Operating Instructions LED TV English Model No. TX-24FS500B TX-32FS500B TX-40FS500B (image: TX-40FS500B) For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). How to use [eHELP] (p. 19) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use.
Contents Be Sure to Read Important Notice··················································· 3 Safety Precautions ··············································· 4 Accessories ························································ 7 Installing the TV ··················································· 8 Installing the wall-hanging bracket ··························11 Connections ·······················································12 Identifying Controls ··············································15
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2017) of digital services. Not all the features are available depending on the country, area, broadcaster, service provider and network environment. Compatibility with future services is not guaranteed. Internet apps are provided by their respective service providers, and may be changed, interrupted, or discontinued at any time.
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: Insert the mains plug fully into the mains socket. To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times. Warning Disconnect the mains plug when cleaning the TV. Do not touch the mains plug with wet hands.
If the TV is used in an environment where there is dust or smoke. It is possible for dust/smoke particles to enter the TV through the air vents during normal operation which can become trapped inside the unit. This may cause overheating, malfunction, deterioration in picture quality, etc. Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets.
The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference when using the built-in wireless LAN, keep the TV away from other devices that use 2.4 GHz and 5 GHz signals such as other wireless LAN devices, microwave ovens, and mobile phones. When problems occur due to static electricity, etc., the TV might stop operating to protect itself. In this case, turn the TV off at the Mains power On / Off switch, then turn it back on.
Accessories Accessories may not be placed all together. Take care not to throw them away unintentionally. Note Illustrations shown above may be different between models and countries. Standard accessories Remote Control (p. 15) N2QAYB001181 or N2QAYB001212 Pedestal (p. 8) 32-inch model 40-inch model Mains lead (p. 12) 32-inch model 40-inch model Batteries (2) R6 (p.
Installing the TV 32-inch model Assembly screw (3) M3 × 14 Assembling / Removing the pedestal Assembly screw (4) M4 × 15 Assembly screw (2) M4 × 12 Bracket Pedestal Base Assembling the pedestal Preparations Take out the pedestal and the TV from the packing case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.). Use a flat and firm table bigger than the TV. Do not hold the screen panel part.
Assembling the pedestal 40-inch model Assembly screw (4) M5 × 15 Assembly screw (4) M4 × 12 Bracket (2) Base English 9
Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws from the TV. 2 Pull out the pedestal from the TV. 32-inch model 1 Put the TV onto a work table with the screen panel down on the clean and soft cloth. 2 Remove the assembly screws from the TV. 3 Pull out the pedestal from the TV. 4 Remove the assembly screws from the bracket.
Installing the wallhanging bracket 40-inch model Holes for wall-hanging bracket installation Rear of the TV 200 mm Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
7 AV (COMPONENT / VIDEO) Connections 8 ETHERNET terminal External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. Check the terminal type and cable plugs are correct for connection. Use a fully wired HDMI compliant cable. Keep the TV away from electronic equipment (video equipment, etc.
Satellite receiver Wireless connection TV Internet environment Built-in wireless LAN (Rear of the TV) Access point Other connections DVD Player HDMI cable (COMPONENT equipment) RF cable TV Satellite receiver Terrestrial aerial Connections to HDR compatible equipment Supporting HDR does not increase the peak brightness capabilities of the TV panel. The ability to send a non 4K HDR signal via HDMI depends fully on the playback device. The majority of 4K Blu-ray discs require HDCP2.
USB HDD (for recording) TV Use USB 2 port for connecting the USB HDD. For details, refer to [eHELP] (Search by Purpose > Recording). VIERA Link Use HDMI1 - 2 for VIERA Link connection. For details, refer to [eHELP] (Search by Purpose > Functions > VIERA Link “HDAVI Control™”). HDMI cable Amplifier with speaker system External equipment (DVD Player, etc.) Headphones For information about the volume settings, refer to [eHELP] (Search by Purpose > Settings > Sound). TV (3.
Identifying Controls 7 OK Confirms selections and choices. Press after selecting channel positions to quickly change channel. Remote Control 8 [Option Menu] Easy optional setting for viewing, sound, etc. 9 Coloured buttons (red-green-yellow-blue) Used for the selection, navigation and operation of various functions. 10 Volume Up / Down 11 Numeric buttons Changes channel and teletext pages. Sets characters. When in Standby mode, switches TV on.
Installing / Removing batteries Pull open Hook 4 Input mode selection Press repeatedly until you reach the desired mode. [Main Menu] Press and hold for about 3 seconds to display main menu. OK (when in the menu system) 5 Channel Up / Down Cursor Up / Down (when in the menu system) Close 6 Volume Up / Down Cursor Left / Right (when in the menu system) 7 Mains power On / Off switch Use to switch the mains power.
First time Auto Setup If tuning has failed check the RF cable, and the network connection, and then follow the on-screen instructions. When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 12 - 14) and settings (if necessary) of the connected equipment before starting Auto Setup.
Watching TV 1 Turn power on (TV) or (Remote Control) Mains power On / Off switch should be on. (p. 15) Displays the information bar at the bottom of the screen for several seconds. For information about the operation and settings, refer to [eHELP]. (Search by Purpose > Read first > Features) 2 Select the mode Selectable modes vary depending on the channels stored. 3 Select a channel up down or To select a channel position with 2 or more-digit, e.g.
How to Use eHELP [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature.
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. For details, refer to [eHELP] (Support > FAQs). The TV does not switch on Check the mains lead is plugged into the TV and the mains socket. The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 4) The TV goes into Standby mode Auto power standby function is activated. The remote control does not work or is intermittent Are the batteries installed correctly? (p.
Maintenance First, remove the mains plug from the mains socket. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Specifications AUDIO L - R TV Y Model No. PB/CB, PR/CR Pin jack × 2 0.5 V[rms] 1.0 V[p-p] (including synchronisation) : TX-24FS500B ±0.35 V[p-p] 32-inch model : TX-32FS500B 40-inch model : TX-40FS500B HDMI 1 / 2 input TYPE A Connectors Dimensions (W × H × D) 562 mm × 409 mm × 180 mm (With Pedestal) 562 mm × 344 mm × 62 mm (TV only) HDMI1: Content Type HDMI2: Content Type, Audio Return Channel This TV supports “HDAVI Control 5” function.
Aerial input UHF VHF / UHF Operating conditions Temperature 0 °C - 35 °C Humidity 20 % - 80 % RH (non-condensing) Built-in wireless LAN Standard compliance and Frequency range* IEEE802.11a/n 5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz IEEE802.11b/g/n 2.412 GHz - 2.472 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP (64 bit/128 bit) *: The frequency and channel differ depending on the country. Note Design and Specifications are subject to change without notice.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
