Specifications

Wireless Card (A protective cover is included for wireless card use.)
Up to four PCs can be used.
Note
Normal operation may not be possible when the board is combined with
another application (such as an image rotating utility) using the image data.
This board cannot be used in some countries.
12
13
* Does not support the DPMS function.
RCA Composite Video
TY-42TM6V
• S-Video or Composite in/out (RCA)
• Audio L/R (RCA)
PC Input
TY-42TM6P
RGB (HV)/component video
(D-Sub 15-pin)
Audio L/R (M3 jack)
SDI
TY-FB7SD
• SD-SDI input and output (BNC)
HD-SDI
TY-FB9HD
• HD-SDI input and output (BNC)
SCART
TY-FB8SC
RGB/S-Video/Composite (SCART 21-pin)
Audio L/R (SCART 21-pin)
Composite/Component Video
TY-42TM6Y
• RGB (HV)/component video (BNC)
• S-Video or Composite in/out (BNC)
• 2 x Audio L/R (RCA)
RGB Active Through
TY-42TM6G
RGB (HV)/component video
(D-Sub HD 15-pin)
RS-232C (D-Sub 9-pin)
BNC Dual Video
TY-FB9BD
• S-Video and Composite (BNC)
• 2 x Audio L/R (RCA)
DVI-D
TY-FB11DD
• DVI-D IN
• Audio L/R (M3 jack)
• HDCP compatible
Dual HDMI
TY-FB10HMD
• 2 x HDMI IN
• HDCP compatible
HD-SDI with Audio
TY-FB10HD
HD-SDI video/audio input and
output (BNC)
BNC Component Video
TY-42TM6A
• RGB/component video (BNC)
• Audio L/R (RCA)
RCA Component Video
TY-42TM6Z
• RGB/component video (RCA)
• Audio L/R (RCA-cinch)
BNC Composite Video
TY-42TM6B
• S-Video or Composite in/out (BNC)
• Audio L/R (RCA)
Max Transimission Distance/Recommended Cable
100 m*/75-ohm coaxial cable 5C-FB
* When using a cable with less than 20dB/100 m (750 MHz)
Dual Link HD-SDI Board
TY-FB11DHD
• Supports the high-resolution, high-quality Dual Link HD-SDI (in compliance
with SMPTE372M) and the HD-SDI (in compliance with SMPTE292M) used
in broadcasting.
• Allows direct input of 2K digital cinema signals* in compliance with DCI (Digital
Cinema Initiatives) without using a converter.
* Compatible with RGB 4:4:4/YPBPR 4:2:2@60p, 50p/2K digital cinema signals in compliance with DCI.
• Provides simultaneous video and embedded audio (max. 16 channels)* signal
transmission using a single cable.
* Only when signals are multiplexed in Dual Link HD-SDI Link A.
Dual B
In
Dual A/
HD-SDI
In
Dual A/
HD-SDI
Out
Dual B
Out
Optional Terminal Boards
PF20/PH20 Series PF12 Series
List of Compatible Terminal Boards
TH-103PF12
TH-85PF12
TH-65PF20
TH-58PF20
TH-50PF20
TH-42PF20
TH-42PH20
TY-42TM6A
TY-42TM6Z
TY-42TM6B
TY-42TM6V
TY-FB9BD
TY-FB11DD
TY-FB10HMD
TY-FB7SD
TY-FB9HD
TY-FB10HD
TY-FB11DHD
TY-42TM6Y
TY-42TM6G
TY-FB8SC
TY-FB10WPE
MPL3222
WK-0100 series
XTX series
TY-42TM6P
: Compatible
System Configuration Required by Wireless Manager software
Windows Macintosh*
1
OS
Microsoft Windows 2000 Professional/XP Home Edition/XP Professional Mac OS X v10.4
Microsoft Windows Vista™ Ultimate 32 bit*
1
/Vista™ Business 32 bit*
1
Mac OS X v10.5*
2
Microsoft Windows Vista™ Home Premium 32 bit*
1
/Vista™ Home Basic 32 bit*
1
CPU
Intel Pentium III 600 MHz or faster (or compatible processor) Power PC G4 800 MHz or faster, or Intel Core processor 1.8 GHz or faster
(Processing speed of 800 MHz or faster recommended for Live mode)
Memory
256 MB or more 256 MB or more (Recommended 512MB or more)
HDD
60 MB or more of available disk space
Required hardware
• CD or DVD drive (for installing software and browsing the instruction manual)
• LAN terminal (10BASE-T/100BASE-TX/1000BASE-T)
• A correctly operating wireless LAN function supporting IEEE 802.11b/g, however, there are some cases where the device dose not receive
802.11g signal, though the wireless LAN supports 802.11b/g.
Web browser
Microsoft Internet Explorer 6.0 or newer Safari 2.0 or newer
Netscape Communicator 7.0 or newer
*1: Only supported by Wireless Manager ME4.5.
*2: The device can only used with Intel MacBook or MacBook Pro equipped with Core 2 Duo processor.
Note: • Usable functions are limited when operating under Windows Vista or MAC OS.
• Microsoft, Windows and PowerPoint are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
• Intel and Pntium are either trademarks of registered trademarks of Intel Corporation in the United States and/or other countries.
• Visit the website for more details on wireless manager software. http://panasonic.net/proplasma
New "Slot 2.0" Function Slot Expands Display Applications
Video input
LAN
(only PF20)
Component input HDMI input DVI-D input
Speaker out
(L, R)
PC input Serial Control
New “Slot 2.0” Function Slot
The new "Slot 2.0" function slot lets you add
display functions to match the intended use. Mounting an optional
function board allows the display to support a variety of applications.
Multi-Function Slots Offer Outstanding Flexibility
In addition to the fixed input interface, the PF12 Series models have
three interchangeable slots that permit you add different combinations
of optional terminal boards. This gives you the flexibility to add digital
or analogue capabilities and customize your system.
Versatile Video Inputs with Multiple Digital, Analogue
Connections
The PF20 and PH20 Series are equipped with full range of video
input terminals, so you can input both analogue (Component Video,
Video, PC) and digital (DVI-D, HDMI) video signals to the display.
These standard-equipped terminals handle most of the commonly
used video signals.
Wireless Presentation Board
TY-FB10WPE
• Wireless connection (IEEE 802.11b/11g) eliminates the need to
connect any cables between the display and a PC.
• High-speed wireless transmission produces smooth-motion
images.
• Images from one PC can be displayed in real-time on as many
as eight displays simultaneously.
• Images from up to 16 PCs can be simultaneously displayed
onto a single screen.
• Plasma displays can be controlled using a Web browser.
• Wireless card
• RGB/component video (RCA)
• Audio L/R (RCA)
Slot 1 Slot 2
Slot 1 Slot 2
Slot 1 Slot 2
Slot 1 Slot 2
Slot 1 Slot 2
Slot 1 Slot 2
Slot 1 Slot 2
Slot 1 Slot 2 Slot 3
Slot 1
Slot 1 & 2
Slot 1 & 2
Slot 2 & 3
Slot 2
Slot 1 Slot 2 Slot 3
Slot 1 Slot 2
Slot 1 Slot 2
Slot 3
Slot 1 Slot 2
Slot 1 & 2 Slot 2 & 3
*Does not support the Power
Management function.
Compatible Video Signal
Signal format Sampling structure/Number of pixel bits SDI name
750 (720)/60p: 59.94p
750 (720)/50p
1,125 (1,080)/60i: 59.94i
1,125 (1,080)/50i YC
BCR (4:2:2)/10-bit HD-SDI
1,125 (1,080)/30p: 29.97p
1,125 (1,080)/25p
1,125 (1,080)/24p: 23.985p
1,125 (1,080)/24sF: 23.985sF
1,125 (1,080)/60i: 59.94i
1,125 (1,080)/50i
RGB (4:4:4), RGB + A (4:4:4:4)
*1
/10-bit
1,125 (1,080)/30p: 29.97p
YC
BCR (4:4:4), YCBCR + A (4:4:4:4)
*1
/10-bit
1,125 (1,080)/25p
RGB (4:4:4), YC
BCR (4:2:2), YCBCR (4:4:4)/12-bit
*2
1,125 (1,080)/24p: 23.985p Dual-Link
1,125 (1,080)/24sF: 23.985sF HD-SDI
1,125 (1,080)/60p
YC
BCR (4:2:2)/10-bit
1,125 (1,080)/50p
2,048 x 1,080/24p: 23.985p
2,048 x 1,080/24sF: 23.985sF
RGB (4:4:4), X´Y´Z´ (4:4:4)/12-bit
*2
*1: A (Alpha channel) is not supported. This data cannot be output.
*2: A 12-bit signal can be received, but it will be converted to a 10-bit signal for the display of images.
DVI-D IN AUDIO IN
AUDIO
IN
AUDIO
IN
LAN
COMPONENT IN
PC IN SERIAL AUDIO OUT
Slot 1 Slot 2 Slot 3
Fixed terminals