Model No. Número de modelo TC-P55VT30 TC-P65VT30 Owner’s Manual 55”/65” Class 1080p Plasma HDTV (55.1/64.7 inches measured diagonally) Manual de usuario Televisión de alta definición de 1080p y clase 55”/65” de Plasma (55,1/64,7 pulgadas medidas diagonalmente) For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) www.panasonic.com/help For assistance (Canada), please call: 1-866-330-0014 www.vieraconcierge.ca Para solicitar ayuda (EE.UU.
Experience an amazing level of multimedia excitement Enjoy rich multimedia SD memory card USB device Camcorder VCR Personal computer Cable box Amplifier with Speaker system DVD recorder/ Blu-ray Disc recorder DVD player/ Blu-ray Disc player ■ Do not display a still picture for a long time This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty.
VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SDXC Logo is a trademark of SD3C, LLC. “RealD 3D” is a trademark of RealD. This product is covered by U.S. Patent 5,193,000 until August 28, 2011. DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
● Do not place any objects on top of the Plasma TV. If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. In the unlikely event that you receive a shock from this product it is possible that your household outlet may be wired improperly. Have an electrician verify that the TV’s outlet is properly wired.
DANGER/WARNING/CAUTION (3D Eyewear) DANGER CAUTION ■ About Prohibition of Heating ● Do not put 3D Eyewear in fire, heat it or leave it in places that can get hot. 3D Eyewear contains a lithium-ion polymer rechargeable battery, so heating may result in combustion or rupture that may cause burns or fire. WARNING ■ About Prevention of Accidental Ingestion ● Do not store any 3D Eyewear parts in places where small children can reach. There is a danger small children could swallow such parts by mistake.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Accessories/Optional Accessories Accessories Check you have all the items shown. Accessories Remote Control Transmitter Batteries for the Remote Control Transmitter (2) N2QAYB000571 Cable clamper AA Battery Wireless LAN Adapter (p. 41) N5HBZ0000055 K2KYYYY00150 3D Eyewear (p. 24) N5ZZ00000223 Converter cables (p. 11) Owner’s Manual Quick start guide RS232C terminal Specification Child safety Product Registration Card (U.S.A.
Attaching the pedestal to TV ■Assembling the pedestal [TC-P55VT30] [TC-P65VT30] Fix securely with assembly screws A (Total 4 screws). Tighten screws firmly. Fix securely with assembly screws A (Total 6 screws). Tighten screws firmly using Allen wrench C . Accessories Assembly screws A A A THEL090N (for 55”) size (M5 x 25) (Black) (4) C B Front Front THEL090N (for 55”) size (M5 x 25) (Black) (4) ■Set-up Carry out work on a horizontal and level surface.
Warning Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result. Caution Do not use any pedestal other than that provided with this TV. Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
Connections Connection Panels Accessories Back of the TV Antenna adapter (1) ● K1TYYYY00158 a SD card slot (p.28) VIDEO adapter (1) ● K2KYYYY00136 b Component adapter (1) ● K2KYYYY00137 c DIGITAL AUDIO OUT USB1 terminal Audio adapter (1) ● K2KYYYY00138 d e PC adapter (1) ● K1HY20YY0007 LAN connector RS232C terminal PC terminal (serial port)* f * ● For details about the RS232C command, contact Customer Care. (p.
AV cable connection Best To use HDMI terminals AV Equipment HDMI AV OUT DVI OUT HDMI-DVI Conversion cable white R AV Equipment e.g. Blu-ray Disc player L white e.g. Blu-ray Disc player AUDIO OUT red red d Audio adapter ● VIERA Link connection, please refer to p. 35 ● The HDMI connection is required for a 1080p signal.
Audio connection Audio equipment Optical cable e Optical adapter DIGITAL AUDIO IN e.g. Amplifier ● For HDMI-ARC (Audio Return Channel) connection, see p.
Identifying Controls TV controls/indicators Front of the TV Back of the TV 3D Eyewear transmitter Selects channels in sequence Volume up/down POWER button Displays the Main Menu Changes the input mode Chooses Menu and Submenu entries Power indicator (on: red, off: no light) Remote control sensor Within about 23 feet (7 meters) in front of the TV set C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System) (p.
First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 55) is set to “No”.
ANT/Cable setup Do you use a Cable, Satellite or Fiber Optic box with this TV? ANT/Cable setup Step 4 of 7 Do you use a Cable, Satellite or Fiber Optic box with this TV? Yes No OK Select Return Yes No b Select connection type for Cable or Satellite box and go to (Input labels) a Select signal type (Cable/Antenna) ANT/Cable setup Step 4 of 7 ANT/Cable setup How does the TV receive its programming content? Cable service (No box) Step 4 of 7 Which wiring method is used to connect your box to t
Configure Network settings Select the Network type Network settings Step 6 of 7 Select Ethernet cable of wireless network. Ethernet cable Wireless(Wifi) Set later Set later: Go to You can set in “Setup” menu later. Wireless (WiFi): Start “Wireless network” (p. 18) OK Select Return Select the setting mode Network settings Step 6 of 7 Checks for proper network connection, settings and communication to the Internet and server automatically.
Complete First time setup Congratulations! You are done. The First time setup can be repeated at any time. Press MENU and select SETUP; then “First time setup”. Congratulations! Setup is complete. Enjoy your Panasonic VIERA TV. OK RETURN To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input. ■ About wireless LAN ● To use the Wireless LAN Adapter, an access point needs to be obtained.
Watching TV Turn power on (Remote) (TV) Note Please select correct input --> (p. 23) or Menu > Setup > Advanced setup > VIERA Connect Banner Select a channel number To directly enter the digital channel number up or When tuning to a digital channel, press the button to enter the minor number in a compound channel number. down example: CH15-1: Note Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal reception between cable TV and antenna. (p.
Change aspect ratio and Zoom the picture ■ Press FORMAT to cycle through the aspect modes (p. 57) • 480i, 480p: FULL/JUST/4:3/ZOOM • 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM Use when the picture does not fill the whole screen (bars appears on either side of the image) or portions of the picture is trimmed. Note 1. Some content, such as film-based movies, are available in extra-wide format. Top and bottom bars are unavailable. 2.
■ Other Useful operations Entering characters You can use the remote control keys to enter the alphanumeric characters. ■ Switches input mode Menu Proxy setting Proxy address 1 4 8 ABC → abc → 123 ↑_____________| Proxy port 0 ■ Press each number key to cycle through the alphanumeric character OK Select RETURN ABC → abc 1 @. 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9WXYZ LAST 0 - , Delete Navigation area ● You can also use a USB keyboard (not supplied) to enter the alphanumeric characters.
Using VIERA TOOLS VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on the TV screen. Display VIERA TOOLS Select the item select next Set each item 3D Change the view 3D⇔2D (p. 27) THX Change to “THX” mode. Picture mode (p. 51) VIERA Connect Displays VIERA Connect Home Screen for Enjoying Internet Services (p. 45) Media player Media player (p. 28-33) Press to exit from a menu screen DLNA Using DLNA feature (p.
Watching content from external devices With the connected equipment turned On Display the Input select menu Select the input mode Input select 1 ANT/Cable In Not used 2 HDMI 1 GAME 3 HDMI 2 4 HDMI 3 5 HDMI 4 6 Component 7 Video 8 PC or AUX select (example) enter (shortcut) Press the corresponding NUMBER button on the remote control to select the input of your choice. Or, press the INPUT button repeatedly, to cycle through the available inputs.
Viewing 3D images on TV You can enjoy 3D images by wearing the 3D Eyewear supplied with this TV and to view 3D broadcasts and 3D image software. Optional Accessories (p.8) Basic features of 3D Eyewear This product cannot be used as sunglasses. This product can be worn over vision correction glasses. Part names and functions Infra-red receiver Receives infra-red signals from the television.
Accessories 3D Eyewear (1) 3D Eyewear case (1) Charging cable (1) Ferrite core (1) Attaching Ferrite Core Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise. 1. Attach the ferrite core as close to USB connector of the charging cable as shown. 2. Close the ferrite core until it clicks. Mini USB connector Charging the 3D Eyewear USB connector Mini USB connector Viewing 3D images on TV 1.
Using Precautions Liquid Crystal Shutter Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the 3D Eyewear. Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc. Doing so may cause damage to the 3D Eyewear, and reduce the quality of the 3D image. Infra-red receiver section Do not soil the infra-red receiver section or attach stickers etc. to it.
Change the view 3D⇔2D ■ Simply switches 3D ⇔ 2D images (Auto mode) select 3D format select ● VIERA TOOLS -->p. 22 ”3D” icon also available. 3D 2D OK (example) ● Switches to Manual mode (see below) ■ Change 3D format (Manual mode) During above operation press red button and switch to Manual mode.
Using Media player You can view still and motion images and play music saved on a USB flash memory and an SD card.
Viewing Contents Insert Media (SD card or USB flash memory) • Auto play setting Image viewer auto play (p. 55) Display Media player Select Drive (Display connected drive) Media player select Drive select OK OK Select RETURN SD memory card Select the Media Media player Basic select Media select OK OK Select RETURN Photos Videos Music SD memory card Select the data (Photos/Videos/Music) How to view the data differs depending on data storage conditions.
Photos view [Photos thumbnail] Media p layer [Features] Photos Select SUB MENU Slideshow ● Slideshow setting ● Sort ● Drive select ● Media select All photos OK SD memory card Info RETURN Sort * In DMR mode, Slideshow is not available DMR: Digital Media Renderer p. 40 Drive select Media select [Photos playback screen] Photo status Slideshow Single view ● To display/hide Single view Guide and Banner Navigation Guide Slideshow Single view * In DMR mode, Rotate/OK/Next/ Prev.
Sort Display “Sort select” menu and select item Displayed each view select Media player Photos • Folders (ascending order of numeric/alphabetical) • Sort by month (ascending order of the month) • Sort by date Sort by Date Folders Sort by date 23/10/2009 25/10/2009 01/11/2009 05/11/2009 10/11/2009 24/11/2009 01/12/2009 03/12/2009 20/12/2009 22/12/2009 22/11/2009 23/11/2009 Sort by month OK Select OK SUB MENU Slideshow RETURN Sort Info Drive select SD memory card Media select (e.g.
Videos view [Videos thumbnail] Media p layer [Features] Videos Trip1 Trip2 Trip3 Trip4 Trip5 Room Nature1 Nature2 Nature3 Nature4 Nature5 Nature6 2009_4 2009_7 * In DMR mode, Resume playback is not available ● Play ● Drive select ● Media select ● Aspect change Titles/Folders view 2009_9 Select SUB MENU Play OK SD memory card Info RETURN Drive select Media select [Videos playback screen] SD 01/04/2010 15:34 Movie banner 00:00.10 00:00.
Music view [Music thumbnail] Media player My Music_1 [Features] Music My Music_2 Select SUB MENU Play Folder ● Play folder ● Drive select ● Media select Folders My Music_3 OK SD memory card Info RETURN Drive select Media select [Music playback screen] Navigation area AAAAAA BBBBBBB XXXXXXX Forward Play/Pause Stop Reverse RETURN 00:00.05 / 00:00.49 RETURN • Forward/Reverse Five level of 1 to 5 (x2, x5, x30, x70, x100) are available. * In DMR mode, Next skip/Prev.
VIERA LinkTM “HDAVI ControlTM” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with compatible Panasonic products. This TV supports “HDAVI Control 5” function. Connections to equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables enables VIERA Link controls. Equipment with the “HDAVI Control” function enables the following operations: Version Operations (See p.
VIERA Link™ Connections (with VIERA Link function) ■ Terminal overview Back of the TV VIERA LinkTM “HDAVI ControlTM” ■ Connecting DVD Recorder (DIGA) HDMI cable DVD recorder (DIGA) with VIERA Link function ■ Connecting Home theater system/AV amp HDMI 1 is recommended. HDMI cable AV amp with VIERA Link function DVD recorder (DIGA) with VIERA Link function No optical cable is necessary when connecting a Home Theater supporting “HDAVI control 5” with an HDMI cable.
VIERA Link settings and Available features To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”. Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p. 34) Display the menu Select “VIERA Link settings” in “Setup” Menu Setup 2/2 VIERA Link settings select ECO / energy saving Keyboard type U.S.
Automatic Input Switching When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to the appropriate input, when playback begins on one of those devices. • For a Home theater system the speakers automatically switch to the theater system. Power on link Yes: The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible equipment is initially turned on and the Play mode is selected.
VIERA Link menu and Available features Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p. 34) Display the VIERA Link menu or select next Select the item select VIERA Link control Recorder Speaker output TV Back to TV in the VIERA Link menu may be grayed out • Items if no compatible equipment is connected (must be HDAVI Control 2 or later) or if the equipment has not initiated a connection with the TV.
Speaker control You can select the Home theater or TV speakers for audio output. Control the theater speakers with the TV remote control. This function is available only when a Panasonic Amplifier or Player theater is connected. select change Recorder Volume up / down Mute Select “Speaker output” Select “Home theater” or “TV” VIERA Link control ■ Home theater: Adjustment for the equipment Speaker output sound of the TV is muted. • The the equipment is turned off, the TV speakers • When take over.
Using Network services Available Network service and features ■ VIERA Connect p. 45 Easily expandable cloud-based services and carefully selected apps. ■ Using DLNA feature (Home network) p. 46 This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org.
Network Connections Contact your Broadband service provider NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at no less than the following connection speed. If you already have such service, make sure that the connection speed exceeds the following. ● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. ● Dial-up Internet service cannot be used for VIERA Connect.
Network settings This is a setting for connecting to a broadband environment.
Wireless network (Wireless network setting) ■ Sets / Changes wireless network setting Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting Wireless network select Please choose connection method: OK Search for wireless networks WPS (Wi-Fi Protected Setup using push button) WPS (Wi-Fi Protected Setup using PIN number) Manual settings * Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification ● For more details on setting of an
Network link ■ Edit the name of this TV ■ Switches DLNA remote control (Disable/Enable) Sets your favorite name for this TV. This name will be used to display the name of this TV on the screen of the other Network compatible equipment.
VIERA Connect (Enjoy Internet Service) You can access Internet services from the VIERA Connect Home screen. ● You need a broadband environment to use this service. Preparations ● Network connections (p. 41) ● Network settings (p. 42-44) Display the Home screen Select the item and press OK select ■ Press to exit from Video communication (e.g. Skype™) requires an exclusive Communication Camera TY-CC10W (p. 8). MORE BACK a menu screen ■ Press to go back to the Home screen This screen is an example.
Using DLNA feature You can share the contents (Photo, Video, Music etc.) stored in DLNA Certified media server with your home network system. Preparations ● Network connections (p. 41) ● Network settings (p. 42-44) Display VIERA TOOLS Select the “DLNA” select next Select server Display available server.
Network Camera You can operate the Network camera from the TV remote and also check the images from the Network camera on your TV. ● VIERA Link control only with the TV’s remote control (p. 39) Preparations ● Network connections (p. 41) ● Network settings (p.
Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions.
Manual program (Set manually) Use this procedure when changing the channel setup or changing the channel display. Also, use this to add or skip channels from the channel list manually. You can select a channel tuning mode (Digital only/Analog only) in “Channel surf mode”(p. 55) Edit ● Caption Edit CH caption Channel Select Apply Favorite Add ... Yes 3 ... ... Yes 4 ... ... Yes 5 ... ... select next Caption Select or edit the station identifier.
How to Use Menu Functions Various menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Display the menu ● Shows the functions that can be adjusted. ● Some functions will be disabled depending on the type of input signal. Menu structure Menu Menu bar Press OK to move to the Menu items. Input labels HDMI 1 HDMI 2 HDMI 3 Menu items Press OK to proceed to the next screen if available.
● “Reset to default” will be grayed out if no changes are made in the following menus: “Picture”, “Pro settings”, “PC adjustments”, “Audio” and “Closed caption”. Picture settings Adjust the image or picture quality Settings Items Reset to defaults Picture mode (Each setting (2D/3D mode) will be retained independently.) Vivid Standard Cinema THX Contrast, Brightness, Color, Tint, Sharpness Color temp. Color mgmt. Photo enhancement C.A.T.S.
Settings Items Item Description • Some menus are grayed out depending on the input signal or condition. (e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.) Changes the format (aspect ratio). Aspect Screen format FULL/H-FILL/ adjustments JUST/4:3/ZOOM Lets you choose the aspect depending on the format of received signal. (p. 57) Selects between 95 % (Size 1) or 100 % (Size 2) for the HD size Size 1/Size 2 scanning area with High-definition signal.
Settings Items Item Description • Some menus are grayed out depending on the input signal or condition. (e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.) Minimizes noise and cross-color in the picture. Advanced 3D Y/C filter Off/On picture Selects image resolution of component-connected devices. SD: Standard Definition HD: High Definition Only used with 480p video signal. Reduces noise of specific digital signals of DVD, Cable box, etc.
Lock Locks specified channels or shows to prevent children from watching objectionable content. You will be asked to enter your password each time you display the Lock menu. • Password setting/entering (p. 21) Set “Custom” in “Mode” to specify “Channel”, “Game”, “Program” and “VIERA Connect” settings. Settings Mode Channel (These channels will be blocked regardless of the program rating.
Setup Settings 3D settings Channel surf mode Language Clock ANT/Cable setup Input labels (Display labels of connected devices) Items Item Description See p. 27 for more detail. Sets the mode to select the channel with the Channel up/down button. All/Favorite/ Favorite: Only channels registered as FAVORITE. (p. 20) Digital only/ Analog only English/Español/ Selects the screen menu language. Français Adjusts the clock. (p. 17) See p. 48-49 for more detail.
Ratings List for parental control “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. ■ U.S. MOVIE RATINGS (MPAA) NR G PG PG-13 R NC-17 X NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED.
Technical Information Aspect Ratio (FORMAT) Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format of the received signal and your preference. (p. 20) (e.g.: in case of 4:3 image) ● FULL ● JUST JUST FULL Enlarges the 4:3 image horizontally to the screen’s side edges. Stretches to justify the 4:3 image to the four corners of the (Recommended for anamorphic picture) screen.
Data format information ● Compatible Data format for Media player (SD card/USB flash memory)/DLNA p. 32 DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard EXIF: Exchangeable Image File Format Note ● Format the card with the recording equipment. ● The picture may not appear correctly on this TV depending on the recording equipment used. ● Display may take some time when there are many files and folders.
VIERA LinkTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 35) ● This function may not work normally depending on the equipment condition. ● The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode. ● Image or sound may not be available for the first few seconds when playback starts. ● Image or sound may not be available for the first few seconds when input mode is switched.
4:3 side bars Do not display a picture in 4:3 mode for an extended period, as this can cause “Image retention” to remain on either or both sides of the display field. To reduce the risk of such “Image retention”, change the brightness of the side bars. See page 51 for more information ● The side bar may flash (alternate black/white) depending on the picture. Side Bar Image retention 4:3 Screen Display PC Input Terminals ● Signal Names for D-sub 15P Connector Pin No.
Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth. ● If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove excess liquid.
Disposal 3D Eyewear A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure below, and remove the internal rechargeable battery. Do not disassemble this product except when disposing of it. Danger ● As the rechargeable battery is specifically for this product, do not use it for any other device. • Do not charge the removed battery.
Frequently Asked Questions (FAQ) If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, visit the Panasonic website for further assistance.
Questions Sound Other Networking 64 Answers Why is there no sound coming from the TV? Make sure the volume is up and MUTE is off. Confirm the TV speakers are set to ON by pressing MENU and selecting “Audio” --> “Advanced audio”. (p. 53) Check that the correct SAP (Secondary Audio Program) is selected by pressing the SAP button on the remote control. (p. 19) If the TV is connected to a Panasonic Home Theater via HDMI cable, then check VIERA Link controls. (p.
Questions Answers Networking How do I check for the latest software (firmware) version for my TV? In the main menu, select “Setup”. Highlight “Network Settings” and press OK. Select “Software Update”. The current version and latest version software will be shown. If software update is “grayed out”, the TV is not connected to the Internet. If newer version is available, update your TV. Follow the onscreen instructions, do not power off the TV until the update is complete.
Specifications TC-P55VT30 Power Source TC-P65VT30 AC 120 V, 60 Hz Power Plasma Display Consumption panel Rated Power Consumption 438 W 516 W Standby condition 0.2 W 0.2 W Drive method Aspect Ratio Visible screen size (W × H × Diagonal) AC type 16:9 55 ” class (55.1 inches measured diagonally) 65 ” class (64.7 inches measured diagonally) 48.0 ” x 27.0 ” x 55.1 ” 56.4 ” x 31.7 ” x 64.
3D Eyewear Lens type Liquid Crystal Shutter Usage temperature range 32°F - 104°F (0 °C - 40 °C) Charging power supply DC 5 V (supplied by USB terminal of a Panasonic TV) Battery Lithium-ion polymer rechargeable battery DC 3.7 V, 70 mAh Operation time*1: Approx. 30 hours Charging time*1: Approx. 2 hours Viewing range*2 Transmitter for 3D Eyewear Within 10’5” (3.2 m) from front surface (Within ± 35° horizontal, ± 20° vertical) Materials Main body: Resin Lens section: Liquid crystal glass 6.
This product incorporates the following software or technology: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software developed by the Independent JPEG Group, (4) the software developed by the FreeType Project, (5) the software licensed under the GNU LESSER General Public License (LGPL) and/or, (6) open sourced software other than the software licensed under the LGPL.
Index A B C D E F H I L M R Safety ....................................................................... 4 SAP ........................................................................ 19 Scan .................................................................. 16,48 SD Card ............................................................ 28,58 Signal Meter ........................................................... 49 Sleep ......................................................................
Limited Warranty (for U.S.A.
Customer Services Directory (for U.S.A. and Puerto Rico) Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
Limited Warranty (for Canada) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
Note Limited Warranty (for Canada) Support Information 73
USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. Sólo Estados Unidos: La disposición puede estar regulada en su comunidad debido a consideraciones ambientales. Para información sobre la disposición o reciclaje, por favor visite la página web de Panasonic: http://www.panasonic.com/environmental ó llame al 1-888-769-0149.
