Operating Guide

11
Touch Panel Setup
Explanation of Setup Panel Items
■
When the UPDD Driver software is started up, the UPDD console screen appears.
Adjusts the touch panel controller.
Specifi es a touch mode of the
touch panel. (p. 14)
Adjusts response rate and
other items of the touch panel.
(Changing is not required for the
current settings as they are already
adjusted.)
Sets the default settings of the
calibration function. (Changing
is not required for the settings as
they are already set.)
Starts up a tool for touch panel
condition display and operation
test.
Sets the default settings for the touch
position at setup. (p. 15)
Closes the window.
Displays the description (Help) of functions.
Displays the management information of the touch panel hardware and software.
(Not used for touch panel operation settings.)
Sets multi screen settings.
Reconnects USB port. Used when an error occurs;
ex. when the touch panel is not recognized.
Displays the menu to set “Coarse sensitivity” and
“Threshold”. (p. 12 and 13)
Adds or deletes displays when multiple touch panel
displays are connected.
Hardware menu (below)
• “Panasonic. ZXY100” is displayed in red at the top of the UPDD console screen when the USB cable is
disconnected.