Operation Manual

38
Picture Profi les
Once a profi le is locked, the following operations are restricted when the profi le is loaded.
Setting Editing the Profi le
(Memory edit)
Editing Picture Adjustment
Values via the Menu
(Picture menu, Advanced
settings)
Saving Picture Adjustment Values
(Memory save)
Off (unlocked) Allowed Allowed Allowed
Lock1 Prohibited Prohibited (picture adjustment
values are shown)
Allowed
Lock2 Prohibited Prohibited (picture adjustment
values are hidden)
Prohibited
Note:
Make a note of the new password to remember it.
Locking profi les
You can lock saved profi les to restrict operations when the profi les are loaded. You can also set passwords.
Notes:
• When the lock is set in “Extended life settings”, profi le cannot be locked.
• If profi le is locked, the menu operations of “Extended life settings” are restricted. (see page 49)
<Locking and unlocking profi les>
1
Display the menu screen.
2
Select “Options” and hold for 3 seconds or
more.
Setup
Pos. /Size
Sound
Options
Picture
2
access
(3 seconds
or more)
1
select
3
Select “Memory lock”.
OnOnscreen display
OffAll Aspect
ManualAuto Setup
OffStudio mode
3D settingsFunction button assign 1
INT3D Emitter
SignalFunction button assign 2
On3D Safety Precautions
Memory lock
2
access
1
select
4
Enter a 4-digit password.
The default password is
“0123”.
5
Select “Ok”.
Ok Cancel
Input password
1
select
2
set
6
Select the profi le and specify the desired lock
setting.
Lock1
Change password
MEMORY1
Off
Off
MEMORY2
MEMORY12
Offisf Mode
2
adjust
1
select
7
Exit the menu.
<Changing passwords>
1
Follow steps 1–5 in the previous procedure, <Locking
and unlocking profi les>.
2
Select “Change password”.
Lock1
Change password
MEMORY1
Off
OffMEMORY2
MEMORY12
Offisf Mode
2
access
1
select
3
Enter a new 4-digit password.
4
Select “Ok”.
Input new password
Ok Cancel
1
select
2
OK
5
Exit the menu.