example, DIGA Recorder connected to Amplifier which is connected to the TV via an HDMI cable. Functions > VIERA Link “HDAVI Control™” > VIERA Link Control ●● Recorder: Maximum 3 (DIGA Recorder, etc.
Easy playback Automatic input switching - When the connected equipment is operating, the input mode is switched automatically. Power on Link Set Power on Link to On in VIERA Link Settings to use this function. When the connected equipment starts playback or direct navigator / function menu for the equipment is activated, the TV is automatically turned on. (Only when the TV is in Standby mode.) Power off Link Set Power off Link to On in VIERA Link Settings to use this function.
Intelligent Auto Standby Set Intelligent Auto Standby to On in VIERA Link Settings to use this function. When the TV is on, non-used connected equipment goes into Standby mode automatically to reduce the power consumption. For example, when the input mode is switched from HDMI or when Speaker Selection is changed to TV (except for watching a disc). ●● This function may not work properly depending on the connected equipment. In this case, set to Off.
■■If multiple recorders or players are connected Each recorder / player is numbered. The number is given from the TV’s lower number of HDMI terminal connected to the same type of equipment. For example, when two recorders are connected to HDMI2 and HDMI3, the recorder connected to HDMI2 is displayed as Recorder1, and the recorder connected to HDMI3 is displayed as Recorder2. ■■If you access non-VIERA Link equipment The type of the connected equipment is displayed.
Speaker Selection You can control the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. 1. Display APPS List with APPS. 2. Select VIERA Link with / / 3. Select Speaker Selection with 4. Select Home Cinema / TV with / / and press OK to access. and press OK to access. / and press OK to set. Home Cinema: The sound is delivered from theatre speakers. Player theatre, Bluray Disc theatre or Amplifier will be automatically turned on if it is in Standby mode.
Note ●● These functions may not work properly depending on the connected equipment. ●● Image or sound may not be delivered for the first few seconds when the input mode is switched. ●● “HDAVI Control 5” is the newest standard for HDAVI Control compatible equipment. This standard is compatible with conventional HDAVI equipment.
Child Lock Using Child Lock You can lock specific channels / AV input terminals to restrict access to them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. 1. Display the menu with MENU. 2. Select Setup > Child Lock with / and press OK to access. 3. Enter the PIN number (4 digits) with Numeric buttons. ●● Enter the PIN number twice at first setting. ●● Make a note of the PIN number in case you forget it.
PIN number You can change the PIN number. 1. Select Change PIN with / and press OK to access. 2. Enter a new PIN number twice with Numeric buttons. = Note = ●● Setting Shipping Condition erases the PIN number and all settings. Parental Rating To watch the DVB programme that has rating information on the selected age, enter the PIN number (depending on the broadcaster). 1. Select Parental Rating with / and press OK to access. 2. Select an age for the restriction of programmes with to set.
Data Service Application Using Data Service Application You can enjoy Hybrid Broadcast Broadband TV application that is one of the interactive data services for digital broadcasting. 1. Display TV Selection with TV. 2. Select the mode with / and press OK to set. DVB-S / DVB-C / DVB-T / DVB-via-IP 3. Display the menu with MENU. 4. Select Setup > Data Service Application > Service with OK to access. 5. Select Auto Start On with / / and press and press OK to set.
Note ●● To use Hybrid Broadcast Broadband TV application fully, you need a broadband network environment. Ensure the network connections and network settings are completed. Network > Network connections Network > Network settings ●● Not all the data services are available depending on the country, area and broadcaster. ●● Not valid in multi window mode ●● Depending on the connection environment, the internet connection may be slow or may not be successful.
Common Interface Caution If the encrypted message is displayed on the screen, the correct Common Interface (CI) Module and smart card that are required for this service are not inserted. ■■How to insert CI module and smart card ●● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ●● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module.
Using Common Interface The Common Interface Module menu provides access to software contained in Common Interface (CI) Modules. ●● This function may not be available in some countries or regions. ●● Not all the services are available in DVB-via-IP. ●● Video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted pay-TV channels).
Shipping Condition Shipping Condition Resets the TV to its original condition (i.e. no channels tuned in). All settings other than USB Device Setup are reset (channels, picture, sound settings, etc.). 1. Display the menu with MENU. 2. Select Setup > System Menu > Shipping Condition with OK to access. ●● / and press Child Lock PIN number is required depending on the country. If you have forgotten your changed PIN, input “6969” as the PIN number. Functions > Child Lock > PIN number 3.
Updating the TV Software Information A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available and the channel has the update information, a notification message is displayed. ●● To install new software, select Standby / Now with set. / and press OK to Standby: Installs new software in standby condition. Now: Installs new software now. Auto update You can update new software automatically. 1. Display the menu with MENU. 2.
= Note = ●● Download may take a few hours. ●● During software download and update, DO NOT switch off the TV. ●● A notification message may be a reminder. In this case, schedule information (the date when the new version can be used) will appear. You can set the reservation for update. The update will not start when the TV is off. Manual update You can update new software manually. 1. Display the menu with MENU. 2.
Setting characters Using Numeric buttons You can enter characters for free input items using Numeric buttons. Press Numeric buttons repeatedly until you reach the desired character. :.@/1!:#+-*_()“‘%&?,;=$[]~<>{}|`^\ :abc2ABC :def3DEF :ghi4GHI :jkl5JKL :mno6MNO :pqrs7PQRS :tuv8TUV :wxyz9WXYZ : Space 0 ●● The character is set automatically if you leave for 1 second. ●● You can also set the character pressing OK or other Numeric buttons less than 1 second.
Bluetooth devices Bluetooth Setup You can use Bluetooth keyboards / mouse / Bluetooth audio devices (headphones, etc.) with this TV by setting Bluetooth Setup in the Setup Menu. : HID (Human Interface Device Profile) compliant keyboards / mouse can be used. : A2DP (Advanced Audio Distribution Profile) compliant audio devices can be used. ●● Additional information for the devices may be found on the following website. http://panasonic.net/viera/support (English only) 1. Display the menu with MENU. 2.
●● To adjust the volume of this audio device, set Headphone Volume. Watching > For best audio > Volume settings ●● Settings in the Sound Menu may not be effective for the Bluetooth audio devices. ●● This setup has not been designed for Touch Pad Controller supporting Bluetooth wireless technology.
Keyboard Keyboard ●● Keyboards requiring the drivers are not supported. ●● To change the language type, set Keyboard Layout. 1) Display the menu with MENU. 2) Select Setup > System Menu > Keyboard Layout with OK to access. 3) Select the language with / / and press and press OK to set. ●● Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboard layout setting.
Settings Setting menu How to use Various menus allow you to make settings for the picture, sound, and other functions. 1. Display the menu with MENU. ●● Displayed items vary depending on the input signal. 2. Select the menu with / and press OK to access. 3. Select the items with / and press OK to access. ●● Only available items can be selected. ●● You can also access from eHELP pressing available).
●● To change menu pages ●● To change the colour type of on-screen displays, set OSD Colour. my Home Screen > my Home Screen > OSD Colour = Note = ●● Menu items and selectable options vary depending on the mode (TV mode, Media Player, Network services, etc.). ■■Using control panel buttons 1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to display the menu. 2. Select and set with following control panel buttons.
Picture Viewing Mode Selects your favourite picture mode for each input. (Dynamic / Normal / Cinema / True Cinema / Custom) Watching > For best picture > Viewing Mode Basic settings Backlight, Contrast, Brightness, Colour, Tint, Sharpness Adjusts the levels of these options according to your personal preference. Watching > For best picture > Basic settings Colour Temperature Sets the overall colour tone of the picture (bluer - redder).
24p Smooth Film (Max / Mid / Min / Off) Automatically compensates the picture frame rate to make the 24p source movie images smooth. Watching > For best picture > Basic settings ●● This function is available only for 24p signal input and displayed instead of Intelligent Frame Creation.
Option Settings Game Mode (On / Off) Provides suitable images for fast response signals when playing games. Watching > For best picture > Option Settings ●● Not valid in TV mode Film Cadence Mode (On / Off) Improves vertical resolution for movie images. Watching > For best picture > Option Settings ●● This function is available for interlaced signals (except in the mode of multi window, Network services or when Game Mode is set to On).
AV Colour System (Auto / PAL / SECAM / M.NTSC / NTSC) Selects optional colour system based on video signals. Watching > For best picture > Option Settings ●● For AV input 3D-COMB (On / Off) Makes still or slow moving pictures more vivid. Watching > For best picture > Option Settings ●● For PAL / NTSC signal reception in TV mode or from composite connection Screen Settings 16:9 Overscan (On / Off) Selects the screen area displaying the image for 16:9 aspect.
Multi Window Displays two windows at once. Functions > Multi Window > How to use Screen Display (On / Off) Turns the screen off when you select Off. Watching > For best picture > Screen Settings 3D Settings 3D Detection (On (Advance) / On / Off) Selects whether to switch to the 3D mode automatically or not. Watching > 3D > 3D Settings 3D Signal Message (On / Off) Selects whether to give a notification message when a signal of 3D format is found or not.
L/R Picture Swap (L/R (Normal) / R/L (Reversed)) Swaps pictures for left eye and right eye (except in 2D→3D mode). Watching > 3D > 3D Settings Edge Smoother (On / Off) Set to On if you feel the contoured parts of an image are not smooth enough (except in 2D→3D mode). Watching > 3D > 3D Settings Safety Precautions Displays the precautions for viewing 3D images. Watching > 3D > 3D Settings Copy Adjustment Copies the picture settings of True Cinema or Custom to those of the other input mode or Viewing Mode.
Sound Mode Selects your favourite sound mode for each input. (Standard / Music / Ambience / User) Watching > For best audio > Sound mode Basic settings Bass Adjusts level to enhance or minimise lower, deeper sound output. Watching > For best audio > Basic settings Treble Adjusts level to enhance or minimise sharper, higher sound output. Watching > For best audio > Basic settings Equaliser Adjusts the frequency level to suit your favourite sound quality.
Volume settings Speaker Setting (TV Speaker / Headphones / Off) Selects the sound output to adjust volume. Set to Off when using the external speakers. Watching > For best audio > Volume settings Headphone Volume Adjusts the volume of headphones. Watching > For best audio > Volume settings Auto Gain Control (On / Off) Automatically regulates large sound level differences between channels and inputs.
Voice Guidance Settings Voice Guidance (On / Off) Set to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users. Watching > For best audio > Voice Guidance Settings Speed (Fast / Normal / Slow) Selects the readout speed for the voice guidance. Watching > For best audio > Voice Guidance Settings Volume (Max / Mid / Min) Selects the volume for the voice guidance.
Audio Description Preferred Audio Type (Standard / Audio Description) Narration settings for visually impaired users Watching > For best audio > Audio Description ●● For DVB ●● Not valid on the sub screen in multi window mode Volume Adjusts the volume for Audio Description. Watching > For best audio > Audio Description ●● For DVB Speakers (Mix / Standard) Set to Mix to activate the description sound track from TV speakers.
Advanced settings MPX Selects multiplex sound mode (if available). Watching > For best audio > Advanced settings ●● For Analogue Audio Preference (Auto / Multichannel / Stereo / MPEG) Selects the initial setting for audio tracks. Watching > For best audio > Advanced settings ●● For DVB SPDIF Selection (Auto / PCM) Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals.
Network Network Connection Sets the network setting to use this TV in your network environment. Network > Network settings > Network Connection Network Status Displays and checks the network status (MAC Address, current network settings, etc.). Network > Network settings > Network Status my Home Cloud Settings Notices Displays the terms of service. Network > Network settings > my Home Cloud Settings VIERA Name Sets your favourite name for this TV.
File Sharing Settings Network Device List Lists the accessible network devices to play back the contents in Media Player. Media Player > Using Media Player > Network device Other settings Software Update Checks for available software updates from the Panasonic website. Network > Network settings > Software Update New Software Message (On / Off) Selects whether to give a notification message when new software is found via network or not.
Timer Off Timer Sets the duration of time until the TV automatically goes into Standby mode. (90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)) Watching > Basic > Off Timer Timer Programming Sets a timer to record or remind forthcoming programmes. Recording > Timer Programming > Setting Timer Programming ●● For DVB Time Zone Adjusts the time data. Watching > Basic > Adjusting time Auto Standby Automatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours.
Setup Eco Navigation Automatically sets the TV to the most suitable energy-saving mode. Watching > Basic > Energy saving functions Voice Control Settings Settings for Voice Control function Functions > Voice Control > Preparations User Settings Settings for user profile. Functions > User profile > Settings USB Device Setup Formats the USB HDD or safely removes USB device.
Bluetooth Setup Settings for the specific devices supporting Bluetooth wireless technology Functions > Bluetooth devices > Bluetooth Setup Child Lock Applies access control for channels or inputs to prevent unwanted access. Functions > Child Lock > Using Child Lock Tuning Menu Favourites Edit Creates a list of favourite channels. Watching > Tuning and editing channels > Favourites Edit ●● Not valid in Analogue Channel List Skips unwanted channels or edits channels.
New Channel Message (On / Off) Selects whether to give a notification message when a new channel is found or not. Watching > Tuning and editing channels > New Channel Message ●● For DVB Service Replacement (On / Off) Set to On to display a message to switch to the available service (only available in some countries). Watching > Tuning and editing channels > Other settings ●● For DVB-C Signal Condition Checks the signal condition.
Add TV Signal Adds the TV mode. Watching > Tuning and editing channels > Other settings = Note = ●● The settings in Tuning Menu are applicable only for the selected TV mode. The menu name varies depending on the TV mode. (DVB-S Tuning Menu / DVB-C Tuning Menu / DVB-T Tuning Menu / DVB-via-IP Tuning Menu / Analogue Tuning Menu) Language OSD Language Changes language for on-screen displays.
Display Settings OSD Colour (Jet black / Pale grey / Organic brown / Sand beige) Selects the preferred colour type of on-screen displays. my Home Screen > my Home Screen > OSD Colour Preferred Subtitle Type (Standard / Hard of Hearing) Selects the preferred subtitle type. Watching > Basic > Subtitle Teletext (TOP (FLOF) / List) Selects teletext display mode. Watching > Teletext > Teletext mode Teletext Character Set (West / East1 / East2) Selects teletext language font.
Banner Display Timeout (10 / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2 / 1 / 0 (No display) (seconds)) Sets how long the information banner stays on screen. Watching > Basic > Information banner Smart Banner (On / Off) Displays the introduction banner for the internet service. Watching > Basic > Information banner Playing Time Display (On / Off) Set to On to display a time period of continuous use in Game mode on the top right of the screen every 30 minutes.
Common Interface Sets to watch encrypted channels, etc. Functions > Common Interface > Using Common Interface VIERA Link Settings VIERA Link (On / Off) Sets to use VIERA Link functions. Functions > VIERA Link “HDAVI Control™” > Preparations Power on Link (On / Off) Sets to use Power on Link functions. Functions > VIERA Link “HDAVI Control™” > Power on Link Power off Link (On / Off) Sets to use Power off Link functions.
Data Service Application Service (Auto Start On / Auto Start Off / Off) Sets to use Hybrid Broadcast Broadband TV application. ●● Not all the data services are available depending on the country, area and broadcaster. Functions > Data Service Application > Using Data Service Application ●● For DVB Store Cookie (On / Off) Sets to store the information from a data service to the TV in order to access again quickly.
Other Settings GUIDE Plus+ Settings Settings for the GUIDE Plus+ system Watching > TV Guide > Using TV Guide Power Save (On / Off) Reduces brightness of the picture to economise on power consumption. Exchange Channel List Exports / Imports DVB-S Channel List settings using the USB device to share the same settings with VIERA which has the same function.
Support FAQs Picture Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Auto aspect ●● Auto aspect is designed to provide you with the best ratio to fill the screen. Watching > For best picture > Aspect Control Signal ●● Press ASPECT if you want to change the aspect ratio manually.
No image can be displayed ●● Check the correct input mode is selected. ●● Check the setting of AV2 (COMPONENT / VIDEO) in Input Selection to match the output of the external equipment. Watching > External equipment ●● Is Contrast, Brightness or Colour in the Picture Menu set to the minimum? Watching > For best picture > Basic settings ●● Check all required cables and connections are firmly in place. Blurry or distorted image (no sound or low volume) ●● Reset channels.
Digital TV Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs / Some channels cannot be tuned ●● Check the position, direction and connection of the aerial or dish. ●● Check Signal Condition. If the level of Signal Quality is low, the DVB signal is weak.
Faulty dish message appears ●● The satellite cable may be short-circuited or there may be connection problems of the cable. Check the cable and connection and then turn the TV off with Mains Power On / Off switch, and turn it on again. ●● If the message persists, consult a dish installer for checking the dish and cable. No programmes shown on TV Guide ●● Check the digital transmitter. ●● Adjust the direction of the aerial or dish to another transmitter installed nearby.
Sound Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. No sound is produced ●● Is “Sound mute” active? Press MUTE to switch sound mute on or off. ●● Is the volume set to the minimum? ●● Check connections and setting of external equipment. Watching > External equipment ●● Ensure that Speaker Selection is set to TV.
3D Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Cannot view 3D images ●● Ensure that 3D Mode Selection is set to 3D. Watching > 3D > 3D Mode Selection ●● Some 3D image signals may not be automatically recognised as 3D images. Set 3D Mode Selection (Manual) to match the picture format.
HDMI Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Sound is unusual ●● Set the sound setting of the connected equipment to “2ch L.PCM”. ●● Check the HDMI Input setting in the Sound Menu. Watching > For best audio > Advanced settings ●● If digital sound connection has a problem, select analogue sound connection.
Network Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Cannot connect to the network ●● Check the LAN cable or wireless LAN is connected properly. Network > Network connections ●● Check the connections and settings. Network > Network connections Network > Network settings ●● Check the network equipment and network environment.
Cannot operate internet content ●● Check the connections and settings. Network > Network connections > Internet connection Network > Network settings ●● The server or connected line may be busy now. Other Before requesting service or assistance, please follow these simple guides to solve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. VIERA Link function does not work and an error message appears ●● Check the connections.
Touch Pad Controller does not work or cannot be registered ●● Are the batteries installed correctly? ●● The batteries may be running low. Replace them with new ones. ●● Register again. Functions > Touch Pad Controller > Settings ●● Use Touch Pad Controller within approx. 3.2 m from the TV. (The range may be shortened depending on the obstacles between the TV and the controller, or the surrounding environment.
Maintenance Care and Cleaning First, remove the mains plug from the socket outlet. ■■Display panel, Cabinet, Pedestal Regular care: Gently wipe the surfaces of the display panel, cabinet, or pedestal using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: (1) First clean the dust on the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring the cloth firmly. (Please note liquids do not enter the TV inside.
Information Using Help menu 1. Display the menu with MENU. 2. Select Help with / and press OK to access. 3. Select TV Self Test / System Information / Device Information with and press OK to access. TV Self Test Makes a diagnosis of picture or sound problems. Follow the on-screen instructions. System Information Displays the system information of this TV. Device Information Displays the device information of this TV.
Optional accessories 3D Eyewear ■■3D Eyewear ●● TY-EP3D20E (1 pack includes 2 pairs of eyewear) – If you need 3D Eyewear additionally, please purchase this optional accessory. – Use Panasonic 3D Eyewear for passive 3D. ●● For more information: http://panasonic.net/viera/support (English only) Communication Camera ■■Communication Camera ●● TY-CC20W – This camera can be used for video communication and face recognition.
Wall-hanging bracket ■■Wall-hanging bracket ●● Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. = Warning = ●● Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.
Licence Licence Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. DVB and the DVB logos are trademarks of the DVB Project. DiSEqC™ is a trademark of EUTELSAT. “RealD 3D” is a trademark of RealD. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Speech Powered by Dragon 2002-2014 Nuance Communications, Inc. All rights reserved.
© 2013 CSR plc and its group companies. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version 2.1 (LGPL V2.
Ver.2.
