® CONTROLLER / TUNER POWER Operating Instructions INPUT 3 R-STAND BY G-POWER ON S-VIDEO MENU ACTION INPUT VOLUME VIDEO L-AUDIO-R CHANNEL Model No. TU-PTA500U D IO 3 U T L- A U IN P O V ID S -V CH VO MEN PO WE R U ACT IO N IM P ANN ID E -R E O EL E LUM UT Y D B TAN ON R-S WER O G-P For assistance, please call : 1-888-VIEW-PTV (843-9788) or send e-mail to : consumerproducts@panasonic.com or visit us at www.panasonic.co.
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
Important Safety Instructions Power-Cord Protection Power-supply cords shall be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Attachments Do not use attachments / accessories not recommended by the product manufacturer as they may cause hazards.
Important Safety Instructions e. When the product exhibits a distinct change in performance - this indicates a need for service. f. If the product has been exposed to rain or water. Installation This unit Location Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture. Optional External Equipment The Video / Audio connection between components can be made with shielded video and audio cables.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Controller / Tuner set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions.
Installation ACCESSORIES Check the accessories before installations.
Installation Controls and terminals on the CONTROLLER / TUNER CONTROLLER/TUNER TU-PTA500U POWER INPUT 3 R-STAND BY G-POWER ON S-VIDEO MENU ACTION INPUT POWER Indicator (see page 15) VOLUME VIDEO L-AUDIO-R CHANNEL Menu button (see page 18) Input 3 terminals Video camera cable terminal Action button (see page 19) Input mode selection buttons (see page 26) Volume up (+) / down (–) buttons (see page 18) Program number selection buttons (see page 19) RF Input terminal (see page 8 – 9) DISPLAY OUT
Installation Connecting the antenna cable to the RF In Terminal Antenna Connection - For proper reception of VHF / UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to this unit.
Installation Antenna Connection (Cable Box, no VCR) Use this configuration when connecting this unit to a cable TV system using a Cable Box. CABLE BOX ANT AUDIO OUT COMPONENT VIDEO INPUT TERMINAL ON BACK OF CABLE BOX OUTPUT PC-IN 1 1 INPUT 2 2 DISPLAY OUT AUDIO R - L PR - PB - Y VIDEO AUDIO R - L VIDEO S-VIDEO OUTPUT INPUT ANTENNA TERMINAL ON THE BACK OF THIS UNIT.
Installation How to connect this unit and Wide Plasma Display ANT AUDIO OUT COMPONENT VIDEO INPUT OUTPUT PC-IN 1 1 INPUT 2 2 DISPLAY OUT AUDIO R - PR L - PB - Y VIDEO AUDIO R - L VIDEO S-VIDEO Display cable (Supplied) L L AUDIO S-VIDEO AUDIO VD VIDEO HD PR/CR/R PB/CB/B Y/G R AUDIO R COMPONENT/RGB IN PC IN TUNER IN SERIAL + — VOL INPUT / POWER ON R - STANDBY G POWER Back view of Wide Plasma Display Notes: Install the CONTROLLER/TUNER at least 15.
Installation How to connect the OUTPUT Terminals VCR Connect to the S-VIDEO or Video terminals. S-Video IN S-VIDEO cable Video IN VIDEO L Audio IN R AUDIO Video Monitor OUTPUT R - STANDBY INPUT — VOL + G POWER ON OUTPUT 1 Note: The video signal input to the COMPONENT input and PC input will not be output from the output terminal. INPUT 2 AUDIO R - VIDEO L S-VIDEO How to connect the AUDIO OUT Terminals Used for connecting external amplifiers.
Installation How to connect the “1, 2” Input Terminals Connects VCRs and other peripheral equipment (INPUT 1, 2) (Example) When connecting a S-VIDEO VCR S-VIDEO cable S-VIDEO VCR S-Video OUT Video OUT L Audio OUT 2 × RCA audio cable R INPUT OUTPUT 1 INPUT 2 AUDIO R - L VIDEO S-VIDEO (Example) When connecting the Composite Video connector.
Installation How to connect the Input 3 Terminals POWER INPUT 3 R-STAND BY G-POWER ON S-VIDEO MENU ACTION INPUT VOLUME VIDEO L-AUDIO-R CHANNEL INPUT 3 S-VIDEO A video camera uses the Video Input 3 terminal on the front of this unit. VIDEO L-AUDIO-R Connect the S-VIDEO or VIDEO terminal.
Installation How to connect the PC Input Terminals Computer POWER INPUT 3 R-STAND BY G-POWER ON S-VIDEO MENU ACTION INPUT VOLUME VIDEO L-AUDIO-R CHANNEL PC-IN Conversion adapter (if necessary) D-sub 15p RGB PC cable Connect a cable which matches the audio output terminal on the computer. 1/8” (3 mm) stereo plug Notes: (1) Computer signals which can be input are those with a horizontal scanning frequency of 15.5 to 110 kHz and vertical scanning frequency of 48 to 120 Hz.
Power ON / OFF and Input Signal Selection Power ON / OFF POWER Connect the plug to the Wall Outlet Push the POWER switch on this unit to turn the set on POWER-ON Power Indicator: Green INPUT 3 R-STAND BY G-POWER ON S-VIDEO MENU ACTION INPUT VOLUME VIDEO L-AUDIO-R CHANNEL Example: The screen below is displayed for a while after this unit is turned on. (setting condition is an example.
Location of Controls Illuminated Remote Control Power button Press to turn this unit ON or OFF. (See page 15) Note: The CONTROLLER / TUNER’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch. MUTE button Push this button to mute the sound. (See page 33) Mode Selection buttons Selects the operation mode for the remote control.
Location of Controls ASPECT button Change of screen size (See page 22). Panasonic AUTO NORMAL FULL JUST Turning ON and OFF the remote control illumination ZOOM R-TUNE Lights the remote control buttons The selected button blinks when lit. + INFO/RECALL LIGHT POWER Remote control illumination can be turned ON and OFF by pressing the INFO/RECALL button while pressing the R-TUNE button.
Flow Chart of Main menu 1 MENU If the MENU button is pressed, the MENU screen will be displayed. If the MENU button is pressed once more while the menu screen is displayed, the MENU screen will be cleared. The MENU button on the unit can also be pressed to display the MENU screen. 2 Select MENU desired by pushing Right “ ” button or Left “ ” button. CH VOL ACTION VOL CH The Right “ ” button and Left “ ” buttons on the unit can also be used to select items on the MENU screen.
Flow Chart of Main menu 3 The CHANNEL button on the main body can also be pressed to select items in the MENU screen. CH 1 ACTION VOL CH TO PICTURE ADJUST screen 2 TO POSITION/ SIZE adjust screen POSITION / SIZE PICTURE ADJ.
Tuning channels (Automatic channel programming) Automatically searches and adds receivable channels in the installed area and / or CATV signals to the program. Channel tuning cannot be performed when the MAIN picture is not receiving a TV broadcast (tuning is not possible). 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP LANGUAGE 2 CH PROGRAM CHANNELS Press to select PROGRAM CHANNELS.
Tuning channels (Manual channel programming) Use this setting when changing setting of receiving channels or changing the channel display. Turn this unit on and select the broadcast channel. Follow the steps on the previous page to display the PROGRAM CHANNEL screen. This PROGRAM CHANNEL screen can be displayed when the MAIN picture is a TV broadcast. 1 2 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST LANGUAGE CH PROGRAM CHANNELS Press to select PROGRAM CHANNELS.
ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT LIGHT POWER ASPECT button The aspect mode changes each time the ASPECT button is pressed.
ASPECT Controls Picture Mode Explanation 4 The display will automatically become enlarged (depending on the picture source), allowing you to view the picture at its maximum size. 16 Panasonic AUTO 3 For an elongated image 9 Image is expanded 4 Panasonic AUTO 3 Changes in accordance with the Panasonic AUTO mode setting (see page 49) For a 4:3 image NORMAL will display a 4:3 picture at its standard 4:3 size.
VHF, UHF and CATV INPUT 3 R-STAND BY G-POWER ON POWER S-VIDEO MENU ACTION INPUT VOLUME VIDEO L-AUDIO-R CHANNEL Operation can be done from this unit. • Channel buttons • Volume buttons Power switch 1 Press to turn this unit on (See page 15). POWER LIGHT POWER ASPECT MUTE AUX DVD R VC 2 TV/VIDEO Press to operate this unit with the remote control. TV RC VR CBL DTV TV CH DB VOL ACTION VOL S 3 CH Press to select the desired channel.
Cable TV ANTENNA TERMINALS ON THE BACK OF THIS UNIT. POWER INPUT 3 R-STAND BY G-POWER ON S-VIDEO MENU ACTION INPUT VOLUME VIDEO L-AUDIO-R CHANNEL To antenna Input Incoming Cable from Antenna or Cable TV System. When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4 (see page 9). This does not apply when signal is input from VIDEO INPUT.
Selection input signal Confirming connection of the connector for desire selection signal. COMPONENT 1 TV COMPONENT 2 VCR ANT AUDIO OUT COMPONENT VIDEO INPUT OUTPUT PC-IN 1 1 Laser Disk Player INPUT 2 2 DISPLAY OUT AUDIO R - PR L - PB - Y VIDEO AUDIO R - L VIDEO S-VIDEO PC DVD Player VIDEO 1 This equipment can also be connected to the rear terminals. See Connections for details. VIDEO 2 VIDEO 3 A video camera uses the Video Input 3 terminal on the front of this unit.
Recall Recall (On-screen display) TV, VIDEO input mode LIGHT The channel number remains, but other information disappears after 10 seconds. Press this button again to delete channel number display.
Adjusting screen POSITION/SIZE (TV, VIDEO input mode) Adjusting screen 1 ASPECT Press to select the screen mode to adjust. LIGHT POWER 2 ASPECT MENU MUTE Press to display the MENU. R VC Press to select ADJUST menu.
Adjusting screen POSITION/SIZE (TV, VIDEO input mode) Switching screen width During NORMAL mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2. Press to widen (SIZE 2). CH VOL ACTION (SIZE 1) (SIZE 2) (SIZE 1) (SIZE 2) VOL CH Press to narrow (SIZE 1). During JUST mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2. Press to enlarge image horizontally (SIZE 2). CH VOL ACTION VOL CH Press to shrink image horizontally (SIZE 1).
Adjusting PICTURE POS./SIZE (PC input mode) 1 MENU Press to display PC MENU screen. LIGHT POWER ASPECT 2 PC MENU CH VOL ACTION VOL Press to select the PICTURE POS./ SIZE. MUTE PICTURE PICTURE POS. / SIZE R VC SOUND SIGNAL TV/VIDEO DVD AUX DTV CBL RC VR TV CH DB VOL ACTION VOL S SELECT CH 3 Press to display PICTURE POS./SIZE menu screen. Press to select the menu to adjust each item. CH VOL ACTION VOL Select the desired level by best each position/size.
Adjusting PICTURE POS.
Sound Adjustments (TV, VIDEO input mode) 1 2 MENU ADJUST Press the MENU button to display the MENU screen and select ADJUST. Select SOUND ADJUST of ADJUST from the MENU screen. POSITION / SIZE AUDIO SOUND ADJUST CH Press to select SOUND ADJUST VOL ACTION SET UP PICTURE PICTURE ADJUST AUDIO MODE VOL PAGE ACTION SELECT EXIT CH 3 Press to SOUND ADJUST screen is displayed. Press to select the menu to adjust each item. CH Select the desired level by listening at the sound.
Sound Adjustments (PC input mode) 1 PC MENU Press the MENU button to display the PC MENU screen. PICTURE PICTURE POS. / SIZE 2 SOUND CH SIGNAL Press to select SOUND. SELECT VOL ACTION VOL EXIT SOUND CH 3 NORMALIZE AUDIO MENU BASS TREBLE BALACE SURROUND Press to display SOUND menu screen, Select of adjust each item. Press to select the menu to adjust. CH NORMAL ADJUST STANDARD 0 0 0 ON SELECT EXIT Select the desired level by listening to the sound.
Picture Adjustments (for TV, VIDEO input mode) 1 MENU ADJUST Press the MENU button to display the MENU screen and select ADJUST. CH Press to select PICTURE ADJUST. ACTION VOL SET UP PICTURE PICTURE ADJUST POSITION / SIZE AUDIO SOUND ADJUST VOL AUDIO MODE CH Press to display the PICTURE ADJUST screen. PAGE NORMAL is displayed at default. 2 NORMALIZE ACTION VOL SELECT PICTURE ADJ. Press to select the menu to adjust each item.
Picture Adjustments (for TV, VIDEO input mode) PICTURE Selects proper brightness and density for the room. PICTURE ADJ. NORMALIZE BRIGHTNESS Adjusts for easier viewing of dark pictures such as night scenes and hair. PICTURE MENU STANDARD PICTURE 0 BRIGHTNESS 0 COLOR Adjusts slightly to a lighter color. COLOR 0 TINT 0 TINT Adjust for nice skin color. SHARPNESS 0 COLOR TEMP SHARPNESS Displays a sharp image. ADJUST COOL SELECT EXIT COLOR TEMP (Color Temperature) classifying white light.
Picture Adjustments (PC input mode) 1 PC MENU Press the MENU button to display the MENU screen and select ADJUST. PICTURE PICTURE POS. / SIZE CH SOUND Press to select to PICTURE. SIGNAL ACTION VOL VOL SELECT EXIT CH Press to display the PICTURE screen. PICTURE NORMALIZE NORMAL PICTURE MENU PICTURE BRIGHTNESS COLOR TEMP NORMAL is displayed at default. 2 Press to select the menu to adjust.
SURROUND Controls SURROUND LIGHT POWER ASPECT MUTE TV/VIDEO AUX DVD R VC RC VR CBL DTV TV CH DB VOL ACTION VOL ON OFF TV, VIDEO INPUT MODE INFO/RECALL CH SURROUND NORMAL OFF TIMER VCR REC REW STOP TV/VCR VCR/DBS OPEN/CLOSE The surround setting switches on and off each time the SURROUND button is pressed. S MENU EXIT SURROUND Button The benefits of surround sound are enormous. You can be completely enveloped in sound, just as if you were at a concert hall or cinema.
Closed Captions This unit has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) CH MENU ADJUST SET UP LANGUAGE Press to select CLOSED CAPTION.
Closed Captions 3 CLOSED CAPTION CC MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. C3 MODE T1 CHANGE Press to select CC MODE. CH ON MUTE SELECT EXIT Press to select from the following: VOL ACTION VOL OFF C1 C2 T1 T2 CH T4 T3 C4 C3 • CAPTION OFF - Recommended mode when Closed Caption is not being used.
Lock Feature In the United States, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV PARENTAL GUIDELINES. Its function is to block programs by the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by the LOCK MENU options. Note: The V-CHIP. used in this unit model, is capable of selecting the U.S. ratings that are indicated in this manual.
Lock Feature 3 MOTION PICTURE RATING CH Press to select rating to lock. VOL ACTION VIEW NR PROGRAMS? NO YES G VOL PG PG–13 CH R Press to select YES or NO. CH NC–17 X VOL ACTION VOL CH Rating (turns red when on) G : General audience PG : Parental guidance suggested PG-13: Parental guidance needed under 13 years old R : Restricted NC17 : No one under 17 is admitted X : Pornography CHANGE SELECT EXIT EXIT Press to return to LOCK screen. 4 Setting MOTION PICT. STATUS.
Lock Feature TV PARENTAL STATUS LOCK Press to select TV PARENTAL STATUS. CH MOTION PICT. STATUS OFF ON CHANGE SETTING Press to select ON or OFF. ACTION VOL TV PARENTAL STATUS OFF ON VOL CHANGE SETTING CHANGE CODE CH CHANGE Changing setting CH Press to select CHANGING SETTING (the menu following TV PARENTAL STATUS). ACTION VOL SELECT EXIT VOL TV PARENTAL GUIDE VIEW NR PROGRAMS? NO YES SETTING DETAILED TV—Y CH Press to display the TV PARENTAL GUIDE screen.
Customizing the VIDEO INPUT labels Display for each VIDEO INPUT can be changed to match with the connected device (VCR, DVD Player). Example: When changing VIDEO 3 to LD. 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) Press to select VIDEO. ACTION SET UP LANGUAGE CH VOL MENU ADJUST PROGRAM CHANNELS LOCK CLOSED CAPTION VOL VIDEO CH Press to display the VIDEO screen.
Customizing the VIDEO INPUT labels 3 VIDEO INPUT LABEL CH Press to select VIDEO INPUT to change. VOL ACTION VIDEO1 VIDEO1 VIDEO2 VIDEO2 VIDEO3 VOL VIDEO3 COMPONENT1 COMPONENT1 COMPONENT2 COMPONENT2 CH CHANGE SELECT EXIT Press to change. CH VOL ACTION VOL CH CH TION CH VOL By pressing this button, display changes as follows: VIDEO 2 BLANK VCR HD VCR LD DTV DVD CH VOL ACTIO This button rotates in reverse. CH MENU Press to end.
Selecting STEREO / SAP / MONO Press the MENU button to display the MENU screen and select ADJUST. (Except in PC input mode) CH Press to select AUDIO MODE. VOL ACTION VOL MENU ADJUST SET UP PICTURE PICTURE ADJUST POSITION / SIZE AUDIO SOUND ADJUST AUDIO MODE CH Press to display the AUDIO MODE screen. PAGE ACTION SELECT EXIT Press to select STEREO / SAP / MONO.
Optimizing display for DVC recording mode (DVC PLAYBACK MODE) When digital video camera recording is in FRAME, images will have high resolution. 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) MENU ADJUST SET UP LANGUAGE CH Press to select VIDEO. PROGRAM CHANNELS LOCK VOL ACTION CLOSED CAPTION VOL VIDEO CH Press to display the VIDEO screen. CH PAGE ACTION VIDEO PAGE 1/3 Press to select DVC PLAYBACK MODE.
Adjusting unnatural video images (3D Y/C FILTER) Selecting the VIDEO menu Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) MENU ADJUST LANGUAGE CH PROGRAM CHANNELS Press to select VIDEO. VOL ACTION SET UP LOCK CLOSED CAPTION VOL VIDEO CH Press to display the VIDEO screen.
Automatically changing screen size for VIDEO INPUT modes If the received signal contains screen size specifications in VIDEO INPUT (1 – 3) or COMPONENT VIDEO INPUT (1 – 2), the screen size is automatically changed. 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) MENU ADJUST LANGUAGE CH PROGRAM CHANNELS Press to select VIDEO. VOL ACTION SET UP LOCK CLOSED CAPTION VOL VIDEO CH Press to display the VIDEO screen.
Cancelling automatic enlarging of screen Used for viewing 4:3 images in Panasonic auto mode. (See page 23) 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) MENU ADJUST LANGUAGE CH PROGRAM CHANNELS Press to select VIDEO. VOL ACTION SET UP LOCK CLOSED CAPTION VOL VIDEO CH Press to display the VIDEO screen.
Setting when 480p signals (sequential scan) are input through COMPONENT VIDEO INPUT Displays input signals (480p signals) in a natural color from digital equipment adapters connected to COMPONENT VIDEO INPUT (Y, Pb / Cb ,Pr / Cr input terminals). 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) MENU ADJUST SET UP LANGUAGE CH Press to select VIDEO. PROGRAM CHANNELS LOCK VOL ACTION VOL CLOSED CAPTION VIDEO CH Press to display the VIDEO screen.
Switching languages for display 1 Press the MENU button to display the MENU screen and select SETUP. (Except in PC input mode) MENU ADJUST SET UP LANGUAGE CH Press to select LANGUAGE. PROGRAM CHANNELS LOCK VOL ACTION VOL CLOSED CAPTION VIDEO CH 2 Press to display the LANGUAGE screen. Press to select preferred language. CH PAGE ACTION LANGUAGE LANGUAGE ENGLISH VOL ACTION SELECT EXIT VOL Français CHANGE EXIT CH MENU Press to end.
SET UP for PC Input Signals Press the MENU button to display the PC MENU screen, and select PC MENU. Press to select each item. CH Press to adjust. VOL ACTION VOL SIGNAL H&V SYNC NARROW PULL-IN RANGE CLAMP POSITION H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz CHANGE SELECT EXIT CH MENU Press to end. SYNC Setting PC sync signal setting: Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT). SYNC H&V SYNC ON G H&V: The H and V sync signals are input from the HD / VD connector.
Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The remote control can be preset for other manufactures, by utilizing the REMOTE MODE SELECTION BUTTONS for CABLE, DTV, VCR, RCVR (a Receiver or Amplifier), DVD (DVD, CD, LD) ,DBS and AUX (for Cassette Player or a VCR2.) (Details on remote control buttons to operate peripheral equipment See page 55 to 57 and 58 to 60) 1. Setting up the remote using the numerical keys.
Operating peripheral equipment using the remote control 2. Setting to the remote using the step and set method (When code not known): 1 Press and hold the POWER and ACTION keys simultaneously for three full seconds. After 3 seconds, all the illuminated mode keys will begin to flash. Then let go of the POWER and ACTION key.
Operating peripheral equipment using the remote control Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to page 56 and 57 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control.
Operating peripheral equipment using the remote control CABLE CONVERTER BOX AND DVD, CD, LD, PLAYERS Infrared Codes Index Maker List (CBL) Cable CBL Maker Set Up No. Maker Set Up No.
Operating peripheral equipment using the remote control CASSETTE PLAYERS, RECEIVERS, AMPLIFIERS, and DBS Infrared Codes Index Cassette Players Maker List (TAPE) Maker Set Up No. Maker Set Up No. PANASONIC 700, 730 TECHNICS 700, 730 AUX Receiver Amplifiers RC VR Maker List (RCVR) Maker Set Up No. Maker Set Up No.
Operating peripheral equipment using the remote control Remote Control: Quick Reference Functional Key Control KEY MODE TV, DTV, VCR AUX (VCR2) CABLE, DBS Select Channel RCVR (Receiver / Amplifier) 1 Selects Video 1 2 Selects Video 2 3 Selects Video 3 4 Selects Video 4 5 Selects CD 6 Selects Tuner 7 Selects Phone 8 Selects Tape 9 Selects AUX DVD (DVD, CD, LD) Selects Track Number TV Selects TV Input Mode ALL COMPONENTS Turns On and Off Select Components TV, VCR, DBS, DTV CABLE DVD RCVR (Receiver
Operating peripheral equipment using the remote control Remote Control: Quick Reference Functional Key Control KEY VOL MODE TV, VCR CABLE DBS DVD (DVD) DVD (CD) DVD (LD) RCVR TV Volume Up / Down Cable Volume Up / Down Audio Track + / –, Navigation Right / Left Navigation Right / Left RCVR Volume Up / Down TV Volume Up / Down RCVR Volume Up / Down TV CABLE DBS DVD (DVD) DVD (CD) DVD (LD) DTV AUX (Tape Cassette Player) Selects Previously Tuned Channel Selects Previously Tuned Channel Selects Previously T
Operating peripheral equipment using the remote control Remote Control: Quick Reference Functional Key Control KEY MODE PAUSE VCR DVD (DVD, LD) DVD (CD) AUX (Tape Cassette Player) VCR Pause Still Pause Tape Pause VCR DVD (DVD, CD, LD) AUX (Tape Cassette Player) TV/VCR Switch Open / Close Tape Open / Close ASPECT TV DBS DTV (STB) TV Aspect DBS Aspect STB Aspect CHANNEL VCR CABLE DBS DVD (DVD) DVD (CD) DVD (LD) RCVR VCR Channel Up TV Channel Up DBS Channel Up Slow + Repeat LD Side A Center + VCR/
Troubleshooting During normal broadcast (VHF / UHF) Symptoms Power does not turn ON. Checks • Is the power plug plugged in? • If the power does not turn on using the remote, check if this unit is turned on. Confirm that the Wide Plasma Display is connected to the rear • DISPLAY OUT terminal (D-SUB) of the tuner using the dedicated display cable. The tuner will not turn ON if connected using a different cable. Remote control does not function.
Specifications Power Source AC 120 V, 50 / 60 Hz Power Consumption Average Stand-by Power-OFF 35 W 6W 3.5 W OUTPUT DISPLAY OUT OUTPUT AUDIO OUT D-SUB 26-pin VIDEO (Pin Jack Type) S-VIDEO (Mini DIN 4-pin) AUDIO L-R (Pin Jack Type × 2) AUDIO L-R (Pin Jack Type × 2) 1.0 Vp-p (75 Ω) Y: 1 Vp-p (75 Ω) C: 0.286 Vp-p (75 Ω) 0.5 Vrms 0.5 Vrms VIDEO (Pin Jack Type) S-VIDEO (MINI DIN 4-pin) AUDIO L-R (Pin Jack Type × 2) Y PB / PR AUDIO L-R (Pin Jack Type × 2) D-SUB 15-pin M3 Type 1.
Customer’ Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
