(The ratings and appearance are subject to change without notice.) TH-85PF12U/K/W Dimensions (W x H x D) W 2,015 x H 1,195 x D 99 mm Package size W 2,194 x H 1,480 x D 549 mm Screen size Weight Power consumption 1899/1062/2167 mm PDP: 125 kg / With the package: Approx.
z Install the PDP in accordance with applicable laws and regulations of the destination country/region. z The installation work must be carried out only by professionals. z The power supply for this PDP must meet the requirements of the destination country. The rated power consumption is TBD. It is recommended that the PDP use a dedicated power line. z Provide adequate ventilation in the installation location so that the ambient temperature will not exceed 40°C.
(Subject to change without notice due to improvements of the product specifications and/or design.
(Subject to change without notice due to improvements of the product specifications and/or design.
z Stationary stand The height of the PDP bottom side is 62.5 mm from the stationary stand. The PDP can be set 50 mm higher to avoid interference between the PDP and the stand due to the attachment of a touch panel or for other reasons. At the higher position, the height of the PDP bottom side is 112.5 mm. To prevent the stand from tipping over, fix the stand to the table by four points using the supplied bands. In addition, fix the PDP to the wall by two points using strong wires.
z Stand specifications (Model No.: TY-ST85PF12) Dimensions: W 1,425 x H 1,413 to 1,606 x D 871 mm Weight: 75.0 kg Height adjustable to three levels A B 800 1,995 900 2,095 1,000 2,195 B A (Subject to change without notice due to improvements of the product specifications and/or design.
z Stand specifications (Model No.: TY-ST85P12) Dimensions: W 1,401 x H 727 x D 443 mm Weight: 55.0 kg (Subject to change without notice due to improvements of the product specifications and/or design.
Fixing the PDP to a wall or post with wires z Fixing with wire Wire ／ ／ * Each wire should be have a 4 mm or larger diameter and withstand 0.8 tons or higher load. * Each wire should be anchored to the wall with M10 x 45 mm or larger anchor bolts. Two wires should be anchored. Wire ／ ／ ／ z The installation work must meet applicable laws and regulations of the destination country/region.
z When installing the PDP on a wall, change the stand hook at the center to the upper stand hook position. z Stand specifications (Model No.: TY-WK85PV12) Dimensions: W 1,420 x H 1,071 x D 150 mm Weight: Approx. 25.0 kg z Wall mounting The installation work must be carried out only by professionals. The marks denote the center of the PDP. z Wall mounting dimensional tolerances Base bracket pitch (the part marked with *1): 1,230 ± 0.6 mm z Surface level difference tolerance: 1.
z Stand specifications (Model No.: TY-WK85PV12) Dimensions: W 1,420 x H 1,071 x D 150 mm Weight: Approx. 25.0 kg z When installing the PDP on a wall, change the stand hook at the center to the upper stand hook position. z Wall mounting The installation work must be carried out only by professionals. The marks denote the center of the PDP. z Wall mounting dimensional tolerances Base bracket pitch (the part marked with *1): 1,230 ± 0.6 mm z Surface level difference tolerance: 1.
z Be sure to put the brackets' stoppers in place to prevent the PDP from coming off the brackets for safety reasons. [Landscape installation] (1) After hanging the PDP on the wall mount brackets, remove the stopper screws, turn the stopper 180 degrees, and fasten it with the screws. Note) The brackets are designed to prevent the PDP from coming off, serve as an EMI protector, and facilitate PDP installation.
Unit: mm A B C D E 100 100 100 100 150 C B A D E
C Unit: mm A 100 B 100 C 100 D 100 E 150 A B D E
z The installation work must be carried out only by professionals. Panasonic assumes no responsibility for any problems resulting from faulty installation work. z Hang the bracket from the ceiling with four or more wires that can withstand a heavy load. In addition, attach two or more wires to prevent the ceiling mount bracket from hitting people nearby in case that the bracket falls off. Also attach bottom stay wires according to the installation conditions.
This This part part is is for for the safety wire. Do Donot notuse useit it for forthe thebottom bottom stay stay wire. wire. This part is for the safety wire. Do not use it for the bottom stay wire.
This This part part is is for for the safety wire. Do Donot notuse useit it for forthe thebottom bottom stay stay wire. wire. This part is for the safety wire. Do not use it for the bottom stay wire.
Unit: mm Base Plate 16 30
z Stand specifications (Model No.: TY-CE85PS12) Weight: Approx. 32.
z Stand specifications (Model No.: TY-CE85PS12) Weight: Approx. 32.
z If the wires used are long, recalculate the load by adding the weights of the wires. z Check with the builder (e.g. the construction JV) as to the strength of the section where the PDP is hung (e.g. steel frames, ceiling slab) to confirm that the section has adequate strength before starting the work. If the strength is not adequate, it is fully expected that the section cannot withstand the load only with external anchors.
Drawings and Earthquake Resistance Data (Reference)
z Position of the center of gravity TH-85PF12 With the wall mount bracket With the ceiling mount bracket (Tilt: 0 degrees) W (mm) 2,015 Å Å H (mm) 1,195 Å Å D (mm) 99 Å Å Weight (kg) 120 137 152 Position of the center of gravity G (mm) 33 51 45 * The weights and positions of the center of gravity shown above are provisional values currently available.
z When attaching the PDP to the mounting bracket, be sure to use our specified stand hooks. It is not recommendable to use any bracket other than the dedicated ones. The panel or other parts of the PDP may break, leading to screen defects or increasing of the noise emission level. z Be sure to put the brackets' stoppers in place to prevent the PDP from coming off the brackets for safety reasons.
z TH-85PF12 fan airflow and quantity 120-mm diameter: 1.8 m3/min x 4 92-mm diameter: 1.0 m3/min x 4 80-mm diameter: 0.7 m3/min x 2 * The heat vent area and the fan quantity and positions are subject to change.
z Finished package Total weight: 160 kg (PDP: 125 kg Packaging materials: 35 kg) Maximum number of stacks: 1 Bands 549 Carton body Top pad Top cushioning 1,480 Bottom cushioning (Product) Parts box Carton bottom Paper tubes 2,194 Bottom skids Bottom pallet Included items Power cord Hexagonal wrench Remote control M12 eye bolt x 1 Batteries Eye bolt cap x 1 Operating Instructions (Warranty card)
