Operating Instructions

4
Plug in aerial and connect ancillary equipment.
1
OR
VCR / DVD
SATELLITE RECEIVER
AV2
AV1
AV2
AV1
First, ensure that the VCR is in Standby mode.
Plug in TV and switch on.
Select your country.
Press the red button
2
3
4
Auto setup will begin, your stations will be located and stored.
Use the Programme Edit menu to delete unwanted stations
(see page 15).
Press the TV/AV button to exit.
TV/AV
D If the VCR has not accepted download data from the TV, you may need to select the Download option from the VCR’s menu.
D If Q --- Link is not operating correctly, check it is connected to the television’s AV2 socket, the SCART lead is a “full function” type, and
the VCR is compatible with Q --- Link,
NEXTVIEWLINK or similar technologies. Ask your dealer for further details.
D For further information on Q --- Link and connecting equipment, see pages 21, 25 and 26.
If you are installing a new Q --- Link compatible VCR, you can now switch it ON. Downloaded tuning data will match the
television’s.
If you are installing a new
NEXTVIEWLINK compatible VCR, you will need to initiate download manually.
See the VCR handbook for details.
5
QUICK START GUIDE