SAP POWER DBS/CBL VCR TV DV D CH OK VOL VOL CH RETURN EXIT MENU TV/VIDEO RECALL MUTE 1 2 4 5 7 8 GUIDE 3 Operating Instructions 6 9 SLEEP PROG R-TUNE LCD TV 0 REW PLAY FF PAUSE STOP REC ASPECT TV/VCR VCR/DBS CH TV Model No. TC-22LH30 For assistance, please call : 1-800-211-PANA (7262) or send e-mail to : consumerproducts@panasonic.com or visit us at www.panasonic.com (U.S.A.) For assistance, please call : 787-750-4300 or visit us at www.panasonic.
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.
Important Safety Instructions 18) If an outside antenna is connected to the television equipment, be sure the antenna system EXAMPLE OF ANTENNA is grounded so as to provide some protection GROUNDING AS PER (NEC) against voltage surges and built up static NATIONAL ELECTRICAL charges. In the U.S.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD TV. To obtain maximum benefit from your set, please read these instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt, and record the model number and serial number of your set in the space provided on the rear cover of these instructions.
Table of Contents Important Safety Instructions .............................. 2 SUPPLIED ACCESSORIES ................................... 5 Maintenance .......................................................... 5 Installation ............................................................. 6 Remote control battery installation ...................... 6 Connections .......................................................... 7 Antenna Connection ............................................ 7 Cable Box Connection .
Installation Receiver Location Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Connections Note: Cables and connectors are not supplied with this set. Antenna Connection For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. The antenna mode must be set to TV (see page 14, Mode selection).
Connections Connecting Other Equipment Rear Input Terminals Back of the TV To bundle the cables with the clamper 1. Pull upward. 2. Put the cables and close. Note: Do not put the antenna cable and the power cord together to avoid noise.
Connections HDMI Connection HDMI∗1 (High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. The HDMI terminal supports both video and audio information. You can connect an EIA / CEA-861 / 861B∗2 compliant consumer electronic device, such as a Set Top Box or DVD player with HDMI or DVI output terminal to the HDMI∗1 input terminal.
Connections Connecting Headphones / Earphones M3 plug (Not supplied) Power ON / OFF Preparation Back of the TV Connect the plug to the wall outlet. Note: The TV consumes some power as long as the power cord is inserted into the wall outlet. AC120V, 60Hz Power cord On the main unit Main POWER switch TV/VIDEO POWER VOL CH POWER Press to turn the TV’s main power on / off.
Basic Controls < Top Side Controls > TV/VIDEO POWER CH VOL TV/VIDEO button Volume Up/Down Channel Up/Down Main POWER switch Press to turn the TV’s main power on/off.(see page 10) Power button Press to turn the TV ON or OFF. Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch. Remote control sensor Within about 23 feet (7 meters) in front of the TV set. SAP button Selects Audio mode (See page 24).
Menu Operations 1 2 Press to display MENU screen.
Menu Operations Press to select the MENU screen (ADJUST or SET UP). CH OK VOL VOL Press to select the sub-menu feature. CH Press to display the sub-menu screen. • To return to the previous screen : MENU • To exit the MENU screen: This returns TV to normal viewing.
Tuning Channels 1 2 Press the TV/ VIDEO button to display the TV channel. MENU ADJUST Press the MENU button to display the MENU screen and select SET UP. SET UP LANGUAGE PROGRAM CH LOCK Press to select PROGRAM CH. CLOSED CAPTION CH OK VOL VOL Press to display the PROGRAM CHANNELS screen. INPUT LABEL OTHER ADJUST CH Mode selection Press to select MODE. 3 PROGRAM CHANNELS TV MODE Press to select TV or CABLE.
LOCK V-Chip technology allows parents to use the TV rating codes to block programs that they feel are inappropriate for their children to watch. 1 Press the MENU button to display the MENU screen and select SET UP. Press to select LOCK Press to display the LOCK screen. CH OK VOL MENU ADJUST SET UP LANGUAGE VOL PROGRAM CH CH LOCK CLOSED CAPTION INPUT LABEL 2 1 2 3 4 5 6 7 8 9 0 Input 4-digit code. • To clear the numbers while entering the code, press Up or Down .
LOCK U.S. TV PROGRAMS This TV features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. 6 Press to select VIEW NR PROGRAMS? CH OK VOL VOL CH Press to select NO or YES. NO : Cannot view programs with NR signals. YES : Can view programs with NR signals. U. S. TV PROGRAMS VIEW NR PROGRAMS? NO YES SETTING BASIC TV–Y TV–Y7 FV TV–G 7 Press to select SETTING.
LOCK U.S. MOVIES This TV features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. 6 U. S. MOVIES Press to select VIEW NR PROGRAMS?. CH OK VOL VOL CH Press to select NO or YES. NO : Cannot view programs with NR signals. YES : Can view programs with NR signals. VIEW NR PROGRAMS? NO YES G PG PG-13 R 7 Press to select the rating.
LOCK CANADIAN ENGLISH RATINGS CHART E C C8+ G PG 14+ 18+ Exempt - Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. Programming intended for children under age 8. No offensive language, nudity or sexual content. Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content. General programming, suitable for all audiences. Parental Guidance suggested.
CLOSED CAPTION This unit has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows you to read the dialogue of a television program or other information. Notes: • This feature is available only with the 480i input signal and with the programs including the closed caption.
INPUT LABEL You can change the video input labels displayed on the screen to match the connected device (VCR, DVD player etc.). 1 MENU ADJUST Press the MENU button to display the MENU screen and select SET UP. CH OK VOL SET UP LANGUAGE Press to select INPUT LABEL. PROGRAM CH Press to display the INPUT LABEL screen. CLOSED CAPTION LOCK INPUT LABEL VOL OTHER ADJUST CH 2 Press to select the video input. CH OK VOL VOL CH Press to select the INPUT LABEL.
PICTURE ADJUST 1 Press the MENU button to display the MENU screen and select ADJUST. MENU ADJUST Press to select PICTURE ADJUST. Press to display the PICTURE ADJUST screen. CH OK VOL SET UP PICTURE PICTURE ADJUST POSITION / SIZE VOL AUDIO CH AUDIO ADJUST 2 Press to select the sub-menu. CH OK VOL VOL Adjust the setting watching the picture behind the menu. Press to activate the setting if necessary.
PICTURE ADJUST BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE, COLOR TEMP You can change the level of each Item (BACK LIGHT, PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS, AI PICTURE and COLOR TEMP) for each MENU (STANDARD, CINEMA, VIVID and CUSTOM) according to your personal preference. Function Luminance of the back light is adjusted. Selects proper brightness and density for the room. Adjusts for easier viewing of dark pictures such as night scenes. Adjusts the level of color.
POSITION/SIZE Press to select POSITION/SIZE. CH MENU ADJUST OK VOL VOL SET UP PICTURE PICTURE ADJUST CH POSITION / SIZE Press to display POSITION/SIZE screen. AUDIO AUDIO ADJUST POSITION/SIZE NORMAL NORMALIZE SIZE 1 RETURN POSITION For “ZOOM” mode (see page 25) ZOOM • POSITION Press to move the picture up or down. • Press OK to return to the original position. CH OK VOL VOL CH • SIZE ZOOM Press to shrink the picture vertically [by 15 steps: 15 (original setting) down to 1].
AUDIO ADJUST 1 Press the MENU button to display the MENU screen and select ADJUST. Press to select AUDIO ADJUST. CH SET UP PICTURE PICTURE ADJUST OK VOL MENU ADJUST VOL POSITION / SIZE CH AUDIO AUDIO ADJUST Press to display the AUDIO ADJUST screen. 2 AUDIO ADJUST Press to select the sub-menu. MODE CH OK VOL VOL CH PAGE1/2 NORMAL DYNAMIC Select the setting while listening to the sound. BASS + 6 TREBLE + 9 Press to activate the setting if necessary.
ASPECT Controls This feature allows you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. R-TUNE PROG Each time you press the button: ASPECT TV/VCR 0 JUST REW PLAY FF PAUSE STOP REC ASPECT TV/VCR ZOOM FULL NORMAL Notes: • This feature does not work for 1080i and 720p input signals. • The aspect setting is stored separately for TV, VIDEO1, VIDEO2, COMPONENT1, COMPONENT2 and HDMI.
Operating peripheral equipment using the remote control Programming the remote control code You can operate other manufacturers’ components using this TV’s remote control. Preparations: • Connect the plug of the external component to the wall outlet. • Make sure the component is turned off. SAP 1 CH OK + POWER VOL POWER Press and hold POWER and OK together, for at least 5 seconds. • The mode selection buttons flashes, and then release the POWER and OK.
Operating peripheral equipment using the remote control Infrared Code Index The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model. Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.
Operating peripheral equipment using the remote control Codes for DVD Brand Denon Ferguson JVC Mitsubishi Nordmende Panasonic Philips Pioneer RCA DV D Code 100 101 109 105 101 100 103 102 101 Brand Saba Samsung Sharp Sony Technics Thomson Toshiba Yamaha Zenith Code 101 110 108 104 100 101 103 100 107 Codes for Cable Box DBS/CB L Brand ABC Archer Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini General Instrument/ Jerrold Hamlin Hitachi Macom Magnavox Memorex Movietime Oak Panasonic Phi
Operating peripheral equipment using the remote control Mode Operational Key Chart This chart defines which keys are operational after programming (if needed), while in the selected remote control mode DTV, CABLE, DBS, VCR, DVD ...etc.
Manuel de instrucciones [Resumen] Estimado cliente de Panasonic Bienvenido a la familia de clientes de Panasonic. Esperamos sinceramente que disfrute durante muchos años de su nuevo televisor LCD. Para obtener el máximo beneficio de su aparato, lea estas instrucciones antes de hacer cualquier ajuste, y guárdelas para poder utilizarlas como referencia en el futuro.
Conexión Nota: Con este aparato no se suministran cables ni conectores. Conexión de antena Para recibir correctamente los canales de VHF/UHF se requiere una antena externa. Para obtener la mejor recepción se recomienda utilizar una antena para exteriores. El modo de antena debe ajustarse a TV (consulte la página 37, Selección del mode).
Conexión Conexión de otro equipo Terminales de entrada traseros La parte posterior del televisor Para liar los cables con la abrazadera 1. Tire hacia arriba. 2. Ponga los cables y cierre. Nota: Para evitar ruidos, no ponga juntos el cable de la antena y el de la alimentación.
Conexión Conexión de auriculares Clavija M3 (No suministrado) Conexión / desconexión de la alimentación La parte posterior del televisor Preparación Conecte el enchufe al tomacorriente. Nota: El televisor consumirá algo de corriente siempre que el enchufe del cable de alimentación esté introducido en la toma de corriente.
Operaciones con menús 2 1 Púlselo para visualizar la pantalla MENU. SAP POWER MENU Ajuste MENU Ajuste Configu. Imagen Ajuste Imagen POS / TAMAÑO Sonido DBS/CB VCR Configu. Ajuste Sonido DV TV Imagen Ajuste Imagen L POS / TAMAÑO A o MENU Ajuste CH O C OTIK Configu. N Sonido D Idioma Ajuste Sonido VOL VOL Prog. Canales Bloqueo Subtítulos CH RETURN EXIT MENU TV/VIDEO RECALL MUTE Ponga Títulos Otro Ajuste GUIDE 1 2 3 4 5 6 7 8 9 MENU Ajuste Configu.
Operaciones con menús Púlselo para seleccionar la pantalla MENU (Ajuste o Configu.). CH OK VOL VOL Púlselo para seleccionar la función de menú secundario. CH Púlselo para visualizar la pantalla de menú secundario. • Para volver a la pantalla anterior : • Para salir de la pantalla MENU : RETURN EXIT MENU Con esto se retorna a la visión normal.
Controles básicos < Controles del lado superior > TV/VIDEO POWER CH VOL Botón TV/VIDEO Subida/bajada del volumen Canal superior/inferior Interruptor POWER principal Púlselo para conectar/desconectar la alimentación principal del televisor (consulte la página 33) Botón de la alimentación Púlselo para encender o apagar el televisor. Nota: El cable de la alimentación del televisor deberá enchufarse primero al tomacorriente, y el televisor encenderse luego con el interruptor POWER (modo de espera).
Sintonización de canales 1 2 Pulse el botón TV/VIDEO para visualizar el canal de TV. MENU Ajuste Pulse el botón MENU para visualizar la pantanlla MENU y seleccione Configu. Pulse para seleccionar Prog. Canales. Pulse para visualizar la pantalla OK Prog. Canales. CH VOL VOL Configu. Idioma Prog. Canales Bloqueo Subtítulos Ponga Títulos Otro Ajuste CH Selección del mode Pulse para seleccionar MODO. 3 Prog. Canales TV MODO Pulse para seleccionar TV o CABLE.
Troubleshooting If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Symptoms Checks Picture Sound Antenna location, direction or connection. Snowy Picture Noisy Sound Multiple Image Normal Sound Aerial location, direction or connection.
Specifications Power Source Power Consumption LCD Screen Size (W × H × diagonal) Channel Capability Sound Speakers Audio Output Headphones FEATURES Operating Conditions Connection Terminals INPUT COMPONENT VIDEO INPUT OUTPUT HDMI Dimensions ( W × H × D ) Including TV Stand TV Set Only Mass (Weight) TC-22LH30 AC 120 V, 60 Hz Average use : 84 W (Maximum Current 1.1 A) Stand-by condition : 0.6 W 1280 × 720 pixels widescreen LCD panel. 559mm (22-inch) diagonal. 19.20 ″ ×10.80 ″× 22.03 ″ (487.7 mm × 274.
Customer’s Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
