Model No. English TX-40EX700B TX-50EX700B TX-58EX700B TX-65EX700B Operating Instructions LED TV 40-inch model 50-inch model 58-inch model 65-inch model For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 22) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference.
● For information about the trademarks, refer to [eHELP] (Search by Purpose > Read first > Before use > Licence). The illustration for TX-58EX700B is used in this manual unless otherwise mentioned. Illustrations shown may be different depending on the model.
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2016) of digital services. ● Not all the features are available depending on the country, area, broadcaster, service provider and network environment. ● Compatibility with future services is not guaranteed.
● Insert the mains plug fully into the mains socket. ● To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times. ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands. ● Do not damage the mains lead. • Do not place a heavy object on the lead. • Do not place the lead near a high temperature object. • Do not pull on the lead.
■ Pedestal Warning ● Do not disassemble or modify the pedestal. Caution ● Do not use any pedestal other than the one provided with this TV. ● Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. ● During setup, make sure that all screws are securely tightened. ● Ensure that the TV does not suffer any impact during installation of the pedestal. ● Ensure that children do not climb onto the pedestal.
■ Excessive volume Accessories Caution ● Do not expose your ears to excessive volume from the headphones. Irreversible damage can be caused. ● If you hear a drumming noise in your ears, turn down the volume or temporarily stop using the headphones. ■ Battery for the Remote Control Standard accessories Remote Control (p. 19) ● N2QAYB001115 Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type.
Assembling / Removing the pedestal Assembly screw (4) M5 × 14 Assembly screw (4) M4 × 12 Assembling the pedestal 40-inch model ● Select a method to assemble the pedestal from the following 2 styles. 50-inch model 58-inch model 65-inch model ● Select a method to assemble the pedestal from the following 4 styles. ● Do not assemble the pedestal by any method other than those specified below.
40-inch model 2 ■ 1 A A C D E F 4 8 English B 3 G
40-inch model 2 ■ A 1 A C D F E B 3 4 G English 9
50-inch model 58-inch model 65-inch model ■ A 1 A C E 2 10 English D F B 3 4 G
50-inch model 58-inch model 65-inch model 3 ■ 1 A 4 B G A C D E F 2 English 11
50-inch model 58-inch model 65-inch model 1 A A C D E F 2 12 English B 3 ■ 4 G
50-inch model 58-inch model 65-inch model ■ A 1 A C E 2 D F B 3 G 4 Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Put the TV onto a work table with the screen panel down on the clean and soft cloth. 2 Pull out the cover. 3 Remove the assembly screws from the TV.
4 Pull out the pedestal from the TV. 5 Remove the assembly screws from the bracket. Connections ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. ● Keep the TV away from electronic equipment (video equipment, etc.
■ Aerial Terminals TV 1 2 3 4 RF cable Terrestrial aerial ● For DVB, Analogue AV devices 5 ■ DVD Recorder / Blu-ray Recorder, etc. TV 6 7 8 9 10 1 Model name plate 2 CI slot (p. 17) 3 Headphone jack 4 HDMI1 - 3 (p. 17) (p. 15, 16, 17) 5 USB 1 port 6 Terrestrial terminal (p. 15) 7 AV (COMPONENT / VIDEO) 8 ETHERNET terminal (p. 16) (p. 16) HDMI cable RF cable DVD Recorder / Blu-ray Recorder, etc. 9 DIGITAL AUDIO 10 USB 2 - 3 port ● To watch content in 4K format, use HDMI terminal. (p.
■ [HDMI Auto Setting] (Setup Menu) Network A broadband network environment is required to be able to use internet services. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first using the TV. (p.
■ Amplifier (listening with external speakers) TV ● Use HDMI2 to connect the TV to an amplifier which has ARC (Audio Return Channel) function. If connecting to an amplifier without ARC function, use DIGITAL AUDIO. ● To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For information about the connections, read the manuals of the equipment and amplifier. TV CI module ■ USB HDD (for recording) ● Use USB 1 port for connecting the USB HDD.
Cable arrangement Fix the cables using the cable tie, and then attach the cable cover / terminal cover to the TV. ■ Fixing the cables using the cable tie 40-inch model 50-inch model 58-inch model 65-inch model Attach the cable tie Insert the cable tie in a hole Hole Bundle the cables Set the tip in the hooks Hooks To loosen: Keep pushing the knob Knob To remove from the TV: Snaps Keep pushing both side snaps 18 English ● Fix cables as necessary.
Identifying Controls 7 OK ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. Remote Control 8 [Option Menu] ● Easy optional setting for viewing, sound, etc. 9 Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. 10 Volume Up / Down 11 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on.
■ Installing / Removing batteries Pull open Hook Indicator / Control panel ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight which button has been pressed. 4 5 Close 6 Note the correct polarity (+ or -) 7 1 2 3 Rear side of the TV 1 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control.
First time Auto Setup If tuning has failed check the RF cable, and the network connection, and then follow the on-screen instructions. When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 14 - 18) and settings (if necessary) of the connected equipment before starting Auto Setup.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) or (Remote Control) ● Mains power On / Off switch should be on. (p. 20) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
● To scroll the description (if more than 1 page) While the description is highlighted ● To open the reference screen ( ) ● To display the menu related to the description (only for some descriptions) (red) ● To check the features of this TV Search by Purpose > Read first > Features English 23
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3) The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p.
Maintenance Specifications First, remove the mains plug from the mains socket. ■ TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Connection terminals AV input (COMPONENT / VIDEO) VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 ) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] Y 1.0 V[p-p] (including synchronisation) PB/CB, PR/CR PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder M.NTSC Playback from M.NTSC Video recorders (VCR) NTSC (AV input only) Playback from NTSC Video recorders (VCR) Aerial input ±0.
■ When using the wall-hanging bracket Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
