Operating Instructions

8
Notes on Using Wired LA
N
U
se straight or crossover LAN cable that is compatible with category 5 or above
.
Whether strai
g
ht cable, crossover cable or both can be used varies dependin
g
on the s
y
stem confi
g
uration. For details,
¼
consult
y
our s
y
stem administrator.
When setting up the Display at a place, where electric statistic occurs o
f
ten, take a su
ff
icient anti-static measure be
f
ore
start us
i
ng
.
When the Display is used at a location, where static electricity occurs o
f
ten, such as on a carpet, communications o
f
¼
the DIGITAL LINK and the wired LAN are disconnected more often. In that case, remove static electricit
y
and the noise
source that ma
y
cause problems with an antistatic mat, and re-connect the DIGITAL LINK and the wired LAN.
In rare cases, the LAN connection is disabled due to static electricity or noise. In that case, turn o
ff
the power o
f
the
¼
Display and the connected devices once and then re-turn on the power.
C
onnect the DI
G
ITAL LINK and the LAN.
The Display may not work properly due to strong radiowave from the broadcast station or the radio.
If there is an
y
facilit
y
or equipment, which outputs stron
g
radiowave, near the installation location, set up the Displa
y
¼
at a location sufficientl
y
far from the source of the radiowave. Or, wrap the LAN cable connected to the DIGITAL LINK
terminal by using a piece o
f
metal
f
oil or a metal pipe, o
f
which is grounded at both ends
.