AV30U.book 1 ページ ２００３年２月１４日 金曜日 午前１０時１４分 R SD Multi AV Device Operating Instructions Model No. SV-AV30U Before use, please read these instructions completely. For USA assistance. please call:1-800-211-PANA(7262) or send e-mail to:consumerproducts@panasonic.com For Canadian assistance. please call:1-800-561-5505 or visit us at www.panasonic.
AV30U.book 2 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Before opening the CD-ROM package, please read the following. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
AV30U.book 3 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Contents End User License Agreement ......... 2 Information for Your Safety ............. 4 Introduction ..................................... 7 Preparation Standard Accessories ..................... 8 Optional Accessory ......................... 8 Controls and Components .............. 9 Power Supply................................ 10 Inserting a Memory Card .............. 11 Using the LCD Monitor ................. 12 Using the Remote Controller/ Earphone ....
AV30U.book 4 ページ ２００３年２月１４日 Disconnecting the USB Cable safely .............................................47 If you no longer need software (Uninstall) ......................................47 Constructing a Folder when the Memory Card is used with a PC....48 Others Charge the built-in battery for maintaining the date information ....................................49 After Use .......................................49 Indications .....................................50 Notes & Precautions............
AV30U.book 5 ページ ２００３年２月１４日 金曜日 午前１０時１４分 ≥Injury or material damage resulting from any kind of use that is not in accordance with the operating Instructions are the sole responsibility of the user. ≥Please note that the actual controls and components, menu items, etc. of your SD Multi AV Device may look somewhat different from those shown in the illustrations in these Operating Instructions.
AV30U.book 6 ページ ２００３年２月１４日 金曜日 午前１０時１４分 FCC Note: (U.S. only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AV30U.book 7 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Introduction This SD Multi AV Device can record MPEG4 moving pictures, still picture and voice data. Additionally, it can play back a high quality music file of the MPEG2AAC and MP3 format (Records files with the supplied SD- Jukebox Ver.3.0). And using the viewer software, SD-MovieStage Ver.2.0 (supplied accessory), the MPEG4 moving picture data can be edited on the personal computer.
AV30U.book 8 ページ ２００３年２月１４日 金曜日 6 Preparation 午前１０時１４分 Remote Controller (N2QCBD000029) (l 12) LD HO EQ Standard Accessories 1 AC Adaptor (VSK0626) (l 10) ≥Supplies power to the SD Multi AV Device. CAUTION: This unit will operate on 110/120/220/ 240 V AC. An AC plug adaptor may be required for voltages other than 120 V AC. Please contact either a local or foreign electrical parts distributor for assistance in selecting an alternate AC plug.
AV30U.
AV30U.book 10 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Power Supply ª Using AC Adaptor 1 2 Connect the AC Adaptor to AC Main socket. Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device. 1 DC IN 4.8V 2 THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. ª Charging the Battery 1 2 3 4 5 While holding the [ ] part, slide it to remove the Battery Compartment Cover.
AV30U.book 11 ページ ２００３年２月１４日 金曜日 午前１０時１４分 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Inserting a Memory Card An SD Memory Card can be used for this SD Multi AV Device. 1 Hold the Memory Card placing the cut off corner 1 at the front with the label 2 facing up, and then insert it fully into the Memory Card Slot horizontally.
AV30U.book 12 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Using the LCD Monitor 1,2 Record and play the video image while viewing the LCD Monitor. 1 2 1 3 Put your finger on the groove 1 to open the LCD Monitor. Adjust the LCD Monitor angle according to the desired recording/playing angle. ≥The LCD Monitor can rotate up to the angles illustrated.
AV30U.book 13 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Turning the Power On/ Selecting Operation Modes 11 Select a desired mode on the mode selection screen. 1 2 3 OFF PLAY REC Set the Power/Mode Switch to [PLAY] or [REC]. ≥The SD Multi AV Device is turned on. Set to [REC] to select Record Mode. Set to [PLAY] to select Play Mode. Press the [MODE] Button to select a Operation Mode. ≥Every time the [MODE] Button is pressed, the Operation Mode changes as followed.
AV30U.book 14 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Using the Menu Screen Allows the functions usable in the selected mode to be set from the menu. 1 2 3 4 5 6 1 Select a desired mode. (l 13) OFF PLAY REC Press the [MENU] Button. ≥The menu in the selected mode is displayed. Press the UP/DOWN side of the Multifunction Button to select a desired item. Press the [1 SET] Button.
AV30U.book 15 ページ ２００３年２月１４日 金曜日 List of Menus The figures of the Menus are for explanation purposes only, and they are different from the actual Menus. 午前１０時１４分 1 ª REC MODE 1 2 3 Still Picture Record Menu Picture quality [QUALITY] (l l 20) Flash setting [FLASH] (l 20) Beep sound [BEEP SOUND] When it is set to [ON], beeps for confirmation or alarm.
AV30U.book 16 ページ ２００３年２月１４日 金曜日 午前１０時１４分 ª PLAY MODE 1 2 3 4 Still Picture Playback Menu Beep sound setting [BEEP SOUND] (l l 15) Card editing [CARD EDITING] 1 Display setup [DISPLAY SETUP] (l l 15) P.Slide show [P.
AV30U.book 17 ページ ２００３年２月１４日 金曜日 Setting Date and Time At the time of purchase of the SD Multi AV Device, the date and time are not set ([PRESS MENU TO SET CLOCK] is displayed). First, set the date and time, then use the SD Multi AV Device. 1 2 3 4 5 6 7 Set the Power/Mode Switch to [REC]. 午前１０時１４分 1 2 PLAY OFF REC MENU 3 Press the [MENU] Button. Select [INITIAL SETUP] and press the [1 SET] Button. Select [CLOCK SET] and press the [1 SET] Button.
AV30U.book 18 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Setting the Power Supply Frequency Set the power supply frequency before using the SD Multi AV Device. The power supply frequency is different depending on the country or region. Adjustment of the frequency will help reduce the appearance of horizontal stripes consisting of light and dark patterns under fluorescent lighting. 1 2 3 4 1 2 PLAY OFF REC MENU 3 Set the Power/Mode Switch to [REC]. (l 13) Press the [MENU] Button.
AV30U.book 19 ページ ２００３年２月１４日 金曜日 Adjusting Brightness and Color Level on the LCD Monitor LCD Brightness [BRIGHTNESS] It adjusts the brightness of the image on the LCD screen. LCD Color Level [COLOR] It adjusts the color saturation of the image on the LCD screen. 午前１０時１４分 1 2 PLAY OFF REC MODE MENU 3 SETUP MENU QUALITY 1 2 3 4 5 6 Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE] or [MPEG4]. Press the [MENU] Button. Select [DISPLAY SETUP] and press the [1 SET] Button.
AV30U.book 20 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Basic Functions 1 PLAY OFF Recording Still Pictures REC MODE PICTURE Records still pictures. 1 2 3 4 5 6 Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE]. Press the [MENU] Button. 2 Set [QUALITY] to desired picture quality. 3,4 ≥Select one of [FINE], [NORMAL], or [ECONOMY]. To use the flash, Set [FLASH] to [ON] or [AUTO]. MENU SETUP MENU FLASH OFF BEEP SOUND OFF INITIAL SETUP Press the [MENU] Button.
AV30U.book 21 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Playing back Still Pictures Plays back still pictures recorded on the Memory Card. 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [PICTURE]. ≥Still picture files recorded on the Memory Card are displayed in the index picture screen. 1 OFF PLAY REC MODE 2 Press the UP/DOWN/LEFT/RIGHT side of the Multi-function Button to select a desired file. Press the [1 SET] Button. ≥A still picture file is played back.
AV30U.book 22 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Recording Moving Pictures (MPEG4) You can record moving pictures on the Memory Card. 1 2 3 4 Set the Power/Mode Switch to [REC] and set the operation mode to [MPEG4]. Press the [MENU] Button. 1 PLAY OFF REC MODE Set the [MPEG4 MODE] to desired picture quality. ≥Select one of [SUPER FINE], [FINE], [NORMAL], or [ECONOMY]. ≥Press the [MENU] Button after completing the setting. Press the Recording Start/Stop Button. 2 3 ≥Recording starts.
AV30U.book 23 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Playing Back Moving Pictures (MPEG4) Plays back moving pictures recorded on the Memory Card. 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [MPEG4]. ≥Still picture files recorded on the Memory Card are displayed in the index picture screen. 1 OFF PLAY REC MODE 2 Press the UP/DOWN/LEFT/RIGHT side of the Multi-function Button to select a desired file. Press the [1 SET] Button. ≥A moving picture file is played back.
AV30U.book 24 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Recording Voice (Voice Recording Function) You can record voice data on the Memory Card. 1 2 3 Set the Power/Mode Switch to [REC] and set the operation mode to [VOICE]. Press the Recording Start/Stop Button. OFF PLAY REC MODE VOICE ≥Recording starts. Speak into the built-in microphone 1 of this SD Multi AV Device. ≥While recording voice, press the Recording Start/Stop Button to stop recording. ≥The LCD Monitor will shut off approx.
AV30U.book 25 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Hearing the Voice Recorded (Voice Playback) Plays back the voice files recorded by the SD Multi AV Device. 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [VOICE]. ≥Voice files recorded on the Memory Card are displayed in the form of a list. Press the UP/DOWN side of the Multifunction Button to select a desired file. Press the [1 SET] Button.
AV30U.book 26 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Listening to Music (Music Playback) You can play MPEG-2 AAC and MP3 data. Music files must be written on the SD Memory Card using the SD-Jukebox Ver.3.0 (supplied accessory) special software program in order for the SD Multi AV Device to play music. For the SD-Jukebox Ver.3.0, refer to Page 40 and the operating instructions for the SDJukebox Ver.3.0 in PDF format installed with the software.
AV30U.book 27 ページ ２００３年２月１４日 金曜日 ª Selecting a Playlist Playlists set using the SD-Jukebox Ver.3.0 can be played back. Select a desired playlist in [SELECT PLAYLIST] of the menu. 1 午前１０時１４分 1 SELECT PLAYLIST DEFAULT PLAYLIST PLAYLIST -1 PLAYLIST -2 PLAYLIST -3 ª Selecting a desired Sound Quality Music quality can be selected with the supplied Remote Controller. (Use earphones, or the audio cannot be heard.) Press the [EQ] button on the Remote Controller.
AV30U.book 28 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Advanced Functions Backlight Compensation Function This prevents a recording subject from being recorded too dark in backlight. (Backlight is the light that shines from behind a recording subject.) 1 2 Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE] or [MPEG4]. Press [ª] for approx. 1 second. 1 OFF PLAY OFF PLAY REC MODE 2 ≥The [ª] Indication is displayed. ≥Press [ª] for approx.
AV30U.book 29 ページ ２００３年２月１４日 金曜日 Erasing the Files Recorded on a Memory Card Using SD Multi AV Device, you can erase files recorded on the Memory Card. After files are erased, it cannot be restored. 1 2 3 4 5 午前１０時１４分 1 Play back the file to be erased or let it pause. (l 21, 23, 25) Press the [MENU] Button. ≥The editing menu screen appears. Press the UP/DOWN side of the Multifunction Button until [ERASE CARD FILE] is displayed. Press the LEFT/RIGHT side of the Multifunction Button to select [YES].
AV30U.book 30 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Protecting files (File Protection) 1 Precious files recorded on the Memory Card can be locked to prevent accidental erasure. 1 2 3 4 5 Play back the file to be locked or let it pause. (l 21, 23, 25) Press the [MENU] Button. ≥The editing menu screen appears. Press the UP/DOWN side of the Multifunction Button until [FILE PROTECTION] is displayed. Press the LEFT/RIGHT side of the Multifunction Button to select [LOCK]. Press the [1 SET] Button.
AV30U.book 31 ページ ２００３年２月１４日 金曜日 午前１０時１４分 1 Writing Printing Data on a Memory Card (DPOF Setting) DPOF Setting Printing data (DPOF Setting), such as the number of images to be printed, can be written to the Memory Card. 1 2 3 4 Play back a still picture to be DPOF-set. (l 21) Press the [MENU] Button. ≥The editing menu screen appears. 2 MENU 3,4 Press the the UP/DOWN side of the Multifunction Button until [DPOF SETTING] is displayed.
AV30U.book 32 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Playing back still pictures one by one (P.Slide Show) Plays back still pictures based on the Slide show data set by SD-MovieStage Ver.2.0 (supplied). 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [PICTURE]. Press the [MENU] Button. 1 Select the [P.SLIDE SHOW] and press the [1 SET] Button. 3 ≥P.Slide show starts. ≥Pictures set with SD-MovieStage are sequentially displayed, each for approx. 5 seconds, and the P.Slide show stops.
AV30U.book 33 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Formatting the Memory Card If a Memory Card becomes unreadable by the SD Multi AV Device, formatting it may make it reusable. Formatting erases all the data recorded on the Memory Card. 1 2 3 4 5 Set the Power/Mode Switch to [REC]. 1 PLAY OFF REC Press the [MENU] Button. Select [INITIAL SETUP] and press the [1 SET] Button. Select [CARD FORMAT] and press the [1 SET] Button. 2 MENU 3 ≥A verification message appears . Select [YES] to be formatted.
AV30U.book 34 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Using the AV Cradle Fitting on the AV Cradle eases charging. The AV Cradle allows the Device to be connected to the external device, such as a TV in order for the pictures on this Device to be viewed on the TV. The AV Cradle also allows the pictures on an external device to be recorded on a Card using the timer function. ≥The charging configuration is the same as the one for connecting the DC Input Lead to the SD Multi AV Device.
AV30U.book 35 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Fitting on the AV Cradle 1 2 3 4 5 While pressing the [PUSH1] Button, extend the AV Cradle. Place the SD Multi AV Device on the AV Cradle. 1 ≥The grooves 1 of the SD Multi AV Device fit in the leading protrusions 2. ≥Place the SD Multi AV Device on the AV Cradle so that the mating connectors 3 are in alignment. Push the SD Multi AV Device until you hear it click. Connect the AC Adaptor to the AC main socket. Connect the DC Input Lead to the [DC IN 4.
AV30U.book 36 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Playing Back on an external device By connecting the SD Multi AV Device in AV Cradle with an external device, the recorded scenes can be played back on an external device such as a TV or Audio device. 1 3 AV IN SD 4 AV OUT SD PLAY AV IN AV OUT AV OUT 2 AV IN 2 1 2 3 4 5 6 36 LCD MONITOR 1 Put the SD Multi AV Device in the AV Cradle.
AV30U.book 37 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Useful Connection (AV Cradle always connected) If your external device has just one output socket, you can connect the SD Multi AV Device as follows. ª Sample 1 Details of the connection To view or listen to pictures or sounds recorded on a Card by an external device, refer to Page 36. To record pictures from an external device onto a Card, refer to Page 38. . AV IN SD AV OUT AV IN AV OUT LCD MONITOR SD PLAY DC IN 4.
AV30U.book 38 ページ ２００３年３月５日 水曜日 午後１時３分 Recording pictures supplied from an external device AV IN SD AV OUT AV IN AV OUT LCD MONITOR SD PLAY DC IN 4.8V AV OUT AV IN 1 2 3 4 5 6 7 Put the SD Multi AV Device in the AV Cradle. (l 35) Connect the [AV IN] socket of the AV Cradle to the AV Output Sockets of the external device 2 using supplied AV Cable 1. Set the AV Input Control Switch to [AV IN SD]. Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE] or [MPEG4].
AV30U.book 39 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Using Auto Recording Function When the input signal is detected, the recording starts automatically. 4 1 Connect the SD Multi AV Device with the external device. (l 38) 5 ≥Always use the AC adaptor. This function does not work with the battery alone. 6 2 3 4 5 6 7 8 9 Set up the external device such as timer setting. Confirm that the image or sound signal is not output. Set the Power/Mode Switch to [REC] and set the operation mode to [MPEG4].
AV30U.book 40 ページ ２００３年２月１４日 金曜日 午前１０時１４分 On a Personal Computer About the supplied software ª About the supplied software The SD Multi AV Device comes with SD-Jukebox Ver.3.0, SD-MovieStage Ver.2.0, and a USB driver to allow the SD Multi AV Device to be used on a personal computer. By using these software packages, you can record high-quality music which can be played back in the [MUSIC] mode of the SD Multi AV Device (SD-Jukebox Ver.3.
AV30U.book 41 ページ ２００３年２月１４日 金曜日 午前１０時１４分 ≥A USB hub or USB card used for connection does not guarantee a normal operation. Use the attached USB cable for direct connection to the personal computer. ≥Before installing (or uninstalling), quit all other applications. If the launcher for installation is not activated automatically when the CD-ROM is inserted in the personal computer’s CD-ROM drive, double-click the CD-ROM icon in [My Computer].
AV30U.book 42 ページ ２００３年２月１４日 金曜日 午前１０時１４分 SD-MovieStage ª Features of SD-MovieStage Ver.2.0 ≥MPEG4 moving pictures (ASF-format files) and still pictures (JPEG pictures) recorded on the SD Multi AV Device are displayed in thumbnail form and can be easily played back on a personal computer. ≥MPEG4 moving pictures (ASF-format files) can be cut-edited. ≥Pictures recorded on other DV devices can be converted into those for the SD Multi AV Device. ≥E-mails with moving pictures attached can be easily sent.
AV30U.book 43 ページ ２００３年２月１４日 金曜日 午前１０時１４分 SD-Jukebox ª Features of SD-Jukebox Ver.3.0 ≥Records high quality music onto an SD Memory Card that can be played back on the SD Multi AV Device. ≥Allows Playlists to be created containing your favorite tracks. (If a Playlist is selected, only the tracks in the Playlist are played back.) ≥Allows a still picture to be associated with the music data. ª System Requirements for SD-Jukebox Ver.3.
AV30U.book 44 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Installing USB Driver 2 When the USB driver is installed, the SD Multi AV Device will be recognized by the personal computer. Do not connect the USB cable until the USB driver has been installed. ≥Please read [Read before you install] before installing the USB Driver. 1 2 3 Insert the supplied CD-ROM into the personal computer’s CD-ROM drive. ≥The launcher for installation is activated automatically. 3 Click [USB Driver]. Click [Finish].
AV30U.book 45 ページ ２００３年２月１４日 金曜日 Installing SD-Jukebox Ver.3.0 1 Insert the supplied CD-ROM into the 午前１０時１４分 2 personal computer’s CD-ROM drive. 2 3 4 5 ≥The launcher for the installation is activated automatically. Click [SD-Jukebox Ver.3.0]. ≥When [Welcome] screen appears, click [Next]. ≥If the confirmation whether you have the right to administrate the personal computer is displayed, click [OK] and continue with installation.
AV30U.book 46 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Connecting with the PC ≥Connect the USB cable after the USB driver is installed. ≥Use both the AC adaptor and the battery. Either one alone does not allow the SD Multi AV Device to be used with a personal computer. 1 2 3 4 Slide down the USB Terminal Cover to open it. Set the Power/Mode Switch to [PLAY]. Connect with the AC Adaptor 1.
AV30U.book 47 ページ ２００３年２月１４日 金曜日 Disconnecting the USB Cable safely If you use Windows XP/2000, remove the USB Cable using the following method. If you use Windows Me/98SE, check that the Card Access Lamp is out, then remove the USB Cable. (Keep the SD Multi AV Device turned on.) 1 2 3 Double click the 午前１０時１４分 1 2 in task tray. ≥Hardware disconnect dialog box appears. Select [USB Mass Storage Device] and click [Stop]. Click [OK]. ≥Click [OK], and you can safely disconnect the cable.
AV30U.book 48 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Constructing a Folder when the Memory Card is used with a PC ≥When the Memory Card with data recorded by the SD Multi AV Device is inserted into a personal computer, folders will be displayed as in the figure. ≥Use the SD-MovieStage Ver.2.0 for operating files in the Memory Card. [DCIM]: [MISC]: [SD_VIDEO]: [SD_VOICE]: [SD_AUDIO]: 48 The images (IMGA0001.JPG etc.) in this folder are recorded in the JPEG format.
AV30U.book 49 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Others Charge the built-in battery for maintaining the date information This built-in battery is used for the memory of date and time. If [PRESS MENU TO SET CLOCK] is displayed when the power is on, the built-in battery may be exhausted. Charge using the following procedure: 1 2 1 Take the battery out and plug in the AC adaptor. (l 10) Turn the power off and leave the SD Multi AV Device as it is for approx. 12 hours.
AV30U.
AV30U.book 51 ページ ２００３年２月１４日 10 Indication of recordable time and recordable number of images R 0: Number of remaining recordable still pictures (Lights in red when it reaches zero.) R 0h00m: Remaining recordable time for MPEG4 moving pictures or audio (VOICE) (Lights up in red when it reaches 0h00m.) 11 Sound quality indication (music files) Pressing the [EQ] button on the remote controller indicates the sound quality to be set.
AV30U.book 52 ページ ２００３年２月１４日 Notes & Precautions ª Cautions for Use When you use your SD Multi AV Device on a rainy or snowy day or on a beach, make sure that no water or moisture enters the SD Multi AV Device. ≥Water may cause the SD Multi AV Device or Memory Card to malfunction. (Irreparable damage may occur.) ≥If sea water splashes onto the SD Multi AV Device, wet a soft cloth with tap water, wring it well, and use it to wipe the camera body carefully.
AV30U.book 53 ページ ２００３年２月１４日 After use, be sure to take the Memory Card out and detach the Battery from the SD Multi AV Device or pull out the AC Main Lead from AC Main socket. If the Battery is used in an extremely cold environment, the Battery may only operate for approx. 5 minutes. If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while. ª About the Lens ≥Do not touch the lens.
AV30U.book 54 ページ ２００３年２月１４日 Be Sure to Detach the Battery after Use Be sure to detach the Battery from the SD Multi AV Device. (If it is left attached to the SD Multi AV Device, a minute amount of current is consumed even when the SD Multi AV Device power is off.) If the Battery is left attached to the SD Multi AV Device for a long time, over discharge takes place. The Battery may become unusable after it is charged. Disposing of an Unusable Battery ≥The Battery has a limited life.
AV30U.book 55 ページ ２００３年２月１４日 ª State of Power Lamp while charging The Power Lamp flashes while charging. (Flashes approx. every 2 seconds when charging is normal.) When the Power Lamps flashes more quickly or slowly (or turns off), some abnormality may have occurred. The flashing speed suggests the following states. Flashing approx. every 0.5 seconds: ≥The SD Multi AV Device, battery or AC adaptor may be defective. Contact your nearest Panasonic dealer. Flashing approx.
AV30U.book 56 ページ ２００３年２月１４日 金曜日 午前１０時１４分 ≥Electrical noise, static electricity or failure of the SD Multi AV Device or the Memory Card may damage the Memory Card or erase the data stored on the Memory Card. It is recommended to save important data onto a personal computer. ≥Some cards may pop out when they are removed. ≥When the SD Multi AV Device is not turned [OFF] (is in the standby mode), press the [ ■ /1 ● ] button on the remote controller to activate it.
AV30U.book 57 ページ ２００３年２月１４日 ≥Irrespective of the setting, the horizontal stripes may appear in the following cases. -When using the SD Multi AV Device to record pictures under a lighting instrument such as a high-frequency fluorescent lamp: -When using the SD Multi AV Device to record a lighting instrument such as a fluorescent lamp: ≥It is not possible to use Backlight Compensation Mode when this mode is activated. ≥The SD Multi AV Device adjusts the brightness by varying the shutter speed.
E-AV20text3.fm 58 ページ ２００３年２月１４日 ≥The MPEG4 moving pictures can be recorded in any mode, but moving pictures recorded in the [SUPER FINE], [FINE] or [NORMAL] mode may not be played on other Panasonic digital video cameras. The message [PUSH THE RESET SWITCH] may be displayed on some Panasonic digital video cameras in such a case. This is not a fault of the SD Multi AV Device. ≥The MPEG4 moving pictures recorded in the [ECONOMY] mode may not be played, if it was a short recording (4 seconds or shorter).
AV30U.book 59 ページ ２００３年２月１４日 ª Hearing the Voice Recorded (Voice Playback) (l 25) ≥The screen shows a simple black background. ≥Fast forward (or fast backward) will be reset to normal playback at the beginning of the next file. ª Listening to Music (Music Playback) (l 26) ≥Only the MPEG2-AAC and MP3 data recorded using SD-Jukebox Ver.3.0 (supplied accessory) are applicable to play on your SD Multi AV Device. ≥This SD Multi AV Device alone does not allow tracks to be recorded or deleted.
AV30U.book 60 ページ ２００３年２月１４日 ≥The White Balance may not be adjusted in dark places. ≥Adjustment of White Balance is effective under the following conditions. -When recording under reddish lighting (halogen light bulb, incandescent light bulb, etc.). -When recording a picture of mono-tone color. -When recording under multiple light sources. ª Erasing the Files Recorded on a Memory Card (l 29) ≥Erased files cannot be restored. ≥This SD Multi AV Device cannot erase any music files (MP3 and MPEG2-AAC).
AV30U.book 61 ページ ２００３年２月１４日 ª Playing back still pictures one by one (P.Slide Show) (l 32) ≥Playback time may take longer than usual depending on the picture. ≥If the P. Slide show data is not recorded on the Memory Card, the display reverts to the index picture screen. ≥The time for the Slide show set by SDMovieStage Ver.2.0 is not applied to the SD Multi AV Device. ª Formatting the Memory Card (l 33) ≥Normally, it is not necessary to format the Memory Card.
AV30U.book 62 ページ ２００３年２月１４日 ª Recording pictures supplied from an external device (l 38) ≥Pictures containing the copy-protect signal (copy guard) cannot be recorded. ≥The power is automatically turned off in approx. 10 minutes after the SD Multi AV Device stops. Turn the power ON again. ≥VOICE from an external device cannot be recorded. ≥In the [REC] mode, video or audio is not output from the [AV OUT] terminal, irrespective of the setting of the AV Output Control Switch.
AV30U.book 63 ページ ２００３年２月１４日 ≥If the personal computer switches to the suspend mode when the SD Multi AV Device is connected to it, the personal computer may not recognize the SD Multi AV Device when it reverts to normal mode. In this case, restart the personal computer. ≥Do not use other applications to access the CD that you are recording from or playing back with the SD-Jukebox Ver.3.0 (supplied). ≥While SD-MovieStage Ver.2.
AV30U.book 64 ページ ２００３年２月１４日 Before Requesting Service Power 1: The SD Multi AV Device power cannot be turned on. 1-1: Is the power source connected correctly? 1-2: Is the Battery fully charged? Charge it with the AC Adaptor. 2: The SD Multi AV Device power shuts off automatically. 2: If you do not use the SD Multi AV Device for more than 10 minutes, the power shuts off automatically to save the Battery power. 3: The SD Multi AV Device power does not stay on long enough.
AV30U.book 5: 65 ページ ２００３年２月１４日 During Playback an [k] Indication is displayed. 5: The data was either recorded in a different format, or data is damaged. 6: Even if a Memory Card is formatted, it cannot be used. 6: Either the SD Multi AV Device or the Memory Card may be damaged. Please consult your Panasonic dealer. 7: Playing back or recording do not function and the screen has frozen. 7: Set the Power/Mode Switch to [OFF] and then set it back to [REC] or [PLAY] after a while (approx.1 minute).
AV30U.book 4: 4: 66 66 ページ ２００３年２月１４日 When the USB cable is removed when Windows Me is used, Device removal warning appears. If the USB cable is connected without installing the USB Driver (supplied) when you use Windows Me, the warning message will appear as soon as the USB cable is pulled out. Install the USB Driver, and the warning message will not appear. For how to disconnect the USB cable on Windows XP or Windows 2000, refer to page 47.
AV30U.book 67 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Specifications SD Multi AV Device (Panasonic SV-AV30U) Power Source: Power Consumption: Image Sensor: Lens: Monitor: Microphone: Standard Illumination: Minimum Required Illumination: Recording Media: Image Compression: Video Compression: Voice Compression: Music Expansion: Dimensions: Weight: Operating Temperature: Operating Humidity: Information for your safety DC 4.8 V (AC Adaptor) DC 3.
AV30U.book 68 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Limited Warranty (For U.S.A. Only) Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
AV30U.book 69 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
AV30U.book 70 ページ ２００３年２月１４日 金曜日 午前１０時１４分 Customer Services Directory (For U.S.A. Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquires please contact: 1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST. or send e-mail: consumerproducts@panasonic.com Web Site: http://www.panasonic.com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.
