Operation Manual

Accessories / Options
Quick Start Guide
8
Assembly screw (4)

XSS5+15FNK
M5 × 15
Assembly screw (4)

XYN4+F25FJK
M4 × 25
Bracket

TBL5ZA32261 (TX-L32E5B)

TBL5ZA32591 (TX-L37E5B)

TBL5ZA32821 (TX-L42E5B)
(TX-L47E5B)
Base

TBL5ZX0280 (TX-L32E5B)

TBL5ZX0276 (TX-L37E5B)

TBL5ZX0272 (TX-L42E5B)

TBL5ZX04091 (TX-L47E5B)
1
Assembling the pedestal
Use the assembly screws
to fasten the bracket
to the base securely.

Make sure that the screws are securely
tightened.

Forcing the assembly screws the wrong way
will strip the threads.
2
Securing the TV
Use the assembly screws
to fasten securely.

Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.

Carry out the work on a horizontal and level surface.
B
Arrow mark
Hole for pedestal installation
D
C
A
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
from the bracket.
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.

The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Screw hole
tx_l37_42_47e5b_Eng_2222.indb 8 1/30/2012 11:34:00 AM