Operating Instructions

36
RQT8640
∫ About file names
The “xxx” in a [VOICExxx]
([
TUNERxxx]) file name is the
recording counter. It increases
by 1 from [001] to [300] each
time a recording is made. Even if
you erase selected files, the
recording counter of the next file
recorded is 1 more than the last
file recorded and you cannot
record any more files when the
counter number reaches [300].
In this case, erase unwanted
files and then select
[RENUMBER] to renumber the
recording counter of all the
recorded files.
≥ The recorded sound is
automatically set in [VOICE
REC] mode. You cannot adjust
the volume while recording.
≥ Recorded files are saved with
the file name “VOICExxx”.
≥ You can record files from
[VOICE001] to [VOICE300].
∫ About Recording (FM
recording and Voice
recording)
≥ This unit does not have a clock
function so the recording date and
time of files recorded on this unit
is shown as [2006/01/01/00:00] on
Voice Editing. The recording date
and time can be changed on
Voice Editing, however the file
format must be converted from a
WAVE file to a VM1 file. For
details, refer to the PDF operating
instructions for Voice Editing.
≥ One file can be recorded
continuously for up to
approximately 12 hours.
(Recording stops automatically
about 12 hours after it starts.)
≥ When the remaining memory
becomes less than 10 minutes
while recording, the status
indicator starts flashing more
rapidly.
≥ Recorded files are monaural.
SV-SD370V.570V_English.book 36 ページ ２００６年４月２０日 木曜日 午後１時１８分