Operating instructions

52
FAQs, etc.
53
•
On screen messages
On screen messages
No Signal
•
Check the connection of the RF cable.
No Service
•
The station stops the services.
No recording - UNKNOWN REASON
•
The recording cannot be done by any reason. Check the equipment.
•
Disc or tape may be full.
No recording - Check Tape or Disc
•
The tape or disc may be “write protected”, missing or damaged.
The equipment may already be recording.
No module inserted
•
Check the CI module inserted completely (p. 27).
No DVB Service found
•
No DVB signal can be found in Auto Setup.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
•
There is a new software available.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profile and Childlock settings
•
There is a new DVB station.
Max. number of Timers already set !
•
Maximum timer programming event is 8.
Key not available
•
You cannot select the same input source between Main and Sub
screen when you are viewing in multi window. (p. 13)
Invalid system time. Please exit !
•
Cannot get the time information. Check the connection of the RF
cable.
Invalid DVB Channel
•
Invalid DVB channel is selected.
Feature not available
•
Check the Q-Link connection and setting (p. 40).
•
The impossible source (Component / HDMI / PC) to be record.
DOWNLOAD IN PROGRESS PLEASE WAIT
•
Q-Link channel download is in progress.
Bad Signal
•
The signal is weak. Check the aerial.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press Exit to return
•
Make sure the deleting programme event is with your desire.
Are you sure ?
•
Make sure the operation is with your desire.
All tuning data will be erased
•
“Shipping Condition” will erase all tuning data (p. 32).
•
“Auto Setup” will be erased all present DVB and Analogue tuning
datas (p. 30).
Message Meaning / Action Message Meaning / Action
Unable to download, Check Equipment
•
The tape or disc is active. Stop the equipment and try again.
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
Please wait.
•
A function is in progress.
Recording in progress
•
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
No stations found
Please insert the aerial
•
No analogue signal can be found in Auto Setup.
Timer already expired !
•
Starting time in Timer Programming is already past. Set correctly
(p. 37).
This service is locked !
Press OK to enter PIN
•
The selected channel is locked in Child Lock (p. 29).
Please check settings and connections on
HDMI devices.
•
Communication error in VIERA Link function (p. 42).
Shipping condition completed.
TV can now be switched off.
•
“Auto Setup” will automatically start when Mains power On / Off
switch is next turned On. (p. 10)
Software Update failed. Please try again later.
Press EXIT to continue
•
Perform “System Update Search Now” in System Update (p. 27).
If it is still failed, there may not be the new software.
Software successfully updated
Press EXIT to continue
•
The software updating is finished.
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Starting and Ending times in Timer Programming correctly
(p. 37).
Timer incorrect !
Timer overlap !
•
The timer programme events are overlapped. Cannot record other
channel at the same time. Check the Starting and Ending times in
Timer Programming (p. 37).
Tuner Locked
Please stop recording to operate
•
If you want to unlock, cancel Direct TV Recording (p. 40) or Timer
Programming (p. 36).
PIN incorrect !
•
The PIN number you entered is wrong.