I _ I Panasonic Operating Instructions LCD TV M odel No. TX-32LX80A VIVA vWlIrA aR H E3m1P leaseread these instructionsbefore operating your set and retain them for future reference. The images shown In this manual are for illustrativepurposes only. GD TQB4G00061 T X-32LXSIL0061EN.
Dear Panasonic Customer Welcome to the Panasonic family of customers.We hope that you will have many years of enjoyment from y our new LCD TV Warnings and Cautions ............................................2External Equipment ........................................ 18 23 Accessories/ Options ............................................... 3 Aspect Ratio...........................................................24 IdentifyingControls ...................................................
_ Standardaccessories Remote Control Transmitter 0 N2QAYBOO0227 Batteriesfor the Remote Control Transmitter (2) 0 R6 (AA) Operating Instructions Installing remote control batteries 1$ Pull Open Icautionj " Incorrect installation may cause battery leakageand corrosion,resulting in damage to the remote control unit. " Do not mix old and new batteries. " Do not mix different batterytypes. " Do not use rechargable (NI-Cd) batteries. " Do not bum or breakup batteries.
Store setting FuncUon select * Volume / Contrast / Brightness / Colour/ Sharpness / NTSC-IInt (Tint) / Balance / Tuning mode Select programmenumber in sequence / When a function is displayed, pressto increase or descrease the selected function When in Standby mode, switches IV on Change input mode Mains power On/Offswitch Powerindicator Standby'. RED Remotecontrol signal receiver (Range: 7 metres) Power ON: GREEN C.A.T.S.
External equipments and cables shown are not supplied with this TV. Please ensurethat unit is disconnectedfrom the mains socketbefore attaching or disconnecting any leads. C onnecting aerial C onnecting DVD RecorderI VCR 0 M ains plug types vary between countries. The powerplug shown abovemay, therefore,not be the type fittedto your set. (Connect afterall other connectlons.) 75 Q Coaxial cable Fie-] 1-X--1 If the antenna is placed in the wrong location, interferencemight happen.
These steps are not necessary if the setup has been completed by your local dealer. Turn On the TV with the mains power On I Off switch " You can now use the remote controlto turn On the unit or turn the unit to standby mode. " If you turned the"TVOff during Standby mode last time, the TV will be in Standby mode when you turn the TV On with mains powerOn / Off switch. Selectthe picture setting " `Homed is the recommeded mode for viewing at home. Select uHome" for optimal picture/ power consumption.
0 Displaythe menu access Selectand access "Setup menu" Selectand access menu" Select "Tuningthe item (Sys select I Auto tuning) select a ccess AN21AMselect ONSM s elect 0 To return to the previous screen MENU * REMBN or 0 0 9 Sys select (System selection) Select the system of your area. (China I HKIUK I Asia/M.EastI NVINDONES/ Australia I E.Europe I SPECL Ver I AmericaI CATV / Japan) *Auto tuning Automatically set the channels received in your area.
. Turn power on _ Mains powerONOffswitch shouldbe On. _ If "Shop" is displayed on the top right of the screen, select "Home" in "Vewing Environment'. (p. 6) Selecta programme numher 0 ©© y up down or 0 0 0 D D D _ To select a 2 or 3 _igit programmenumber, eg. 39 _ © T _ ( n a short time) " Other Useful Functions (Operateafter © ) I_ietu're Freeze I unfreeze picture " Press the HOLD button to freeze the picture. (TVNIDEO input only. ComponentI HDMI 1 PC HOLD input does not freeze.
Once the equipment is connected,use the following procedureto view the input. (For connection, see nExtemal Equipmerffon page 22) 4) Display the Input select menu Selectthe input mods conriected to the equipment G0View Bm To return to TV * = Displays the selected mode Note 0 If the external equipment has an aspectadjustment functionfor a connected TV set t o '16:9* a You can also select the connectorusing the AV button on the remote control or side panel of the TV.
" In FASTEXTmode, four differently coloured subjects are situated at the bottom of the display.To access more infbrmafion about one of these subjects, press the correspondingcoloured button.This facility enablesfast access to Information on the subjects shown. " In List mode, four differently coloured page numbersare situated at the bottom of the screen. Each of these numbers can be altered and stored in the TVs memory.
Return to the main index page INIM HIM 0 FASTEXTmode only In FIR " Call up the page stored in ffibluen. " Factory setting is "P 103". Watch TV and Teletext in two windows at once TIM = Press twice Select Picture and text On or Off 0 Operationscan be rnade only in Teletextscreen.
Various menus allow you to make settingsfbr the picture, sound,and other functions so that you can enjoy watching. TV in your own way.
___ 1_'_i_° _ ,P,cc?ss '_JIERALinkmenu F I .i rtie rr_r_u s CS',Ei?t1 r`3Bi J __ S etup _aunu , P ausa live T'v' feCl i _/ (EMC Vl_t_,_ Lrnk Control [} Stag; R f_rOrder h ome Ci_e.ma _, _ U_liF_31 B r i q_7tnc_ss Cc_our E h_arF ;ass Co+cr_f te;m_{jiciure G ig c efour sEt P icture menu Select Q G'. PNR 3C-C.
E P ause the live TV programmeand resume later (page 19) Control the connectedDIGA recorder to start or stop recording current TV programme(page 19) Controlsthe connected Panasonic equipment Easy control only with VIERAremote control"(page20) Speaker control"(page21) *You can also access VIERA Link Menu directly using the VIERA Link button on the remote control. B asic picture mode (Dynamic/ Standard / Cinema I Eco) " Picture mode will be memorized fbr each TV, AV1, AV2, AV3, PC, HDMI1 and HDM112 mode.
Adjusts volume level of right and left speakers Adjusts the volume level of the headphones G ives a greater spatial effect by using dynamic enhancer (Off / On) *Switchingis also possible by SURROUND button on the remote control. C hooses according to the signal when HDMI is connected (Auto I Digital /Analogue) 0 HDM12terminal is for digital signalonly. P ress the OK button to resetthe present Sound Menu to the default setfings.
The current channelsettings can be changed according to your needs and reception conditions. C __ To freely change settings after Auto setup 10 Selectthe programme number and search through the channel Programme number select programme 0 2 Store (D Repeat (1) - C2) CEOs= search I& If 11r%0 I connected with only the RF cable, OThe.programme select programme Channel number blinks numberV.
The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected.
VIERALink "HDAVI Control" Enjoy additionalHI)MI Inter-Operabilitywith Panasonic products which have 'HDAM Control" function. HDMI connectionsto some Panasonic equipment (PanasonicDVD Recorder DIGA) allow you to enjoy easy playback. Connectionsfor VIERALink " Use fullywired HDMI compliant cable. " Easy controlonly with VIERAremote control. " Read the manuals of the equipment too. After connections turn the equipmenton and then, switch the TV unit on.
Using VIERALink menu OThis function is availablewith DIGA Recorderwhich has HDD and "HDAVI Control"function when watchingTV programmeor input from DIGA Recorder. *If you cannotoperate, check the VIERA Linku setting in m8etupmenu" (page 18) and the equipment. D isplay"VIERA Link menu" 4.qa" pause 0 select"Pause Live TV" and press OK to pause deselect Live TV programmeis recordedon HDD from the point 1twas paused.
You can control some functions of the connected Panasonic equipment with this TV remote control (point the remote controlat the TVs signal receiver). *This functionIs availablewith equipment which has "HDAVI Controln function. 0 If you cannotoperate, check the 6VIERALink" setting in "Setup menu"(page 18) and the equipment. 4D Select"VIERA Link C ontrol" `411*- select 19 Selectthe connected equipmentwhichyou want to access The menu of the equipment is displayed.
You can controlthe theatre speakerwith this TV remote control(point.theremote controlat the TVs signal receiver). OThis function is availablewith Amplifier or Player theatre which has UHDAVI Control" function.
Thesediagram show our recommendations for how to connectthe TV unit to your various equipment.
Types of connectable equipmentto each connector 0 Connect the S-VIDE0 or VIDEO terminal when using AV3 IN terminals. 0 Connect the COMPONENT or VIDEOterminal when using AV2 IN terminals. 0 Reoommended Connection 23 I T X-37LXBOA 0022-EN.
The optimum size and aspectcan be chosen,and you can enjoy finer images. Note *The ratio varies depending on the programme, etc. If the ratio is greater than the standardul 6:9" black bands may appear at the top and bottomof the screen. " If the screensize looks unusualwhen a widescreen-recordedprogrammeis played back on a VCR, adjust the tracking of the VCR. " To selectthe ratio manually: (Only u16:9"or '14:3" in PC mode). 16:9 JUST Directlydisplays the image at "16:9* without distortion (anamorphic).
HDMI (High-DefinitionMultimediaInterface)allows you to enjoy high-definitiondigital images and high quality sound by connectingthe TV and the equipment. HDMI-compatlolsequipment C11) with a HDMI or D%n output terminal,such as a set top box or a DVD player, can be connectedto the HDMI terminal using a HDMI compliant (fully wired) cable. About connectionssee "External Equipment7on page 22. Note " HDMI is the world's first completedigital consumerAV interfacecomplyingwith a non-compression standard.
HDMI connectionsto some Panasonic equipment allow you t o enjoy the easy playback. " Setup the equipment to enablethis function.Read the manual of the equipment. " Switch the TV until on again with the equipment on when connectionor setup is changed. " This function may not work normally depending on the equipment condition. " The equipment can be operatedby TVs remote controlwith this function on even if TV is in Standby mode.
CDIV W hen you receive stereo / bilingual sound system, sound output modes can be selected by pressing the Stereo / Bilingual Sound Selection button. am Nato " If the stereo signal Is poor or the receiving conditions are not optimum or if STEREO: MONO automatic switching occurs, it is recommended you switch from STEREO to MONO. " Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
Beforerequesting service or assistance, please followthese simple guidesto resolve the problem. If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre fiDr assistance. - -------- _% 4r White spots or shadow images (noise) _ 0169 ----------------- I Shop appears on screen at I switch on I& 4QI%i%F1%"ft I -A P.M I so 10 IM %7 11 C1 Setup' Select Homeln Viewing Environmenr (page 6) hb I I- - ---- .
i Snowy Picture Noisy Sound Aeriallocation, direction or connection 1 01 ® MultipleImage i <_.P Normal Sound __ A Interference N ormal Picture ® Cars, motorcycles Fluorescent fights No Picture - No Colour _11 Normal Sound Picture , No Sound `V A ® Electrical appliances Noisy Sound No Sound Poor or Distorted Normal Picture Aerial. location, direction or connections W eak or No sound Volume level S ound mu te sw itc h ed on.
94.0 cm (diagonal) 819.6mm (W) x 460.8 mm (H) 1,049,088 (1,366 (W) x 768 (H Full range x 2 pcs, 8 Q 20 W (10 W + 10 W), 10% THD M3 (3.5 mm) Jack x I VGA,SVGA,XGA 1 7 Systerns:::_Fun_cflon I I PALB,G H Keoeption 2 [PAL roadcast 3 1 _Al- D, K 4 1 SECAM B, G ransmissions and playback MD K "..so 6 1 3EC-AMK1 Cassette Tape I IN S. Wnr .15B 14.5MH7) 1 7 Systems I Function 8 1 NTSC 4.43 / 5.5MHz: 9 1 NTSC 4.4316.OMHz 10 1 N TSC 4.43 / 6.5MHz: Playback from 11 1 NTSC 3.58 / 5.5MHz Special VCR's or 12 1 NTSC 3.
TX-37LX80A_O=-EN.
Customer's Record The model numberand serial numberof this product may be found on its rear panel. You should note this serial numberin the space provided below and retain this book, plus your purchasereceipt, as a p ermanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number M atsushitaElectric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-8692, Japan. TX-37LX80A 0022_EN.
