Flat Panel Television User Manual
Table Of Contents
- CONTENTS
- Please read before using the unit
- Getting started
- Basic Features
- Advanced Features
- Support Information
- Ratings List for parental control
- Technical Information
- Care and Cleaning
- Disposal
- Frequently Asked Questions (FAQ)
- DETAILED SPECIFICATION SHEET for TC-P55VT30
- DETAILED SPECIFICATION SHEET for TC-P65VT30
- Index
- Limited Warranty (for U.S.A. and Puerto Rico only)
- Customer Services Directory (for U.S.A. and Puerto Rico)
- Limited Warranty (for Canada)
25
Basic
Viewing 3D images on TV
Accessories
3D Eyewear (1) 3D Eyewear case (1) Charging cable (1)
Ferrite core (1)
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise.
1. Attach the ferrite core as close to USB connector of the charging cable as shown.
2. Close the ferrite core until it clicks.
Mini USB connector
USB connector
Charging the 3D Eyewear
1. Turn off the television power, and set the 3D Eyewear power switch to “OFF”.
2. Connect as shown in the diagram, and turn on the television power.
• The indicator lamp lights red, and charging starts.
• When the indicator lamp turns off, charging is complete.
(Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable.
Mini USB connector
USB connector
Note
●
Be sure to turn the television power on when charging. The battery will not be charged when the television power is
off.