Specifications

Conference systems utilized together with projectors.
8
9
Numerous Image Display Functions and Utilities Enhance
the Power of the Large-Screen Display
PJLink
TM
*
1
-Compatible Network Function for Remote Control
This network function lets you operate displays by remote control and monitor their status through a
LAN connection. Since it supports the "PJLink
TM
*
1
Class 1" industry standard, existing infrastructure
can be used for effective plasma display operation. You can also control the display from a web
browser*
2
, making it even easier to use.
The network function also uses the same protocol as Panasonic projectors, so other video devices
can be combined to upgrade the system.
*1:Unified standards for a telecommunications protocol for operating and managing multiple projectors.
*2: PF20 Series only.
•When using the network function, be sure to set "Control I/F Select" in "Network Setup" to "LAN."
STB VCR DVD PC
Horizontal content is divided into
three segments.
Desired segments are
displayed full-screen in
portrait mode.
No restriction on input sources
• Multi AI Control Function
By applying AI control to the brightness signal of the entire input signal
using the same video processing as for a single-screen image, this
function achieves a uniform brightness level over the entire image.
• Display ID Control
To prevent remote control errors that can occur when multiple displays
are installed in close proximity, each display in a multi-screen system
must have a unique ID. Assigning a display ID assures reliable remote
control operation.
*The optional ID Remote Control Unit (EUR7636070R) is required for the
TH-65PF20/58PF20/50PF20/42PF20/42PH20.
1x
2x
3x
4x
5x
1x
2x
3x
4x
5x
TULIP
Images can be enlarged in 24 different ways
• Power-On Delay Function
This function automatically shifts the power-on time slightly for each
display unit in the system, so there's less load on the power supply.
• Seam Hides Video Mode
When this mode is off, a full-screen image, including edges (the
entire width of the bezel) of the display panel is displayed. This is
especially suitable for
displaying text information,
since no words are hidden by
the bezel.
Effective Functions Used with Portrait Zoom or Multi Display
Portrait Zoom Function Enlarges
Horizontal Images for Vertical Display
By dividing horizontal content into three vertical segments,
the Portrait Zoom function can dynamically display selected
segments. Then, by grouping three 103-inch or 85-inch
plasma displays together in portrait mode, a dynamic
multi-display can be configured to display life-size people
with almost the same field of view as the original content.
* Some degradation occurs when images are enlarged.
Multi-Display Dynamically Displays
Images in Large Spaces
The Multi-Display function enlarges images up to five times
their original size, both vertically and horizontally. It
enlarges images by the same zoom ratio in both vertical
and horizontal directions, such as 2x2, 3x3, 4x4 and 5x5, or
by different ratios in order to effectively use vertically or
horizontally elongated spaces. Plasma display versatility
can be further enhanced by freely selecting the zoom ratio
to match the installation space.
•Some degradation occurs when images are enlarged.
•Provide an appropriate air-conditioned environment because the ambient temperature
varies depending on the installation condition and location.
1x1 1x2 1x3 1x4 1x5
2x1 2x2 2x3 2x4 2x5
3x1 3x2 3x3 3x4 3x5
4x1 4x2 4x3 4x44x4 4x5
5x1 5x2 5x3 5x4 5x5
1x1 1x2 1x3 1x4 1x5
2x1 2x2 2x3 2x4 2x5
3x1 3x2 3x3 3x4 3x5
4x1 4x2 4x3 4x5
5x1 5x2 5x3 5x4 5x5
Control room
Conference room, entrance hall, etc.
Network
Easy
Operation
from a Web
Browser
ON OFF