Operating Instructions

5
Pressandreleaseheretoopenflap
6
Slight tilting of the picture may be noticeable or coloured patches may sometimes
appear at the corners of the screen (colour purity). The Geomagnetic Correction
feature can be used to eliminate them, if necessary:
First, ensure the ATP and Q ---Link download procedures are complete. The screen
should not be showing any On ---Screen Display menus.
Press the F button repeatedly until the Geomagnetic Correction feature is displayed.
F
Press the + or --- buttons repeatedly until the picture appears to be level.
--- / v
Press the F button again to return to normal viewing. Close the flap to prevent damage.
F
Adjust Volume
Change Programme
You are now ready to begin viewing programmes
The cursor controls provide the two basic functions:
8
We recommend that as soon as the Auto setup feature is completed, the picture
control s are reset to normal viewing levels. To do this, press the ”N” button, found
under the remote control’s pull down flap.
N
7
Using the remote control keys indicated, access the Geomagnetic Correction menu
option and follow the procedure below (for a full explanation of the On Screen
Display menu system see page 7) :
Press the SETUP menu button
Move to the Geomagnetic menu option
Access the Geomagnetic menu
Adjust the picture tilt as necessary
Press the TV/AV button to exit the SETUP menu
TV/AV
SET UP
The function ’geomagnetic correction’ is also accessible from the front panel.
QUICK START GUIDE