Operating instructions

ManualsBrandsPanasonic ManualsLCD TVsTX14B4T

Tuning --- Shipping Condition

Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in. This is

useful, for example, if you move to a different area when you will probably want the TV to tune itself to

your new local stations.

ThiscanbedoneeitherthroughtheShipping Condition menu or through the Auto setup menu.

The Shipping Condition menu will reset all data, clearing all tuning information and resetting all

control levels back to factory settings.

You may need to adjust your VCR or programme position 0 VCR after operating the Shipping

Condition menu -- refer to page 18.

Press the F button.

Select Setup menu.

Select Tuning menu.

Select Shipping Condition.

Access Setup menu.

Access Tuning menu.

Access Shipping Condition.

Switch TV off and wait for a few

seconds.

Switch TV on again.

Auto setup will begin, stations will

be located, sorted and stored

ready for use. See page 12.

Press TV/AV button to start

CH44

Shipping Condition

Tuning data will be erased!

Setup Menu

Auto

Normal

Access

Colour Balance

Tuning Menu

Aspect

Manual Tuning

Swap

Owner ID

Auto Setup

Tuning Menu

Off

Access

Child Lock

Shipping Condition

Select

Access

Exit

Return

Select

Access

Return

Exit

Store

Return

Exit

Start

Summary of content (9 pages)

PAGE 1
Tuning --- Shipping Condition Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in. This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations. This can be done either through the Shipping Condition menu or through the Auto setup menu. The Shipping Condition menu will reset all data, clearing all tuning information and resetting all control levels back to factory settings.
PAGE 2
Tuning --- Owner ID Owner ID allows you to enter a security code and address information so that in the unfortunate event of theft it will help the Police to determine the owner. If the Owner ID information was not entered after Auto setup or it is necessary to alter some of the ID information it can be re--accessed via the Tuning menu. Press the F button. Select Setup menu. Setup Menu Access Setup menu. Auto Normal Aspect Colour Balance Select Tuning menu.
PAGE 3
Swap --- Programme swapping The Swap option allows you to swap two programme positions. Press the F button. Select Setup menu. Access Setup menu. Swap Programme 01 with Programme 02 CH44 BBC1 CH41 ITV Swap Select Tuning menu. Select Adjust Return Exit Access Tuning menu. Select Swap. Access Swap. Select first programme position. Move down to Programme 02 row. Select second programme position. Confirm by pressing the TV/AV button. Press the N button to exit.
PAGE 4
VCR Controls The Remote Control is capable of operating some functions of selected Panasonic VCRs. Other VCR equipment may have different functions, so to ensure compatibility please refer to the equipments instruction book or consult your dealer for details. VCR Standby VCR Press to switch the VCR to standby mode. Press again to switch back on. Play Press to playback the tape. Stop Press to stop the tape. Fast Forward/Cue Press to fast forward the tape.
PAGE 5
VCR and Satellite Receiver installation Your new TV is supplied with programme position 0 set to receive an RF signal from your VCR, although a Scart connection is preferable if the VCR is so equipped. However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or sound from your VCR on programme position 0 of the TV.
PAGE 6
Teletext function D Teletext features may vary depending on the Broadcasting Companies and are only available if the selected channel is transmitting Teletext. D If the F button is pressed in Teletext mode the cyan contrast scale will appear; press buttons+ and -- to change the settings. D When in Teletext mode, the volume may still be adjusted by pressing buttons + or -- . What is FLOF (FASTEXT)? In FASTEXT mode four differently coloured subjects are shown at the bottom of the screen.
PAGE 7
EXTERNAL AUDIO/VIDEO CONNECTIONS Rear AV SCART 21---pin Terminal and front RCA Socket Audio/video (AV) inputs are designed to connect a VCR, a Satellite Receiver and other compatible audio/video equipment. Rear input/output of AV SCART connector Front AV panel AV cover SCART cable L -- R audio input socket V --- video input socket VCR Headphones socket 2x RCA audio cables RCA video cable VCR SATELLITE RECEIVER Headphones with 3.
PAGE 8
TROUBLESHOOTING Symptoms Picture Check Sound Aerial location, direction or connection Snowy picture Noisy sound Aerial location, direction or connection Multiple images Normal sound Electrical appliances Cars/motorcycles Fluorescent lights Interference Noisy sound Volume level Check whether the Mute function has been activated on Remote Control. Normal picture No picture No sound No sound TV set to AV mode Not plugged into A.C.
PAGE 9
USER INFORMATION H Service H Last position memory Before requesting service, please refer to the trouble ---shooting guide on previous page to determine the symptoms. To obtain service please contact your local Panasonic dealer quoting the model number and serial number (both are located at the rear of the TV). Certain functions have a last position memory, i. e.