Operating Instructions

21
English
Making Initial
Settings
When the initial settings screen is
displayed
When you turn on the projector for the first time
after purchase, or when you run [Storage &
reset]→[ShippingCondition]fromtheSettings
menu, the initial settings screen appears after the
start of projection. Make the settings according to
your usage conditions and status.
In other cases too, you can change the settings
from the Settings menu. P. 26
Set the display language
Select the language to be displayed on screen.
After making the initial settings, you can change
the language under [Language] in the Settings
menu.
1
Select the display language by
using the
buttons.
日本語
Deutsch
Italiano
English Español Français
Nederlands
Language
2
Press the <OK> button and make
the following initial settings.
Set the usage environment
Normally, select [HOME]. ([SHOP] is a mode that
is exhibited at stores, etc.)
1
Select [HOME] by using the
buttons.
Viewing environment
Please select your viewing environment.
HOME SHOP
2
Press the <OK> button and make
the following initial settings.
Set the network connection
Make the settings for connecting the projector to
the home network.
To use the DLNA and mirroring functions, it is
necessary to connect to the home network.
•
The applications and service contents that can
be used are subject to change without prior
notice.
•
If you do not want to set the network
connection, or want to set it later, select [Setup
later], and proceed to the next settings.
1
Select [Setup now] by using the
buttons.
Network Connection
Set up a network connection in order to enjoy a variety of
features available through a Home network.
Select "Setup now" for wireless connection.
Setup now Setup later
2
Press the <OK> button.
•
Make the settings according to the
instructions on the screen.