Datasheet

42-inch class Full High Definition Plasma Display
TH-42PF30U
PMS05/24/20111/4
© Panasonic Corporation 2011
Product specification
(design and specification subject to change without notice)
INCLUDED ACCESSORIES
■DISPLAY
Screen Size (Diagonal) 41.6-inch (1,057 mm)
Aspect ratio 16:9
Effective Display Area (WｘH ) 36.3" x 20.4" (921 x 518 mm)
Number of pixcels (HｘV) 1,920 x 1,080 pixels (1 pixel=3cells for R, G and B)
Pixel Pitch (HｘV) 0.480 x 0.480 mm
Contrast Ratio 5,000,000:1
Gradation 6,144 steps (equivalent)
Panel Life
*1
approx. 100,000 hours
Full HD 3D 3D Full HD Ready
*2
■CONNECTION TERMINAL
VIDEO IN BNC x 1 1.0 V [p-p] (75 Ω)
AUDIO IN (L/R) RCA x 1 set 0.5 V [rms]
COMPONENT/RGB IN BNC x 3 Y/G : with sync 1.0 V [p-p] (75 Ω)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
AUDIO IN (L/R) RCA x 1 set 0.5 V [rms]
HDMI IN HDMI TYPE A connector x 1
DVI-D IN DVI-D 24pin x 1
AUDIO IN M3 jack x 1 (Common use with PC) 0.5 V [rms]
PC IN MINI D-SUB 15pin x1 (Female) Y/G : with sync 1.0 V [p-p] (75 Ω)
Plug & Play (VESA DDC 2B) B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
HD/VD : 1.0
~
5.0 V [p-p] (high impedance)
AUDIO IN M3 jack x 1 (Common use with DVI-D) 0.5 V [rms]
SERIAL D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C COMPATIBLE
LAN RJ45 10 BASE-T/100 BASE-TX, Compatible with PJ Link
3D shutter out M3 jack x 1 (for 3D IR Transmitter)
DC 8V out for 3D IR Transmitter Center Plus for EIAJ 4 mm plug
Function Slot:SLOT 2.0 1 (Vacant)
■
ELECTRICAL
■CONTROL TERMINAL
Power Requirements 110-127 V AC, 50 Hz/60 Hz
Power Consumption 390 W
On Mode Average Power Consumption
*3
165 W
Power off condition 0.2 W
Stand-by condition Save ON 0.4 W, Save OFF 0.7 W
■
SOUND
Audio Output 6Ω,16 W [8 W + 8 W] (10 % THD)
■
MECHANICAL
Dimemsions (W x H x D) 40.2" x 24.1" x 3.5" (1,020 × 610 × 89 mm)
Carton Dimensions (W x H x D) 44.8" x 28.4" x 11.2" (1,138 × 721 × 284 mm)
Weight approx. 56.3 lbs. (25.5 kg)
Gross weight approx. 68.3 lbs (31.0 kg)
Cabinet Color Black
■
ENVIRONMENTAL
Operating environment Temperature : 32 F to 104 F (0 ℃ to 40 ℃)
Humidity : 20 % to 80 % (Non condensation)
Altitude : 0 to 9,100 feet (0 to 2,800 m)
Storage environment Temperature : -4 F to 140 F (-20 ℃ to 60 ℃)
Humidity : 20 % to 90 % (Non condensation)
Altitude : 0 to 10,800 feet (0 to 3,300 m)
■
STANDARD (CERTIFICATIONS)
SAFETY REGULATIONS UL60065, CAN/CSA-22.2No60065:03, NOM approval
RADIATION REGULATIONS FCC Part 15 Class-B, ICES-003
Energy star 5.0, CEC Yes
■
REMOTE CONTROL TRANSMITTER
Power Requirements DC 3 V (2 x AA Size batteries)
Operation distance approx. 23 ft (7 m) in front of plasma display
Weight approx. 3.5 oz (100 g) including batteries
- AC power cord - Operating instruction book - Remote control transmitter - Batteries
UPC Code
885170 043299
*3: Based on IEC 62087 Ed.2 measurement method.
*1: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
without sync 0.7 V [p-p] (75 Ω)