The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma TV. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the model number and serial number of your set in the space provided on the back cover of these instructions.
Table of Contents Important Safety Instructions ....................................... 3 FCC STATEMENT ........................................................... 6 Safety Precautions ......................................................... 7 Cleaning and maintenance ........................................... 8 Installation ...................................................................... 9 Receiver Location ......................................................... 9 Optional External Equipment ....
FCC STATEMENT FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Precautions WARNING Set up Do not place the Plasma TV on sloped or unstable surfaces. The Plasma TV may fall off or tip over. • Do not place any objects on top of the Plasma TV. If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. • Do not cover the ventilation holes.
Safety Precautions CAUTION This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal ............................................................ TY-ST65-M • Speaker System ................................................ TY-SP65XVS30 • Wall-hanging bracket (Vertical) .
Installation Receiver Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
SAP LIGHT TV VCR DVD DBS RCVR CBL A -ANTENNA - B TV/VIDEO PECT AS B BE RE MU E LL CA T AUX CH OK VOL MENU CH 1 2 4 VOL EXIT 3 5 6 7 8 PIP MIN REW PLAY PIP MAX FF PAUSE STOP REC 9 SPLIT CH DVD/VCR CH SEARCH OPEN/CLOSE PROG 0 FREEZE TV/VCR PIP 10 SPLIT MOVE SWAP
Connection 1 2 11
Connection Connection to the display Cable In CableCARDTM CARD TOP (Turn Card upside down and gently insert it.) AUDIO DEDICATED DISPLAY OUT • For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. • When you enjoy terrestrial TV programs only, connect the home antenna to ANTENNA (A). • When you enjoy cable TV programs only, connect the cable TV’s cable to ANTENNA (A).
Connection AV Connection A ANTENNA SERVICE ONLY B DIGITAL AUDIO OUT CableCARDTM CARD TOP (Turn Card upside down and gently insert it.
Connection Digital TV - Set-Top Box (DTV-STB) or DVD Connection This TV is capable of displaying 480i, 1080i and 480p DTV signals when connected to a DTV Tuner Set-Top-Box (STB) or using the internal DTV Tuner. This TV also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures.
Connection Amplifier Connection For a full Home Theater sound experience, an external Dolby Digital∗ decoder and a multichannel amplifier must be connected to the DIGITAL AUDIO OUT terminal on the TV. ∗ Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer channel.
Connection HDMI Connection HDMI∗1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information. To the HDMI∗1 input terminal, you can connect an EIA/CEA-861/861B∗2 compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI output terminal.
Connection PC Connection INPUT 3 S VIDEO VIDEO PC L-AUDIO-R Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The maximum resolution: • • • • • If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.
Connection CableCARDTM Connection CableCARDTM allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable company on the availability of CableCARDTM. Procedure 1. Connect the cable antenna to ANTENNA (A). 2. Insert the CableCARDTM (as its front side facing down) into CableCARDTM slot on the back of the Receiver. 3. Turn the TV on (see page 19). 4. Set the input mode to TV (see page 20). Follow the messages displayed on the screen.
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug to digital media receiver. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 11) DISPLAY OUT Connecting the plug to the Wall Outlet Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green POWER Occasionally on-screen-menus appear while connection cable is not inserted, but these onscreen-menus are not effective.
Location of Controls SD CARD slot PC CARD slot DIGITAL MEDIA RECEIVER TU-PT700U PC CARD SD CARD INPUT 3 MENU OK TV/VIDEO VOLUME PC CHANNEL S VIDEO VIDEO L-AUDIO10-R POWER button PC CARD SD CARD PC CARD EJECT button MENU Display Main Menu or return one step backward in menus (see pages 24, 57). MENU OK TV/VIDEO OK Choose menu and submenu entry. VOLUME CHANNEL Channel selectors POWER SAP Volume adjusters TV/VIDEO Change the input mode. TV VCR DVD POWER Turn the TV ON or OFF.
Location of Controls SAP • Digital channel Select the audio track (if available). Audio Track 1 of 1 (English) • Analog channel Cycle through different audio modes. e.g. Stereo SAP Mono LIGHT Light the remote control buttons. The selected button blinks when lit. A -ANTENNA - B Switch to (A or B) RF antenna input. MUTE Mute the sound. Press again to cancel the mute. ASPECT Change the screen aspect (see page 56). BBE Turn BBE VIVA 3D OFF or ON (see page 29). RECALL Display or remove the channel banner.
First Time Setup For your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures displayed on-screen for setting up the features. You can also make the settings in Setup menu (see pages 36-38). POWER SAP Input Setup LIGHT TV VCR DVD DBS RCVR CBL A -ANTENNA - B TV/VIDEO PECT AS 1 Press to select Input Setup.
Watching TV programs CableCARDTM To enjoy cable TV programs, first insert the CableCARDTM (with its front side facing down) into CableCARDTM slot on the back of the Receiver. (see page 18) POWER SAP Note: If you enjoy terrestrial TV programs only, you don't need to insert the CableCARDTM. LIGHT TV VCR DVD DBS RCVR CBL PECT AS CH OK MENU Press to operate the TV set with the remote control.
Menu Navigation 1 MENU Press to display the Main menu. Timer (see page 33) SAP Setup (see page 36) LIGHT TV VCR DVD DBS RCVR CBL Lock (see page 42) AUX A -ANTENNA - B TV/VIDEO About The About screen displays assorted information about the TV. Please have this information when calling Customer Care Center. 2 Press to select the menu. CH VOL OK VOL CH 1 2 3 4 5 6 7 8 9 R-TUNE ex.
Menu Navigation [Channel / Setup] Press to select the menu. CH VOL OK VOL Press to enter the submenu field. CH Proceed to adjustment and setting. [Lock] Password Enter password and repeat step 2. Enter Password ---- Proceed to adjustment and setting. To return to the previous screen MENU Press to return. To exit menu EXIT Press to return to normal picture.
Menu Navigation Picture Press the MENU key to activate the main menu and select Picture. (refer to page 24) Picture Pic Mode Vivid Color 31 Tint 31 Brightness 26 Picture 63 Sharpness 50 Normal No Other Adjust Pic Mode Lets you choose the pre-set picture modes that best suits the program you are viewing. This feature also affects Color Temp setting (see page 27). Press to select Pic Mode. CH VOL OK VOL CH Press to select the picture mode.
Menu Navigation Color Temp (temperature) / Color Mng. / Video NR / 3D Y/C Filter Press to select the sub-menu. CH VOL OK VOL Press to adjust or activate the sub-menu. CH Item Color Temp (Temperature) Explanations Select Normal, Warm (red) or Cool (blue) colors to suit personal preferences. Color Mng. (Color Management) Color Mng. On Enable vivid color adjustment automatically. Video NR Reduces noise in the channel, commonly called snow. Remains off when receiving a strong signal.
Menu Navigation Audio Press the MENU key to activate the main menu and select Audio. (refer to page 24) Audio Bass 7 7 Treble 31 Balance Normal Set Other Adjust Bass / Treble / Balance / Normal Press to select the sub-menu. CH VOL OK Press to adjust or activate the sub-menu. VOL Item CH Explanations Bass Increase or decrease the bass response. Treble Increase or decrease the treble response. Balance Emphasize the left / right speaker volume.
Menu Navigation BBE VIVA 3D / BBE BBE VIVA 3D BBE BBE VIVA 3D provides a musically accurate natural 3D image with hi-fi sound. The clarity of the sound is improved by BBE while the width, depth and height of the sound image are expanded by BBE’s proprietary 3D sound processing. BBE VIVA 3D is compatible with all TV programs including news, music, dramas, movies and sports as well as electronic games. BBE VIVA 3D enhances the surround sound effect, while maintaining the clarity of dialogue.
Menu Navigation Channel Press the MENU key to activate the main menu and select Channel. (refer to page 24) Press to select the menu. CH VOL OK Press to display the sub-menu. VOL CH Favorite Allows you to create Favorite channel list from Antenna (A) or Antenna (B). Favorite Surf Mode Press to select Surf Mode. CH VOL OK Press to select Favorites or All Channels. Surf Mode All Channels RF Input Antenna (A) Channel A: 2 The maximum is 16 favorite channels.
Menu Navigation Captions To enter preset and manual labels to desired stations. Also to enter input label to video inputs. Preset Labels Captions To enter channel numbers for popular TV stations. Press to select Preset Labels. 1 OK Antenna (A) FOX NBC PBS CH VOL Preset Labels RF Input Manual Labels ABC Input Labels CBS CNN VOL Press to enter the sub-menu field. CH ESPN HBO Press to select RF Input. 2 CH VOL OK Press to select Antenna (A) or Antenna (B). VOL Press to enter your selection.
1 Press to select Manual Labels. Captions Preset Labels RF Input CH VOL OK Press to enter the sub-menu field. VOL Manual Labels Channel Input Labels Caption Antenna (A) A: 2 CH Press to select RF Input. 2 Press to select Antenna (A) or Antenna (B). Press to enter your selection. Press to select Channel. 3 CH VOL OK Press to select the available channel number. VOL CH Press to select Caption. 4 CH VOL OK VOL CH 5 Press to select the character position.
Menu Navigation Input Labels To label video input connections for on-screen display. 1 Press to select Input Labels. Captions Preset Labels Component 1 CH VOL OK Press to enter the sub-menu field. Manual Labels Component 2 Input Labels HDMI Video 1 VOL SKIP Video 2 CH Video 3 PC 2 Press to select the video input. CH VOL OK VOL CH Press to select the preset input label. • To delete Input labels, press until no label is displayed, and then press OK button to enter your selection.
Menu Navigation Timer Select timer to turn the TV on and off at selected times and on selected day. Press to select Timer. Timer Sleep CH VOL OK Press to enter the Timer sub-menu. Clock Set VOL No Timer Day Set --:-- ---- CH Day Timer Press to select Day. CH VOL OK VOL Press to select appropriate day setting. Day MON-FRI On Time 7 : 10 AM Off Time 8 : 10 PM Set Yes CH On Time / Off Time Press to select On Time or Off Time. 1 CH VOL OK Press to enter the time field.
Menu Navigation Sleep Press to select Sleep. Sleep CH VOL OK Timer VOL CH Press to select the desired sleep time (No, 30, 60 or 90). • To turn off the timer, select No. • To confirm the remaining time, press RECALL button (see page 21). No Timer Clock Set Day Set --:-- ---- To return to the previous screen MENU Press to return. To activate Timer Select the channel and turn off the TV.
Menu Navigation Setup Press the MENU key to activate the main menu and select Setup. (refer to page 24) Press to select the menu. CH VOL Press to display the sub-menu. OK VOL CH Program CH Input Setup Lets you specify the antenna mode (Cable only, Cable/Antenna or Antenna only). 1 Press to select Input Setup. CH Press to enter the sub-menu field.
Menu Navigation Auto Scan Automatically scans all available channels, Antenna (A) Analog, Antenna (A) Analog & Digital, Antenna (B) Analog and Antenna (B) Analog & Digital. 1 Press to select Auto Scan. Program Channel CH VOL OK Press to enter the sub-menu field. VOL Input Setup Scan All Auto Scan Antenna (A) Analog Manual Program Antenna (A) Analog & Digital CH Signal Meter Language 2 Antenna (B) Analog Antenna (B) Analog & Digital Press to select the sub-menu.
Menu Navigation Signal Meter (For digital channels only) Displays the signal strength of the ATSC digital channel in either Antenna (A) or Antenna (B). 1 Press to select Signal Meter. CH VOL OK Press to enter the sub-menu field. Program Channel Input Setup Auto Scan RF Input Channel Antenna (B) B: 26-3 VOL Manual Program CH Signal Meter Language 2 CH VOL OK Signal Strength : 96% Peak : 96% Press to select the channel. VOL Press to display the Signal Strength.
Menu Navigation Closed Caption The television includes a built-in decoder that is capable or providing a visual display of the audio portion. The program viewed must provide Closed Captioning (CC) for the television to display it. CC Mode Closed Caption Activates Closed Captioning when the MUTE button is pressed. CC Mode Setting Off Analog 1 Press to select CC Mode. CH VOL OK Digital Press to enter the sub-menu field. VOL CH 2 CH VOL OK VOL CH Press to select the setting.
Menu Navigation Digital The Digital Closed Caption menu lets you configure the way you choose to view the digital captioning. 1 Press to select Digital. CH VOL OK Press to enter the sub-menu field. Closed Caption CC Mode Service Primary Analog Font Size Automatic Automatic Style Automatic Digital VOL Colors CH Reset 2 [Service / Font / Size / Style] Press to select the sub-menu. CH VOL OK Sample CC Text Press to select the setting.
Menu Navigation Other Adjust 1 Press to select Other Adj. CH VOL OK Press to display the sub-menu. VOL CH Press to select the sub-menu. 2 CH VOL OK Press to select or activate the sub-menu. VOL Other Adjust Side Bar Bright Power Save Off Input Skip Off CH Side Bar (Off, Dark, Mid, Bright) Displaying a picture in 4:3 mode for an extended period may cause an after-image. Change the brightness of the side bars to reduce the risk of after-image.
Lock Create a 4-digit password to enter the Lock menu. Password New Password 1 2 3 4 5 6 7 8 9 0 ---- Enter a 4-digit password. After entering your password for the first time, “New Password” will change to “Enter Password”. Notes: • Use a code that is easy to remember and record it in a safe place. • If Always is selected in How Long? (see page 45) and you forget your secret code, the TV must be serviced by a qualified technician to clear the Lock setup.
Menu Navigation Channel Lock RF Input Select either Antenna (A) or Antenna (B). Channel Lock RF Input Press to select RF Input. 1 OK A: 2 The maximum is 4 locked channels. CH VOL Antenna (A) Channel VOL CH 2 CH VOL OK Press to select the setting. VOL Press to enter your selection. CH Channel Select up to four (4) channels to be blocked out. These channels will be blocked out regardless of the program rating. Press to select Channel.
Menu Navigation U.S. MOVIES RATINGS CHART NR G PG PG-13 R NC-17 X CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie been rated or rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. RESTRICTED. Under 17 requires accompanying parent or adult guardian. NO ONE 17 AND UNDER ADMITTED. ADULTS ONLY. U.S.
Menu Navigation CANADIAN FRENCH RATINGS CHART E Exempt - Exempt programming. General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately. 8+ General - Not recommended for young children. Programming intended for a broad audience but contains light or occasional violence. Adult supervision recommended.
Photo Viewer Photo Viewer lets you display JPEG images recorded by digital camera on SD card or other types of memory card when it is inserted in the proper card slot.
Photo Viewer Folders and Files • Photo Viewer can only show still images recorded by a digital still camera with DCF∗ and EXIF standard JPEG file. ∗DCF (Design rule for Camera File system) Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA). • Memory cards must be formatted with FAT12 or FAT16 in order to be viewed on TV. If the card is not formatted, it may cause incompatibility with certain memory card adapters.
Photo Viewer Thumbnail Mode The thumbnail screen is the initial entry screen from the main menu. • When both SD card and PCMCIA card are inserted, the TV plays SD card. To play a PCMCIA card, select “PC” in “Card” (see page 50) after inserting the PCMCIA card. 1 Insert the card into the appropriate slot (see page 46). OR POWER Press to display the thumbnail screen.
Photo Viewer Photo Viewer Setup Menu This menu allows you to customize features in the Photo Viewer Setup Menu. While in the thumbnail mode or the single picture view mode (see page 48) 1 Press to display the Setup Menu screen. 2 Press to select the sub-menu. CH VOL OK Press to adjust or activate the sub-menu.
Photo Viewer Rotate To access menu see page 49. Allows you to rotate the image (see also page 48). Press to select Rotate. CH VOL OK Press to select Left or Right. VOL CH Press to activate the setting. Zoom To access menu see page 49. (While in the single picture view mode only) Lets you select the magnification of the single picture display. Press to select Zoom. 1 CH VOL OK Press to select To Fit, x2 or x4. VOL CH Press to activate the setting. 2 Press to move the image in the picture frame.
Photo Viewer Photo Viewer Troubleshooting Symptom Cause and remedy Page 47 Cannot read the content of the card. • Incompatible format. Must be formatted with FAT 12 or FAT 16. • The extension is not “JPG”. • The folders not under DCF standard. PC card cannot be ejected. Push the card all the way in, and eject. 46 Poor picture quality. If the main image cannot be read (the file is partially corrupted), the Photo Viewer will read the thumbnail. Please confirm the format of the image.
PIP (Picture in Picture) Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. PIP 1 Press to display the PIP frame. POWER Main picture SAP LIGHT TV VCR DVD DBS RCVR CBL AUX Notes: • Audio is from Main picture only.
PIP (Picture in Picture) Operation To freeze the picture PIP frame FREEZE TV/VCR • Press again to cancel Freeze. Main Picture While PIP frame is not displayed FREEZE TV/VCR • Select PIP or Split (see page 27, Freeze) when freezing the Main picture. Notes: • Freeze is canceled after 3 minutes. • Only MOVE (see below) is active while the Main picture is frozen. To select the input mode of PIP frame TV/VIDEO CH # Comp 1 Video 3 Comp 2 Video 2 HDMI Video 1 The input mode changes in PIP frame.
SPLIT Operation This feature lets you watch two different channels side by side with or without an external video source. SPLIT 1 Press to display the SPLIT frame. POWER Main picture SAP SPLIT frame (The previously selected screen appears.) LIGHT TV VCR DVD DBS RCVR CBL Notes: • Audio is from Main picture only. • SPLIT frame displays analog channel signal of ANTENNA (A) only, and cannot display ANTENNA (B) or digital channel signal.
SPLIT Operation To freeze the picture SPLIT frame FREEZE TV/VCR • Press again to cancel Freeze. Main Picture While SPLIT frame is not displayed FREEZE TV/VCR • Select PIP or Split (see page 27, Freeze) when freezing the Main picture. Note: • Freeze is canceled after 3 minutes. To select the input mode of SPLIT frame TV/VIDEO CH10 CH # Comp 1 Video 3 Comp 2 Video 2 HDMI Video 1 The input mode changes in SPLIT frame.
Aspect Controls Lets you choose the aspect depending on the format of the received signal and your preference. PECT AS Press to change the aspect mode. POWER SAP Note: The available aspect modes depend on the receiving signal.
PC MENU Preparation: • Connect a PC to the TV (see page 17). • Select PC input mode (see page 20). POWER SAP LIGHT TV VCR DVD DBS RCVR CBL PICTURE PICTURE POS./SIZE SOUND SIGNAL MENU 1 Press to display the PC MENU. Press to select the sub-menu. 2 Press to display the sub-menu screen. CH AUX VOL A -ANTENNA - B TV/VIDEO PC MENU OK VOL CH BBE RE E LL CA MU T PECT AS CH VOL MENU OK 3 Press to select the sub sub-menu. CH VOL CH VOL OK Press to adjust the sub sub-menu.
PC MENU PICTURE POS./SIZE (To access menu see page 57.) Note: If a “Cue” or “Rew” signal from a VCR or may DVD player is received, the picture position may shift up or down despite of the PICTURE POS./SIZE settings. Select “NORMALIZE” to reset adjustments to the factory default setting. Note: • You can select “NORMALIZE” when you change the settings. Adjust the horizontal position. H-SIZE NORMALIZE NORMAL H-POS H-SIZE V-POS V-SIZE CLOCK PHASE NORMALIZE H-POS PICTURE POS.
Operating peripheral equipment Programming the remote control code You can operate other manufacturers’ components using this TV’s remote control. Preparation: Connect the plug of the external component to the wall outlet. Make sure the component is turned off. • • 1 POWER CH + POWER VOL OK VOL SAP CH Press and hold POWER and OK together, for at least 5 seconds. The mode selection buttons flashes, and then release the POWER and OK.
Operating peripheral equipment Infrared Code Index The remote control is capable of operating many brands of peripheral equipment. Refer to page 59 for programming procedures. Notes: • The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. • After entering the proper infrared code, press the desired Mode Selection buttons (see page 20).
Operating peripheral equipment Codes for DVD DVD Brand Denon Ferguson JVC Mitsubishi Nordmende Panasonic Philips Pioneer RCA Code 100 101 109 105 101 100 103 102 101 Brand Saba Samsung Sharp Sony Technics Thomson Toshiba Yamaha Zenith 101 110 108 104 100 101 103 100 107 Code Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sanyo Scott Sharp Sherwood Sony Soundesign Teac Technics Victor Yamaha Code 208, 218, 220, 222 224, 225, 227 229, 230 208 224, 225, 227 231, 237, 238, 247 210, 246 205 210
Operating peripheral equipment Codes for Receivers RCVR Brand Admiral Aiwa Denon Fisher Garrard Harman Kardon Jensen JVC Kenwood Magnavox Marantz Mclntosh Nakamichi Onkyo Code 120 125, 126 134, 135, 136 104 113 115, 123 129 132, 133 100, 108 127 124 116 106 109, 114 Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sharp Sony Soundesign Teac Technics Victor Yamaha Code 103, 127, 130, 131 118, 119, 121 123 105, 107 118, 119, 121 103, 105, 127, 130, 131 103, 111, 139 134, 137 122 138 111, 112, 113
Operating peripheral equipment Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode, DTV, CABLE, DBS, VCR, DVD ...etc. KEY NAME DTV MODE CABLE MODE DBS MODE POWER POWER POWER NAVIGATION UP/DOWN CABLE CHANNEL UP/DOWN DBS NAVIGATION UP/DOWN OK - DBS MENU NAVIGATION RIGHT/LEFT - DBS NAVIGATION RIGHT/LEFT DTV MENU - - PROGRAM INFO. - DBS PROGRAM INFO.
Operating peripheral equipment KEY NAME VCR MODE DVD/CD MODE (DVD) (CD) (PVR) AUX MODE (VCR2) (TAPE) RCVR MODE MU T POWER E TV/VIDEO LIGHT POWER POWER POWER POWER POWER POWER POWER - - - - - - RCVR MUTE TV INPUT SW - - - TV INPUT SW - RCVR INPUT SW - - - - - - REMOTE BUTTONS - NAVIGATION UP/DOWN NEXT/PREVIOUS TRACK NAVIGATION UP/DOWN - - TUNER +/- - - - - - - - - - - NAVIGATION RIGHT/LEFT - VOLUME +/- RCVR VOLUME +/- - - - PVR MENU - - - TI
Troubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions. Symptoms VIDEO AUDIO Solutions Page Snowy Video Noisy Audio • Adjust the antenna location and connection. 12, 13 Multiple Image Noisy Audio • Adjust the antenna location and connection. • Check the antenna lead-in cable. 12, 13 12, 13 Interference Noisy Audio • Move the television away from electrical appliances, lights, vehicles and medical equipment. • Increase volume. • Check Mute.
Troubleshooting Chart Symptoms Some parts of the screen do not light up. An after-image appears Whirring sounds can be heard from the display unit.
Specifications Digital Media Receiver Power Source Power Consumption Maximum Stand-by condition Dimensions (W × H × D) Mass (weight) Channel Capability-ATSC / NTSC FEATURES TU-PT700U 120 V AC, 60 Hz Two screen display functions BBE VIVA 3D CLOSED CAPTION 3D Y/C FILTER CableCARDTM slot AC cord Display-Receiver cable Accessories Supplied Operating condition Temperature Humidity Connection terminals RGB input AV INPUT 1- 3 AV PROG.
By using this TV you are indicating acceptance of the GNU Public Licenses indicated below. This product utilizes the following so called “open source” software: (1) the software which is licensed under the GNU GENERAL PUBLIC LICENSE, (2) the software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE, and (3) software developed by the third parties and available under certain terms and conditions.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.
libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
VIDEO/COMPONENT/RGB/PC/HDMI input signals VIDEO input signal name 1 NTSC horizontal frequency(kHz) 15.73 vertical frequency(Hz) 59.94 DIGITAL AUDIO OUT Applicable input signals (∗ mark) horizontal vertical frequency(kHz) frequency(Hz) COMPONENT PC HDMI 525 (480) /60i 15.73 59.94 ∗ ∗ ∗ 525 (480) /60p 31.47 59.94 ∗ ∗ ∗ 750 (720) /60p 45.00 60.00 ∗ 1,125 (1,080) /60i 33.75 59.94 ∗ ∗ ∗ 640 × 400 @70 31.47 70.00 ∗ 640 × 480 @60 31.47 59.94 ∗ Macintosh 13” (640 × 480) 35.00 66.67 ∗ 640 × 480 @75 37.50 75.
