OPERATING INSTRUCTIONS TX-48CX400B COLOUR TELEVISION WITH REMOTE CONTROL
Contents Safety Information...................................................2 Markings on the Product.........................................2 Maintenance............................................................3 Display panel, Cabinet, Pedestal............................3 Mains plug...............................................................3 Assembling / Removing the pedestal......................4 When using the wall-hanging bracket.....................4 Environmental Information...............
Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Don’t operate your TV in extreme ambient conditions as this may cause damage to your TV. In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains.
WARNING Do not ingest the battery, Chemical Burn Hazard (The accessories supplied with or) This product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Assembling / Removing the pedestal When using the wall-hanging bracket Preparations Take out the pedestal(s) and the TV from the packing case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.) • Use a flat and firm table bigger than the TV. Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. Holes for wall-hanging bracket installation; Rear of the TV • Do not hold the screen panel part.
Environmental Information Features This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. If you like to set the Backlight to a fixed value set as Custom and adjust the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote. Set as Off to turn this setting off.
Standby Notifications Inserting the Batteries into the Remote If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 5 minutes, it will go into standby. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because there was no signal for a long time.” Press OK to continue. Remove the back cover to reveal the battery compartment. Insert two size AAA batteries.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. Sales and Support Information Customer Communication Centre • For customers within the UK: 0344 844 3899 • For customers within Ireland: 01289 8333 • Monday - Friday 9:00am - 5:00pm, (Excluding public holidays).
Notice for DVB / Data broadcasting / IPTV functions Specification • This TV is designed to meet the standards (as of August, 2013) of DVB-T / T2 (MPEG2 and MPEG4AVC(H.264)) digital terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services. TV Broadcasting PAL BG/I/DK/LL’ SECAM BG/DK Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Digital Reception Fully integrated digital terrestrial-cable TV (DVB-T-C) (DVB-T2 compliant) Number of Preset Channels 1.
Remote Control TV 1. Standby: Switches On / Off the TV 2. Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. 3. TV: Displays channel list / Switches to TV Source 4. Mute: Completely turns off the volume of the TV 5. Volume +/- 6. Menu: Displays TV menu 7. Directional buttons: Helps navigate menus, content etc. and displays the subpages in TXT mode when pressed Right or Left 8.
Connections Connector Type Cables Mini Scart Connection (bottom) Device Mini Scart adapter cable (supplied) VGA Connection (bottom) AUDIO IN PC/YPbPr Audio Connection (back) YPbPr/PC Audio Cable (not supplied) HDMI Connection (bottom&side) SPDIF SIDE AV HEADPHONE SPDIF (Optical Out) Connection (back) Side AV (Audio/Video) Connection (side) Side Audio/Video Connection Cable (supplied) Audio/Video Cable (not supplied) Headphone Connection (side) YPBPR YPbPr Video Connection (back) YPbPr Conne
channels of it will be listed on the top of the Channel List. When finished, press OK to continue. Switching On/Off To Switch the TV On Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). To switch on the TV from standby mode either: • Press the Standby button, Programme +/- or a numeric button on the remote control. • Press the Standby button or Programme +/- on the TV. The TV will then switch on.
It is recommended to use the TV’s USB input(s) directly, if you are going to connect a USB hard disk. Note: When viewing image files the Media Player menu can only display 1000 image files stored on the connected USB device. Media Browser Menu You can play photo, music and movie files stored on a USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the side of the TV.
TV Menu Contents Picture Menu Contents 3D Settings Press to view 3D settings. Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colours.
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Headphone Sets headphone volume. Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing. Sound Mode You can select a sound mode (If the viewed channel supports).
Setup Menu Contents Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Parental Enter correct password to change parental settings. You can easily adjust Menu Lock, Maturity Lock(may not be available depending on the country selection in the First Time Installation) and Child Lock in this menu. You can also set a new PIN or change the default CICAM PIN using the related options.
Power Up Mode This setting configures the power up mode preference. Last State and Standby options are available. Virtual Remote Enable or disable the virtual remote feature. CEC With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature. CEC Auto Power On This function allows the connected HDMI-CEC compatible device to turn on the TV and switch to its input source automatically.
Set PIN: Defines a new PIN number. General TV Operation Using the Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Press the OK/TV button to open the Channel List. You can filter the listed channels by pressing the Blue button or open the Edit Channel List menu by pressing the Green button in order to make advanced changes in the current list.
Event Details (Info button): Displays detailed information about selected programmes. Filter (Text button): Views filtering options. Next Time Slice (Green button): Displays the programmes of next time slice. Options (OK button): Displays event options. Now/Next Schedule Navigate (Directional buttons): Press the Directional buttons to navigate through the channels and programmes. Options (OK button): Displays event options.
• Sound may be coming from only one speaker. Check the balance settings from Sound menu. Remote control - no operation • The batteries may be exhausted. Replace the batteries. Input sources - can not be selected • If you cannot select an input source, it is possible that no device is connected. If not; • Check the AV cables and connections if you are trying to switch to the input source dedicated to the connected device.
Supported File Formats for USB Mode Media Video Audio File Extension Video Codec Audio .mpg, .mpeg MPEG1-2-4, VC1 .dat MPEG1-2 .vob MPEG1-2 .mkv MPEG1-2-4, Xvid, H263, H264, WMV3, VC 1, Motion Jpeg, VP 8, HEVC, VP9 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, WMA, WMA 10 PRO M0, WMA 10 PRO M1, WMA 10 PRO M2, VORBIS, LPCM, IMA-ADPCM, MS-ADPCM, G711 A/mu-law, FLAC .mp4, .mov MPEG1-2-4, Xvid, H263, H264, Motion Jpeg, HEVC MPEG1/2 Layer 3, AAC/HEAAC, AC3/EAC3, VORBIS, LPCM/ ADPCM, G711 A/mu-law .
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information.
3D Mode To view 3D contents or programmes in 3D mode you should wear the active 3D shutter glasses that supports Bluetooth™ wireless technology. Note that this TV’s 3D feature works only with its specific 3D glasses. Use Panasonic active 3D Glasses for the best 3D experience. Cautions for 3D viewing For your safety; Read these safety precautions carefully before using the 3D function.
The 3D glasses may not operate correctly out of the viewing range. Use the 3D glasses within the viewing range. The range may be shortened depending on the obstacles between the TV and the 3D glasses, or the surrounding environment. Cleaning and maintenance of the 3D glasses • Do not apply spray cleaners directly onto the surface of the 3D glasses.This may result in discoloration and cracks and may cause the screen display to peel off.
Vertical Viewing Angle It is strongly recommended that the eye level of the viewer should be same height as the center of the TV. In case that is not possible, tilt the TV accordingly in its stand or wall mount. The picture may not be visible or may look dark if you do not stay within the viewing angle. Connectivity Wired Connectivity To Connect to a Wired Network • You must have a modem/router connected to an active broadband connection.
Configuring Wired Device Settings • Use a LAN connection for quicker file sharing between other devices like computers. Network Type The Network Type can be selected as Wired Device, Wireless Device or Disabled, in accordance with the active connection to the TV set. Select this as Wired Device if you are connecting via an ethernet. Internet Speed Test Highlight Internet Speed Test and press the OK button. TV will check the internet connection bandwidth and display the result when complete.
Connecting to your mobile device via WiFi • If your mobile device has WiFi feature, you can connect it to your TV via a router, in order to access the content in your device. For this, your mobile device must have an appropriate sharing software. • Connect to your router following the steps stated above in the Wireless Connectivity section. • Afterwards, engage your mobile device with the router and then activate the sharing software on your mobile device.
Audio Video Sharing Nero MediaHome Installation Audio Video Sharing support is only available in the Media Player Folder mode. To enable folder mode, go to the Setup tab in the main media browser screen and press OK. Highlight View Style and set to Folder using the Left or Right buttons. Select the desired media type and press OK. If sharing configurations are set properly, Device Selection screen will be displayed after selecting the desired media type.
Internet Portal Internet Browser HINT: A broadband internet connection is required for high quality viewing. You must set the country option accordingly in the First Time Installation for proper operation of the internet portal. Ensure that the TV is connected to a Wired/Wireless(if available) network with internet connection. After the connection is established, you can view portal options. Press Internet button on your remote control to open internet portal page.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
Product fiche Supplier Panasonic Corporation Model ID TX-48CX400B A Energy efficiency class 121 cm / 48 inches Visible screen size (diagonal) On mode average power consumption 87 W Annual energy consumption *1 127 kWh Standby power consumption *2 0,50 W Off mode power consumption NA 3840 x 2160 Screen resolution *1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days.
TQB0E2387 TQB0E2387 TQB0E2387 TQB0E2387 television is used. XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how Energy consumption K *1:the the rated consumption, refer and to the on the back cover. M the television isof used.
Consumo Consumo de de energia de energia energia de de XYZ de XYZ XYZ kWh kWh porpor por ano, ano, baseado baseado no no consumo, no consumo, consumo, emem em termos termos de de potência, de potência, potência, do do do televisor televisor a funcionar funcionar kWh ano, baseado termos televisor aa funcionar K K K Consumo 4 horas horas porpor por diadia dia durante durante 365365 365 dias. dias.
