Operating instructions

27
Q-- Link allows the television to communicate with your VCR (DVD/R)
Open the Main menu
Move to Setup menu
Access Setup menu
Move to Q-- Link
Confirm the setiing is correct
for connected Q-- Link device
(AV1 or AV2)
Press the TV/AV button to exit
The V C R (DV D/R) must b e connected wit h a SCART lead ( full function typ e) attached between the
AV1 or AV2 sock et of the television and the approp r iate sock et on your VC R (DV D/R). See the V CR
(DVD/R) handbook for further informatio n. Q -- Link, NEXTVIEWLINK or similar technology allows
the television to instruct a compatible VCR (DVD/R) to record the programme that is currently
being dis played on screen, reg ard less of which prog ra mme p ositi on is V C R ( DVD/R) curr ently set
to, thus simplifying the process of recording programmes.
To record the programme you are currently watching
Press the DIRECT TV REC button on the remote control
DIRECT T
V
REC
If the VCR (DVD/R) is off, it will automatically switch on when you press the DIRECT TV REC button.
A message, sent from the VCR (DVD/R), will appear on screen showing what is being recorded, or if it
is not possible to r ecord:
DOWNLOAD IN PROGRESS
Recording TV source
Recording stopped - TV source changed
No recording - Check tape or disc
VCR (DVD/R) is recording the programme
signal from its o wn tuner. If you wish you
canswitchofftheTVandleavetheVCR
(DVD/R) recording in the normal way.
VCR (DVD/R) is recording the programme signal
from the television.
You must not change programme position or
switchofftheTV:ifyoudo,theVCR(DVD/R)will
automatically stop recording and switch off.
The write protection tab on the back of the
cassette has been removed.
Unable to download, - Check Equipment
Download
DOWNLOAD. Programme :
Examples of other messages that might be displayed are:
Recording in progress
Q-- LINK
Setup menu
+
OK
Select
Change
Exit
Return
AV1 out Monitor
AV2 out TV
Teletext FLOF
Off timer Off
Q-Link AV2
Text language West
Tuning menu
OSD language Access
Geomagnetic
MENU
TV/AV