Flat Panel Television User Manual

56
Setup menu
The input label changes as follows each time the ◄ or ► button is pressed.
(Skip)
: The INPUT button press will skip its input.
This function can change the label of the Input signal to be displayed. (see page 18)
Customizing the Input labels
Note:
The setting items are the same as the input terminal list of
“Selecting the input signal” (page 18).
2
access
1
select
Select an input terminal and set.
2
change
1
select
Blu-ray3
Blu-ray2Blu-ray1
Original
CATVVCRSTB
DVD2DVD1 DVD3
(Skip)
DVD4
Blu-ray4
Network Setup
External scaler mode
Power save
Off
Off
Component/RGB－in select
RGB
3D Settings
Marker settings
Waveform Monitor
Network Setup
RGB/MONO settings
Screensaver
Extended life settings
Function Button Settings
On/Off Timer Setup
Day/Time Setup
Signal
Input label
SLOT INPUTSLOT INPUT
Input label
VIDEOVIDEO
COMPONENTCOMPONENT
HDMIHDMI
DVIDVI
PCPC
Set the function to operate when the FUNCTION button 1 to 8 on the remote control is pressed.
Using FUNCTION button page 63
2
access
1
select
Select the item and set.
2
change
1
select
Note:
The button functions are confi gured in two ways depending
on the setting (On/Off) of “Studio mode” in the Options menu.
• Function Button 1 - Function Button 8
The following functions are set to the FUNCTION
button.
Function Button Settings
Waveform Monitor*
Marker settings*
HV Delay*
Blue only
3D Settings
Signal
Colour gamut
Scrolling bar
R On/Off
G On/Off
B On/Off
MONO
Test Patterns
Digital zoom
Off timer
External scaler mode
Volume +
Volume -
Mute
* “Waveform Monitor”, “Marker settings” and “HV Delay” can be
set when “Studio mode” in Options menu is “On”.
• Function Button Guide
The function display setting for the FUNCTION button
is confi gured.
On: Press the FUNCTION button to display the
function list of the button.
Off: The function list is not displayed.
Network Setup
Component/RGB－in select
RGB
Marker settings
Waveform Monitor
Network Setup
RGB/MONO settings
Screensaver
Extended life settings
Function Button Settings
On/Off Timer Setup
Day/Time Setup
Signal
3D Settings
Input label
Waveform MonitorFunction Button 1
Function Button Settings
Marker settingsFunction Button 2
HV DelayFunction Button 3
Blue onlyFunction Button 4
3D SettingsFunction Button 5
SignalFunction Button 6
Colour gamutFunction Button 7
Scrolling barFunction Button 8
OnFunction Button Guide