Dear Panasonic Customer, Welcome fo the Panasonic family of customers. We hope that you have many years of enjoyment from your new color television The best way to understand the features of this television is to read this book thoroughly, before operating the set, jig's This television has a low power consumption making it very cost effective to run. \Quell/ To this end, the standby power consumption is merely 1 watt.
WARNINGS AND PRECAUTIONS This TV, is designed to operate on A.C. 220 ~ 240V, 50Hz and is capable of receiving the PAL | transmission standard. Do not expose this TV set to rain or excessive moisture. WARNING: HIGH VOLTAGE 1 Do not remove the rear cover, there are no user serviceable parks inside. Avoid exposing the TV set o direct sunlight or other sources of heat, CABINET AND PICTURE TUBE CARE Remove the mains plug from the wall socket.
ACCESSORIES Check that you have the accessories and items shown TV Guarantee e Operating Instruction book ] OBSESSIVE-2 Toe CORR Guarantees Questionnaire TV. Stand TS—PB00 (TX-214T1) Remote Control Transmitter EURS11300 AV cover TKK8E043 (TX=21JT1) Batteries for the Remote Control Transmitter.
INSTALLATION AND SET-UP # TV only Sins Socket Connect Aerial co—axial cabin direct socket. OR USING A VCR Conn act aerial co~axial cable to RF Input socket of VCR and a RF co—axial cable from VCR AF Out socket socket The VGR can also be connected to the TV using a SCARY to SCARY idea. Further details of Audio/ Video connections can be round on page 13. OR USING A VCR AND SATELLITE RECEIVER Conn act aerial co—axial cable to BF Input socket of VCR. A further co-axial cable connects from the VCR .
INSTALLATION AND SET-UP *1. *2. Switch ON your VCR (if connected). ¥ the TV has not been tuned for you then Switch ON your Satellite Receiver (if Auto setup will begin. TV stations will be Plug the TV into & mains socket and switch ON, located, sorted and stored *2 Programmed will appear immediately if your dealer has already tuned the TV for you. h¥. . = Programmer change If you have an analogs satellite receiver, select ‘Sky One’ or "Sky News’ before starting Lute Setup.
LOCATION OF CONTROLS Menu Title Cursor Bar Sub Menu COMMANDS | s A guide to the various options available when in On Screen Menu operations. Headphone socket Mains Power On/Off switch ! b RCA Audio/Video sockets STR e e Stores tuning and other function settings Switches between TV and AV modes firm, A+ Selects & function from : ' Volume, Contrast, Brightness. Color, Sharpness, fT:c::gr{ displayed, end Manual Tuning. allows adjustment of the function.
MENU OPERATION Menu operation Is to be used In conjunction with the On Screen Display commands to guide you through function adjustments and tuning operations Auto Setup start Display Menu / Previous Menu Adjust / Access Select Exit Menu Main Menu Contrast Brightness Co lour Sharpness The Contrast, Brightness, Co lour and Sharpness may be altered to suit the viewing conditions and personal preferences.
MENU OPERATION Tuning Menu The Tuning menu provides access to both manual and automatic fining menus. Display Menu and select “Tuning Menu” Access “Tuning Menu” Auto Setup The Auto Setup menu allows you to automatically re tune the TV, particularly useful if you move to an area that is served by a different transmitter.
MENU OPERATION Shipping Condition start Manual Tuning store Select Manuel Tuning programmer select: Adjust / Access Manual Tuning search Display Menu / Previous Menu Exit Menu Manual Tuning The Manual tuning menu patios individual programmer positions to be tuned manually. First access the Tuning menu as described on Page 9. 1. Choose programmer position 2. Search for channel 3.
MENU OPERATION Shipping Condition (Continued) Ready for Audio Setup or Manual Tuning. Refer to Page 9 and 10. Confirm Start Swap It the programmer order after Lute Setup is not to your preference you can swap programmed between positions. An example could be for regional variations, e.g. BBC Wales and BBC West, where you may want 1o swap them sa that BBC Wast appears on programmer position 1. First access the Tuning menu as described on Page 9.
TELETEXT OPERATION o Teletext features may vary depending on the Broadcasting Companies and are only available if the selected channel is transmitting Teletext. » If the F button is pressed in Teletext mode the cyan contrast scale will appear; press buttons and to change the settings. o When in Teletext mode, the volume may still be adjusted by pressing buttons or What is LIST mode? In LIST mode four differently colored page numbers are situated at the bottom of the screen.
AUDIO / VIDEO CONNECTIONS (FRONT OR REAR) AY (Audio / Video) is a dedicated input for VCR's, Satellite Receivers and other Audio / Video equipment. This TV is capable of switching to AV operation automatically it the equipment connected provides a switching signal to the SCARY socket. In this condition the display will show EC and it is possible to change the programmer position of the TV without changing the displayed picture (this is not possible when using the front AV connections).
VCR i Installation Your new TV is supplied with programmer position ‘0" designed specifically to receive an RF signal from a VCR. However, depending on the VCR's setting you may not receive any picture or soured from the VCR on programmer position ‘0’ of the TV. 1t wail be necessary to either adjust the RF channel of the VCR or to adjust the tuning of the TV's programmer position ‘0’ or both unit the RF output channel! of the VCR is received.
VCR OPERATION The Remote Control is capable of operating some functions of selected Panasonic VCR's, please consult your dealer for details, Some VCR's have different functions, so to ensure compatibility please refer to the VCR's instruction book, VCR (D VCR Standby Record 04> Pause Til VCR programmer up / down Rewind / Review O s Fast Forward / Cue > 15
TROUBLE~SHOOTING Before calling for service, determine the symptoms and make few simple checks as shown below. For service please contact your coal Panasonic dealer quoting the medal number and serial number (both are located at the rear of the TV). ety e : AR Snowy Picture Noisy Sound or or Aerial location, direction or connection Multiple Images Norma Sound Noisy Sound Electrical appliances, vehicles, fluorescent lights Narmada Pictures Noisy or Ne Sound Volume revel or sound muted N Not plugged into A.C.
SPECIFICATIONS Mo def Number: TX~21411 TX-14JT1 Power Source: 220240V 50Hz A.C. Fowler Consumption: 25 53W [ 33W Standby Power Consumption: 1,1W Picture Tube: Scum visible diagonal [ 34cm visible diagonal Audio Quip {music) 6W, BE2 impedance, mono Dimensions: 476 (H} x 512 (W) x 470 (D) mm 852 (H) x 371 (W) x 371.
