Panasonic TX-21S3T/Z TX-14S3T TX-14S3T/W Contrast Auto Tracking System (U.K.
Dear Panasonic Customer, Welcome to the Panasonic family of customers, We hope that you have many years of enjoyment from your new color television. The best way to understand the features of this television is 10 read this book thoroughly, before operating the set. i This television has a low power consumption making it very cost effective to run. SNy, . .
WARNINGS AND PRECAUTIONS This TV. is designed to operate on A.C. 220 ~ 240V, . 50Hz and is capable of receiving the PAL | transmission standard. Do not expose this TV set to rain or excessive moisture. WARNING: HIGH VOLTAGE | Do not remove the rear cover, there are no user serviceable parts inside. . Av old exposing the TV set fo direct sunlight or other sources of heat. CABINET AND PICTURE TUBE CARE Remove the mains plug from the wall socket.
ACCESSORIES Check that you have the accessories and items shown 21832 TH-1465TH TX 1255 Operating Instruction book Yy, AV Cover " TKKSEQ27 1 ~2183T/Z) CRT Guarantee ™ ) Questionnaire Batteries for the Remote Control Transmitter. {2 x R6 {UM3) size) T.V.
INSTALLATION AND SET-UP TV ably Connect Aerial co—axial cable direct socket. OR USING AVER Connect aerial co—axial cable to BF input socket of VCR and a RF co-axial cable from VOR AF Qut socket socket, The VCR can also be connected to the TV using a SCARY to SCARY lead. Further details of Audio/ Video connections can be found on page 13. OR USING A VCR AND SATELLITE RECEIVER Connect aerial co-axial cable to RF Input socket of Satellite Receiver.
INSTALLATION AND SET-UP *1. *2. Switch ON your VCR {if connected). If the TV has not been tuned for you then Switch ON your Satellite Receiver (it Auto setup will begin. TV stations will be Plug the TV into & mains socket and switch ON. located, sorted and stored.*2 Programmed will appear immediately ¥ your dealer has already tuned the TV for you. Volume stadium e Programmer change The first available channel will be displayed.
LOCATION OF CONTROLS Menu Title Cursor Bar Sub Menu Commands : A guide to the various captions available when in On Screen Peru operations. Mains Rawer Nonfood switch STR Stores tuning and other friction settings [ Selects a function from Volume, Contrast, Brightness, Co lour, Sharpness, and Manual Tuning. Standby Nonfood Adjusts currently selected function.
MENU OPERATION Menu operation is to be used in conjunction with the On Screen Display commands to guide you through function adjustments and tuning operations Auto Setup start Display Menu / Previous Menu Adjust / Access Select Exit Menu Main Menu Contrast Brightness Co lour Sharpness The Contrast, Brightness, Co lour and Sharpness may be altered to slut the vising conditions and personal preferences.
MENU OPERATION Tuning Menu The Tuning'menu provides access to both manual and automatic tuning menus, Display Menu and select “Tuning Menu” Access “Tuning Menu” Auto Setup The Auto Setup menu flows you to automatically re tune the TV, particularly useful you move to an area that is served by a different transmitter. First access the Tuning menu as described above.
MENU OPERATION Shipping Condition start Manual Tuning store Select Manual Tuning programmer select: = b Adjust [ Access h Manual Tuning search Display Menu / Previous Menu Exit Menu Manual Tuning The Manual tuning menu allows individual programmer positions to be tuned manually. First access the Tuning menu as described on Page 9. 1. Choose programmer position 2. Search for channel 3.
MENU OPERATION Shipping Condition (Continued) Ready for Auto Setup or Manual Tuning. Refer to Page 8 and 10. Confirm Start LATVIA D) Swap If the programmer order after Auto Setup is not to your preference you can swap programmers between positions. An example could be for regional variations, e.g. BBC Wales and BBC West, where you may want to swap them so that BBC West appears on programmer position 1. First access the Tuning menu as described on Page 9.
TELETEXT OPERATION Teletext s the broadcasting of pages of information on your T.V. screen containing various subjects, the order and availability of which is dependent upon the Broadcasting Companies. #1he Function Select key (F) is pressed whilst in Teletext operation, only the Contrast can be adjusted.
AUDIO / VIDEO CONNECTIONS (FRONT OR REAR) AV (Audio / Video) is a dedicated input for VCR's, Satellite Receivers and other Audi / Video equipment. This TV is capable of switching to AV operation automatically if the equipment connected provides & switching signal to the SCARY socket. In this condition the display will show EC and it is possible to change the programmer position of the TV without changing the displayed picture (this is not possible when using the front AV connections).
VCR INSTALLATION Your new TV is supplied with programmer position 0’ designed specifically to receive an RF signal from a VCR, However, depending on the VCR's setting you may not receive any picture or sound from the VOR on programmer position '0" of the TV. will be necessary to either adjust the RF channel of the VOR or to adjust the turning of the TV's programmer position ‘0’ or both antithetic AF output channel of the VCR is received.
VCR OPERATION The Remote Control is capable of operating some functions of selected Panasonic please consult your dealer for details. Some VCR’s have different functions, so to ensure compatibility please refer to the VCR's instruction book.
TROUBLE-SHOOTING Before calling for service, determine the symptoms and make a few simple checks as shown blow. For service please contact your local Panasonic dealer quoting the model number and serial number (both are located at the rear of the TV). Snowy Picture Noisy Sound or or Aerial location, direction or connection Multiple images Normal Sound interference Noisy Sand Electrical appliances, vehicles, fluorescent fights Norma Picture Noisy or No Sound Volume level or sound muted Not plugged into A.
SPECIFICATIONS Model Number: TX~21837T/Z ] TX~1483T, TX~1483T/W Power Source: 220240V 50Hz A.C.
